Performance Appraisal documents display on portal

Hi All
I am working on PMS in EHP 6 environment. We have implemented column layout configuration for documents. My query is in the attached screen shot , how can we reduce the blank space between two columns. Also , is there any way to increase the width of note box so as to map with the full screen.
In the screen shot attached , the note box are also not coming in the sync , how can we arrange all the notebox and dropdown in symmetric way.
please guide
Thanks

Hi,
Please refer below link.
http://scn.sap.com/docs/DOC-53289
We have done changes in standard layout for leave. The same way you can change for PMS.
It is just for reference.
Thanks,
Ketul Patel

Similar Messages

  • Appraisal Document in the portal ESS

    Dear Experts.
    We have the following issue.
    The consultant of HR created a Appraisal Document and Realase it for display in the portal. The problem is that the Appraisal Document not is displayed in the portal. The system not is update this. And display the previus Appraisal Document.
    Regards

    Hi.
    The system not display none error.
    The Scenar is the following:
    We created an appraisal doc in the R/3 and assigned the chief as the appraiser, but when the chief logs in to portal he can't see the document.
    [Image|http://www.freeimagehosting.net/uploads/667f92a01b.jpg]
    I checked that my user have the  auth object P_HAP_DOC and yes.
    What status should have the appraisal docum for that an employee in the ESS can display?
    Regards
    Edited by: consultor_ess_mss on Aug 13, 2010 9:02 PM

  • KM Document display on Portal

    Hi All,
    i uploaded a document under Content Administration->KM Content->root->documents->public documents->xyz.doc.
    what is to be done in order to display this document in an iView. what KM iView need to be used for this purpose.
    Regards,
    Kavitha

    Crispine,
    That should be working fine once you assign the path to document.
    It is working fine for me. Is this the case for all docs ?
    Pls try checking with some other documnet in KM content.
    Alternately try  assigning that iview to a role and that role to your user id.
    Let us know how this works out .
    Regards
    Vineeth

  • Performance Appraisal Document final rating

    All Expert:
    The appraisal Form will has a final  appraisal rate. how to exacter the final rating in the Appraisal Form, which FM can be use?
    and how to distinguish the zero and blank final rating? I want to distinguish them. Can any one can help me? Thank you.

    Hi Kevin
    Assuming that your are using Objective Settings and Appraisals component,  you may explore if FM HRHAP_PA_ECM_PERFORMANCE_GET can be executed in transaction SE37 to compute appraisal result.
    Mandatory input parameters are staff number, start date of appraisal, end date of appraisal and appraisal template object number.
    Thanks,
    Gregg

  • ESS Appraisal Document Adobe Print Error

    Hi,
    we are in the midst of upgrading our system from 4.7 to ECC6. We have noticed that once upgraded, we are getting error when we try to print the performance management document. In Portal, once we clicked on the appraisal document, we click on the print function. Next, we click on 'open'. we get the following message:-
    "Adobe reader could not open webforms.pdf because it is either not a supported filetype or because the file has been damaged"
    Any idea why? Is it an Acrobat issue rather then a SAP issue? 
    Thanks

    Hi,
    Check the details .....
    Check the ADS connection "SM59".....with Basis People
    Also check the ADOBI Version that you have using ....
    The Acrobat version should be latest one.

  • Problem in Appraisal Document, in ESS

    hi all,
    we are getting problem in Appraisal document in career and job service in Employee self service.
    when we give the Administration Role to Ess user at portal level i am able to see the appraisal document but when we trying to see the document window is opening with page not found.
    if we delete the administrator role at portal side for the Ess user i am not able to see any appraisal document that i am getting the Error
         Appraisal Documents (WD UI)  
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 11:51_08/01/11_0395_9581350
    Refer to the log file for details about this exception.
    i added Everyone default Group also.
    Wiating for your Reply.
    Still getting the problem.
    Thankyou
    swapna

    hi
    Check 1. Permission of roles  2. Security zone permissions
    administrator user will not work as it will be SSO, create proper test user in Portal and R/3 both, and then check whether it is working or not, still if any issue please reply.
    -Yogesh

