Perfmon report.html missing

Hello Guys,
I've configured perfmon to run for an hour with the memory and cpu counters,
Workflow,
1.The perfmon is scheduled to run from 10 to 11 GMT.
2.Once the run completes it calls a Scheduled Task "\MICROSOFT\WINDOWS\sendMail" and this script would compress the files generated and sends a mail to users as requested.
3.The script works fine and sends the mail with zip'd  content.
The problem is sometimes the report.html gets generated and sometimes not.
There is no problem with the script and perfmon schedule as report.html is defined in reports tab.
Is there any lag in creating this? I have already enabled a 5 min wait period in my script just in case., but even that isn't helping.
I am planning to do some more random runs and see if it might take time and if so I would see if this report can be delayed by a day.
But I would like to understand if this is a common thing.
Regards,
V.
Venu

Hi,
Which operating system do you run? If you run Perfmon.exe with the Active Directory Diagnostics template to generate a report on a Windows Server 2008-based domain controller, the process may stop responding.
For more detailed information, you could refer to the article below:
Issues with Perfmon reporting - Turning ETL into HTML
http://blogs.msdn.com/b/canberrapfe/archive/2012/07/06/issues-with-perfmon-reporting-turning-etl-into-html.aspx
There is a similar thread, please go through it to help troubleshoot this issue:
Perfmon Report
https://social.technet.microsoft.com/forums/windowsserver/en-US/57bd2397-7ca1-48e8-9824-1d6ad761558d/perfmon-report
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • About perfmon report interpretation

    hello every one greetings to all and i want to ask some questions related to perfmon report interpretation and here is my question.
    first i have created data collector set of Process for sql server(ssms.exe) to measure process time and private byte of the ssms.exe which is the sql server management studio, i have strted the data collector set and i have excuted query on SQL server and
    the collected log file has been saved on my desktop then i got html reports of perfmon  and as well report on the perfmon side and what i want is an explanation on how to interpret this report corresponding to the SSMS.exe process and here is what my
    report looks like and i need help on this 
    and here is what the HTML report has shown me
    any help will be appreciated 

    the reason i want to measure the Process SSms is to measure how much CPU and RAM the SQL SERVER is Consuming. any other help or methods i can follow as a suggestion will be helpful to me and 10Q for your reply
    Now this seems like a question. Before that, I guess you are quite new to SQL Server and there is no point in using perfmon counter values to gauge SQL Server performance if you are newbie.
    You must first learn basics( pardon me If I am wrong but from your question it seems) interpreting perfmon data does require bit of expertise and what may seem normal to us sometimes may point to some anomaly and to analyze it correctly we require more information
    but seeing the report every thing looks normal.
    Now you said you want to monitor CPU and Memory usage its easy.
    To monitor memory usage use below query( If you have SQL Server 2008 and above)
    select
    (physical_memory_in_use_kb/1024)Memory_usedby_Sqlserver_MB,
    (locked_page_allocations_kb/1024 )Locked_pages_used_Sqlserver_MB,
    (total_virtual_address_space_kb/1024 )Total_VAS_in_MB,
    process_physical_memory_low,
    process_virtual_memory_low
    from sys. dm_os_process_memory
    To see CPU utilized by SQL Server you can open task manager and see CPU utilization of process SQLServer.exe or you can as well use perfmon counter mentioned in below link
    http://msdn.microsoft.com/en-us/library/ms178072.aspx
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Standard Report for missing parts at production order operation level?

    Hi PP Gurus,
                We have standard report for missing parts at production orders level.
    For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
    Please help.
    Thanks,
    Reddy.

    Hi Arvind,
          Thanks for for your response.
    1. List: Components,  Layout: Standard layout          set the Missing part
           It shows the component requirement/withdrawn  quantity for each operation of production order. It is not showing the commit quantity.
    2. List: Components,  Layout: Pick list          set the Missing part
           It shows the component requirement/withdrawn  quantity for each production order.
    3. List: Components,  Layout: Missing Parts List-Material View          set the Missing part
           It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
    4. List: Components,  Layout: Missing Parts List-Order View          set the Missing part
           It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
          We are unable to get the solution from all these 1 to 4 reports from COOIS.
    Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
    If avilable, what is the procedure to be followed?
    Thanks,
    Reddy.

