Performance Appraisal-Move the document from Part Appraiser to Appraiser

Hello
After the 2nd level manager (part appraiser) has rejected the document, it should be sent back to the 1st level manager review the notes and make changes before resending it back to the 2nd level manager.
When the second level manager receives the document, it is in "IN PROCESS-PART APPRAISAL IN PROCESS" status. Is it possible to change the status of the document from this status to "IN REVIEW" or some other status for the first level manager to make changes based on the 2nd level manager's feedback.
How else can we incorporate the functionality? Please advice.
Many thanks in advance.

Hello
We were able to achieve this by adding multiple substatus to the status "In Process" and then control the authorization at that level.
Thanks

Similar Messages

  • Cannot move the pages from one document to another

    Hi,
    I cannot move the pages from one document to another, abobe gets crashed. I am not sure but I think this was happening when I try to copy or move the threaded content. How to resolve this, this is happening in both CS4 and CS5. Can anyone help me?

    Thanks for ur reply.
    1. Open two documents, for ex doc1 and doc2, doc1 contais 4 pages, doc2 contains 2 pages
    2. Using Move Pages from the Pages panel menu in doc1, moving 1st two pages to doc2
    Move Pages  : 1-2
    Destination   : After page 1
    Move to        : doc2
    Actually I was not able to copy the textframe which is linked with another, immediately it crashes.

  • How to move the script from one env to another

    Hi
    I have a database where i have two schemas.
    1)Owner and 2) User . User schema contains all synonyms for the objects present in Owner schema and the application will connect to user schema only.
    Now i have 2 script files 1) create tables in the owner + giving grant access for user 2 ) create synonyms for objects in the owner
    I have to move the code from Dev environment to QA . For QA i dont have privileges hence have to give the script file to DBA to run it
    My DBA says....give the scripts through clearcase. only 2 script files should be there and environment information should not be hardcoded. i.e
    for statements in the script file like : grant access for <table_name> to USERSCHEMANAME and create synonym <table_name_alisa> for OWNERschemaNAME.table_name
    how do i give the scripts to my DBA with out hardcodiing.    How do you have this code movement in your project ?
    Should i use any placeholder for OWNERNAME ( environment spefcific informationn) and should ask them to replace it by the corresponding env name while executing
    What should i do?
    Hope i am clear please let me know if iam not clear
    regards
    raj

    how do i give the scripts to my DBA with out hardcodiing. How do you have this code movement in your project ?
    Should i use any placeholder for OWNERNAME ( environment spefcific informationn) and should ask them to replace it by the> corresponding env name while executing
    Use a variable for schema names or create public synonyms.
    And document how the DBA should implement your changes.
    Your DBA should have his own "su'ish"/ "@ conn.sql'-ish" scripts for that.
    Passwords can be reset runtime temporarily, and set back after the implementation completed successfully.

  • How do I move a document from my MacBook Pro to my iPad?

    How do I move a document from my MacBook Pro to my iPad?

    What kind of document is it?  Keep in mind that you may need an app on the iPad to do anything with the document.  You can sync documents to particular apps by opening iTunes with your iPad connected, select the iPad in iTunes and click the Apps tab:
    Then scroll down to the File Sharing area, select the target app and drag a document to the Documents box.
    Alternately, you could use something like Dropbox to sync documents between your MBP and your iPad, as well as any other devices you like.

  • Migrate the document from database to Content Server

    Dear All;
    There is a ECC6 using for 5 years and I am setting up a External Content Server which link to this ECC6 server, from now on the new incoming documents like scanned document, email etc will save to Content Server. 
    However, for the past 5 years those old incoming documents that save in the ECC database, how can l migrate it to Content Server?  In the past the document mostly save with GOS (generic object service) option.
    Please advise.
    Thanks
    Jordan

