Perfmon showing only average values

I have a dataset of perfmon data for "\System\Context switches/sec" from a number of servers, I want to show the MAX, not the average. However, the perfmon tool will only show the averages.
I created the dataset by running perfmon with a data collector set on each of 15 Win2008 servers. I copied all the .blg files to my Win8.1 machine, then used 'relog' to combine those .blg files, and filter for only the "\System\Context Switches /sec"
datapoint.
When plotting the resultant file, the Perfmon graphing program will only graph the averages, not the maximums, even after changing the "report and historgram data" radio button to 'maximum' under the "Properties/General" setup tab.
Suggestions?
Thanks,
Jason.

Hi,
Thanks for your post.
You could check the Properties to choose the report data.
Please refer to this MS article about Performance Monitoring
http://technet.microsoft.com/en-us/library/cc961845.aspx
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

LOV is showing only few values?

Hi Everyone,
I have one oaf page in which one lov is there which is showing only few values not all the values.
but when i execute the same query in toad its showing 125 values.
how can i make lov to display all the 125 values?
can i do this thriugh personalization or i need to customize? plz give me the steps....
Thanks.

Kumar ,
If Lov has 125 records , it will display only few records in first display set when you click on next button(link that appears right top on Lov pop up window )
it will show remaining set of records , ( 10 / 20 values in each in set ) .
If you are sure its not displaying entire set of rows , then probably their might be some restriction would have implemented in where clause to filter the records .
Copy the query associated to LOV region and run from the data base and see what's the number of rows you are getting . If there is any variation then
some ' where ' is causing the filtration , please look at the java source code of the page to track the issue .
Keerthi
Edited by: keerthioaf on Nov 15, 2012 4:39 AM

How to show only six values in dropdown box in design studio 1.3

Hi,
There was an requirement from our client to show only last six months in the drop down, when actually there is almost past 30 months are coming from the database. The data format also looks similar to "2014007", "2014006:..etc. Any idea to achieve this through loop.?
Thank You,
Palani

Hi Karol,
I like your idea, but i have difficulties to use it
i have a datasource DS_2 and i just want to show specific Members of my keyfigures.
When i fill my dropdown with this code it just gets empty and returns an error. Somehow i have to say if i want to show the Key or Text ?
i also need this infiormation to be able to compare my elements in the if clause ?!
Can you help me out ?
Best regards
Manfred
DS_2.getMembers("003N81FHQ23D64UTALOPW7MVN",0).forEach(function(element, index) {
DROPDOWN_2.addItem(index, element);
/* if ((element == value1) || (expression2 == value2)) {
   if_statements
} else {
   else_statements
EDIT ....
I've found the way how to access the keys and values ... i have to define an array and then i am able to access the internal keys and Text.
Just for others searching ....
var ArrayMem = DS_2.getMembers("003N81FHQ23D64UTALOPW7MVN",0);
DROPDOWN_2.addItem("#", "No Filter");
ArrayMem.forEach(function(element, index) {
if ((element.text == "Anzahl Sätze") || (element.text == "Gepäckgewicht")) {
   DROPDOWN_2.addItem(element.internalKey, element.internalKey + " - " + element.text);
This SCN article helped me out: http://scn.sap.com/community/businessobjects-design-studio/blog/2014/09/19/learn-about-arrays-in-design-studio-13
Best regards
Manfred

BPS Variable exits Ranges showing only Low Value

Hi,
I am attempting to show a comparison column in my planning layout which represents YTD values.
The data in my cube is as follows.
Cal Qtr      Fisc Period      Amount
2006.1       2006.003           10
2006.1       2006.001           20
Now in my variable selection for the layout, i define user exits for cal quarter and fisc period. I define the restriction for cal quarter as between 2006.1 and 2006.1
and the restriction for fiscal period as between 2006.001 and 2006.003. However the resulting output is only the data from 2006.001 (the 'low' value = 20). Does anyone know why this is so ? Is this a bug or an expected functionality?
Thanks for your help.
Shailesh
Message was edited by: Shailesh Unny

Hi,
In BPS, you can only select a single value.
If you enter multiple values in your variable, example like you did with 2006.001 to 2006.003, only the lowest value will be used for selection.
The result is thus the same as if you would have entered 2006.001 to 2006.001.
This can be bypassed in 2 ways (out of which none deserves the beauty price):
1) reload the data in your cube and post the result on a single date. You can then restrict your comparison column to this single date.
2) make the comparison column dynamic on your time variable.
You will then see 3 columns for each month, you can sum the 3 columns to display the total.
Please assign points if this was helpful or solved your problem.
Best Regards,
Filip

Selection screen shows only 500 values

Hi All,
When I execute a query having a selection option variable (0material) with "single values", I am only shown the first 500 values out of the entire list......how to get the remaining values in the selection screen?
Thanks,
gaurav

You will see an arrow besides 500 on ur screen
Click that
A window will pop up
Check a drop down on this window
It says
All
100
500
Select All

CJI5 commitment line item report not showing po gross value

Dear All,
system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
Example:
po net value: 1000
st 10%: 100
po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
what could be the reason for not showing po gross value in commitment line item report.
Thanks & Regards,
Sandeep

Hi,
As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
Regards,
Gokul

Prompt in webi not showing all the values

I have created a universe based on a BI query.in the BI query there is a variable for the profit center which has been used in the characteristic restrictions.When i create a webi report based on this universe,the prompt for the profit center is showing only 1 value.It is not showing the rest of the values.Pls help.