  • Reports 10g Missing information during file conversion

    I have a large report that includes several graphs that keeps giving me an error during conversion that says the report is missing information and cannot create the file. I have never seen this before this report. It is actually giving me the message REP-1067 Some information is missing in the report. It just seems to happen when I add another graph. There is no information on REP-1067 in searching in the forums which does not give me a lot of hope.. Anyone have any ideas where to look. Report Builder 10g, Database 10g.
    There are already several graphs in the report, so I don't believe it is a graphing issue.
    Edited by: jdev_p8baller on Nov 11, 2011 1:00 PM

    Hi,
    check this if it is helpful.
    TABLES: likp, lips,itcpo.
    DATA: pdftab type standard TABLE OF tline,
    datab TYPE standard TABLE OF itcoo.
    itcpo-tdgetotf = 'X'.
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
    DEVICE = 'PRINTER'
    DIALOG = 'X'
    FORM = 'Z1989_PRAC'
    LANGUAGE = SY-LANGU
    OPTIONS = itcpo
    // call script using start_form and write_form.
    CALL FUNCTION 'END_FORM'
    IMPORTING
    RESULT = gi_ofc
    CALL FUNCTION 'CLOSE_FORM'
    TABLES
    OTFDATA = datab
    EXCEPTIONS
    UNOPENED = 1
    BAD_PAGEFORMAT_FOR_PRINT = 2
    SEND_ERROR = 3
    SPOOL_ERROR = 4
    CODEPAGE = 5
    OTHERS = 6
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
    FORMAT = 'PDF'
    IMPORTING
    BIN_FILESIZE = BINFILE
    TABLES
    otf = datab
    lines = pdftab
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE = binfile
    filename = 'D:\MYFILE.PDF' //give the address where u want output.
    FILETYPE = 'BIN'
    tables
    data_tab = pdftab
    Regards
    Rajesh Kumar

  • CO-PC Drilldown Reports are Missing

    In the process of creating new Drilldown Reports, it appeared that some Standard Reports were missing, so I reimported the reports from Client 000.  Now I cannot access an of my reports.  I have an entirely different menu in KKO0 and I think it reset something to prior to version 4.0 (we're on 4.6c) whan the trees changed.  All of the reports are still visible in the Tables, but not in any of the reporting trees.  ANd if I try to run a report such as S_ALR_87013151 - Actual/WIP: Aggregated - I received errors that the report does not exist.  Does anyone have any ideas?
    Thank You Pam

    I ran the Import program (RKCOBTR3) in DEBUG and stumbled across RKKBOLDR. 
    SAP also send me a message in reference to this, this morning.  See Below:
    Regards... Pam
    +I guess you run (by accident) the report RKKBOLDR - this will switch+
    +the kko0 reports to the old style of release 2.2. So please execute the+
    +report RKKBOLDR via transaction SA38 - then you should get a message+
    +KN 194 that the product drilldown uses KKROBJ records. After this the+
    +issue should be fixed (maybe you need to re-import the standard reports+
    +via the kko0 menue - environment - import reports again from client 000.+
    +Kind regards,+
    +Christian Gaertner+
    +(development SAP)+
    +PS: With the execution of RKKBOLDR you can switch between the old+
    +product drilldown reports based on KKBOB and the new based on KKROBJ.+

