Performa need a monitor!
I have a Performa 6400 AV that has taken a lick'n and keeps on tick'n. I want to get a flat screen monitor for this faithful little guy. Is that possible? Any suggestions on what monitor will work and where I can find it. I've search the web but can't find the right thing or site. Thanks for any help.
The 6400 puts out a VGA-compatible signal, but uses a Mac connector. You need an adapter to convert from the 15-pin (two row) Mac connector to the 15-pin (three row) VGA connector. This adapter must also produce a code that is read by the Mac at Startup. If it does not provide a code, you get no picture.
Then shop for a flat screen display with a VGA connector. It should be able to support the older 4:3 aspect ratio. If it can only do 16:9 aspect ration (today's popular HDTV shape) the 6400 will not be able to make a picture that can be displayed on it.
Resolution Video Memory --1MB DRAM (built in)
640 x 480 16-bit
800 x 600 16-bit
832 x 624 8-bit
1024 x 768 8-bit
1152 x 870 n/a-bit
1280 x 1024 n/a-bit
You could add a PCI-slot display card, and that may give you additional options.
Similar Messages
-
Suggestions welcome...what all reports needed to monitor DB performance
Hi All,
Could you all please let me know what reports would you need to monitor a database. I am writing something that one could use to monitor database. not like statspack which would take snaps at regular intervals but a GUI where in you would click on a particular button a get the report at that instance. some reports like indexes that need rebuild. queries taking lot of time...users, their roles,undo stats, cache hits..
So do let me know what all reports u can think of and i will try and put them together.. doing it for my dissertation work.. so please please help with your valuable inputs..
regards,
KailasA good stuff is a program that shows when a event in v$system_event is out of range of normal condition operation(so you have to use some statistics functions, and store a continuos baseline), and what session is doing this injury.
Regards
Hélio Dias
http://heliodias.com -
Need to monitor application folders in scom 2012
Hi;
I need to monitor the the size of msmq folder on various windows servers.
Here the requirement is to monitor the size of respective folders. Most of the files are located at
C:\Windows\System32\msmq--
Could someone will help me for configuring these foldes under scom 2012 management servers.
Thanks..
Regards, Rajeev ParambilHi,
We may use script to check file sizes and use the script to create a monitor.
In addition, hope the below article can be helpful:
Monitoring File Size with Custom WMI Performance Counter
http://blogs.msdn.com/b/steverac/archive/2009/08/30/monitoring-file-size-with-custom-wmi-performance-counter.aspx
Regards,
Yan Li
Regards, Yan Li -
Video Card Addition (need 3 monitors)
I am currently using a 2 X 2.8GHz Quad-Core Mac Pro with the NVIDIA GeForce 8800 GT card and I am needing 3 monitors on this machine. (2 monitors is cutting it) What is the best upgrade to do this? Am I better off purchasing another 8800 card or would something like the ATI Radeon HD 2600 Pro card do the job?
Windows may have problems if you have both ATA and NVIDIA boards.
-
Performance analysis and monitoring of a Forteapplication
Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99 -
PowerMac 8600 Needs New Monitor
I have an 8600 that needs a monitor. Exactly what type of adapter do I need to hookup a monitor (crt) to it?
ThanksThe signals involved:
Red intensity and its ground
Green intensity and its ground
Blue intensity and its ground
Horizontal Sync -- indicates start and end of one row of dots across the screen
Vertical Sync -- Indicates start and end of one screenful of rows of dots
... can only be transposed from the typical
"VGA-style" three-row 15 pin Male (with pins) connector on the cable-end to the
Apple "two-row" 15 pin Female (with holes) connector on the Mac Display Card
... in one way that will work.
The poorly-documented "feature" that will trip you up is that the Macs of that era expect a code on pins 4, 7, and 10 that tells the Mac what kind of display is attached. If no signals are asserted, grounded, or cross-connected with wires or diodes on those pins, the default of "No display attached" gives no picture.
You need an adapter specific to the broad class of displays you intend to connect. There are over 17 different legitimate codes for Mac displays, but frankly, most of them are for obsolete displays. The most common still used are for VGA Display (640 by 480 and Super VGA 640 by 800) and Multiple-Sync display (640 by 480 and 832 by 624 and 1024 by 768 and possibly 1152 by 870) switchable on the fly. And it needs to be specific to older Macs and have the pins and holes on the correct sides. There are other adapters for a different problem that have the pins and holes reversed. -
I need a monitor power supply for HP2711X. Where can I buy one?
I need a monitor power supply for HP2711X. Where can I buy one?
This question was solved.
