Performance Analysers for ALBPM Processing Times

Hi,
Do we have any performance analysers for albpm, which gives us an accurate time taken by each of the automatic activity, for loading of forms, on submission of forms etc? We need to measure the performance of our application on a server, to see where the delay is happening.
Regards,
Sree

Hi Carola,
For your queries:
If there are several data sources on one query - is the query execute once or as many times as I have data sources?  - You have the option to Refresh All - this action will refresh all the queries in your work book with one click.
Is the processing done parallel or sequential - can I influence the processing? - Yes, you can influence the processing in sequence by refreshing only desired query at a time, right click on active cell by placing with in the query region and select Refresh option.
Hope this helps!
Regards,
Uday

Similar Messages

  • Scheduling Agreement - Priority for GR Processing Time

    Dear Forum Members,
    While defining Scheduling agreement for a material we can define the GR processing time and Planned Delivery time,likewise we
    define in the material master also.
    1.While running MRP which one has the higher priority?
    2.After running MRP for the schedule line we are able to see only the delivery date,is there any setting to display the release date
    or the start date based on the planned delivery time of the scheduling agreement?
    Please suggest.
    Regards
    S Mangalraj

    Hi Mangalraj,
    For your question:
    1.While running MRP which one has the higher priority?
    -->GR processing time MRP-run will take it from material master data
    -->Planned delivery time, you can use t-code OMI8 to define the higher priority of SA or material master data
    2.After running MRP for the schedule line we are able to see only the delivery date,is there any setting to display the release date or the start date based on the planned delivery time of the scheduling agreement?
    -->Yes, in standard SAP system, you only can see the delivery date after MRP-run! As to the release date or the starte date which take planned delivery time of SA into account, it's only used to inform the buyer with purchasing transaction.
    Hope my answers can help you!
    Good luck
    Tao

  • Field for GR Processing time in CLM

    Hi Experts,
    Is there any suitable field available in standard CLM system to maintain "GR processing time" in master agreement line item, to publish it into ECC?
    I also request to advice business relevance of below fields of master agreement line item (in CLM). If we maintain values in those fields of a master agreement and publish data to ERP, which of the fields in outline agreement must update?
    Field
    Description
    Program Lead Time (Days)
    Enter the lead time required to set up the program, if any.
    Order Lead Time (Days)
    Enter the lead time the supplier requires to place orders for items.
    Delivery Lead Time (Days)
    Enter the number of days to allow between order and delivery of the line item.
    Minimum Order Quantity
    Enter the minimum quantity of the line item you are contracted to order from the supplier.
    Please advice.
    With regards,
    Prabhakar

    Hi
    If GR processing time in Material Master say 5 days Then..
    During MRP run or when Scheduling or forcasting is done then this Lead time will be addd...
    Now inhouse production time eg 5 in days ......means it  determine the planned dates for planned orders in materials planning.
    This will add little valu in your understanding..
    Sujit

  • Performance measure for BPEL process using Oracle BPEL Process Analytics

    Hi All,
    For measuring perfomance of a bpel process, can we use Process Analytics? Is this to be purchased separately? Is any other tool available which can be used measuring performance of a bpel process. & produces graphical reports etc? (product / open source)
    Your help is highly appreciated.
    Thanks in advance.
    Regards

    yeah you are 100% correct ..
    I have attached some stuff for CDH integration, where we used plsql to send out info on a created record to a queue.
    CREATE OR REPLACE
    TYPE XXBPEL_MESSAGE_TYPE AS OBJECT (
    MSG_ID VARCHAR2(128),
    INREPLYTO_MSG_ID VARCHAR2(128),
    FROM_PARTY VARCHAR2(512),
    TO_PARTY VARCHAR2(512),
    ACTION_NAME VARCHAR2(512),
    MSG_TYPE INT,
    PAYLOAD CLOB,
    ATTACHMENT BLOB
    EXECUTE DBMS_AQADM.create_queue_table (queue_table => 'XXBPEL_QTAB',queue_payload_type => 'XXBPEL_MESSAGE_TYPE',multiple_consumers => TRUE);
    EXECUTE DBMS_AQADM.create_queue (queue_name => 'XXBPEL_OUT_QUEUE',queue_table => 'XXBPEL_QTAB');
    EXECUTE DBMS_AQADM.start_queue(queue_name => 'XXBPEL_OUT_QUEUE',dequeue => TRUE,enqueue => TRUE);
    On BPEL side creata a process that listens to this queue (with and AQ partnerlink) as shown in $BPEL_HOME/integration\orabpel\samples\tutorials\124.AQAdapter\MulticonsumerInbound
    thx clemens

