Performance Appraisal-Issue with Restrcited template

Hello
I am trying to prepare appraisal document via tcode PHAP_PREPARE_PA. The system proposes three options:
- Prepare Appraisal Docs with Template, Appraiser, Appraisee
- Prepare Appraisal Docs with Organizational Units
- Prepare Appraisal Docs with Restricted Templates
Questions:
Q1 What is the difference between 2 and 3 above?
Q2 Is there any documentation that explains each option in detail?
Q3 Is there a place where we configure the evaluation path each option takes?
Q4 When I use the option "Prepare Appraisal Docs with Restricted Templates" and select the org unit/appraisal template, I get the following message:
Object 01 VA 99912314 not found
Message no. HRHAP00_TEMPLATE007
What am I missing? Your timely assistance would be immensely helpful.
Many thanks in advance,

Q 1 & Q 2 :
From SAP Help -
Prepare appraisal documents using wizard (Template,Appraiser, Appraisee)
The wizard enables you to prepare appraisal documents for different appraiser/appraisee combinations (such as manager appraises employee).
1.      Call the Prepare Appraisal Documents transaction.
2.      Click on the Prepare Appraisal Documents with Template, Apper, Appee link.
3.      The wizard is started and it guides you through all the steps you need to prepare appraisal documents with the appropriate appraiser/appraisee combinations.
Prepare appraisal documents using organizational units
This link enables you to prepare appraisal documents using your organizational units.
1.      Click on the Prepare Appraisal Documents Using Organizational Units link.
2.      In the Root Object ID field, choose an organizational unit from input help and transfer it.
3.      In the Appraisal Template field, choose the appraisal template you want to use from input help.
4.      Enter a start and end date for the validity period.
5.      Select the Test Run checkbox if you want to create appraisal documents in test mode. In this case, no appraisal documents are created in the database.
6.      Choose Execute.
Prepare appraisal documents with restricted templates
This link provides you with the following options:
¡        You can restrict the selection of appraisal templates to include particular employee groups only
If it is known for which employees appraisal documents are to be prepared, you can use an employee attribute such as an employee's Job to restrict the number of appraisal templates offered for selection.
¡        You can restrict the selection of employees depending on the appraisal template.
If it is not known for which employee the appraisal document is to be prepared, the appraisal template is offered first. Input help restricts the employees available for selection to include only those employees who, on account of their employee attributes, can be considered for the appraisal template.
       1.      Click on the Prepare Appraisal Documents Using Restricted Templates link.
       2.      Select the required organizational unit from input help for the Root Object field. Transfer this organizational unit.
       3.      Select the appraisal template you require.
       4.      Enter a validity period.
       5.      Select the Test Run checkbox if you want to create appraisal documents in test mode. In this case, no appraisal documents are created in the database.
       6.      Choose Execute.
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/98/1222d3404e3849912015524dce03e5/frameset.htm
Reward points if this helps.
Sanghamitra

Similar Messages

  • Performance Appraisal-Issue with BADI HRHAP00_COL_ACCESS

    Hello
    The requirement: For a given year, say 01/01/2007 to 12/31/2007, if an EE has a value 01 in a field on IT0001, then show the column X else do not show the column.
    By implementing the BADI, we are now able to control the access to the column, but it seems that the BADI is checking the value of the field as of the system date and then showing/hiding the column. We would like the BADI to check for the value for any time between 01/01/2007 to 12/31/2007, irrespective of the system date. The ABAP person working on the BADI is not able to check for the dates in the BADI. Can you please assist and advice on what can be done in this regard.
    Many thanks in advance.

    Hi,
    Ask your ABAPer to code like this.
    He must be using a select query to get the 0001 infotype data or a FM.
    If its a select query then
    code for the begda and endda like this.
                     AND ( ( BEGDA <= V_BEGDA AND ENDDA >= V_BEGDA )
                     OR
                     ( BEGDA <= V_ENDDA AND ENDDA >= V_ENDDA ) ).
    here your V_BEGDA is 01.01.2007 and V_ENDDA is 31.12.2007.
    Hope this helps you.
    Regards,
    Subbu.

