Perform Client import/export SCC8 with different release component between server

Dear All
Isn't possible to perform Client import/export SCC8 with different release component between server.?
Currently the condition of between two system as follows
Source Server : SAP ECC6.0, Component SAP_APPL, release 602 level 16
Target Server : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
Thank You, your help is much appreciated.

No..

Similar Messages

Setup Central Contract Management SRM 7.01 with differing release versions

Hello experts,
OSS note 1268821 explains how to configure the central contract management between a SRM 7.0 and an ERP 6.04. So far so good, but how should it be handled if there are differing release versions such as ERP 6.04 and ERP 6.03? I guess that a technical split (xml services/ ALE distribution) is necessary?
Assuming that there are some backends with differing release versions and in some cases with differing master data (not supported by central master data client) would you always go via PI? Independent of release version, technology and master data.
Could you give some further detailed informations how to configure such a scenario? What has to be done to transfer existing contracts from an ERP 6.04 into SRM CM component (migration concept)?
Thanks!!!
KR Thorsten

Hi Thorsten
The minimal ECC version is 6.0 EHP4, Central Contracts require certain business functions in ECC to be activated and as these are included within ECC EHP4 you won't have these available in lower version. Therefore you won't be able to operate central contracts in such an ECC system.
You would either have to go with patching these systems or go with GOA's for these systems.
Operating central contracts via PI or SOA i believe provide almost similar functionality. SOA however requires an SRM EHP1 system and ECC EHP5 back-end to operate whilst central contracts configured via PI can be operated onwards from an SRM 7.0 and EHP4 system.
I can't help you on your migration issue, maybe someone else can.
Kind regards,
Tim

How to export data with column headers in sql server 2008 with bcp command?

Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM   [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.

Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD.

Is it possible to share an aperture library with different users using osx server.

is it possible to share an aperture library with different users using osx server.

Not really. You should not be sharing an Aperture library over a network. It's not designed for that and you'll likely corrupt your library at some point.

Import/export volume to different administrative server

Hi everyone,
i'm testing the OSB software for DR environments. Now i want to export volume since main administrative server and import volume to different admin server. When I run export command, it shows me "Error: can't execute command - ran out of import/export elements"
ob> lsvol -L pLib1 --long
Inventory of library pLib1:
in 1: volume MONTH_ORAFS-000001, barcode 000011L4, oid 102, 706599936 kb remaining, expires 2011/03/18.10:19, mediainfo hw encryptable
in 2: vacant
in 3: volume DAY_FS-000001, barcode 000013L4, oid 111, 774944768 kb remaining, expires 2012/03/09.13:28, mediainfo hw encryptable
in 4: vacant
in 5: vacant
in 6: vacant
in 7: vacant
in 8: vacant
in dte: vacant
ob> exportvol -L pLib1 -v DAY_FS-000001
Error: can't execute command - ran out of import/export elements
can you help me, please?
Thanks!!

Rich,
the import tape catalog with the identifyvol --import command was fine. Now, when i run a restore oracle database_test with the imported catalog show error media manager.
ob> lssection -v WEEK_ORA-000001
322 WEEK_ORA-000001 196 1 0 database_test.bos.local 02/28.17:02
323 WEEK_ORA-000001 197 1 0 database_test.bos.local 02/28.17:09
324 WEEK_ORA-000001 198 1 0 database_test.bos.local 02/28.17:16
325 WEEK_ORA-000001 199 1 0 database_test.bos.local 02/28.17:17
326 WEEK_ORA-000001 200 1 0 database_test.bos.local 02/28.17:18
my RMAN catalog show the backup
BS Key Type LV Size Device Type Elapsed Time Completion Time
9898 Incr 0 128.00K SBT_TAPE 00:06:43 2011-02-28 17:17:11
BP Key: 9907 Status: AVAILABLE Compressed: YES Tag: TAG20110228T170322
Handle: *0am5qik4_1_1* Media: WEEK_ORA-000001
SPFILE Included: Modification time: 2011-02-23 13:24:54
SPFILE db_unique_name: database_test
Control File Included: Ckp SCN: 989240 Ckp time: 2011-02-28 17:10:28
RMAN> restore spfile to '/home/oracle/';
Starting restore at 2011-03-01 18:21:01
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=96 device type=SBT_TAPE
channel ORA_SBT_TAPE_1: Oracle Secure Backup
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=127 device type=DISK
channel ORA_SBT_TAPE_1: starting datafile backup set restore
channel ORA_SBT_TAPE_1: restoring SPFILE
output file name=/home/oracle/
channel ORA_SBT_TAPE_1: reading from backup piece 0am5qik4_1_1
channel ORA_SBT_TAPE_1: ORA-19870: error while restoring backup piece 0am5qik4_1_1
ORA-19507: failed to retrieve sequential file, handle="*0am5qik4_1_1*", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
sbtrestore: piece '0am5qik4_1_1' does not exist in the backup catalog.
thanks so much!