  • Part appraisal document for self and subordinates

    Hi All
    I have created a part appraisal document , for self and sub ordinates. When I logged in to portal , the subordinates are able to view the document whereas document created for self are unable to. For self as well as for subordinates , we have configured the document in ESS only. It may be due to some powl query issue but am unable to identify if its powl issue or some authorization issue,In either case , how to identify the same. Please suggest.
    Thanks
    Smriti

    Hello Smriti,
    Can you clarify the issue for me - you have created one appraisal document and in the header data have defined the part appraisers as the employee and subordinates, and only the employee is unable to access the part appraisal document?
    When you created the appraisal template, on the 'Roles' tab, is the role for 'Self' ticked?
    Can the employee access any of his other appraisal documents from the portal?
    Is IT0105 data maintained for the employee's SY-UNAME?
    Regards,
    Kendall

  • Pushbutton not shown in appraisal document

    Hi,
    I have assigned relevant roles for employee and manager. when I assign the appraisal document to employee / manager, they are not able to see pushbuttons in appraisal document.  But if I assign SAP_ALL profile along with those roles, employee / manager is able to see push buttons in appraisal document.
    This is looking like authorization / Roles issue. Kindly assist me in this regard.
    Thanks and Regards,
    Harish

    Hi Harish,
    Please see if below link helps,
    Push buttons not appearing on the Predefined appraisal document on MSS portal (EHP4)
    There are many other threads for same issue with different solutions. May be any of those be helpful.
    Regards,
    Supriya

  • Performance management for appraisal document Targets defaulting...

    Hi,
       My question is about custom badi implementation in Performance management for appraisal document Targets defaulting...
    Brief:
    ====
    At the creation of the personal appraisal, the column containing the performance targets of the employee is pre filled with the targets defined in the previous appraisal cycle and contained in the previous year employee appraisal form or in the target settings document.
    Solution:
          1   Please give me the soultion which badi i can use?
             and How to achieve to do this thru coding step by step?
          2. And Can you please share any other synario defaulting   developed previously.If u share these documents or coding .. It should be fine...
    Help me to do fastly ..
    waiting for asap response..
    Thanks and Regards
    Mohan.P

    Hi Chris,
    This component must be deployed in Portal because have a lot of services which need ESS in order to work properly. According with note 1408243 you must add those business components in your iView and only are available in that component. Once you deploy this component you do not need to assign any special role to users. The business object component is in Content Administration --> Portal Content --> Business Object --> ERP Common Parts --> Human Resources --> Employee.
    Follow this link:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
    And get rid of mismatch issues!!!!
    Regards.
    David Cortés
    Edited by: David Cortes on Apr 22, 2010 11:53 PM

  • Shortdump while accessing Appraisal document in portal-Null obj ref.not pos

    Hi all,
    We are implementing Performance Management in Ehp4 with EP 7.1, flexible template   We have been facing an issue where in Portal while we are trying to click on Appraisal document either in ESS or MSS, it dos not open anything instead we are getting
    short dump error in ST22.  We have performed the portal and ESS setup as per the SAP recommended  notes.
    1272076 - Appraisal Nav
    1408243 - OBN
    1416756 - OBN Confi
    1463821 - Portal confi
    1458466 - Launchpad config
    The short dump error analysis as follows.
    Short text
        Access via 'NULL' object reference not possible.
      An exception occurred that is explained in detail below.
      The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
       caught in
      procedure "READ_ATTR_ALL_FOR_CASETYP" "(METHOD)", nor was it propagated by a
       RAISING clause.
      Since the caller of the procedure could not have anticipated that the
      exception would occur, the current program is terminated.
      The reason for the exception is:
      You attempted to use a 'NULL' object reference (points to 'nothing')
      access a component (variable: "LO_CASE_CUST").
      An object reference must point to an object (an instance of a class)
      before it can be used to access components.
      Either the reference was never set or it was set to 'NULL' using the
      CLEAR statement.
    Just wondering if any one of you came across this issue.  I have put external break point at  main appraisal component
    HAP_MAIN_DOCUMENT and class CL_HAP_WD_DOCUMENT_UI. But it didn't go through. I think because this abap dynpro not being called due to url issue and thus dump says null pointer exception.
    Appreciate your response and I Look forward your insights.
    Prav