  • 163;  There seems to be an issue with the template that the site is using as there is a code to replace the pricing.

    163;
    There seems to be an issue with the template that the site is using as there is a code to replace the pricing.
    <script>
    // Script to extract the currency and decimals from the price
    var price = "{tag_saleprice}";
    var priceWithoutCurrency = price.replace( /^\D+/g, '')
    var decimals = priceWithoutCurrency.substring(priceWithoutCurrency.length - 2, priceWithoutCurrency.length);
    var roundedPrice = priceWithoutCurrency.substring(0, priceWithoutCurrency.length - 3);
    $('.image-with-price.big span').html(roundedPrice+'<sup>'+decimals+'</sup>');

    Here are the screenshots for what it's worth.
    Not sure why I can't post them in the original post.<br>
    <sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
    '''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
    IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
    I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
    '''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

  • Issues With PDF Template Mapping

    Hi all,
    Oracle BI Publisher for Windows 10.1.3.2.1
    Oracle Publisher Desktop 10.1.3.2.1
    Adobe Acrobat 5.0.5
    Broswer IE 6.0.29
    I have created a report based on a single database table (DEMO.PRODUCTS) but am experiencing problems when I try and map the form fields in PDF Template to my sample XML file.
    I created a PDF Template and uploaded this template to my Layout. This PDF Template has two form fields on it (PRODUCTNAME and UNITPRICE, which incidentally are the names of the database columns I want them to map to).
    I have also uploaded my sample XML data file and therefore have access to the Map Form Fields button on my report definition. However, when I click on the button a new window opens with the Map PDF Form Fields and a dialog to "Click on each highlighted...." and then hangs. When I close the window I receive a message about an Adobe Acrobat error.
    If I try and do the same thing in Firefox then I receive a message in the JavaScript Console:
    Acrobat Database Connectivity Built-in Functions Version 5.0
    Acrobat EScript Built-in Functions Version 5.0
    Acrobat Annotations / Collaboration Built-in Functions Version 5.0
    TypeError: app.execDialog is not a function opened this in Adobe Acrobat
    Any suggestions or comments appreciated.
    Many thanks,
    Gary.

    Hi Aashish,
    I suggest you to check the RTF Template of your report ....as if your xml output file on submit request form--->diagnostic --->view xml ...is generated ... it means that your data defination file is perfectly fine but there is issue with your rtf template....may be some of grouping or tag is not put properly...
    one thing i want to suggest you to pls save that data file as .xml extension and upload in rtf u designed on youe desktop.... check theprview if its coming fine or not.
    let me know if u still facing the same problem.
    regards
    Ratnesh P

  • Issue with Report Template in EHS

    Hi Gurus
    I have an issue wiht report template in EHS. When i go to CG42 i tried to search for a report template no entries found. But if you F4 in template field there are templates getting displayed. If i select template and enter again, it says no object available. Looks like weird. Template is very well available in system. If you have this issue please guide me to correct the situation. Also can you please let us know what is the table to check report templates.
    Regards
    Murali

    Hi Murali,
    with TC code - CG34, u may further try the following path -
    File with path -  Character standard
    <path on application server>:\BP_PH_EHS_MSDS.DAT     MS-NT
    <path on application server>:\BP_PH_EHS_COVERL.DAT     MS-NT
    Choose Check File (F5). The transfer file area is filled with data.
    Choose Start/Transfer time (F6). The symbol match up is displayed.
    On the Import Report Template: Symbol Matchup screen choose again Start/Transfer time. MS Word for Windows is started with the template.
    Choose Check Template. upcoming warning messages may be Ignored.
    hope the issue is solved.
    with regards,
    mahesh

