Performace panel

where is the performace pannel? I can not type any text even after i have a text box. why

Hello and welcome to the forum!
I am also unfamiliar with a Performance panel, but there is the a Performance dialog. To open the Performance dialog box, go to Photoshop > Preferences > Performance.
If this is not what you're looking for, Bill's troubleshooting suggestions above are a good place to start. To reset the Type Tool options, click on the Type tool (the letter "T" in your Tools bar), then click on the fly-out menu next to the letter "T" in the far left of your Options bar. Click on the cog icon and mouse down to "Reset Tool".
In addition, here's a good thread on the Type tool: http://forums.adobe.com/thread/1070440?tstart=0Please let us know if these suggestions were helpful.

Similar Messages

Overlapping Front Panel Objects

I understand that overlapping front panel controls (booleans, numerics, plots, etc.) will cause a significant update penalty. What about using tab structures or decorations from the modern/classic pallete (such as raised block, recessed block, frame, things like that)? Will this cause a severe penalty in processor time?
Nathan - Certified LabVIEW Developer
Solved!
Go to Solution.

Natan,
Any stacking of objects will cause a performance hit. Now, depending on your program, it may not be a big deal. I did a bit of work with this several years ago, so I am assuming not much (basics, at least) has changed.
LabVIEW basically draws from the bottom up, so whatever you have stacked, the bottom element is drawn, then the one above it, etc. Although I do not know for sure, I expect this happens within the control as well. For example, a numeric control has several layers to it.
When I did all my work, I saw a tremendous hit on performace without too much stacking. The test time was 3:30 with th UI I created. If I did not display the UI at all, I knocked over 45 secs off the test test. With simnplifying the UI, I think I knocked about 30 secs off.
What I also found is that the quality of your graphics chip has significant effects. I was testing with the second model of the PXI controller (this was maybe 12 years ago), I could outperm the PXI controller with a low end PC using MXI because it had a dedicated graphics card that handles the UI updates much faster than the PXI controller.

How to dynamicly add a component to a panel

when I click a button, I want to add a component to a panel, how can I do ?
I try to do this:
public void actionPerformed(ActionEvent e)
contentPane.add(label,"north");
contentPane.repaint;
but there is no effect. Could u help me?

Could you tell me why the repaint method doesn't work?repaint() does some low level validation and its more often suits for refreshing JList,TextFields etc etc...
JPanel is somehow a more weighted component compared to JLabel,JTextFields etc,etc and hence it needs some heavy refreshing and these heavy refreshing can be obtained by doLayout() and validate() and some times both.
when I add a component into another component, how can I get the new performace of the updated component?Is there a universal way? Pls put ur question more clearly.

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Problem with Paining in a Panel in a JFrame.

So I can paint directly on a JFrame, and I can paint on a class that extends Panel, and put the Panel on a JFrame. But if I try to Repaint the Panel it won't show on the JFrame. Do I have to do anything to the JFrame to show the changes to the objects inside as well?

I'm not sure if you've done this, but don't change the paint method when using Swing components, use paintComponent instead. By default, the JFrame will paint its children. Just remember whenever overriding any of the paintComponent methods to call super.paintComponent(g) first.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Open and close a vi front panel dynamically

I created a main vi panel that display all the signal names. I like the main vi to open a new plot screen when I double click on the signal name. I was able to do that using invoke node. But I when I close the plot screen by clicking on the Window "Close" button, the main vi was not able to open a new one again. So I disabled the Window "Close" button and only use the "Stop" button coded in while loop in the blockdigram of the plot screen. It worked, but the plot screen is still open and changed to editing mode. Is there an easy way to close the plot screen by only one click. Another question is that how does the main vi can open multiple plot screens. Thanks for your advice.