Hi,
1. Try to check at BI query level whether values are there for profit center column or not.
2. Try to do what susney said. If it doesn't work follow 3.
3. In universe level go to the profit center object on which you created prompt-> click on object properties -> properties -> edit list of lovs -> then a query panel appers to you -> run and check whether all the values appering to that object ot not.
4. If all the values appering then check whether any filters are applied to profit center object in universe level/report level.
Cheers,
Suresh Aluri.

F4 help-only posted values-Bex variable input

Hi
I have one hierarchy node variable on an infoobject.This infoobject is authorisation-relevent.The infoobjects hierarchy is activated in query designer.We have many hierarchies for this infoobject,one for every year.Recently,we chose new hierarchy for this infoobject as we moved into year 2011.
When I execute the query,in the variable input help F4 of the hierarchy node variable on this infoobject,I could see only some nodes(I couldnot see the required one).My user is unable to see anything.Please suggest how I can fix this problem.
I have two problem:
1.I want to see the present nodes it is showing together with some more nodes that came with new hierarchy
2.As of now,my business USER is unable to see anything in F4 help for this variable...I want him to see the nodes which I would like to see also.
How can I fix these problems?All suggestions are welcome.
My investigation:
I checked infoobject settings..'Query Execution Filter Val.Selectn' is set to 'Only Posted values for navigation'....Does that mean infoobject will show only those values in F4 help that the query can find data for,in infocube in current navigation state..??
And there are two other options which can be choosen at infoobject level for 'Query Execution Filter Val.Selectn':
1.'Only Values in Infoprovider'--It will show only those values in F4 help for which there are values in dimension tables of cube/ods(does it mean in other way ,that master data for which we have transaction data in cube/ods???)
2.Values in Master Data tables:all values from master data tables.
Let me know if have wrong idea.........................
Regards.

Hi,
at the infoobject level always you need to select "all master data values".
please check the version of the hierarchy what ever you are using till 2010 you might be using one version in 2011.
load the info-object with the new version at the infopackage level.
hope this helps
Thanks & Regards
krishna.y

Only posted values for Navigation does not work

Hi,
I have a problem where all master data is shown in the input help for a variable, even when the setting for the info object is to show only posted values.
In a WEB template I have tree reports using tree different data providers. The setting in the web template is to show the same variable only once and that works. The setting of the info objects is to show only posted values. That does not work!
When using the input help for a variable, all master data shows, not only the poster values in the data providers.
When unchecking the setting Display Same Variable Only Once (MELT_VARBLES) the variables appears tree times each and the input help works as expected. It shows only posted values.
Any experience of this?
Best Regards
Kent

Hi Kent,
If you build several queries on different infoproviders, then put them into one web template or workbook. Variables from different queries with the same technical name will get merged in variable screen (Set parameter MERGE_VARIABLES=True in web template property. Set "Display Duplicated Variables Only Once" in workbook settings for variables).
This means, that it is not possible to decide which infoprovider the variable is based on. The provider is unknown to the system when doing F4 help so that D mode is not possible since D mode [Only Values in InfoProvider] is also infoprovider dependent. So only M mode ['Values in Master Data Table'] is possible.
In such merge variable situation, the authorizated values in F4 help is also retrieved without specific infoprovider.
Regards,
Nishant

Filter by form shows only "Is Null" and "Is Not Null" value in split database

Hello,
I have a SPLIT database into FE (forms, queries...) and BE (tables with data) ready for distribution.
PROBLEM
When "Filter by Form" is chosen
only 2 values are available in combobox filter ("Is Null", "Is Not Null"). All other functionalities of the form work fine (data display), which means that tables are linked
correctly.
In the UNSPLIT database "Filter by Form" works OK (i.e. comboboxes show lists of possible values to choose from).
All the forms (and queries) behave like this.
Recordsource of all forms are queries.
Type of filtered fields => text (no memo fields, no comboboxes)
QUESTION:
What is the reason of this behavior and how can it be fixed so that "Filter by Form" works in SPLIT database (and displays available values in comboboxes)?
Thank you for help.