  • PerfMon reporting dramatic disk access time increase on Oracle startup

    Hi,
    My oracle 10g (10.2.0.4) database is hosted on a windows 2003 server.
    The datafiles are stored on a RAID1 disk array, on a dedicated partition : currently 30 gigs free out of 180, wich should not be a concern unless i'm wrong, because the datafiles were created as 10 Go files with no autogrowth. I add a new datafile whenever i need more room for my tables (alerts when 80% used).
    Since 2 days i experience a dramatic performance loss :
    The EM console reports nothing special (no alarms related to storage) apart from the need for more paginated memory.
    I issue a reorg when the segmentation advisor suggests it.
    My optimizer statistics are calculated by the default scheduled job.
    The weird thing I noticed is that as soon as I start the database, there's a huge increase in disk activity even though no query at all is submitted to the database.
    PerfMon reports Current Disk Queue Length > 1000 and disk access time > 3000 ms
    CPU is 2% activity on the 4-cpus server.
    I have plenty of spare memory (currently 3 Go used out of 16).
    This is only a dev server for ETL processes, it has very few concurrent connections.
    Any suggestions welcome.
    AWR report is available here
    http://min.us/mqnXQhd5Z
    Edited by: user10799939 on 22 mars 2012 09:30

    Cache Sizes
    ~~~~~~~~~~~                       Begin        End
                   Buffer Cache:     1,296M     1,296M  Std Block Size:         8K
               Shared Pool Size:       160M       160M      Log Buffer:    14,364K
    Load Profile
    ~~~~~~~~~~~~                            Per Second       Per Transaction
                      Redo size:            460,955.72 ;         2,477,358.63
                  Logical reads:              3,392.16 ;            18,230.80
                  Block changes:              6,451.93 ;            34,675.22
                 Physical reads:                  2.92 ;                15.67
                Physical writes:                394.52 ;             2,120.28
                     User calls:                  1.69 ;                 9.08
                         Parses:                  3.31 ;                17.81
                    Hard parses:                  0.17 ;                 0.90
                          Sorts:                  1.32 ;                 7.09
                         Logons:                  0.06 ;                 0.31
                       Executes:                  7.01 ;                37.68
                   Transactions:                  0.19
      % Blocks changed per Read:  190.20 ;   Recursive Call %:    96.23
    Rollback per transaction %:    0.30 ;      Rows per Sort:    14.41
    Instance Efficiency Percentages (Target 100%)
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                Buffer Nowait %:   99.98 ;      Redo NoWait %:   99.86
                Buffer  Hit   %:   99.92 ;   In-memory Sort %:  100.00
                Library Hit   %:   96.30 ;       Soft Parse %:   94.96
             Execute to Parse %:   52.74 ;        Latch Hit %:   99.07
    Parse CPU to Parse Elapsd %:    0.35 ;    % Non-Parse CPU:   99.30
    Shared Pool Statistics        Begin    End
                 Memory Usage %:   75.48 ;  75.51
        % SQL with executions>1:   79.92 ;  85.03
      % Memory for SQL w/exec>1:   77.07 ;  70.09
    Top 5 Timed Events                                         Avg %Total
    ~~~~~~~~~~~~~~~~~~                                        wait   Call
    Event                                 Waits    Time (s)   (ms)   Time Wait Class
    db file sequential read               9,052      17,688   1954   51.3 ;  User I/O
    log file switch (checkpoint in        5,303       4,649    877   13.5 Configurat
    log file switch completion            4,245       4,023    948   11.7 Configurat
    wait for a undo record               32,393       3,531    109   10.3 ;     Other
    db file parallel write               18,771       3,437    183   10.0 System I/O Havent seen this much wait on average. For example 877ms for "log file switch" is over threshold. And other wait events too..
    Time Model Statistics                DB/Inst: MDMPRJ/MDMPRJ  Snaps: 2840-2841
    -> Total time in database user-calls (DB Time): 34446.5s
    -> Statistics including the word "background" measure background process
       time, and so do not contribute to the DB time statistic