I think I know what happens:
If you close the front panel of a sub-vi, the code is still running, so the VI doesn't terminate and somehow you can't address it (it don't know how you communicate with your sub-vi).
So in your sub-vi you should monitor the panel-close event, and finish the code of the VI and finish the VI
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Open and Close Front Panel of SubVI

Hi all,
Running LabVIEW 2011 on Windows 7 x64. I am trying to get a subVI front panel to open from my main FP with the press of a button and then close with a button press in the subVI. Here is the piece from my main FP that calls the VI and opens the FP
Plots is defined in another loop and all of the loops are in a flat sequence. I did it this way because I want it to start with the first press and not stop my main loop from running. I have moved the item in the left loop around a lot so I'm not sure if I can run that in the same loop as the event or not. Either way opening the VI seems to work fine.
The problem shows up when trying to close the subVI for the SECOND time. The code is here:
As I said, the first time I open and close the VI everything works as I expect it should. I am then able to open it again but now the "blank button" doesn't function and I can't close the window or even open the block diagram to probe anything. I have been trying to figure this out for awhile, any insite would be greatly appreciated!
Thanks
Solved!
Go to Solution.

Its good that you found the bug.
This code may serve as a way for you to compare notes.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Spry Collapsible panel - open and closed default question...

I am using a Spry Collapsible panel in a vertical nav menu (DW CS4) and it's in a template for my site. I want it to be closed as default on the Home page, but when a visitor clicks to open it and selects their option, I would like it to remain open on the selected page - Is there a way to do this?
Thank you all!
Aza

Check out the examples on this page: http://www.spry-it.com/examples/spry-widget-cookie-history/#collapsiblepanel

Studio 12.1 Performace Analyzer 7.7 problem, with 'er_print' utility.

I am having a minor but nagging problem with a regression in the er_print utility of the Sun Performance Analyzer suite bundled in Studio 12. is there maybe a patch available or in the works?
I have not had any success in finding a resolution by searching the open literature
The issue is that the callers-callees listing only dumps functions in alphabetical order, ignoring the sort order specified by sort. This is a regression from the Performance Analyzer (7.4) behavior from Sun Studio 10. We only recently jumped to studio 12.1.
This functionality is documented here: http://docs.sun.com/app/docs/doc/821-0304/afaid?a=view (as well as many other references). To quote:
callers-callees
Print the callers-callees panel for each of the functions, in the order specified by the function sort metric (sort)."
I use a script input to er_print that in the past analyzed the top N functions sorted on inclusive thread time. Now I have to be sure to dump ALL functions and need a third-party search tool to find that information in the resulting report.
Has anyone heard of this problem or are there Performance Analyzer patch(es) available. I saw some for 7.6 and another for unspecified but have not seen this problem in patch notices.
Thanks.
Regards,
Steve

Nik, thanks for taking a look. We can't go to 12.2 because we're a software developer and we'll lose our binary compatibility with the release we've been building for the last few months. I'm a systems guy and will paste in a developer's example below.
Note Marc's url shows a 12.1 Performance Analyzer patch 142369-01 we have not yet installed. The patch notice description doesn't show much. I'll pass on patch info to remote user/developer.
Developer example:
I use a script input to er_print that in the past analyzed the top N functions sorted on inclusive thread time. Now I have to be sure to dump ALL functions and need a third-party search tool to find that information in the resulting report.
Heres a shortened (only 4) example of the behavior Im seeing the focus of the functions in callers-callees are NOT those of the functions determined by the sort metric.
= = = =
sysun046% er_print /scratch/test.4.er
/scratch/test.4.er: Experiment has warnings, see header for details
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) sort i.total
Current Sort Metric: Inclusive Total Thread Time ( i.total )
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) cmetrics a.total:e.user:i.user:e.total:i.total
Current caller-callee metrics: a.total:e.user:i.user:e.total:i.total:name
Current caller-callee sort metric: Attributed Total Thread Time ( a.total )
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) limit 4
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) sample_select 22-53
Exp Sel Total
=== ===== =====
1 22-53 57
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) functions
Functions sorted by metric: Inclusive Total Thread Time
Excl. Incl. Incl. Total Name
User CPU User CPU Thread
sec. sec. sec.
26.015 26.015 113.530 <Total>
0. 26.015 113.530 ACE_Task_Base::svc_run(void*)
0. 26.015 113.530 ACE_Thread_Adapter::invoke()
0. 26.015 113.530 ORB_Task::svc()
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) callers-callees
Functions sorted by metric: Inclusive Total Thread Time
Callers and callees sorted by metric: Attributed Total Thread Time
Attr. Total Excl. Incl. Excl. Total Incl. Total Name
Thread User CPU User CPU Thread Thread
sec. sec. sec. sec. sec.
113.530 26.015 26.015 113.530 113.530 *<Total>
113.530 0. 26.015 0. 113.530 lwpstart
Attr. Total Excl. Incl. Excl. Total Incl. Total Name
Thread User CPU User CPU Thread Thread
sec. sec. sec. sec. sec.
0.010 0. 0.010 0. 0.010 ACE_Message_Block::clone(unsigned long)const
0. 0. 0.010 0. 0.010 *ACE_Data_Block::clone(unsigned long)const
0.010 0.398 0.398 0.398 0.398 memcpy
Attr. Total Excl. Incl. Excl. Total Incl. Total Name
Thread User CPU User CPU Thread Thread
sec. sec. sec. sec. sec.
0.001 0. 0.003 0. 0.011 ACE_Select_Reactor_T<ACE_Select_Reactor_Token_T<ACE_Token> >::resume_handler(int)
0.001 0.001 0.001 0.001 0.001 *ACE_Guard<ACE_Select_Reactor_Token_T<ACE_Token> >::release()
Attr. Total Excl. Incl. Excl. Total Incl. Total Name
Thread User CPU User CPU Thread Thread
sec. sec. sec. sec. sec.
0.010 0. 0.010 0. 0.010 TAO_Synch_Queued_Message::clone(ACE_Allocator*)
0. 0. 0.010 0. 0.010 *ACE_Message_Block::clone(unsigned long)const
0.010 0. 0.010 0. 0.010 ACE_Data_Block::clone(unsigned long)const
= = = = =
Nik, thanks for taking a look.
Steve