  • Weird issue with Site Template in O365

    Hi,
    I ran into a weird issue while working with Site Template in O365 last night.
    I created a sub-site in a Site Collection with some Site Columns, CT and Lists. Then I saved it as a Site Template so that it can be used for different sites. Then I created 3 different sub-sites using the template. All went good.
    After some time when I looked at the sites, something really irritating happened. I saw the first two sites were missing all the site columns and CT. And the latest third site had 3 copies of each Site Column and CT.  Though for the first two sites,
    all the CT, Site Columns were available at List level, but it wad just the reference. The Actual CT was not seen the site settings.
    This is the first time I saw this kind of issue. Not sure what is the reason for this.
    Any idea around this ?
    Thanks,
    Nutan
    Nutan Sharma

    Hi,
    According to your description, my understanding is that the error occurred when you created a site from the template with no files in the document library.
    I tested the same scenario per your post, and I can create a site from the template with no files in the document library with no errors.
    To solve this issue, I recommend to verify the things below:
    Did you save the site as a template with Include Content checked? If yes, I recommend to test if it works when saving the site as a template with Include Content unchecked.
    Test the same scenario with a new site to narrow the issue scope.
    I also recommend to check the event log and ULS log to see if anything unexpected occurred.
    To check event log, click the Start button and type “Event Viewer” in the Search box.
    For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
    You can check the ULS log by the methods here:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Issue with room template before going Live

    We have created a template and all the users get their own room. In couple of months we are planning to add new features to the app. Of course when we update the template, the rooms won't get updated with new nodes. How do we upgrade these existing rooms? Delete and recreate the room using a batch script? I guess we will look the data in the room but is there any other potential issues with this approach. Any better approach?
    One thought came to my mind is to furnish the template with all possible component nodes beforehand even if we do not use it right now. That way in future, we will have all the components we need in existing rooms. Is this feasible , better approach?

    Option 1: delete and recreate the room. If you don't save any state or the state can be recreated there shouldn't be any issues with this approach.
    Option 2: write a flex application that updates the room, or make your updated flex client update the room (but if you are creating new nodes and you don't have a role of 100 that would not work)
    Option 3: create the new nodes and configuration from a server side script.
    Sent from my iPhone

  • Issue with Workflow template versions? Can any one suggest what to do.

    Hello All.
    Actually in quality system there is a workflow instance in error. I identified the error and fixed the issue with a new development and transported to quality. Now when i restart the error instance in quality, its not picking the latest template with additional steps i developed, instead, it is catching the older version.
    For a fresh instance, my newer version of workflow is getting triggered, why not for error workflow.
    I used swu_obuf to synchronize the buffer but no use. What could be the resolution.
    Please suggest.
    Regards
    Prasad.

    Hi Prasad
    Running instances / Waiting / Or in error continue to run in the version in which they were started.
    That is why Version increments in QA / PRD when you move a change... so that any running, waiting, error instance can pick the same version of the workflow.
    It will not pickup your changed version. Logically it would be incorrect - start in Version A and end in Version B..... say start in version which "Auto Approves" a PO of value INR <=100 .... error .... restart in a changed version which now had auto approve limit of INR 1000. The PO will not be auto approved whereas the day it was started, the limit was only 100. So it makes sense to restart a workflow in the same version in which it was started. That is how the architecture has been designed.
    To conclude, if the steps which went in error because of the data from your previous step (which you have changed now) - see if you can change the container data and restart the WI from SWIA so that the work item starts with a new set of data. Else, discuss with business owners to cancel these workflows and restart new ones.
    regards,
    Modak

  • Issues with one template

    Hello
    I'm having issues with Particle Impacts template - when I render video, it has like green lines like letter X all over the screen , like on the picture below
    http://i56.tinypic.com/bjed52.jpg
    How can I remove them? Thanks in advance

    Thanks a lot.
    I installed Video Copilot, Trapcode Particular and Cycore FX.It must be one of those.
    What you think which one it might be?