    -> Ordered by % or DB time desc, Statistic name
    Statistic Name                                       Time (s) % of DB Time
    sql execute elapsed time                              4,008.5 ;        11.6
    parse time elapsed                                      352.9 ;         1.0
    hard parse elapsed time                                 352.7 ;         1.0
    PL/SQL compilation elapsed time                         120.1 ;          .3
    DB CPU                                                   61.8 ;          .2
    failed parse elapsed time                                21.3 ;          .1
    PL/SQL execution elapsed time                             8.0 ;          .0
    connection management call elapsed time                   0.0 ;          .0
    hard parse (sharing criteria) elapsed time                0.0 ;          .0
    repeated bind elapsed time                                0.0 ;          .0
    hard parse (bind mismatch) elapsed time                   0.0 ;          .0
    DB time                                              34,446.5 ;         N/A
    background elapsed time                              14,889.7 ;         N/A
    background cpu time                                      39.0 ;         N/A
    Wait Class                            DB/Inst: MDMPRJ/MDMPRJ  Snaps: 2840-2841
    -> s  - second
    -> cs - centisecond -     100th of a second
    -> ms - millisecond -    1000th of a second
    -> us - microsecond - 1000000th of a second
    -> ordered by wait time desc, waits desc
                                                                      Avg
                                           %Time       Total Wait    wait     Waits
    Wait Class                      Waits  -outs         Time (s)    (ms)      /txn
    User I/O                       10,515     .1           17,785    1691      15.8
    Configuration                  10,186   79.5 ;           8,865     870      15.3
    System I/O                     27,619     .0            8,774     318      41.6
    Other                          57,768   98.3 ;           6,915     120      87.0
    Commit                          2,634   88.6 ;           2,481     942       4.0
    Concurrency                     2,847   75.4 ;           2,240     787       4.3
    Application                       219    2.3 ;              23     105       0.3
    Network                         4,790     .0                0       0       7.2
              ------------------------------------------------------------- again seen, there is very high wait on User IO
    Wait Events                          DB/Inst: MDMPRJ/MDMPRJ  Snaps: 2840-2841
    -> s  - second
    -> cs - centisecond -     100th of a second
    -> ms - millisecond -    1000th of a second
    -> us - microsecond - 1000000th of a second
    -> ordered by wait time desc, waits desc (idle events last)
                                                                       Avg
                                                 %Time  Total Wait    wait     Waits
    Event                                 Waits  -outs    Time (s)    (ms)      /txn
    db file sequential read               9,052     .0      17,688    1954      13.6
    log file switch (checkpoint           5,303   78.0 ;      4,649     877       8.0
    log file switch completion            4,245   89.2 ;      4,023     948       6.4
    wait for a undo record               32,393   99.8 ;      3,531     109      48.8
    db file parallel write               18,771     .0       3,437     183      28.3
    wait for stopper event to be         24,203   99.8 ;      2,634     109      36.5
    log file sync                         2,634   88.6 ;      2,481     942       4.0
    control file sequential read          7,356     .0       2,431     330      11.1
    buffer busy waits                     2,513   83.1 ;      2,173     865       3.8
    log file parallel write                 520     .0       1,566    3012       0.8
    control file parallel write             840     .0       1,334    1588       1.3
    rdbms ipc reply                         172   91.3 ;        330    1916       0.3
    enq: CF - contention                    309   23.0 ;        268     867       0.5
    log buffer space                        638   28.5 ;        192     301       1.0
    enq: PS - contention                     52   23.1 ;         71    1362       0.1
    db file scattered read                  113     .0          67     590       0.2