Image in Links panel displays as overset but may not exist

I am having a serious problem with an InDesign file and of course the blueline corrections were due half an hour ago. An image is appearing in my links panel as hidden in overset text. There is no overset text showing in my preflight profile. I can't go to the image since it gives me an error message indicating that it is hidden in overset text. This appeared for the first time in the file a couple of hours ago during which time, I have not placed any images.
Exporting to idml, deleting prefs and other types of options has not helped including going to the structured panel and trying to find the file or preceived file by ID in the Story editor. Is there any other way to remove this image from the Links panel? I believe this is what is also causing my system to slow to a crawl. This is a college schedule which has been linked to InCopy files. I have deleted the links to InCopy in case that was part of the problem but nothing seems to make a difference.
This is a Mac using InDesign CS5.5.

It looks like I have to recreate the file, another 6 hours of work after spending all day trying to resolve the issue. I wish it was as simple as just as reflowing it but there are too many column adjustments I had to make, which I try to stay away from, but could not avoid in this file. What is strange is that even after deleting all of the text in this file, all of the images are now listed as OV in the links panel instead of going away. This has happened in the past with InCopy stories but we have been able to delete the links from the panel. Unfortunately, I can't find a way to delete these image links from the Links panel despite the fact that they no longer exist. I will start with a new file and at least flow in the tagged text format but I am now on edge that this could happen again since I do not know the cause.

Excel-2007 cannot connect to Oracle ODBC data source, Control Panel can.


I cannot make an ODBC connection from Exce-2007 to Oracle work. I am an expert Excel and VBA user (since 1994) and I have frequently used Excel to access ODBC databases, including Oracle (I have done this with Excel-2003 both with worksheet queries and have written VBA ADO-connection routines). And even though in Excel-2007 a worksheet ODBC query is supposed to be easier to create than in previous version of Excel, my connection fails. Any suggestions and all help are welcome and much appreciated.
DETAILS


1) What is my system? I am using Excel-2007 on Windows Vista x64 and Oracle server v.11g on my computer (all this is on my computer, no network issues).
2) Why use Excel with Oracle at all? I use Excel-2007 to access Oracle rather than Access-2007 (or any other application like TOAD, etc.) because I do engineering calculations with the data stored in Oracle. These calculations are easier done in Excel (I suppose that one alternative to this could be to use some sql or Access to get the data from the database, then store it as plain vanilla CSV file, then open this file in Excel, then do the math (the math involves complex optimisation algorithms), then save the results as CSV, then use some sql or Access to put the data back into the database. Howwever this does not strike me as a quick or neat solution. And after all Excel has been designed to access ODBC databases, so why not use it?)
3) What do I do in Excel-2007 that won't work? I create an ODBC link to Oracle that does not work. In Excel-2007 this is straightforward:

