Performance assessment test

hi everyone.
i have an issue while transporting change requests..i am able to transport the request but the file type it shows is "performance assessment test".
i am using 4.7 unicode
Thank you
kiran kumar

i found that if there is any software in the
computer whoes extension is same as the sapsid then all the datafiles in the cofiles
folder will be saved with the same extension.
Example :
if my sapsid is TST and there is a software whoes files saved with the same extension
then the my transport requested will be saved
as that particular software file with the
same ICON.
This should not cause any issues.
Thank you
kiran kumar.

Similar Messages

I'm running 10.5.8 on a MacBook Pro and need to update to Java 7 in order to take a software assessment test for a potential job. The Java app will only upgrade from 10.6 or higher. What can I do?

I'm running 10.5.8 on a MacBook Pro and need to update to Java 7 to take software assessment tests online for a potential job. What can I do?

Apple Java for Mac OS X 10.5 Update 10
Apple Java for Mac OS X 10.6 Update 17
Apple Java 2013-005
I would suggest you upgrade your computer's OS minimally to Snow Leopard 10.6.8.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

XI/PI performance/stress test report

Dear friends,
Does anybody have the XI performance/stress test report or the template for the reference? I need to write a report, but currently still don't have any idea about the content in this document.
Thanks so much for every kind help.
Regards,
Bean

Sorry guys, but I mean a document and not SAP transactions

KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone

KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone
Just noticed this; SWEET!
-----ProcedureTo perform a test using the hardware diagnostic tool on the BlackBerry smartphone, complete the following steps:
On the Home screen on the BlackBerry smartphone, click Options.
Select Status.
On the Status screen, type test.Note: On BlackBerry smartphones that support SureType® technology, use the multi-tap input method.
From the menu on the Device Self Test Application screen, select Start.
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/

This is cool!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PERFORMING A TEST BACKUP (VALIDATE BACKUP) USING RMAN

제품 : RMAN
작성날짜 : 2002-05-30
PERFORMING A TEST BACKUP (VALIDATE BACKUP) USING RMAN
=====================================================
PURPOSE
RMAN을 이용하여 Test Backup을 수행하기 위한 정보를 제공한다.
EXPLANATION
8.1.7 부터 RMAN에서 BACKUP command에 VALIDATE keyword를 사용할 수 있게 되었다
이 명령의 수행은 다음과 같은 작업을 수행한다.
- Datafile의 physical and logical corruption을 check한다.
- 모든 database file들이 존재하는지, 그리고 올바른 위치에 있는지를 검증한다.
RMAN은 실제적으로 backupset을 생성하지 않는다 그러나 그것들이 backup될 수
있는지 없는지를 결정하기 위해서 기술된 file들을 scan한다.
BACKUP VALIDATE 는 backup job을 수행시 수행되는 것을 제외하고는
RESTORE VALIDATE와 거의 비슷하다.
EXAMPLE
아래와 같은 command들을 수행하여 backup하고자 하는 database file과 archived redo
log들이 실제로 backup될 수 있는지를 검증할 수 있다.
RUN {
ALLOCATE CHANNEL ch1 TYPE 'sbt_tape';
BACKUP VALIDATE
DATABASE
ARCHIVELOG ALL;
Note: MAXCORRUPT or PROXY parameter는 VALIDATE option과 함께 사용할 수 없다.
REFERENCE DOCUMENTS
NOTE:121109.1

Clint,
I ran the command lines you wrote me after i placed the database in Startup MOUNT state, RMAN gave error messages that the database needs to be open:
RMAN> SQL 'ALTER TABLESPACE USERTB2 OFFLINE IMMEDIATE';
sql statement: ALTER TABLESPACE USERTB2 OFFLINE IMMEDIATE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 11/04/2005 15:31:33
RMAN-11003: failure during parse/execution of SQL statement: ALTER TABLESPACE US
ERTB2 OFFLINE IMMEDIATE
ORA-01109: database not open
Then I ran the same command lines after I opened the database, RMAN gave error messages that "offline immediate disallowed unless media recovery enabled":
RMAN> SQL 'ALTER TABLESPACE USERTBS2 OFFLINE IMMEDIATE';
sql statement: ALTER TABLESPACE USERTBS2 OFFLINE IMMEDIATE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 11/04/2005 15:48:17
RMAN-11003: failure during parse/execution of SQL statement: ALTER TABLESPACE US
ERTBS2 OFFLINE IMMEDIATE
ORA-01145: offline immediate disallowed unless media recovery enabled
I am stuck again and need your help!
Thank you,
Mitra