    os thread startup                        76   77.6 ;         63     834       0.1
    reliable message                         57   78.9 ;         50     878       0.1
    enq: RO - fast object reuse              22   22.7 ;         23    1038       0.0
    latch free                              537     .0          16      30       0.8
    Streams AQ: qmn coordinator               3  100.0 ;         15    5005       0.0 Overstepping
    Background Wait Events               DB/Inst: MDMPRJ/MDMPRJ  Snaps: 2840-2841
    -> ordered by wait time desc, waits desc (idle events last)
                                                                       Avg
                                                 %Time  Total Wait    wait     Waits
    Event                                 Waits  -outs    Time (s)    (ms)      /txn
    db file parallel write               18,772     .0       3,437     183      28.3
    events in waitclass Other            24,367   99.5 ;      3,010     124      36.7
    control file sequential read          6,654     .0       2,333     351      10.0
    log file parallel write                 520     .0       1,566    3012       0.8
    control file parallel write             840     .0       1,334    1588       1.3
    buffer busy waits                       899   94.2 ;        884     984       1.4
    log file switch (checkpoint             206   82.0 ;        185     898       0.3
    os thread startup                        76   77.6 ;         63     834       0.1
    log file switch completion               46   93.5 ;         45     982       0.1
    log buffer space                        158   31.0 ;         12      77       0.2
    db file sequential read                  62     .0           7     111       0.1
    db file scattered read                   20     .0           6     318       0.0
    direct path read                        660     .0           5       7       1.0
    log file sequential read                 66     .0           4      65       0.1
    log file single write                    66     .0           1      16       0.1
    enq: RO - fast object reuse               2     .0           0      38       0.0
    latch: cache buffers chains               3     .0           0       6       0.0
    direct path write                       660     .0          -5      -8       1.0
    rdbms ipc message                     9,052   87.5 ;     21,399    2364      13.6
    pmon timer                            1,318   90.4 ;      3,562    2703       2.0
    Streams AQ: qmn coordinator             633   97.6 ;      3,546    5602       1.0
    Streams AQ: waiting for time             77   61.0 ;      3,449   44795       0.1
    PX Deq: Join ACK                         21     .0           0       0       0.0 Again overshooting
    Tablespace IO Stats                  DB/Inst: MDMPRJ/MDMPRJ  Snaps: 2840-2841
    -> ordered by IOs (Reads + Writes) desc
    Tablespace
                     Av      Av     Av                       Av     Buffer Av Buf
             Reads Reads/s Rd(ms) Blks/Rd       Writes Writes/s      Waits Wt(ms)
    UNDOTBS1
               914       0 ######     1.0 ;   1,368,515      383      2,534  863.2
    MDMREF_INDICES
             6,918       2 ######     1.0 ;      11,086        3          0    0.0
    SYSAUX
               626       0 ######     1.1 ;       1,804        1          0    0.0
    SYSTEM
               850       0 ######     1.7 ;         296        0          0    0.0
    MDMREF_DATA
               293       0  712.3 ;    1.0 ;         274        0          0    0.0
    MDMPRJ_ODS
               198       0   72.1 ;    1.0 ;         198        0          0    0.0
    FEU_VERT
                33       0   61.5 ;    1.0 ;          33        0          0    0.0
    USERS
                33       0   31.5 ;    1.0 ;          33        0          0    0.0
              ------------------------------------------------------------- Now have a serious look at it. Av Rd(ms). Now for some tablespace value cannot event fit in window thats why its showing ##
    According to oracle recommendation Av Rd(ms) shouldn't be greater then 20, if its goes over 20 then its considered to be an issue with IO subsystem. But as its seen that in your case its overshooting.
    Now the question from my side
    Have done any configuration changes?
    I would suggest you to revert these changes asap and contact storage admin guys...
    Hope this helps