<ul>
<li>define an ODBC connection (Data tab --> From other sources --> From data connection wizard);</li>
<li>define a query on the worksheet -- that's it, this is all!</li>
</ul>

I start with creating an ODBC connection:
a) I choose an ODBC data source type: ODBC DSN
b) Excel-2007 displays the list of the available ODBC data sources. I see in it my Oracle database name and I select it.
c) Excel-2007 displays the Data Link Properties:
- the "Provider" has a list of the OLE DB drivers with preselected "Microsoft OLE DB Provider for ODBC Drivers". I keep this default selection.
- the "Connection" tab has a connection string "DSN=<my database name>" which I keep, it also has fields for the user name and the password, which I fill with the correct credentials.
- Finally there is a button "Test Connection", which when I click produces the following error message:
"Test connection failed because of an error in initializing provider. 
Unespecified error"

4) Additional food for thought:
a) In the above walk-through the only data, which I type, are the user name and password, everything else is selected from lists offered by Excel-2007, hence any possibility of typos being the cause of the problem can safely be discarded.
b) I can test the ODBC driver in the Control Panel and it shows that it can connect to the Oracle database:
- in Control Panel --> Admin Tools --> Data Sources (ODBC) on the "User DSN" tab I can see the list of the available ODBC data sources (same list as in Excel-2007, point 3b above) with the name of my database in it;
- selecting the name of my database from the list of the sources and clicking "Configure" button opens a tab with Data Source Name (same as in Excel-2007), TNS Service Name and User ID. I enter <user name>/<password> and click "Test Connection" button. A message "Connection successful" appears (just for a test I enter incorrect user credentials and "Unable to connect" message appears)
BOTTOM LINE


The procedure for using an ODBC connection from Excel is very simple, in the past I have created and used such connections numerous times with Excel-2003 and earlier on Win-XP and earlier. But now on Excel-2007 and Vista-x64 I cannot make it work.
Also, testing an ODBC connection driver is really easy and simple to be done in the Control Panel. There testing the same ODBC connection, which fails in Excel-2007, results in success.
I am frustrated by the simplicity of the problem and yet the persistant error. I have lost now two full days in failed attempts to make the simple procedure work and in searching the internet for answers.
All help is highly appreciated <img class="emoticon" src="images/emoticons/happy.gif" border="0" alt="" width="16" height="16" />,
Plamen


Did you find the solution to your problem?
If not, I think I may know.
Excel 2007 is a 32-bit application.
When installing 32-bit applications in a 64-bit environment, the "default" location is:
C:\Program files (x86)\...
Excel then launches from this location.
However, when it connects to Oracle and passes the name of the calling program, Oracle attempts to "interpret" the value of (x86) as if
the value within the parenthesis are being passed as a reference. Of course, iOracle doesn't find anything, so the result is (),
and then it cannot return the connection info back to the calling application.
I corrected it by installing Excel in C:\Program Files\, and once launched from that location, it works the same as on the 32-bit machines.
However, at my location, they are FORCING Excel to be installed in the(x86) location.
What I'm trying to discover now is:
Is it possible to flag Oracle to NOT process the embedded variables?
Or, is it possible to assign a variable in Oracle such that x86 = "(x86)", so that the end result is viable?
Have you had any luck with your installation?
thanks,
Paul

Collapsible Panels - Links to open one, and close others

Hi,
I am new to Dreamweaver and have been creating my site by
learning as I go along. I have already read through all the other
related topics associated with Collapsible Panels on this blog and
have still not found an answer. I have been able to open and close
Collapsible Panels by using links - but unfortunately, I need more
than just opening and closing.
On my site i have approximately 5 pages, all with the same
header and Menu bar. The Information (that i have presented in
numerous Collapsible Panels) does however vary from page to page.
What I need to try and figure out is:
How can I open one collapsible panel and close all others? I
have seen the one example which leads to my next question:
How can I group Panels? Some examples of how to open one and
close all others use this grouping. Is there any other way of
opening one and closing all others without grouping?
Lastly, is it possible to set up a link that can be viewed on
one page which when clicked opens the relevant page and collapsible
panel? i.e. on my About Us page there is a link (using the Menu
bar) for one of my several services on the services drop down menu
(but services is on a different page with the same setup). When a
viewer clicks on the specific service, is it possible to get the
site to open the services page, and open the relevant collapsible
panel (with all other Panels closed)?
Any assistance would be greatly appreciated - I have been
searching for days now and cannot seem to find any
answers/directions in laymans terms.
Kind regards,
John