  • GR processing time can be customer based

    Hi,
       Would like to know whether for  GR Processing Time can be customer based instead of setup in Material master?
       Please kindly advise. Thanks
    Regards,
    shirley

    Hi There
    What you meant by shortage,,,
    AV- Available date,
    GR- Availble date+GR processing time
    if you have not set up the GR processing time in Master, it may come as ZERO days,, so AV and GR date may be same,,
    if this is not your quesry, please provide more details on your query,,,
    Thanks
    Senthil

  • Problem in updating the GR processing time using BAPI 'BAPI_SAG_CHANGE'

    Hi,
    I am using the BAPI 'BAPI_SAG_CHANGE' for uopdating the GR processing time(BAPIMEOUTITEM-GR_PR_TIME) of the scheduling agreements.
    Issue: when there is no value maintained for GR processing time for a particular scheduling agreemnet the BAPI updates the GR processing time successfully but when there is some value already existing for a particular scheculing agreement then the BAPI does not update this field eventhough the return parameter shows the message 'successfully updated'.   
    Can somebody suggest what could be the reason.
    OR
    Is there any other way/FM to update the scheduling agreements.  
    Thanks,
    Ravindra

    This appears to be old-style BAPI, with ....X tables.  Did you populate the field in the X version of the outitem for the column(s) to be changed?  Did you call the COMMIT bapi after the update?

  • IPhoto was working fine. Performed update for HP printer, which  should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

    iPhoto was working fine. Performed update for HP printer, which  should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • SRM error 'process time remaining' for Rfx

    The simultaneous opening of the  RFxs were performed. But it was not possible to open the offers as the system was showing ' process time remaining'. At that time the times remaining for the 3 RFxs  was shown around 4 hours 30 minutes. The offers were tried to open next day. Again the system was showing ' process time remaining', but the time remaining for the 3 RFxs are shown about 2 hours .Please suggest .

    Hi Srvinivas,
    The following documents may be of some help to you:
    http://help.sap.com/saphelp_srm701/helpdata/en/38/37aa392d61407089454548b98355a8/content.htm
    SRM, Strategic Sourcing Innovations
    http://help.sap.com/saphelp_srm701/helpdata/en/1f/4b5f5130eb4c7db21f03fa94e5bb3f/content.htm
    Tender Fee Processing
    http://help.sap.com/saphelp_srm702/helpdata/EN/73/bf0af1223b405d8380cd2dfc9e5fd3/content.htm
    Earnest Money Deposit Processing
    http://help.sap.com/saphelp_srm702/helpdata/EN/ef/fab812e046468396262858d447d8aa/content.htm
    Simultaneous Logon at RFx Response Opening
    http://help.sap.com/saphelp_srm702/helpdata/EN/38/37aa392d61407089454548b98355a8/content.htm
    Also as far as I am aware, by default, simultaneous logon is only available for RFXs with two-envelope RFX responses. The following is a detailed explanation of the process from 1 of my colleagues:
    Two-Envelope response opening process:
    01. Buyer creates a RFx/Bid invitation with the transaction type that
        is configured for two envelope bidding.
    02. Enter the mandatory datas: submission deadline, bidders, items,
        permissions for technical/price/tender fee opening, etc
    03. Publish RFx.
    04. Login with bidder and "Participate" to receive emails.
    05. If tender fee is requested, then pay tender fee with bidder user.
    06. Create a Response with bidder user and submit.
    07. Now you have to wait till the submission deadline has been passed
        to give the chance for the other bidders to participate in the RFx
        process.
    08. After the submission deadline has been passed the buyer has to
        "Initiate Price/Technical RFx Response Opening" for a certain given
        time (which can be set earlier.)
    09. A new window will pop up to start the simultaneous logon.
    10. Provide password and hit the approve button.
    11. The pop up window will display Technical Opener's name.
        We can see the time remaining to perform the Technical opening
    12. In the next step, we will have to login to perform the technical
        opening. Do NOT close this window or do NOT logoff from the portal.
        If you think you will require more time to perform the technical
        opening you can extend this time. This will give additional minutes
        to perform the opening.
    13. To perform technical opening:
        Login to WTS or open a new session of Internet Explorer and login
        to Portal. At this point in time, you will have two sessions:
        - one on your local computer
        - and one in WTS/New session
    14. Open the rfx and click on Open technical rfx response.
    15. The Technical Opener/Reviewer now authenticates himself/herself by
        entering the password. After it hit "Approve" button.
    16. In the next step you will receive a message:
        "User approval successful"
    17. The Simultaneous Logon and opening of technical/price RFx response
        is now performed.
    18. Hit on Close button to close the pop up.
    19. Hit on Close to close the RFx screen.
    20. You have to wait till the Response opening time has been passed.
    21. After the time has been passed the Response can be opened.
    If the document changes in the meantime and if it needs approval (no
    automatic approval is configured) then you have approve the documents
    in the process with a given user.
    I hope that this helps.
    Kind regards,
    Conor