Improving Oracle9i DB performance using IMPORT/EXPORT

Hi,
I'm experiencing wrong performance on Oracle9.2.0.6 DB for production system.
I have one schema and two tablespaces: the first one for data (18 datafiles sized each 1GB), and the second one for indexes (15 datafiles sized each 1GB).
I tryed to tune the db using statpack and noticed "Waits due to Row being locked by an active Transaction".i couldn't do very much for solving this issue.
So, I'm wandering if using import/export utility against database would be a solution to obtain better performance. I can follow two methods for I/E:
FIRST METHOD:
1. Take a good export (with COMPRESS=n).
2. drop the tablesapces.
3. recreate the same tablespaces (data and index).
4. make data as default and revoke RESOURCE role from user.
5. grant quota unlimited on DATA TABLESPACE and INDEX tablespace to the user.
6. Just import (single import would do). imp user/pass fromuser=x touser=y indexes=y constraints=y.
Now since both data/index tablespaces already exist, the indexes will be created in their intended tablespaces.
SECOND METHOD
Instead of Imp or exp I can use move tablespace cmd to avoid fragmenation.
1.create new tbs.
2.move all objects to new tbs.
- rebuild all indexes to new tbs.
3.drop old tbs.
4.rename new tbs name to old tbs names.
Please, could you suggest If I'm following the right way to achieve better performance?
Thanks in advance.
Claudia

"Waits due to Row being locked by an active Transaction" is an indicator that you have a blocking problem, not fragmentation. Do you have long transactions? In Oracle, only writers block writers so it appears you have multiple sessions trying to modify the same row(s).
And, on the import/export - What type of disk is attached to the system? If it is a SAN it is likely that you already have a decent degree of data distribution between data and indexes.

XI 2.0: HowTo connect Bus.-Systems with different Releases to XI (RFC-Ad.)

Hi,
can anybody help me solving this problem:
I have Business-Systems connected to XI by RFC-Adapter. Everything works fine. Now I want to upgrade some of these Business-Systems to a newer Release --> RFCs are changing! (For both Releases I have separate Developing-Systems)
Does the following work?
- Creating a new Product-Version
- Creating new Software-Component-Versions for the new Product-Version
- Creating Namespaces with the same names (as in the older Software-Component-Versions)
- Tools/Release-Takeover for every Software-Component
- Connecting Develop-System of the new Release to the new Software-Components (Interface-Import of RFCs)--> in the new Software-Components only new RFCs can be uploaded.
- Business-Systems with old Release keep connected with old Product-Version. Business-Systems with new Release are connected with new Product-Version.
Does it work? Is this the best approach or are there other possibilities?
Thanks in advance,
Max.

Hey
are u suppose to do an IDOC(R/3 system A)-Xi-IDOC(R/3 system B) scenario,of u have to collect IDOC's from both the R/3 systems and send it to a single file?
in any case u have to maintain separate Business system and logical system name for both R/3 systems
thanx
ahmad
Message was edited by:
Ahmad

How can I import CD's with differing custom settings? IWhen I want to change settings the AAC encoder window does not appear because Itunes has adopted the first custom settings as default.