    Hi Jordan,
    from DMS point of view I would recommend you to see the reports DMS_KPRO_CONVERT and DMS_KPRO_CONVERT2 which can be used to transfer original files from older storage to KPRO storage logic.
    If you want to move the originals from an archive or vault to a Content
    Server, please use the DMS_KPRO_CONVERT and DMS_KPRO_CONVERT2 report I 
    would kindly ask you to see teh documentation on DMS_KPRO_CONVERT report
    in transaction SE38, which explains the whole process and gives        
    necessary information.                                                                               
    This conversion program offers two possibilites:                                                                               
    - Complete migration:                                                  
    The meta data of the document info record and the checked-in original  
    application files are migrated together. The checked-in original       
    application files are transported into the storage catgories.                                                                               
    - Step-by-step migration:                                              
    In the first step meta data is migrated. The original application files
    remain in the old storage data. The migration of original application  
    files starts after you have processed the files with the integrated    
    viewer and checked them into a secure storage area.                                                                               
    I hope this information could be useful for you. Further I would       
    really recommend you to get in touch with your local consulting        
    organisation because this is a very critical and individual process.   
    To grant that the whole migration is done correctly I can only advise  
    you to contact your local consulting organisation.                     
    Best regards,
    Christoph

  • Space bar not working to move the document

    I am having issues with shift-constrain resizing not working, and option-drag duplication not working, also using the space bar to move the document around the viewport. OSX 10.10, InDesign CC. I reset the preferences, restarted which failed to solve the problem, anyone knows how to make it work? Thanks!

    Hi
    I'd just like to add, since updating a couple of Mac Pro clients, running Mavericks 10.9.2 and Photoshop CC with the latest 6.3.8-2 Wacom Driver, early signs are that users have noted an improvement in performance of Photoshop CC.
    Its quite early days yet, however shortcuts that had been slow to respond and we have had multiple app crashes in Photoshop CC when using multi-layed 16-Bit Tiffs, seem to be ironed out.
    Also we have had to use the whitewindow plugin for photoshop too.
    Sorry to crash in on an InDesign thread regarding Photoshop CC issues, however I have seen a lot of common ground for many folks issues with Adobe software being they are using a Wacom device of some sort.
    Would be good to know if others have noted any improvements with this driver?

  • CS5 - Standard Screen Mode - Hand Tool don't move the document

    Hi all
    In PS CS5 -> Standard Screen Mode -> Hand Tool don't move the document unless you zoom the document so it became bigger than the working area!
    Is it possible to use the hand tool (move the document arround) while the document is smaller than the working area?
    Thanks

    Why not just shrink the window border and move the Window around to where you want it, as has been described above several times?
    because that will make the working area much smaller. You'll be able to move the Window around, but if you zoom in, you will lose working area and you'll have to use the scrolls.
    Maybe it would help to describe WHY you want to move the image within the window/tab?
    There are many reasons for that and I don't have the time to describe all of them right now. I'll give you just one: if you paste an object that is bigger than the document size and you want to transform the object (scale down for example) - you press Ctrl+T and the top, bottom and middle right points are no visible (they are outside the area). Then you have 2 options if you want to scale down:
    1) scale the image with the left side point, and then move the image back to the document
    2) zoom in the document -> so it became bigger than the working area -> so you can move it with the Hand tool (spacebar) -> so you can see the right points -> so you can transform the object -> and then you zoom out again
    both ways are just very slow
    if you can move the document inside the working area (inside the window) then you can perform the task much quicker:
    move it with the Hand tool (spacebar) -> grab some of the right point and transform as simple as that. And you still can see all of your document, and you can still reach the right points
    this is just one example, I can tell you more

  • Move a document from an iPad to a Mac without WiFi access?

    Any way to move a document from an iPad to a Mac without WiFi access?
    The GoFlex Satellite and the Hypershop iFlashDisk seem to only allow document transfer documents from the Mac to the device, not vice versa.
    Any experience with other methods?
    Thanks
    Ji

    That's great news! 
    I don't yet own iFlashDisk, but was considering - after I discovered GoFlex Satellite would not support iPad to Mac transfers.
    I'm still investigating the DiskAid & FileApp Pro - will undoubtedly give them a try to see how it works.
    Thanks
    Jim

  • DOM - create new document from part of other document

    Hi.
    How to create a document from part (sub tree) of the other document?
    document 1.
    <?xml version="1.0" encoding="UTF-8"?>
    <root>
    <meta1>blaa blaa</meta1>
    <meta2>blaa2 blaa2</meta2>
    <data>
    <info>
    <name></name>
    </info>
    </data>
    </root>
    document 2 shuold be:
    <?xml version="1.0" encoding="UTF-8"?>
    <data>
    <info>
    <name></name>
    </info>
    </data>
    Or can I just remove root and meta elements?