  • Issue with nested templates, CS6

    About the same time that I upgraded to CS6 my customer wanted to completely redesign their website and now I am having trouble with nested templates not updating pages.
    I have my main template that has the site wide banner and horizontal menu, then I have other templates based on the original that have different verticle menu bars on the left.  B/C I wanted to be able to make different menu bars I had to put in an editable region.  NOW I am reading that the reason my nested template isn't updating is b/c the info in an editable region.
    In my last version of Dreamweaver I used some kind of code that included "@@" (can't remember the exact code off the top of my head but when I tried putting that in the new site I was told it was "unacceptable" or something like that.
    Can someone give me a clue here?  When I make updates to "subtemplate" it ask me if I want to update files, I say yes, it shows me all the files that are linked to that template but doesn't update them.
    Thanks,
    Carol

    Is this the code you're looking for?:
    @@(<samp class="codeph">"</samp><samp class="codeph">")</samp>@@
    More info can be found here: http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7aa1a.h tml#WScbb6b82af5544594822510a94ae8d65-7a9ea

  • Issue with style templates & sectioned reports in BI Publisher

    Hello everyone,
    while building a report in BIP 11.1.1.6 I've encountered the next problem. I'm using a style template with defined header & footer, and the layout rtf template supposed to contain several sections (e.g., for 'No Data Found' message). The problem is that whenever I add sections to the report, the header & footer are applied only to the last one — no matter how many sections are there.
    I've looked through the xdo debugging logs and I still see no reason for the <region-header> & <region-footer> not to apply to all of the sections.
    Can anyone help me with this issue?

    Hi Kishore,
    I have a similiar request. We do not have LDAP enabled yet. I configured & linked OBIEE with BIP. I put a BIP report in one of our Dashboard pages.
    When logged in as Administrator / or the user who has admin rights, I could see the BIP report in dashboard but any other users can not view the report. Can you please share the doc you have with me and it might be useful.
    My mail id is - [email protected]
    Many Thanks
    Mahesh

  • Issue with site template that contains a document library with a lookup column to another list

    I have a document library called Proposals with a lookup column in the same site called Document Categories (multiple values allowed).  It points to a list called document categories.  I have several sample documents in the Proposal Library that
    contain valid document categories.  When I save the site as a template and instantiate it, everything is fine.  However, when I remove the sample documents from the Proposal library and rebuild the site template, I can't get the  template to
    create another site.  I get an error Unable To Open Lookup List.
    I don't understand why I can instantiate a site from the template when there's sample data, but not when the document library containing the lookup column is empty.
    Does SharePoint 2010 site template support lookup columns?
    Why would it make a difference if the library is empty?
    Thanks

    Hi,
    According to your description, my understanding is that the error occurred when you created a site from the template with no files in the document library.
    I tested the same scenario per your post, and I can create a site from the template with no files in the document library with no errors.
    To solve this issue, I recommend to verify the things below:
    Did you save the site as a template with Include Content checked? If yes, I recommend to test if it works when saving the site as a template with Include Content unchecked.
    Test the same scenario with a new site to narrow the issue scope.
    I also recommend to check the event log and ULS log to see if anything unexpected occurred.
    To check event log, click the Start button and type “Event Viewer” in the Search box.
    For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
    You can check the ULS log by the methods here:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Performance / stability issues with BDB 3.3.62 while checkpointing