View Solution.Because the XP597A3 (actually any of these product numbers; XP597AA, XP597A3, XP597AS) is a HP 2011x 20" LCD/LED widescreen monitor. The OP was looking for an A/C adapter power supply for the HP 2711x 27" LCD/LED widescreen monitor, which is product # XP600AA or XP600A3. The adapter power supply I linked to, is the correct part for the 2711x monitor.... that is why not those other parts.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Need to monitor event ID with Event Level :Critical , Also how to generate (powershell or otherwise) an event with Event Level :Critical
Hi
First, we Need to clarify what do you want.
1) You want to Monitor a Windows Event with the severity "Error" (there is no Critical for Windows Events, only Error").
2) You want to create an Event in SCOM. I think you if you talk about "Event" in SCOM you mean actually an Alert.
There is no direct way like a tool/powershell script of only creating an Alert in SCOM only if you are going to use the SCOM SDK
http://msdn.microsoft.com/en-us/library/hh329086.aspx or using the Orchestrator Create Alert activity.
If you want to create a SCOM alert depending on a Windows Event you either can create a rule
http://technet.microsoft.com/en-us/library/ff730470.aspx or a Monitor
http://jimmoldenhauer.blogspot.ch/2013/03/scom-2012-how-to-generate-alerts-from.html
Cheers,
Stefan
Blog: http://blog.scomfaq.ch -
Performance issue entering monitor etc
Dear Sirs,
Our system currently feels quite slow. When entering the monitor for a load, or managing a cube the system it takes a while.
In SM50 I can see it reads at table (sequential) på RSMONIPTAB (which contains 1 millions records).
SAP help.sap.com describes a process u201CArchivation of Request Administration Datau201D, which might help? Look below. However, I do not like the paragraph marked in bold. What kind of features do they reference to.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ead8d7b55e1bd2e10000000a11466f/frameset.htm
Archiving request administration data allows you to store the administration and log information for a request in an archive. In BI, tables store the totals records that the system requires so that the request is not set to red because information is missing. This function allows you to limit the size of the administration and log tables, RSDONE und RSMON. This improves performance for actions performed for the request and in the affected InfoProviders and saves memory space in the database without affecting the status set by the system.
For certain functions and processes that access requests, you have to reload request administration data to the BI administration and log tables.
Any hints on the issue in general; performance issue with monitor, please let me know.
Best regards,
JørgenGuess note below describes gives more info about situation. However, not with a clear solution :=)
SAP Note 694895 - Performance and tables RSMON, RSDONE
Note Language: English Version: 5 Validity: Valid Since 29.11.2005
Summary
Symptom
Tables RSMON* (for example, table RSMONMESS) and tables RS*DONE (for
example, table RSSELDONE) continuously increase in size in the BW system
with each request that is created.
Currently there is no option to reduce these tables.
Do not delete any entries from these tables. If you did, this would have
the following consequences:
When you carry out the next check for the requests for which you have
deleted records from these tables, the check will not run properly.
The status of the relevant requests turns RED in the monitor, and also in
all affected data targets that contain the request.
The affected request and all subsequent requests are no longer visible in
the reporting - all queries on the affected data targets then only display
old data.
Numerous dumps will occur in various situations.
You will not be able to repair the errors caused by the deletion.
More Terms
RSMONMESS; RSSELDONE; Performance; RSMON; RSDONE;
Cause and Prerequisites
This is caused by a program error.
Solution
In the next BW release (BI in SAP NetWeaver 2004s - that is BW 7.0), you
will be able to archive entries from the RSMON* and RS*DONE tables using a
request archiving process that archives the administrative information for
requests.
After archiving, these tables are then considerably reduced in size.
Until then, there is unfortunately no option for reducing the tables. -
How to perform process chain monitoring
Hi All,
can u send me the steps how to perform process chain monitoring and what to do if we get any error in any process in the process chain. if possible if any one have the screen shots how to do kindly send me that link.
Thanks & Regards,
NaveenTransactions used to monitor the Process chains
RSPCM
SE38 >/SSA/BWT or ST13>BW-TOOLS
--> clic on execute --> select the process chains radio button --> execute
--> click on process chains -->if you want to monitor the specific process chain enter the process chain id or if you want to monitor the process chains that are running in a particular date and time interval simply enter the values and click on execute...
it will display the process chains status and time of the runs etc... -
Need to monitor 7201 router without package for Ciscoworks
Hello,
I'm a few months away from upgrading our Ciscoworks platform from LMS 2.6 to 3.1. However, I need to monitor a 7201 router and will not be able to to install the package for that system. I 'm getting snmp traps and get request, but the system is shown as unkown because I don't have the package installed. My support has run out until I get the 3.1 LMS software approved for purchase. Until then is it possible to monitor the 7201 router, I am receiving snmp message but Ciscowork doesn't seem to relate them correctly without the package being installed. I want to monitor the system for reachablity and sent a e-mail message out if it fails that test.