wlsjoh013 wrote:
> Hi,
>
> I am new to Dreamweaver and have been creating my site
by learning as I go
> along. I have already read through all the other related
topics associated
> with Collapsible Panels on this blog and have still not
found an answer. I
> have been able to open and close Collapsible Panels by
using links - but
> unfortunately, I need more than just opening and
closing.
>
> On my site i have approximately 5 pages, all with the
same header and Menu
> bar. The Information (that i have presented in numerous
Collapsible Panels)
> does however vary from page to page. What I need to try
and figure out is:
>
> How can I open one collapsible panel and close all
others? I have seen the one
> example which leads to my next question:
This page has an example that has a link that can open and
close a panel:
http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/collapsible_panel_sample. htm
One way to do this would be to have a single link that would
open one of your panels using the code, but then add to it code
that closes each of the other panels, for example:
<a href="#"
onclick="CollapsiblePanel4.open();CollapsiblePanel5.close();CollapsiblePanel6.close();">O pen
4, close 5 and 6</a>
To make this work, you'll need to look that the panel
constructors at the bottom of your page and make sure to match up
the panel variable names i.e. "var CollapsiblePanel1 =...." the
variable is CollapsiblePanel1.
You could also write a function that gathers together the
various panels you have on the page and then pass to it only the
panel that you want kept open. For now, though, it might be best to
use the above method, given your expertise. And taking that even
further, you could apply the function call unobtrusively. Both the
function call and the unobtrusive part you can work on later to get
this working for now.
> How can I group Panels? Some examples of how to open one
and close all others
> use this grouping. Is there any other way of opening one
and closing all
> others without grouping?
This is a little confusing, on one hand you ask about how to
group, but then ask how not to group. There is a concept of a
collapsible panel group:
http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/CollapsiblePanelGroupSamp le.html
But there is another type of group, that may be more what
you're looking for, and that's an Accordion panel, which is similar
to the collapsible panel group, with the exception that it can only
have one panel open at a time.
> Lastly, is it possible to set up a link that can be
viewed on one page which
> when clicked opens the relevant page and collapsible
panel? i.e. on my About Us
> page there is a link (using the Menu bar) for one of my
several services on the
> services drop down menu (but services is on a different
page with the same
> setup). When a viewer clicks on the specific service, is
it possible to get
> the site to open the services page, and open the
relevant collapsible panel
> (with all other Panels closed)?
Probably the easiest way to do this particular one would be
to make sure that you have all of the panels set to be closed when
the page loads, and then take a look at the code for the last
example on this page:
http://labs.adobe.com/technologies/spry/samples/utils/URLUtilsSample.html
That example uses a tabbed panel, but the concept is the
same, use a URL parameter to determine what to show. You'll need to
link in the SpryURLUtils file in the Spry download package (look in
the includes folder):
http://labs.adobe.com/technologies/spry/home.html
Essentially, your link will look similar to:
sample.html?panel=1
Then your code could look something like:
var params = Spry.Utils.getLocationParamsAsObject();
var CollapsiblePanel1 = new
Spry.Widget.CollapsiblePanel("CollapsiblePanel1",
{contentIsOpen:(params.panel==1 )} );
var CollapsiblePanel2 = new
Spry.Widget.CollapsiblePanel("CollapsiblePanel2",
{contentIsOpen:(params.panel==2 )} );
Basically what this is doing is creating an object from the
URL parameters. Then for each of the panels the constructor has
code that determines whether or not to expand the panel when the
page loads. So it checks the value of params.panel to see if it
matches 1 (for the first one), if it does, then that means that
contentIsOpen is set to true, if it is some other number or is not
present at all, then that means that the panel is closed. This
would then be repeated down the line for how ever many panels you
want to operate like that.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