    Hi,
    first of all: we use BDB 3.2 for more than a year within our application and we never had any performance or stability issues. Now we are about to release a new version of our software with BDB 3.3 and we found some problems during our release tests.
    This is the situation: we have implemented some cleanup routines that make very heavy use of the BDB environment. The common usage pattern is to scan the database (about 300GB with >> 100 million items) and than delete a lot of items from the database. The first versions of our cleanup routine worked without any problem but during performance tuning of our code we suddenly and reproducible encountered segmentation faults in the com.sleepycat.je.recovery.Checkpointer thread. We analysed more that 10 VM crashes and ALL crashes were related to Checkpointer thread. (Linux 64 bit, JDK 1.5.0_013 / 1.6.0_06)
    After we removed our performance tuning (only application logic – nothing BDB-related) the VM crashes disappeared – so it looks like some kind of problem which only occurs under high load conditions. Next thing we tried was enabling our performance tuning and setting Ceckpointer configuration to default (write a checkpoint after 20MB) before that we used time based checkpointing with 60 sec interval.
    With Default Checkpointer configuration there were no VM-crashes but performance was very slow!
    Finally my question: What Checkpointer configuration would you recommend for an environment that is under very high load with regard to delete operations? Would you recommend using “high priority Checkpointing”? Would you recommend time- or data-based checkpointing?
    It looks like Checkpointing every 60 seconds was not a good idea but 20MB seems to be too slow.
    This leads to another question: What does a longer Checkpointing interval mean for recovery time? Does recovery take substantially longer if checkpointing is done less fequently?
    Any help would be very much apprechiated.
    Here are two HS_ERR_PID
    # An unexpected error has been detected by Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0x00002af3cbe47a27, pid=29834, tid=1170757984
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (10.0-b23 mixed mode linux-amd64)
    # Problematic frame:
    # V [libjvm.so+0x5d8a27]
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    --------------- T H R E A D ---------------
    Current thread (0x00002aad7cd06800): JavaThread "Checkpointer" daemon [_thread_in_vm, id=30798, stack(0x0000000045b85000,0x0000000045c86000)]
    siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x0000000000000010
    Registers:
    RAX=0x00002aad7c942d80, RBX=0x00002aad7cd06800, RCX=0x00002aad7c943168, RDX=0x00002aad7c942d90
    RSP=0x0000000045c84720, RBP=0x0000000045c84730, RSI=0x00002aabf193e230, RDI=0x0000000000000000
    R8 =0x00002aad7dcf4380, R9 =0x000000000000784e, R10=0x00002af3cbb8e840, R11=0x0000000045c84810
    R12=0x0000000000000000, R13=0x0000000045c84780, R14=0x0000000045c84838, R15=0x00002aad7cd06800
    RIP=0x00002af3cbe47a27, EFL=0x0000000000010206, CSGSFS=0x0000000000000033, ERR=0x0000000000000004
    TRAPNO=0x000000000000000e
    Top of Stack: (sp=0x0000000045c84720)
    0x0000000045c84720: 00002aad7cd06800 0000000000000000
    0x0000000045c84730: 0000000045c84740 00002af3cbce3a9d
    0x0000000045c84740: 0000000045c847b0 00002af3cbb8e896
    0x0000000045c84750: 00002aad7dcf4380 00002aad7c942d80
    0x0000000045c84760: 00002aad7c942d90 00002aad7c943168
    0x0000000045c84770: 00002aad7cd06800 00002aad7cd06800