  • Why the processing time for loading is taking longtime

    Hi All,
              why  the processing time for loading is taking longtime i want to know the soltion.
    Thanks,
    chandu

    To analyze the process chain and fix it, go through the below document:
    [SAP BW Data Load Performance Analysis and Tuning|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b]
    Hope it helps,
    Naveen

  • Performance Problem when executing the report for the first time.

    Hi,
    We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
    But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
    Thanks,
    Kiran.

    Hi all,
    Appreciate your valuable replies...
    @ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
    @Siegfried Boes  : for testing purpose Im running this manytimes..but for user they may
    require when ever they need to know open oders.the volume of the data is barongs 300-350 at
    max.
    @Brad Bohn  : After creating the index the repose time reduced to half ...i hope  i have
    created a right index.
    Observation here...I executed the report in production system more than 5 times it took the
    same time, my changes are still in quality..so i think may be for selecting the right index
    its taking this much time.and for the next time is taking right index n doing it so it taking
    less.
    Do you accept it?.if so Please let me know how to explicitly say the select statement to
    use my index.
    Thanks,
    kiran.

  • How to show the processing time taken for a BPEL process in BAM report.

    Hi All,
    I have the data as below in the Data object. I would like to show the time taken for each order to complete in the report.
    instance Id     order Id     product Name     product Code     price     status     instance Time      updaterName
    1360010     ord004     Guitar     prod003     2000     requested     9/22/2008 12:12:11 PM     Invoke_InsertSalesOrder
    1360010     ord004     Guitar     prod003     2000     Approved     9/22/2008 12:15:11 PM     Invoke_OrderStatusUpdate
    This data comes from simple BPEL process where sensors are configured at the start and end of BPEL process. Also have a human task activity in between to create the time difference.
    In Enterprise link design studio, I tried to calculate the time difference using expression calculator and store it as calculated field. But that doesn't seems to work because when I execute the plan, second sensor data reaches only after human approval whereas first sensor data would be waiting for calculation and ultimately nothing comes into data object.
    How and where the calculation be done to show the processing time in the report. Please someone throw some light on this.
    Regards
    Jude.
    Edited by: user600726 on Sep 30, 2008 1:30 AM

    I would suggest modifying your data object so that the data can all be in a single row and use the sensor at the end of the process to upsert (update) the row created by the sensor at the start of the process. The time difference between two fields in the same row is then an easy calculation on a BAM report -- No EL plan should be needed.

  • How to calculate the Processing time for material based on its route ?

    Hello experts,
    I would like to calculate the Scheduled in-house production time based on route.
    Actually this is done in the prod. route in tcode CA02. (via menu Extras => scheduling => schedule).
    After getting the schedule table press the 'scheduling results' button I received the Processing time, Setup and teardown time,... Scheduled in-house production time.
    So I'm looking for a function or any tool to use it in report.
    thanks,
    Eli

    hi,
    from routing screen,extras>scheduling>schedule(give a variant name)>scheduling results>update material master.this writes the info in the temp file.use tcode CA96 to update material master.this updates lot size dependent in house production time in work scheduling view of material master and  deletes the lot size independent inhouse prod, time in MRP2 view.this tool gives more accurate results  for your  inhouse prod. time.
    > Hello experts,
    > I would like to calculate the Scheduled in-house
    > production time based on route.
    > Actually this is done in the prod. route in tcode
    > CA02. (via menu Extras => scheduling => schedule).
    > After getting the schedule table press the
    > 'scheduling results' button I received the Processing
    > time, Setup and teardown time,... Scheduled in-house
    > production time.
    > So I'm looking for a function or any tool to use it
    > in report.
    >
    > thanks,
    > Eli