JeffPerhaps something like eWatch would work for you. Leopard will also offer some tracking and monitoring abilities as part of the upgraded Parental Controls.
-
How many platforms we need to monitor in FUSEHQ
how many platforms we need to monitor in FUSEHQ
Hi,
2 way -
2way merge is used when both the repositories are completely different from each other,like sample sales and usage tracking.
Current repository is the one that we merging changes into it
Original repository is Dummy(empty) repository
Modified repository is Usage tracking repository (or) repository that you want to merge.
So here we use three repositories in which one repository is empty.
3 way -
3way merge is used when both the repositories are identical in many ways but with some differences,like BI Apps 7.9.5 and modified 7.9.3 (or) merging developement repository with production repository.
Current repository is Original BI Apps 7.9.5 repository
Original repository is Original BI Apps 7.9.3 repository
Modified repository is Modified 7.9.3 repository
Here we use three repositories.
Regards,
Srikanth -
HELLO EVERYONE I NEED TO MONITOR DTS AUDIO FROM DVD STUDIO PRO AND I NEED A DIGITAL OUTPUT TO DO IT THE QUESTION ID CAN I USE THE DIGIDESIGN MBOX INTERFACE TO DO SO....ANY IDEAS PLEASE
Hi
First, we Need to clarify what do you want.
1) You want to Monitor a Windows Event with the severity "Error" (there is no Critical for Windows Events, only Error").
2) You want to create an Event in SCOM. I think you if you talk about "Event" in SCOM you mean actually an Alert.
There is no direct way like a tool/powershell script of only creating an Alert in SCOM only if you are going to use the SCOM SDK
http://msdn.microsoft.com/en-us/library/hh329086.aspx or using the Orchestrator Create Alert activity.
If you want to create a SCOM alert depending on a Windows Event you either can create a rule
http://technet.microsoft.com/en-us/library/ff730470.aspx or a Monitor
http://jimmoldenhauer.blogspot.ch/2013/03/scom-2012-how-to-generate-alerts-from.html
Cheers,
Stefan
Blog: http://blog.scomfaq.ch -
Need xp performance tool to monitor client-server apps
My Xp/Oracle 61 forms are causing the application to "stall" when many images are displayed. I need a tool that tells me what threshold is hit- to at least point me in the right direction. Is it memory, cpu, graphics cards, what? The XP supplied performance tools are not satisifactory. I need something that is a little more telling. Tell me Oracle, or users who have been where I am going , what is a good tool to isolate the "real" problem?
Check out Process Explorer:
http://www.microsoft.com/technet/sysinternals/ProcessesAndThreads/ProcessExplorer.mspx -
Need to monitor performance - best recommendation
We're going to be doing a dry-run of year-end processing and I was wondering if I could get some feedback on collecting some database performance data.
What should I be using etc...
I am running Oracle 9.2.0.4 on Solaris 9
Any input is appreciated.You should change the format used for the snap_id column in the report. Open the source and change that - add some extra 999.
The same behaviour you can get on all large numbers which should be displayed in the report.
Here is a simple test:
SQL> column dummy format 999
SQL> select 99999 as dummy from dual;
DUMMY
HTH, Joze
Maybe you are looking for
-
Remote not working with new Mac Book Pro
Had my 2.16 MBP for 2 days and cannot get the remote to work. The IR is not disabled, but I cannot select the UNPAIR option so I am guessing the remote is not paired with the MBP. I am pressing the Menu and FFD button, but nothing appears to happen.
-
Website is slow to load when someone first connects
Greetings all. I have a strange problem. I recently installed ColdFusion 11 on a fresh test server running Windows Server 2008 and IIS7. Since this is a test server there isn't really any traffic going to it, so it probably doesn't serve pages but wh
-
i have the linksys wrt54g router. i cant seem to upload files through email or thru aol instant messages. is there something i need to configure in the router to send out files? i have the windows firewall and i already tried to disable it and that d
-
How do I home share my books to someone else?
I am connected to someone wlse's library and their books aren't showing up. How do I get their books?
-
Summarized JIT calls via email
All: We have configured summarized JIT calls to email to vendor which are currently sent daily by batchjob using RSNAST00. We have another vendor that we would like to summarize only once per week. The problem is that RSNAST00 is by output type. I s