    << Do not post the same question across a number of forums >>

  • Appraisal document header not showing up in the Portal

    when I look at the appraisal document in Portal ESS MSS (using WD4A application Appraisal Document) the header of the appraisal document does not show up (in PHAP_ADMIN it does).
    how can I show the appraisal document header in the Portal?
    regards,
    Tiberiu

    >
    Chris Thomas wrote:
    > Do you know how to set the template such that the Header is expanded (displayed) by default ?
    >
    > Chris
    hi chris, that would almost definitely only be available by doing a webdynpro enhancement to hap_main_document.

  • Error on Flexible Performance Management Appraisal Document

    Hello Experts,
    We are in the process of building Performance Management using Enhancement Package 4 in ECC 6.0. I am having issues with getting the Appraisal Document to work for MSS. Just to clarify too, I have no experience with Performance Management and the fact that we are using Enhancement package 4, our Functional consultants are not sure what to expect either. One more thing, the SICF service is activated.
    *) When trying to preview the Appraisal Document (com.sap.pct.erp.mss.hap_document), I am receiving a Portal Run Time error.
    *) When I go into SE80, I am using Package u2018PAOC_HAP_DOCUMENT_WD_UIu2019 to run a test on Web Dynpro Application HAP_MAIN_DOCUMENT, I am receiving u2018Access via 'NULL' object reference not possible.u2019
    *) When I go into SE80, I am using Package u2018PAOC_HAP_DOCUMENT_WD_UIu2019 to run a test on Web Dynpro Configuration HAP_AC_MAIN_DOC, I am receiving u201Cu2018Error in Calling Up Applicationu2019 The Web Dynpro application was called up with the wrong URL parametersu201D.
    QUESTIONS:
    1) Do I have to implement Generic Performance Management (com.sap.pct.erp.mss.14.generic_performance_management) to call the appraisal document?
    2) Is there any special configuration that needs to be done to make the HAP_MAIN_DOC work (portal or R/3)?
    3) Do I need to manually create an SICF service for this?
    4) Is there any documentation on how to implement the Flexible?
    Any direction would be appreciated.
    Thank you,
    Mike

    Hello H2R,
    I copied the Iview Generic Performance Management (com.sap.pct.erp.mss.14.generic_performance_management) with Application Name 'HAP_START_PAGE_POWL_UI_MSS' and the Application Configuration Name 'HAP_START_PG_POW_MSS_AC'.
    Activated the SICF services of 'hap_main_document', 'HAP_START_PG_POW_MSS_AC', 'HAP_START_PAGE_POWL_UI_MSS. Also, I would activate the services that begin with 'HAP' that l thought that I would need.
    In SE80, there are 2 locations to find these Applications: 1) Web Dynpro Comp./Intf. = FPM_OIF_COMPONENT and 2) Package = PAOC_HAP_DOCUMENT_WD_UI.
    As for the notes, we are on SAPK-60420INEAHRGXX, these are the notes that we applied:
    1468466 - PM Launchpad Config
    1463821 - PM Portal Config
    1416756 - OBN Config in PM
    1408243 - Config for OBN
    Hope this helps,
    Mike

