Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

Hello all,
Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
(ME61/ME62/ME63)
Detailed replies with various possibilities would be highly appreciated.
Thanks & Regards,
Joy Ghosh

The vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
There you define a job that runs RM06LBAT report.
You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create.

Similar Messages

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

Setting Equalizer for more than one song at a time

Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
Thanks,
Joe The Author

highlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.

Master_detail for more than one record at a time

Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.Bcj

Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj

Creating SQL-Loader script for more than one table at a time

Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant Rane

No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need.

Is there a way to lock transparent pixels for more than one layer at a time?

I've tried selecting multiple layers to modify but the lock transparent pixels box becomes greyed out once I've selected more than one layer. Apologies in advance if this is deemed to be a stupid question but it would be greatly appreciated if someone knows of a solution. It would be very handy for some of the projects I'm currently developing.
Thanks.

I have not had a problem in Photoshop CC 2014 as long as I selected a layer with transparency, in my case the gray checkerboard. The button would dim if I selected an adjustment layer.

Ipod nano not playing audiobooks for more than one minute at a time

Does anyone know how to fix this problem? I stopped using it after I couldn't play an audiobook for more than a minute before it stopped. A friend thought she had fixed it, but I downloaded another audiobook to the ipod nano and it did the same thing...played for a minute and then turned off. I want to take it with me on a 8K walk, but it is discouraging.

No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need.

There is a way to use the button enhance for more than one photo at a time?

I have more than a thousand photos to edit, this can help a lot.

This might help:
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD

Can Time Machine perform encrypted backups for more than one computer to the same external drive?

I have two MBPs. The older MBP, with 1TB of storage, now contains two other MBP clones, for a total of 3 user machines on 1 MBP). I'd like to back up both my newest MBP, and the older MBP with the 2 clones, to my new 5TB drive (via wi-fi). I want to encrypt these backups, but am unclear whether it is possible. Does TM first encrypt the drive itself, or is each back up separately encrypted? I understand that if I wanted to encrypt an existing Time Matters backup on a drive, the prior data would be erased and reformatted, but here I am working with a new backup drive, on which one encrypted backup has been performed.
I just don't want to overwrite this existing backup (which was for my newest MBP).
Thanks for whatever help anyone can provide.

You should have prepared the drive better..
The drive should have been partitioned. It is possible to load the backups.. but you can get into trouble.
See http://pondini.org/TM/4.html
Since partitioning at this point would destroy the existing backup.. the best way is to setup a disk image for each of the other Macbook backups and then mount the disk image and use that for the TM backup..
Encrypting the drive or the backup.. that is something I avoid.. backups to me are useless if I forget or lose the key.. apple have warned lose the key.. the backup is useless..
But check pondini FAQ .. you might be able to encrypt a drive image.. or the backup.
http://pondini.org/TM/FAQ.html
See Q25 and 31.

Automatic goods receipt for more than one phase

Hi all,
I want to make automatic goods receipt in the confirmation COR6N for more than one phase , i know that it is not possibe in the standard system but is ther any fuction module or note can support this issue?
Regards
Ahmed Sobhi

Dear Ahmed Sobhi,
If my understanding is correct,then it's not possible to perform Automatic GR for more than one operation or phase in standard
SAP.
Regards
Mangalraj.S

Editing 'Media Kind' for more than one song.

Team,
After downloading the newest update, I am no longer permitted to edit the "Media Kind" for more than one item at a time. I need to be able to select an entire album at a time in order to efficiently update my library. I sincerely appreciate your help.

I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
Thanks for any help on this.

Reversing Landed Cost document with more than one vendor

Hi Experts,
Reversing Landed Cost document with more than one vendor:
My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
Created Landed cost by selecting 2 vendors in the Vendor field.
After you picked one vendor, you go to the vendor code/name again then choose another vendor you
need, once you picked, the system will ask you whether you want to delete the previous data, then
you say no, after then you will see the vendor name became "different vendors" and code be "********"
(on the vendor tab: you will see two vendors)
To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
the vendors for Good Receipts & Landed Cost.
Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
can with one vendor to reverse the transaction.
Can this functionality be added to future versions?

Take a look at business area and groupings in they payment program settings...
I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
Grouping Open Items and Individual Payments
Wherever possible, the payment program will always group items together for payment.
The payment program can only group together open items for payment if the open items in an account have the same:
1. Currency
2. Payment method in the item
3. Bank in the item
4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
You can also pay open items from different company codes together, as well as customer and vendor line items.
Items in an account are not grouped together if you:
1. Make payments separately per business area. This procedure entails separate payments being created per business area.
2. Want to make individual payments
Items in which a payment method is specified are not grouped with items in which no payment method is specified.
You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

F-53 - Payment to more than one vendor

In F-53 how to pay to more than one vendor. That is I am making a payment of 20,000 but paying two vendors 10,000 each.

HAI,
It is possible to pay morethan one vendor, using f-53, process should go like this
-In f-53, first fill all the fields along with the total amount you want to pay and one vendor detail
-here, important before selecting 'process open item' , select the 'other accounts' above the standard OIs, chek box
-you will get seperate popup window..there you fill the details of other vendor
-while selecting for clearing the open items, you will get all the open items of both the vendor
- select the required open item and clear the same
chek it once , if any problem i can go further
ramana.v.v

Payment to more than one vendors

Hi Experts,
We have a scenario, in our company, where we need to pay more than one vendors using one cheque. Please guide me how can i process this in system.
Regards

Hai,
You can try this option, go to transaction F-53. fill until bank details, select simulate you will get line item otion then you can select more than one vendor.
You can try the easiet way is go to F-02 complete the transaction.
Regards
Rajaneesh

If-function for more than one cell

Hello friends,
I am looking for an if-function that asks for more than one cell. EG:
=If(A2=True;50;0) were A2 is a marker field. In my table A3, A4 and A5 are markerfields as well. How do I add those cells to my my function. Saying: Is any of A2-A5 true, than say 50 else say 0.
As a second question:
Is there a function that says: If A2 is true give me 50, if A3 is true gimme 40 ... all in one function!?
Thanks a lot for helping me !!
Jimmy

The answer to both is yes you can perform these using functions that exist in Numbers:
1) You can use check boxes for the marker cells then use cells in the next column to translate from check boxes to a numeric value:
e.g. B2 = if(A2=TRUE, 1, 0)
then sum the cells in B2 - B5 and compare to 0. if the sum is greater than zero then one of the check boxes is checked:
2) The question with this request is what if more than one marker is set (again I am assuming you are using check boxes)
I am assuming the A2 take precedence (that is if the checkbox for A2 is checked that the result will be 50 EVEN if A3 is checked)
A1 = IF(A2=TRUE, 50, IF(A3=TRUE, 40, 0))

Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

Similar Messages

Maybe you are looking for