Hi,
this is the default behaviour with linked tables. To change it:
open the form in design view
select the text box you want to use for the filter
in the properties of the text box click at the data tab and change the FilterLookUp property from "Database default" to "Always"
See also
https://msdn.microsoft.com/en-us/library/office/ff194556(v=office.15).aspx.
cu
Karl
Access FAQ (de/it): http://www.donkarl.com
Access Lobby: http://www.AccessDevelopers.org

In service order Search page,In Service Order Search criteria, In Status value drop down i have to show only user status?

Hi Team,
My requirement is In service order Search page,In Service Order Search criteria, In Status value drop down i have to show only user status values only? how to do it..now in my status drop down values system status values also displayed ,i want only user status values only i have to show...how to do it?
Thanks
Kalpana

Hi Kalpana
As Standard there are 2 separate search fields for Status.
One for User Status
One for System Status
Are you sure that the other Status value you require are not for other Service Transactions different to the one you are wanting to search on?
If you need to make a only the User Status for a given selected Transaction Type, then you would need to make an enhancement to that Component
Regards
Arden

Currency F4 only shows info provider value instead of all values

Hi Guys,
I have a BI query in which the currency object is restricted with a variable.
I executed the query.
In the intial variable selection screen, i clicked on F4.
This variable only shows me the value from Info Provider.
But instead of that, i want to fetch all the currencies in the F4 help.
I have tried Query Filter Execution set to Master data but that too doesnt help.
Please please can someone help in it.
Regards,
Charu

Hi All,
Here are the steps i did for the currency conversion.
1. Created the conversion type.
2. Exchange rate type -> M
3. Selected Dynamic exchange rate
4. In the currency tab selected source currency from data records.
5. Target currency i selected Target currency from variable.
6. Variable is the one created on the 0CURRENCY object.
7. Time reference is the exact day and 0CALDAY is selected in it.
8. In the query, created a calculated key figure and assigned this conversion type to the CKF.
9. I have just dragged the 0CURRENCY in the row.
10. For currency in the Advanced tab in query i selected master data option for the filter.
When the query executes, it asks for the value of this variable.
When i select the F4, it should show me all the currency values, but it shows me only INR. In the search if i give EUR manually then it takes EUR but doesnt show me in the list.
Is there any step that i have missed out pls.
Regards,
Charu
Edited by: Charu Pandey on Jun 18, 2009 6:02 PM

Showing only those Keyfigures which has some values

Hello Experts,
We've the following layout:
Jan Feb Mar Feb
KF1
KF2
KF3
KF4
Need: On the start of the application, I only want to only those KF's, which has any value. and later if the user wants, they can add that back.
How can we achieve this functionality ?
Thanks & regards,
Jomy

Hi Tammy,
It was nothing specific to Planning.
I was just giving a use case.
The idea is to show only those Keyfigures which has some values but later I should have the ability to add it back to the view.
I would really appreciate your help in this.
Thanks & regards,
Jomy

Calculate Average value based on Day ??

Hello,
I am trying to calculate the Average value based on a day. The data is presented as follows...
Day          SOCount
Mon                34
Mon                 56
Mon                 67
Tues               24
Tues               25
Tues               23
Weds              45
Weds              69
The issue im having is that the Day column needs to be grouped first and the SOCount sumed together. Then the Average SO Count needs to be calculate based on this.
Thanks

Thanks for the reply,
The solution you have provided only gives me the average of the count of the SO Count, not the actual average of all the values added together then divided by the count..
The report i am creating only has charts in it. So i am trying to create a chart showing the
Average Sale Order Value by day.
I should have metioned this from the start, sorry.
Is it possible to do ?
Edited by: davitali on Nov 4, 2011 6:32 AM

Calculate the average value

the data I measured changed rapidly, so i want get the average value of the data
Do not tell me to use mean.vi , i have already know that.
and i got an idea which is add the data into an array every time, then sum of all the data value and take the result divide by the number of elements
but i dont know how to achieve that, anyone can build a simple vi to show me ? thank you
i have attached my vi which is using mean.vi to calc the average value, you can delete it and using in your way , thank you !
Solved!
Go to Solution.
Attachments:
EN-new.vi ‏274 KB

Hi I got a similar issue for averaging. I used the mean.vi from the math function but the average is rolling when i run it. I am trying to calculate the average for the data i read to the RT FIFO (which is around 40000 lines).I got the writing part working, however, when i am reading the data, I couldn't get it working. I thought i read the data as a 1-D array, and then pass it to the Mean.vi and then got the result. But seems like the mean is only showing the last data in the array.
Can someone help me with this??
Attachments:
FPGA-vi.png ‏242 KB
RT-vi.png ‏182 KB
RT-2mod.vi ‏515 KB

Perfmon showing only average values

Similar Messages

Maybe you are looking for