Perform Clean Install with OEM 10.6.4 disk

If the only install disk I have is the gray OEM one, is it possible to perform a clean install?

Thanks for the feedback. Good computing. BTW, since you're new to Macs, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Similar Messages

Clean install with 29$ single?

Can the 29$ box do a completely clean install with just the snow leopard disk? I currently have Leopard installed to the latest updates and XP on a BC partition.

Thanks, but I have no problem booting the DVD that came with the box. Only the upgrade DVD.
I called the Apple store and they told me to return the product. That might also explain why the upgrade process went so quick (17 minutes) but utterly painful afterwards with dozens of kernel panics).

MacBook Pro 10.6.8 still freezing after performing clean install of os.

Took to local Apple Store and they performed clean install of operating system. Worked for approximately 10 minutes and back to freezing again. Can still move cursor but everything else is unresponsive. Any suggestions would be helpful. Thanks.

Sounds like a hardware problem. Try replacing the RAM modules with new ones. Replace the HDD with a new one.

How do you perform clean install on mac?

I just purchased a MBP with Snow Leopard OS and I'm completely mac noob. I want to know how to perform clean install (erase and install) on a mac. Not that I want to do it now. Just want to learn the proper procedures earlier coz this is very beneficial in the future. thanks

FYI
I know that you know that there are two kind of installs for Leo: upgrade and erase and install. In principle, there would be little difference between the two. Many here say that upgrading, versus erasing and installing, is the superior procedure. Others feel differently. I say just do what you prefer. My bet is that percentage-wise those getting good installs from an erase and install, particularly if all apps are reinstalled, rather than migrated, is higher than for upgrade--but probably not appreciably higher.
The processes leading to the final outcome should lead to a good outcome in either case. But, things can go wrong either way. I am not going to try to elaborate much on the specific ways that things could go wrong either way. But, for the most part, they would have to do with the way migration works and the migration technique used (if used), in the case of erase and install, and the existence of problems in the system existing prior to installation in the case of an upgrade.

I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.

I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.

Follow the instructions at the link I posted
have a lot of old stuff transferred from Mac to Mac to Mac that is slowing down everything
If that included Power PC apps, read here > Lion upgrade questions and answers: Apple Support Communities

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX.

How to do a clean install with lion after it is already installed?

how to do a clean install with lion after it is already installed?

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

How to install a clean install with leopard upgrade DVD!

Does somebody know how to do an clean install with a Leopard upgrade DVD?
I bought my MacBook for 1 week ago, and them said that i would get leopard sent later. And when i get it, its a upgrade cd that i cant install only leopard on my ny frsh hard-drive. *** apple?

First, there is no such thing as a "clean install" option in OS X. But the "cleanest" install is to start with a reformatted drive (using Disk Utility's "Partition" tab), followed by an install of the OS that will be cleansed of any traces of OS or file system corruption. (The "unclean" options, "Upgrade" & "Archive & Install" won't be possible, & the erase part of "Erase & Install" is at this point redundant.)
However, if you use Setup Assistant (which runs after rebooting) or Migration Assistant to bring over copies of old system components, applications, & settings, you may be reintroducing something "unclean" from the old versions.
This said, if your up-to-date disk is just an updater (nobody seems to know yet), you can do a "cleanest possible" install by following the above with your original Tiger Installer disk, letting it reboot & not importing anything during setup, & then following the instructions supplied with the up-to-date disk to upgrade. At this point, you may want to clone the startup disk for future reference, before adding back in your apps & user files by whatever method(s) you chose.

Clean Install with Lion on SSD

Hi,
Was wondering if anyone could provide me a step-by-step guide for a clean install with Lion on to a new SSD.
I have already self-made a Mac OS Lion Installation CD - will this self-made CD be the only CD I need for the clean install (or do I need to use the original CDs that came with my MBP purchase) The CDs that came with my MBP was the Mac OS 10.6.8 Snow Leopard (early 2011 model)
If the self-made Lion CD is the only CD I need - then my next question is how can I validate the OS version - I suppose there will be a content ID or some sort of key to ensure that the OS is a true copy? If a key is needed, how do I obtain that?
I was told that one can self-made a Lion Installation CD from a MBP with Lion OS on it and use the CD on all other MBP for upgrades to Lion - but again, there must be a license key to subsequent users, otherwise Apple would be losing money!
Thanks in advance for your response.
Chih

Hey Sam,
Thanks for your response.
Your response prompt me for another question - let's say I have multiple MBP, if I were to upgrade each MBP's hard drive to a SSD.
Will I be able to log in to my App Store a/c and use the purchased Lion OS (I only had one license) to upgrade all my MBP?
Thanks again.
Chih

Windows 8.1 clean install with Windows 8 OEM key

Hello! I have a HP Probook 450 with Windows 8 preinstalled. I want to upgrade to Win 8.1, but I want to perform a clean install. Which means: inserting the Win 8.1 DVD (I've downloaded the .iso from the internet.), formatting the disk, and at last, Windows 8.1 installation.
Will this work? I've read that my Win 8 OEM key, which is hardcoded in the BIOS, will not allow me to install Win 8.1. The HP forum users say here and here that it is possible to perform Win 8 clean install. How is with Win 8.1?
This question was solved.
View Solution.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
HP ProBook 450 G0 Notebook PC Support:
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/home/?cc=us&lang=en&sp4ts.oid=5359405&task=&ac...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Clean Install With Custom User Id