    0x0000000045c84780: 00002aad7cd06800 0000000000000000
    0x0000000045c84790: 000000002f7e8112 00002aabf193e1f9
    0x0000000045c847a0: 0000000000000000 00002aad5fede569
    0x0000000045c847b0: 0000000045c84810 00002aaaab25a0c7
    0x0000000045c847c0: 00002aaaab253070 00002aaaab25a08b
    0x0000000045c847d0: 0000000045c847d0 00002aad5fede569
    0x0000000045c847e0: 0000000045c84838 00002aad5fedef50
    0x0000000045c847f0: 00002aad601fedc0 00002aad5fede5b0
    0x0000000045c84800: 0000000000000000 0000000045c84840
    0x0000000045c84810: 0000000000010001 00002aaaab854744
    0x0000000045c84820: 0000000000000000 0000000000000000
    0x0000000045c84830: 0000000000000000 0000000000000000
    0x0000000045c84840: 00002aad7cd06800 00002aaacd77a138
    0x0000000045c84850: 00002aaaf27a8c90 00002aac00000001
    0x0000000045c84860: 00002aaa00000000 00002af3cbd73369
    0x0000000045c84870: 0000000145c848b0 000000002f7e8112
    0x0000000045c84880: 00002aad7cd06800 00002aaaf39de2f0
    0x0000000045c84890: 00002aabbee886d0 00002aab35552900
    0x0000000045c848a0: 00002aaacd77a3c8 00002aaaf573a448
    0x0000000045c848b0: 00002aaaee5aaab8 00002aaacd77a160
    0x0000000045c848c0: 00002aab355887f0 00002aaaee643748
    0x0000000045c848d0: 00002aaacd77a160 00002aac6a858558
    0x0000000045c848e0: 0000000000000000 00002aaacd77a380
    0x0000000045c848f0: 00002aad0000005b 0000000000000001
    0x0000000045c84900: 0000000000000001 00002aaacd779328
    0x0000000045c84910: 00002aabad0b62d8 00002aaaab7589c0
    Instructions: (pc=0x00002af3cbe47a27)
    0x00002af3cbe47a17: 89 f0 eb ea 90 66 66 66 90 55 48 89 e5 41 54 53
    0x00002af3cbe47a27: 0f b7 57 10 48 89 fb 44 8d 62 01 49 63 fc e8 06
    Stack: [0x0000000045b85000,0x0000000045c86000], sp=0x0000000045c84720, free space=1021k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V [libjvm.so+0x5d8a27]
    V [libjvm.so+0x474a9d]
    V [libjvm.so+0x31f896]
    v ~BufferBlob::Interpreter
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    v ~BufferBlob::Interpreter
    J com.sleepycat.je.recovery.Checkpointer.flushIN(Lcom/sleepycat/je/dbi/EnvironmentImpl;Lcom/sleepycat/je/dbi/DatabaseImpl;
    Lcom/sleepycat/je/log/LogManager;Lcom/sleepycat/je/recovery/Checkpointer$CheckpointReference;Lcom/sleepycat/je/recovery/DirtyINMap;IIZJZLcom/sleepycat/je/recovery/Checkpointer$FlushStats;
    Lcom/sleepycat/je/cleaner/LocalUtilizationTracker;Z)V
    J com.sleepycat.je.recovery.Checkpointer.flushDirtyNodes(Lcom/sleepycat/je/dbi/EnvironmentImpl;Lcom/sleepycat/je/recovery/DirtyINMap;
    Ljava/util/Map;ZJZLcom/sleepycat/je/recovery/Checkpointer$FlushStats;)V
    v ~BufferBlob::Interpreter
    v ~BufferBlob::Interpreter
    v ~BufferBlob::Interpreter
    v ~BufferBlob::Interpreter
    v ~BufferBlob::StubRoutines (1)
    # An unexpected error has been detected by Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0x00002b00816f2a27, pid=32743, tid=1162336608
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (10.0-b23 mixed mode linux-amd64)
    # Problematic frame:
    # V [libjvm.so+0x5d8a27]
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    --------------- T H R E A D ---------------
    Current thread (0x00002aad7fa1c000): JavaThread "Checkpointer" daemon [_thread_in_vm, id=32646, stack(0x000000004537d000,0x000000004547e000)]
    siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x0000000000000010
    Registers:
    RAX=0x00002aad8082f9b0, RBX=0x00002aad7fa1c000, RCX=0x00002aad8082fd98, RDX=0x00002aad8082f9c0