  • ADDING RADIO BUTTONS IN REPORT NEAR MISS (EHSM-NWBC)

    Hi Experts,
    I am new to this EHSM Enhancements , I have a requirement to add 3 radio buttons in Report Near Miss ( EHSM-NWBC ), I am not understanding this BOPF firm Enhancement .So please provided me the required information .
    Thanks & Regards.
    Bhushan K.   

    Hi Bhushan,
    If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
    Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
    In that Configuration you need to add field with display type Radio Button Group, with column count 3.
    Kindly refer the following snap for the same.
    Thanks and regards,
    Chetan P. Patil

  • EHS Report Near Miss  Webdynpro abap Enhancement.

    HI Experts,
    I need to add two fields in SAP EHS Report Near Miss Webdynpro abap application ( standard application ). Let me know how to Enhance the standard EHS Report Near Miss step by step.
    Thanks & Regards.
    Krishna.

    Hi Bhushan,
    If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
    Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
    In that Configuration you need to add field with display type Radio Button Group, with column count 3.
    Kindly refer the following snap for the same.
    Thanks and regards,
    Chetan P. Patil

  • Report Designer missing 'group level' area - GUI problem?

    Hi all -
    I have a few questions here that I think are related, so I'm posting in one thread.
    1)  As far as what I've been reading on, we can upgrade to BI 7.0 even with a front-end SapGUI 640 (patch 19).  True or False?
    2)  One can <u>only</u> use Report Designer with SapGUI 710.  True or False?
    And here's a long one...
    3)  When you open Report Designer  should we see "Group Level" on the right-hand side (if it's checked to show)?  Mine (having sapgui 710 at patch 1) was showing just the ruler, but not the "Group Level" areas... is this a gui issue?  What's the fix?
    [my history of GUI install:
    Before upgrade:  Sap GUI 640 patch 8
    After upgrade:  Installed NW4s BEx components only
    (then getting dumps in the r3 back-end) so installed SAP GUI 710 from 50083078_4 cd.
    Report Designer missing the group level areas... I thought, might as well install patch 01. But that did not help.]
    Any input would be great!
    Thanks guys (and girls!)!
    Cheers...

    1) As far as what I've been reading on, we can upgrade to BI 7.0 even with a front-end SapGUI 640 (patch 19). True or False?
    True
    2) One can only use Report Designer with SapGUI 710. True or False?
    False
    3) When you open Report Designer should we see "Group Level" on the right-hand side (if it's checked to show)? Mine (having sapgui 710 at patch 1) was showing just the ruler, but not the "Group Level" areas... is this a gui issue? What's the fix?
    I had a couple issues to 710 with the report designer. i didnt had anything similar to ur issue, but all my default and specifics of format catalog were blacked out and not allowing me to change that. I downgraded to 640 and everything works fine now. (I tried installing all possible latest and greatest on the GUI but nothing worked and it costed me a whole day to acknowledge the fact)

  • Formatting OBPM Process Report HTML Format

    Hi All,
    We have developed few processes in Business Process Composer and generated the Process Report HTML format. We found these reports need to be formatted as per our business need and are looking a way to alter/modify the format/layout for these HTML reports. Can any one please suggest how do we configure/alter/format the HTML at source level.
    Can any one suggest how to save the generated HTML report.
    --- Murthy

    Hi,
    When I run report( over 28000 pages) with same data set in linux environment then report still run normally.
    I can run this report in win2k3 env developer, but my customer can't run it(my customer also use application server 10gr2 in win2k3), number user of my customer is about 150 user.
    It isn't still work if I redirect report to another output. And I view Application Server -> Report Server then I see one job is running for a long time.
    Report Engine:
    Initial Engines (initEngine)     2
    Maximum Engines (maxEngine)     2
    Minimum Engines (minEngine)     1
    Maximum Jobs Before Shutdown (engLife)     50
    Maximum Idle Before Shutdown (maxIdle) (minutes)     30
    Cache Size (MB)     150
    Idle Timeout (minutes)     20
    Maximum Connections     20
    Maximum Queue Size     1000
    Trace Options: none
    Trace Mode: trace_replace
    Best regards
    Thanks.

  • Firefox 4.01 will not open in windows 7 after installing. Reports Profile missing

    I have asked this before. I installed 4.01 on windows 7. Everytime I attempt to open it the system reports a missing profile and will not open. Have we identified what is happening?

    # Please run "''firefox.exe -ProfileManager''" and try creating a new profile.
    # More information here: [[managing profiles]].