Hello
From experience I am aware of problems in our network when we have 2 users with accounts which have the same User Id. For this reason I have always tried to ensure each User on our network has a unique User Id.
I am upgrading several User's iMacs to Mountain Lion and I will format their drives and perform a clean install. Is it possible, using Terminal, to perform a clean install but specify a custom User Id?
Many thanks.
Chris

It would probably be easier to change your Apple ID password. This would allow you to continue downloading past iTunes/App Store purchases.
Apple ID - Manage
Do you have a backup? If not, backup before doing anything because an erase and reinstall will cause you to lose all your data.
If your MacBook came with Mountain Lion pre-installed, you would have to purchase a copy from the App Store, but you can probably avoid that.
Boot to the Recovery Volume (command - R on a restart) or hold down the option key during a restart and select Recovery Volume. Run Disk Utility Verify/Repair and Repair Permissions. Then select the Erase tab. Format is Mac OS Extended (Journaled). Erase and then reinstall the OS.
OS X Recovery
When you reboot, use Setup Assistant to restore your data.

Windows XP 64 bit pro clean install with RAID

Can anyone help out???
I recently purchased a Lenovo Thinkpad W700 with the raid system (raid1) it had Vista Business pre installed but I wasn't impressed so I've cleared VB out and tried to install XP 64 pro I have followed the guide I found on this site http://forum.notebookreview.com/showthread.php?t=188992
which was very informative but didnt seem to include any details on a raid installation. If I change my BIOS Serial ata (sata) to compatibility I can install win xp and get it running but no raid!! if I try to install the Intel chipset driver it reports it cannot install!! If I set the Bios Serial ATA to RAID the setup goes so far through then I get the BSOD
I seems to me I need some raid drivers but have no way of installing them during setup (I dont have the drivers anyway!!)
Sooooo...........can anyone out there point me in the right direction for a clean xp pro install with raid?? theres a couple of beers in it!!
Lenovo thinkpad W700, Q9000 2.00GHz Quad Core 2x 160gb hdd raid1, 4gb ram, 1gb nvidia graphics FX3700m Fingerprint reader, Graphics tablet (digitiser?)
Windows 7 Professional 64bit RAID 1

I believe you need to install the Intel Matrix Storage Manager Driver for Windows XP, Vista (32bit) - ThinkPad. Installation instructions are on the same site. If you don't have a floppy you can streamline them onto an install disk.
Other drivers can be found here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How to change startup disk for a 2012 Mac mini with dual HDD and clean installed with Windows 8.1?

Hi,
I have a Mac-mini (late 2012 model), originally with Mac OS X Maverick Server installed (with two HDD). Recently, I had clean installed Windows 8.1 on one of the HDD (worked perfectly, just slow) and swapped the other HDD (with Mac OSX) with a SSD. I then cloned the Windows OS HDD in to the new SSD. Now I am trying to boot this Mac mini from this SSD, however, since this Mac mini do not have BIOS for me to change the boot sequence at the startup, is there any one can help?
Thank you,
Liusc

If you boot with the Option key depressed what boot options are shown?
Also:
Restart your computer
After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer
How to install Windows using Boot Camp - Apple Support

Macbook Pro with SSD (optibay) and HDD. Want to clean install with discs and move hard drives.

Hi all,
I have bought a used Macbook Pro 15' i5 Mid 2010 in brilliant condition. It came with original HDD in main Hard drive space and and SSD in an optibay. This all works fine and came with Mavericks already installed.
I want to start using the laptop like from new as there is nothing on there i currently need atm and dont want problems in the future with my apple id not being the original installer of mavericks. (had a similar problem previously on a used macbook white that had lion on)
What i want to do is erase and move the SSD to the main hard drive bay (have read this is preferred) and a clean install using install discs that came with it onto the SSD. Then install the HDD into the optibay or external enclosure and reinstall optical drive, not sure on that one yet.
My main questions are about the process i should use. There is nothing i need to back up or anything as this is effectively a new machine to me. Shall i simply erase the SSD (currently contains the OS) and install it in main hard drive bay and run install discs to install original OS (10.6.3)? Is it that simple? Any tips on erasing SSD would be useful also?
Also as the machine currently boots from the SSD that is in the optibay, is there anything that tells the machine to boot from that hard drive as apposed to the main HDD bay or does it just know? If there is, when i install the SSD into main hard drive bay how do i tell the machine i have done so and to boot from there?
The other thing i may do is buy a new SSD and do a new install on that and leave the current SSD in the optibay and use that for storage. Undecided on that yet.
Any help will be much appreciated. Thanks.
Sam

To do what you want, and the only way to do what you want legally and physically, you will need a set of Original System Reinstall DVD Discs. Without them you can't do what you want as the install of Mavericks that is now on it is TIED to the previous owners Apple ID and can not be transferred and or Reinstalled without knowing that persons Apple ID. And even iof you knew it it would still be TIED to that Apple ID and not yours.
So did the previous owner supply the Original System Reinstall DVD disc Set? If not you will need to order them from Apple.

Clean install with no OS X install disc

Due to glitches, teenager messing with settings, me messing with settings, internet connection probs, etc I think I need to do a clean install of my OS (10.6.8) but do not have the original OS install disc. How do I get a copy of that?

LowLuster wrote:
Hi Niel
What is that number that shows up at the bottom of all your posts? Is it the total number of posts you have made?
If it is how do you include that in your posts?
Thanks.
Niel wrote:
Phone AppleCare and order replacement original disks.
(83356)
Yes the number is the total number of posts he has made and it is added automatically, you don't have to do anything to make it happen.

Perform Clean Install with OEM 10.6.4 disk

Similar Messages

Maybe you are looking for