    RSP=0x000000004547c5e0, RBP=0x000000004547c5f0, RSI=0x00002aab73edc788, RDI=0x0000000000000000
    R8 =0x00002aad7fa08d30, R9 =0x0000000000007f86, R10=0x00002b0081439840, R11=0x000000004547c6d0
    R12=0x00002aaca950fcc8, R13=0x000000004547c640, R14=0x000000004547c6f8, R15=0x00002aad7fa1c000
    RIP=0x00002b00816f2a27, EFL=0x0000000000010202, CSGSFS=0x0000000000000033, ERR=0x0000000000000004
    TRAPNO=0x000000000000000e
    Top of Stack: (sp=0x000000004547c5e0)
    0x000000004547c5e0: 00002aad7fa1c000 00002aaca950fcc8
    0x000000004547c5f0: 000000004547c600 00002b008158ea9d
    0x000000004547c600: 000000004547c670 00002b0081439896
    0x000000004547c610: 00002aad7fa08d30 00002aad8082f9b0
    0x000000004547c620: 00002aad8082f9c0 00002aad8082fd98
    0x000000004547c630: 00002aad7fa1c000 00002aad7fa1c000
    0x000000004547c640: 00002aad7fa1c000 00002aaca950fcc8
    0x000000004547c650: 000000004547c540 00002aab73edc751
    0x000000004547c660: 00002aaca950fcc8 00002aad5fef5d49
    0x000000004547c670: 000000004547c6d0 00002aaaab25a0c7
    0x000000004547c680: 00002aaaab253070 00002aaaab25a08b
    0x000000004547c690: 000000004547c690 00002aad5fef5d49
    0x000000004547c6a0: 000000004547c6f8 00002aad5fef6730
    0x000000004547c6b0: 00002aad600eed48 00002aad5fef5d90
    0x000000004547c6c0: 0000000000000000 000000004547c700
    0x000000004547c6d0: 0000000000010001 00002aaaaba46ac0
    0x000000004547c6e0: 0000000000000000 0000000000000000
    0x000000004547c6f0: 0000000000000000 0000000000000000
    0x000000004547c700: 0001000100010005 00002aaa00000001
    0x000000004547c710: 0010244e00432762 00002aab2ef43ff0
    0x000000004547c720: 00002aaaf0635a00 00002aac5694a460
    0x000000004547c730: 0000000100000000 00002aad7fa1c000
    0x000000004547c740: 00002aabe0162870 00002aaaf0761bf0
    0x000000004547c750: 00002aaaf07f20d0 00002aaadd628058
    0x000000004547c760: 00002aaadd628ee0 00002aaa00000001
    0x000000004547c770: 00002aaaeec996b8 0000000000000000
    0x000000004547c780: 00002aab2ecc9890 00002aad00000000
    0x000000004547c790: 00002aaadd627af0 00002aac5bc259c8
    0x000000004547c7a0: 0000000000000000 00002aaadd628010
    0x000000004547c7b0: 0000000000000001 00002aaaee4f8870
    0x000000004547c7c0: 00000030f1218c01 00002aaae5222d38
    0x000000004547c7d0: 0000000000010001 00002aaaab6cc928
    Instructions: (pc=0x00002b00816f2a27)
    0x00002b00816f2a17: 89 f0 eb ea 90 66 66 66 90 55 48 89 e5 41 54 53
    0x00002b00816f2a27: 0f b7 57 10 48 89 fb 44 8d 62 01 49 63 fc e8 06
    Stack: [0x000000004537d000,0x000000004547e000], sp=0x000000004547c5e0, free space=1021k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V [libjvm.so+0x5d8a27]
    V [libjvm.so+0x474a9d]
    V [libjvm.so+0x31f896]
    v ~BufferBlob::Interpreter
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    v ~BufferBlob::Interpreter
    J com.sleepycat.je.recovery.Checkpointer.flushIN(Lcom/sleepycat/je/dbi/EnvironmentImpl;
    Lcom/sleepycat/je/dbi/DatabaseImpl;Lcom/sleepycat/je/log/LogManager;
    Lcom/sleepycat/je/recovery/Checkpointer$CheckpointReference;Lcom/sleepycat/je/recovery/DirtyINMap;
    IIZJZLcom/sleepycat/je/recovery/Checkpointer$FlushStats;Lcom/sleepycat/je/cleaner/LocalUtilizationTracker;Z)V
    J com.sleepycat.je.recovery.Checkpointer.flushDirtyNodes(Lcom/sleepycat/je/dbi/EnvironmentImpl;Lcom/sleepycat/je/recovery/DirtyINMap;Ljava/util/Map;ZJZLcom/sleepycat/je/recovery/Checkpointer$FlushStats;)V
    v ~BufferBlob::Interpreter
    v ~BufferBlob::Interpreter
    v ~BufferBlob::Interpreter
    v ~BufferBlob::Interpreter
    v ~BufferBlob::StubRoutines (1)