I imported a CD with custom settings for stereo bit rate, sample rate and channels. When I tried to import a second CD with different settings I could not get to the AAc encoder window that gave the settings options. The custom settings I had chosen for the first CD had become the default "custom" settings.

Hi there,
please take a look at my suggestion under message #19227279
regards,
Markus

Lightroom 5 Darkens Photos after Importing Images Used with Different Camera [NOT SHOOTING IN RAW NOR B

I seriously need help, my whole entire catalog of photos just got darkened for some reason after importing photos used with a different camera. What happened is that I imported photos taken with a different camera (Canon EOS 60D) and when I did that, it darkened all the rest of my photos (taken with Canon EOS Rebel T3). Why did this happen? This is making my photos insanely hard to edit.

If you always want Camera Neutral picture style to be applied, then open one of your images that you have imported and have changed nothing else in Lightroom. Set the camera profile to Camera Neutral and save new camera default settings. Then whenever you import that setting will be applied to all of your images.
If you don't always want that style, you could save a preset that applies the Camera Neutral picture style, and then you could choose to use that preset during the import process.
It is simply a matter of determining your workflow and then setting things the way you want them to work.

Import/export related with performance issues

Hello,
my database has a poor performance. If I export the schema containing data+ recreate it + import data, will I have any benefit? At least, regarding space issues I hope so.
Any suggestions?
Regards,

will I have any benefit?
I don't think so.
You first have to discover the root problem.
Pehaps a simple dbms_stats.xy call may help, or your instance is baldy configured or the sqls are written dickery or ...
What does "poor performance" mean exactly?
Dim

Import/export schema with ODI

Hi all,
do you know if with ODI11g I can import a full schema from Oracle database to another Oracle database?
Thanks
Erika

why don't use imp/exp command to export schema from source db and import into target db.
1) export11g ODI repository schemas in DMP files
example : my 11g schemas are "ODI_MASTER" and "ODI_WORK"
exp userid=odi_master/*odi_master* file=c:\odi_master.dmp
exp userid=odi_work/*odi_work* file c:\odi_work.dmp
2) import the dump file into new schemas in the new database (or is it the same database ? in my case, it was a different one)
imp userid=SYSTEM/password touser=odi_master fromuser=odi_master file=c:\odi_master.dmp
imp userid= SYSTEM/password touser=odi_work fromuser=odi_work file=c:\odi_work.dmp
--nayan

Need to export file with different layers selected automatically

I have a file with a background and various text layers.
I want to select each text layer individually and export them to a file, but I don't want to do this manually because it would take a lot of work.
My question is, how would i tell photoshop to export X numbers of files. Where X=number of text boxes.

I still don’t quite follow: Should the resulting files combine one of the text-layers with the lowermost layer or display only one of the layers?
Because I thought Export Layers to Files would do the second.
Anyway, the following might help, You would have to enter Your intended gif-settings in the Script manually though (see »Photoshop CS4 JavaScript Ref.pdf« or ExtendSctipt Toolkit’s Help > Object Model Viewer for the correct nomenclature for the various options).
And You should adjust the naming-procedure to Your liking, I didn’t use the actual layer-names to avoid possibly overly long names.
Paste the following text into a new file in ExtendScript Toolkit (part of Photoshop’s installation) and save it as a jsx-file into Photoshop’s Presets/Scripts-folder.
After restarting Photoshop theScript should be available under File > Scripts and can be assigned a Keyboard Shortcut directly, recorded into an Action or (in CS4) be used in a Configurator-Panel.
// saves gif-copies of the backgoud-layer with one of the other layers visible in the same location as the original file;
// existing files of the same names will be replaced without callback;
// use it at your own risk;
#target photoshop
if (app.documents.length > 0) {
var myDocument = app.activeDocument;
// get the name;
var docName = myDocument.name;
var basename = docName.match(/(.*)\.[^\.]+$/)[1];
//get the location;
var docPath = myDocument.path;
// get all non-layerset-layers;
var theLayers = collectLayers (myDocument);
// gif options;
var gifOpts = new GIFSaveOptions();
gifOpts.colors = 256;
gifOpts.dither = Dither.DIFFUSION;
gifOpts.ditherAmount = 75;
gifOpts.forced = ForcedColors.NONE;
gifOpts.interlaced = false;
gifOpts.matte = MatteType.WHITE;
gifOpts.palette = Palette.LOCALSELECTIVE;
gifOpts.preserveExactColors = true;
gifOpts.transparency = true
// hide all but the background layer;
for (var m = theLayers.length - 1; m > 0; m--) {
theLayers[m].visible = false
// save the copies with one additional layer visible each;
for (var n = theLayers.length - 1; n > 0; n--) {
theLayers[n].visible = true;
var layerName = theLayers[n].name;
// duplicate image before saving to avoid flattening-dialog;
var thecopy = myDocument.duplicate (thecopy, true);
thecopy.saveAs((new File(docPath+"/"+basename+"_"+n+".gif")),gifOpts,true);
thecopy.close(SaveOptions.DONOTSAVECHANGES);
theLayers[n].visible = false
////// function collect all artlayers //////
function collectLayers (theParent) {
if (!allLayers) {
var allLayers = new Array}
else {};
for (var m = theParent.layers.length - 1; m >= 0;m--) {
var theLayer = theParent.layers[m];
// apply the funtion to layersets;
if (theLayer.typename == "ArtLayer") {
allLayers = allLayers.concat(theLayer)
else {
allLayers = allLayers.concat(collectLayers(theLayer))
return allLayers