  • Active Directory Replication, have not been performed for a long time

    Good afternoon, 
    Situation: in the organization with a lot of domain controllers, with one of the sites lost contact. From the period of 18.07.2014 - for the present time, the replication of the two domain controllers did not happen. Now, the connection is reestablished in
    magazines replication errors occurred. Replication is performed using DFS. 
    errors: 
    The journal replication DFS: 
    The DFS Replication service has detected an error in the connection to the partner for replication group Domain System Volume. 
    For more information: 
    Error 1825 (Error in the security package.) 
    Connection ID: F29C3738-AF90-4CE8-BFC0-48C1B36A5819 
    The ID of the replication group: 72D953C6-FD0A-4DA0-8D91-2C0B144E45A1 
    In the system log: 
    The Kerberos client received an error from the server KRB_AP_ERR_MODIFIED SERVERNAME $. Used the final name DNS \ SERVERNAME $. This means that the target server failed to decrypt the ticket provided by the client. This may be due to the fact that the SPN
    is the destination server (SPN) is registered on an account other than the account used by the ultimate service. Make sure that the final SPN is registered only on the account that is used by the server. This error may also be that the final service is using
    a different password for the account of finite life that is different from the password key distribution center Kerberos (KDC) for the account of finite life. Make sure that the service on the server and the KDC are updated to use the current password. If
    the server name is not fully defined, and the target domain is different from the client's domain, check for server accounts with the same name in these two domains, or use the full name to identify the server. 
    This error occurs when you try to access any network resource problem servers. 
    Storage of deleted AD objects installed by default 180 days. 
    Solutions found, can someone faced with similar circumstances. I would not want to lower the domain controllers on the problematic servers and deploy them again. After all objects created will be lost during this period, they are the whole domain is not much,
    but they are
    The result of repadmin / showrepl - this error, on all servers: 
       SITE \ SERVER via RPC 
             DSA - GUID of the object: 5f01bea8-b74b-4876-b475-be712a191431 
             Last attempt @ 15/10/2014 13:00:35 completed with an error, the result - 
    2146893022 (0x80090322): 
                 Principal Name is incorrect. 
             7579 consecutive errors. 
             Last success @ 07/28/2014 14:15:41. 
            SITE \ SERVER via RPC 
             DSA - GUID of the object: 436c1016-4363-47b5-a34d-2e5b3e2b0038 
             Last attempt @ 15/10/2014 13:00:35 completed with an error, the result of 5 
      (0x5): 
                 Access is denied. 
             7579 consecutive errors. 
             Last success @ 07/28/2014 14:15:42. 
            SITE \ SERVER via RPC 
             DSA - GUID of the object: b677e990-f7cb-4daf-8f87-16602bc119e0 
             Last attempt @ 15/10/2014 13:00:35 completed with an error, the result - 
    2146893022 (0x80090322): 
                 Principal Name is incorrect. 
             7579 consecutive errors. 
             Last success @ 07/28/2014 14:15:43. 
            SITE \ SERVER via RPC 
             DSA - GUID of the object: 5afbb9b1-7558-4f97-b941-84e1845b48ce 
             Last attempt @ 15/10/2014 13:00:35 completed with an error, the result - 
    2146893022 (0x80090322): 
                 Principal Name is incorrect. 
             7579 consecutive errors. 
             Last success @ 07/28/2014 14:15:43.
    netdom resetpwd / s: NameWorkDC / ud: domain \ administrator_domen / pd: password 
    Failed to reset the password for the local computer account. 
    Login failure: The target account name is incorrect. 
    Failed to execute the command. 
    If I execute the command, and as a server pointing, use the second server of the same site (which have not replicated on the same site). The command is executed successfully. 
    If I specify as the /server - IP address of work DC, operating a server running KDC - the command is executed successfully. 
    Generally, the problem with the controller, I can not get access to any of the listed on the main market, produces an error. You might not have permission to use this resource. 
    BUT if we turn on the IP, - let without the need to enter login and password.
    Please help, what Microsoft's recommendations in this regard. Thanks in advance.

    To get a better idea of the DCs' config, let's see an unedited ipconfig /all from the DCs, please.
    Is there are third party AV on the DCs?
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi,
    I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
    But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
    Regards,
    Arminder Singh

  • TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

    my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
    I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

    This is what it says about error 2006
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Maybe you are looking for