    Hello,
    I know your request is a bit old but I have exactly the same error on a jboss server but no HS_ERR_PID was create...
    Java VM: Java HotSpot(TM) 64-Bit Server VM (10.0-b23 mixed mode linux-amd64)
    # Problematic frame:
    # V [libjvm.so+0x5d8a27]
    Do you remember how you solve your problem?
    regards
    Arnaud

  • Web ADI on 11.5.10.2 Issue with migrating templates desktop ADI to WebADI

    Version 11.5.10.2
    Applied patches:
    7375915
    7350414
    3036401
    5853005
    11793768
    12700905
    Migrating FSG templates from desktop ADI to WebADI. When we open an existing template, we put the template name in the file and then upload we have the following issues:
    - The template does not have headers.
    - If we change the template at all, the columns get left justified instead of right justified.
    - numeric value is showing for date and time instead of standard format for date and time.
    - Column widths are not holding.
    - Cannot get column headings to show up.

    Have you applied all pre-req. patches?
    Please see the following docs and make sure you have all the patches applied.
    How To Determine Which FSG Patches Have Been Applied In Release 11i, 12.0 and 12.1 [ID 549289.1
    Unable To Publish Report In Excel After Applying Patches 7375915/7350414 [ID 789725.1]
    UNABLE TO VIEW OUTPUT WHEN PUBLISHING REPORT SET WITH CONTENT SET [ID 827461.1]
    Unable To Publish FSG Reports When Content Sets Are Used [ID 787289.1]
    How To Use Content Sets (Parallel Types) in Report Manager to Display FSGs in Multiple Workbooks [ID 881532.1]
    FSG: Error : Content Set ID Is Not Empty And It Is An FSG Submission When Using Content Set [ID 1294149.1]
    What Are the Patch Numbers for Prerequisites for Patch 5377946? [ID 945032.1]
    Fsg Column Headers Are Offset, Date Format is incorrect after applying FRM patches [ID 834860.1]
    Thanks,
    Hussein

  • Issue with Item Template

    Hi
    I have created an Item template and in that template I added Folders/template documents into the Decision point level.
    Following that I changed the status to active making this template available during item creation.
    While I create an Item using this template, the folders and document structure does not get inherited from the template.
    Dates and other metadata like description gets created from the template.
    Can anyone help me out with this issue?

    Hi Melvi,
    Document templates for different object have to created separately. Select the check box Document template for portfolio templates and create your own structure. In the object you will have to use this create template to copy the same structure.
    Best Regards,
    Priyatham

Maybe you are looking for

  • Where are my AudioBooks?

    Where are my Audiobooks? Over the last 2 years I have purchased several Audiobooks and listened to them for the most part. Wherever I purchased them they showed up. I have a Mac Computer, iPhone & iPad and every one is different. Where are they? Ever

  • How to get the transport number once transported to other SAP Instance

    i saved a zprogram in a transport number. but that was transported to another  sap instance.....Can i get the tnumber from my previous instance ????

  • Custom Tag Implementation seems inefficient

    I've been playing around a bit (alright, so maybe not all that much)           with custom tags, and it seems like the actual implementation of custom           tags (tag handler object(s) per tag) is much more resource-intensive           than would

  • Directory - Org Unit Listing Not Returning Any Results

    Hello Everyone, We are using Nakisa v4.1 on EHP7.0 at the moment. In the user interface, Directory > Org Unit Listing is not returning any results while Employee and Position Listings are working just fine. What would be the cause ? Appreciate your h

  • OID installation without GUI.

    Hi there, I'm attempting to install OID (10.1.4) on an AIX based system. I'd rather not have an X server installed so I was wondering if its possible to set the installer to have a 'no display' option whereby I can install the thing via an ssh connec