  • "Reporting" in missing in transaction st03 Bi workload

    Hi
    We're using BI.7 (SPS12) on MS SQL 2005 and are willing to have statistics about query runtime in transaction st03.
    I've followed the instruction givent in sap note : Note 934848 - Collective note: (FAQ) BI Administration Cockpit
    Statistics Process chains (0TCT) are now running every day without problem, infocubes (0TCT_Cd aggregates are filled.
    But in transaction st03 underBi Workload , analysis view, only "Aggretates", "Load Data" and "Process chain" data are available, the "Reporting" is missing ... quite disturbing when you want to have a look at the query runtime.
    I've rechecked many time the sap notes :
    I've activated direct access for virtual providers.
    I've called transaction RSDDSTAT, all the Infoproviders, workbook, etc ... have the setting On (X), All (2).
    I've checked the tables RSDDSTAT*, they're filled.
    I've checked the infocube 0TCT_C01 (Front-End and OLAP Statistics (Aggregated)) , the cube is filled with query statistics !!
    But despite all of that st03 stays empty for reporing.
    Any help would be highly appreciated.
    Thank you/
    Regards.

    Hi,
    we have similar problem like you. Please tell me how you have solved this problem.
    Thanks,
    Kiran Manyam

  • Firefox can't find the file at jar:file:///C:/Program Files/Mozilla Firefox/omni.ja!/chrome/browser/content/browser/report.html.

    Report is stored in eclipse project directory, when function sets window.location.href='report.html' getting above error. this is for a project very near deadline! any help would be great ,cheers

    btw , program been ran is a firefox add-on

  • Manual creacion "report" HTML

    Hola,
    alguien me podria indicar donde puedo encontrar algun manual de usuario para crear reports (informes) en HTML o ejemplos???
    Existe algun toolkit especifico para esto o es el propio report generation que viene con LabVIEW??
    Gracias.

    Hola,
    Existe un toolkit especifico para generar reports con excel word y office en general, te paso el link al producto y tutorial:
    http://sine.ni.com/nips/cds/view/p/lang/es/nid/5769
    Tutorial para Excel muy completo:
    http://zone.ni.com/devzone/cda/tut/p/id/3178
    Con el toolkit vienen más ejemplos.
    El report HTML se puede generar con Labview. Tienes ejemplos con labview. Busca en:
    C:\Documents and Settings\SPCabreJ\Escritorio\Jaime\afsdaf\examples\reports\withHTML.llb
    Por ejemplo el Example HTML Report.vi
    Saludos,
    Regards,
    Jaime Cabrera
    NI Applications Engineering Spain

  • Warning Message - Different HTML, missing script

    Hello
    At the time of playback, get a warning messages as:
    Different HTML,different Script
    Different HTML,missing Script
    in some of the pages.......
    I need to know why this warning message comes, is there option enable?

    Hello
    At the time of playback, get a warning messages as:
    Different HTML,different Script
    Different HTML,missing Script
    in some of the pages.......
    I need to know why this warning message comes, is there option enable?

Maybe you are looking for

  • How to delete the dat afrom the Ztable in GRP

    Hello Experts,                          How we can delete the data from the Ztable created by the developer , in the Production server ,please give a brief idea  about it , thanks in advance.

  • How can I display pictures with an odd size in Aperture 3.0

    My camera : Leica Digilux 3 (supported). I use to shoot in Raw format and the regular size for these pictures is 3148*2350 (7,4 MP = 14,34 Mo). I have no problem with them. Some times I take pictures in panoramic format, also Raw 3148*1762 (5,5MP = 1

  • Best practice Terminal Services Group Policy AD

    When I started out with Terminal Services on Windows 2000 I used as a guide a book from Todd Mathers called Windows NT/2000 Thin Client Solutions and have been using his recommendations ever since.  We are not planning to go to Windows 2008 and I tho

  • Account not eligible to buy gifts. Why?

    I have opened a new account and purchased music already today. However I did want to buy a gift certificate. I got a message saying that my account was not eligle to buy gifts!! Why?

  • Calendar in MobileMe is not syncing with iphone

    A couple of days ago my iphone stopped syncing its calendar with MobileMe. I followed the suggested steps to fix the problem (provided by Apple). I turned sync on and off, reinstalled the iphone software with and without the backup, turned phone on/o