Office 2013 64Bit on WIN 8.1 64bit MAIL control panel

Hey guys I found out that after installing Office 2013 home and business (64bit office only) on a windows 8.1 pro 64bit the mail options in the control panel will not open or come up to create new profiles. This seems to only happen with the 64bit version
of office 2013 on windows 8.1.
I think this only happens after already configuring a exchange account rebooting and then trying to open mail from the control panel. it doesn't seem to matter if you are a admin or not. For the time being those with the same issue as me just remove the
old profile from the registry or make changes to the profile via the registry
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Profile
again this is only an issue on the 64bit version of office 32bit works fine
http://WrinkleFreeIT.com/

Backup up your registry first.
This is impossible to fathom a new install of Windows 8.1 with Office 2013 and the control panel mail app will not open. Client believes you're a complete dill!
The problem we needed to solve was to create 2 exchange email accounts with profile options on outlook start up. We couldn't create the second account while outlook was running and control panel mail would not respond.
This is how it worked for me. Created the first email account by starting outlook and providing the account information during the initial setup of the exchange account.
But what about the second account. Have to start the mail from control panel.
Navigate to HKCU\Software\Microsoft\Office15.0\Outlook
Select DefaultProfile and delete the name of the profile.
Next navigate to HKCU\Software\Microsoft\Exchange\
Create a Key and name it Client
Navigate to Client and create a key and name it Options
In Options add a new String Value and name it PickLogonProfile
Press Enter and set the value to 1
Start Outlook and you will be prompted to select a profile or create a new profile. Hooray!
If there are any corrupt profiles that present while selecting a profile in outlook, then navigate to HKCU\Software\Microsoft\Office\15.0\outlook\Profiles and delete corrupted profiles.
Good Luck.

Is there a way to make the Markers panel work better with the Source panel?

My workflow is to first cut a multi-cam project (but it could be any long clip), then watch it all over again to make notes about what to keep and what to kick. So after I'm done cutting the initial rough cut of the entire hour or two of footage, I'll set focus to the Markers panel and begin watching the entire clip from the beginning to make notes as markers within the clip.
I'll play the clip back in the Source monitor and when something interesting happens, I'll type "M" on the keyboard. This places a marker in the clip (or multi-cam clip in my case). Without stopping the clip, I'll pick up my mouse and tap the Markers tab in the notes section for the last marker laid down. I'll type a note (something like "S" for interesting "Shot" or "HUGS" or "DANCING" to indicate the main action occuring at this point in the clip, or "Mike: Are we there, yet?" for a key dialog point). Next, I'll move my mouse back to the Source panel (the video has not stopped this entire time) and give any gray area of the Source panel a tap just to activate it. I'll watch for the next point of interest and repeat the process. M to mark. Move to the Markers panel. Tap the last marker. Type some notes. Move back to the Source panel and tap to give the panel focus. This works fairly well, but could be tuned, with just a few options, to make it more streamlined for this type of use.
What I'd like to be able to do is never leave the keyboard AND use minimal keyboard shortcuts. A perfect workflow might be:
1. Start playing the clip in the Source panel.
2. Type "M" to drop a marker. Focus would AUTOMATICALLY move to the notes section of that marker within the Markers panel, while the video continues to play on in the Source panel.
3. I type my notes into the Markers panel and hit Enter, or CTRL+Enter, which returns focus to the Source panel.
This would allow me to quickly build a list of markers and notes about a clip or sequence without ever stopping and without once touching my mouse (unless I get behind and need to backup). Currently, the only time I really get behind is when clicking on a window and not realizing that focus was not given to that window, so that when I hit "M" again, for example, I don't actually create a new marker, but rather add the letter "M" to my most recent Marker note.
All of this seems a very common task for anyone who works in reality TV, or even event videography. Who's with me? Can this be done already? If not, I'll submit a feature request. How would you make this feature better?

Sounds like you did this on the fly.
MM is supposed to open the Marker Panel Dialogue
M just sets a marker
Not sure if either are intended for on the fly during playback .
There is also a Marker Icon on the Source Window Pane >>

Performace panel

Similar Messages

Maybe you are looking for