  • Appraisal Document Error in ERP6 EHP6 and Portal 7.3

    Dear All,
    I am on ECC6 EHP6 and Portal 7.3 and using WDA ESS and MSS business packages. I have gone through all the below notes:
    1600380 - Appraisal Document does not open in portal
    1468466 Performance Management Launchpad Configuration
    1463821 Performance Management Portal Configuration
    1416756 OBN Configuration in Performance Management
    1408243 Configuration for object-based navigation
    But since I an using Webdynpro ABAP package for ESS I dont have the below path in Portal:
    portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.14.bp_folder/com.sap.pct.erp.ess.14.pages/com.sap.pct.erp.ess.14.career_job
    I am getting the attached error while accessing Appraisal Document in Portal. Also when checked in SE80 its giving the same error.
    Kindly help.
    Thank you,
    Regards,
    Disha.

    Hello disha,
    This issue (Error in Calling Up Application) is a common issue and SAP Note 1600380 was created to address this.
    1) Keep in mind your custom environment, please pay attention to the following comment in the Note:
      "Note: this document has been created based on standard ESS and MSS roles. If you have copied the standard content to customer specific roles you will have to adapt them accordingly."
    2) Remember to test each role independently, this is because OBN will resolve with the first available navigation found:
      "Recommendations: in order to set up the navigation it is better that  you first solve it independently for each role. So first just assign the ESS role to your user and Content Administration role. Once it is working, proceed with MSS role (in that case remove ESS role and
      assign MSS plus Content Admin)."
    3) After checking all the customizing, please pay special attention to the "further checks" section:
       3.1)
       "Check note 1352104 - OBN action's Business Parameters don't  reach AI' is implemented. This note corrects an issue with parameters not correctly passed in POST."
       In order to check this, go through your ComponentInfo Page and check  the version of your EP-PSERV component. For instance:
    EP-PSERV  7.01 SP3 (1000.7.01.3.1.20090302142421)
    This is the patch level:        ^
    So, in this case you would have:
    EP-PSERV: 7.01
    SP: 3
    Patch level: 1
    The problem for the non-working OBN link, could be a mixed protoco between the portal and the WDA backend system (WebAs). The Object Based Navigation framework, among other things, is based on Java Script, hence it needs that the portal and backend will have the same protocol and the same domain. Please check note 945516 -  Web Dynpro ABA in a portal environment.

  • How to set a performance appraisal doc to approved status in portal

    Hi,
    I'm trying to create a new appraisal document where once the document is marked 'complete' it is then allowed to be marked approved.  I have configured the status flow tab to allow the pushbutton "approve" with a target status of "approved" to be used from the status of "completed".  I have even set the person authorized field to "all users" for my testing.  From the BSP pages on the portal I can mark the document complete as the appraiser, but then when the "approve" pushbutton appears it is all greyed out.  I currently have it set to 'save and display' to see that.  If I use 'save and exit' it is even removing the document from the TODO page for the appraiser.
    Does anyone have a suggestion on how to allow the appraiser to use this status button in portal?  If I log-in as the appraiser in the GUI they do however have the approve button on phap_admin_pa.

    Hi,
    I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
    In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
    Cheers,
    Dion

  • Multiple Appraisal Documents via Status Overview Portal iView

    Good evening experts,
    We have encountered an issue on our system using both custom BSP and standard SAP Delivered BSP for Performance Management (HAP_DOCUMENT).
    Logon via Manager self service, then select the link to maintain performance documents to open the Status Overview iView (you can view all directly subordinate employees and links to appraisal documents).
    If you select to open two, three, four appraisal documents from the list and have them open simultaneously, we are having an issue for when the manager selects "save" on one of the documents, the header data will all of a sudden display the same appraisee name across all of the open documents.  The data becomes corrupt, and data does not properly save.
    Have any of you encountered this issue before when you have multiple appraisal documents open at the same time?
    Thanks,
    Adam

    Hi
    I guess it happens due to the session of a particular page not expiring , try to delete the cookies from the system and try once more,
    Else you may report a bug to SAP.
    Regards
    Sameer

Maybe you are looking for