RFC export variable with different output length.

I have an RFC returning language from R/3 with Datatype SY-LANGU. When I run RFC from R/3, I see language being returned in two chars. But I get only one char when I run the same from Web Dynpro.
When I look at Web Dynpro model dictionary, It is imported with fixed length '1" and external length as "2".
From ABAP Dictionary it is of one char, But output length is two chars with some conversion routine.
Is it possible to get language output in web Dynpro with two chars with out changing the signature of the RFC?

Hi,
I think you can achive this.
You can involve value attribute context for this tranformation.
Ashutosh

SSIS 2012 - Importing multiple files with different columns (where columns are stored in a table)

Hi everyone,
I have been tasked to upgrade an existing DTS package into an SSIS package.
The old package uses 3 tables.
Table 1) Has a list of file names
Table 2) Has a list of columns per file
Table 3) Is the data destination.
So what is supposed to happen is:
Step 1) the package should load the files into a resultset
Step 2) for each file in the resultset, the package should get the related columns
Step 3) the package should now map the columns to the destination table (variable column numbers here)
Step 4) the import should take place.
I have gotten to step 2 but am not sure how to dynamically map the columns to the destination table.
Any pointers anyone?
Thanks in advance!

Hi Tonyhektic,
What’s the nature of Table 2, does it only store the column names for each file? I don’t know how it is implemented in DTS package, however, in SSIS package, dynamic columns mapping is not supported. To work around this issue, we need to use Script component
to do the columns mapping. You can refer to Sorna’s script above or have a look at the following blogs:
http://munishbansal.wordpress.com/2009/06/09/dynamic-columns-mapping-%E2%80%93-script-component-as-destination-ssis/
http://blog.quasarinc.com/ssis/best-solution-to-load-dynamically-change-csv-file-in-ssis-etl-package/
Regards,
Mike Yin
TechNet Community Support

Macro to import/export data with MS Access

The company I work for has a series of MS Word documents that can use a macro button (button in MS Word) to communicate with MS Access. The Word document receives a tracking number and gives MSAccess two fields of information such as name, and date. The word document then saves that tracking number, and Access saves the name and date information.
Is this macro a possibility with Adobe LifeCycle documents? I have replaced the word documents with LifeCycle designed pdfs. The pdfs are amazing but the macro is the last piece to bridge the gap. Any comments or suggestions? From some light Adobe reading it appears possible.Thanks as always for your help.
I have found the MS Word file macro. Is this convertible to javascript?

take a glance at what these guys do: http://www.openbusinessengine.org/docs/guide.html

Perform Client import/export SCC8 with different release component between server

Similar Messages

Maybe you are looking for