    Something like this:DocumentBuilder db = // create a DocumentBuilder;
    Document newDoc = db.newDocument();
    Node newRoot = // the Element you want to be the root of the new document;
    Node root = newDoc.adoptNode(newRoot);
    newDoc.appendChild(root);

  • Move the stock from the raw material storage type to production storage typ

    Hi
    How to move the stock from the raw material storage type to production storage type.
    note that both stoare type be in same storage location only.
    pls reply me

    Hi Raj,
    I WM process, issue or transfer to Production process results in picking of material from the RM storge location / storage type.
    If you mean your production stoarge location is same as that of the RM stoage location, it is just a tranfer within a warehous.
    which you could do with posting change document. This doesnt reduce your WM stock.
    If the production stoarge location is differnt from RM stiage location, then it is picking process from WM and goods issue.
    this reduces your WM stock.
    hope it helps.
    Regards
    Harish

  • How do I move the pictures from my iPhone 4s to a folder on my computer?

    How do I move the pictures from my iPhone 4s to a folder on my computer?

    you will need to import your pics to your computer http://support.apple.com/kb/HT4083

  • How do i move the data from Apple ID to iCloud

    Hi,
    i know that you can't merge Apple ID's and iCloud ID's but what I would like to do is move the data from one to another and by data I mean my contacts and calendars without loosing them.
    What I did so far was to signout from my iCloud ID into my mac to log in into the Apple ID so all could be sync to the Apple ID but it didn't as soon as I logged out the data where lost ! (Calendar, Contacts...)
    What processs can I use to save those data so i can move to Apple ID only ? any idea or suggestions ?
    Thanks

    Before you can move data from one account to another, you need to log into both accounts at the same time. Log into one of the accounts as a secondary account in system preferences > mail, contacts and calendars. Contacts can be moved by dragging from one account to another, calendars will need to be exported and re-imported.

  • How can you move the objects from one server to another?

    how can you move the objects from one server to another?

    Hi,
    Collecting objects for Transporting
    1. rsa1->transport connection
    2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
    3. then choose your infocube and 'transfer'
    4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
    5. after objects collection finished, create request
    6. If they are $TMP, then change the package.
    7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
    8. You can check the request in SE09 to confirm.
    Releasing Transport Request  
    Lets say you are transporting from BWD to BWQ
    Step 1: In BWD go to TCode SE10
    Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
    Note: First release the child request and then the parent request
    Steps below are to import transport (generally done by basis )
    Step 1: In BWQ go to Tcode STMS
    Step 2: Click on Import queue button
    Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
    Step 4: Click on refresh button
    Step 5: High light the trasnport request and import it (using the truck icon)
    Transport
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
    Hope this helps.
    thanks,
    JituK

  • I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

    I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

    Mixing files with data is not always great idea.
    See info here.
    Q3 http://pondini.org/TM/Time_Capsule.html
    Why not just connect the PC directly to the TC by ethernet and copy the files over?
    It is hugely faster and much less mucking around.
    In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
    There is more info here.
    http://support.apple.com/kb/HT1331

  • How do I move the music from my iTunes library on my desktop computer to my iPad?

    How do I move the music from my iTunes library on my desktop computer to my iPad?

    Connect the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (if you have iTunes 11 on your computer then you can enable the left-hand sidebar via control-S on a PC, option-command-S on a Mac), and then use the Music tab on the right-hand side of iTunes to select which of your iTunes music to sync to the iPad's Music app
    Syncing music : http://support.apple.com/kb/HT1351

Maybe you are looking for