Which tool is support Discoverer performance/load testing

Hi,
Any one can tell me which tool is supporting the oracle discoverer for olap 10.1.2.48 performance / load testing.
We are using one of the third party tool called QALOAD. We are unable to trace the discoverer session.
We wanna perform 50 concurrent users peformance test.
is oracle is recommending any tool for performance on the discoverer for olap 10.1.2.48??.
or any one can tell me based on your experience which tool is supporting/best tool to test.
thanks,
Nats!!!

Did you get an answer to your question. We are now trying to use Load Runner rmi calls and have difficulties.
Please provide any information you have on this matter.
Thanks.

I have a seven year old desktop. how do i run a hardware assessment test

i have a seven year old desktop. how do i run a hardware assessment test?

Hi johnnysteelers,
Welcome to the Apple Support Communities!
Please use the attached article as a resource and for information on running Apple Hardware Test.
Using Apple Hardware Test - Apple Support
Using Apple Hardware Test on computers with OS X v10.7 and earlier
AHT is located on the Applications Install Disc 2 and should be included with your computer or the MacBook Air Software Reinstall Drive on a MacBook Air (Late 2010). To start AHT on these computers make sure the Applications Install Disc 2 is inserted into the built-in optical drive, external Apple Superdrive, or for the MacBook Air (Late 2010) be sure the MacBook Air Software Reinstall Drive is inserted into a USB port. Then, follow steps 1-6 outlined in the previous section of this article.
Have a great day,
Joe

Apple Hardware Test (Perform Extended Testing)

Hit the 'E' key to select Perform Extended Testing if you are unable to select it with a mouse.
I've been working on my wife's new iMac (I7 27") that she purchased a few months ago. Because it is so new, I wouldn't even waste my time on it and just sent it back to Apple to have them look at it (currently suffering slow startup times), however we recently moved overseas to Kyiv, Ukraine. During the troubleshooting, I found the following site:
http://support.apple.com/kb/ht1509
which informs users how to use Apple's Hardware test. Unfortunately, the app only recognized the wireless keyboard and not the wireless mouse. I didn't know who to contact to have the webpage updated because there is a way you can enable the extended hardware test from the keyboard (by hitting the 'E' key). Unfortunately, I had to figure this out on my own after exhaustive searching on the internet and websites. Hopefully, someone can pass this information along. I wish the app was more keyboard friendly.
I see some other posts that I haven't tried yet, so hopefully they might resolve me issue.
If I can't fix the problem, I'm going to have to see if there may be a rep in this country who to replace/fix the unit.
Kevin

Yesterday I ran the Apple Hardware test ( Version 3A181 - Perform Extended Testing ) from my MacBook OS Install DVD and Everything passed 100% ( entire test took 57 minutes and 15 seconds )
Forgot to mention after the Apple Hardware test was finished No Problems Were Found...
This isn't making any sense to me - Any Suggestions to what the cause of these Safe Boots may be ?

BT Performance Ping Test speed way out.

Anyone know why the BT Performance ping test is way out compared to other test tools?
When I run the performance test, BT's ping test returns 'speeds' of over 100ms (yes, that'sone hundred ms). Yet if I perform similar tests under the same conditions ie literally seconds later, using different tools such as Speedtest.net, Im getting pings of 20 - 32ms. Go back to BT Performance test and ping is still in the range of 100ms.
Ive even done ping tests using servers nearly 150 miles from home and even they return pings of less than 30ms!
Why the massive difference? Why is BT's ping taking on average 100ms. Do they use a London server or something?

Hi curiousfellow,
Thanks for posting. Can you post the results you're getting from the different servers and we'll take a look at them for you.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Performance Assessment - "Performance and Potential Update in TMC" for VC

Hi All,
I am interested in using the "Performance and Potential Update in TMC" enhancement follow-up processing on a Performance Assessment form for a VC object rather than the VA object. I have always got this to work for the VA but so far not for VC. WE put a debugger on BAdI HRHAP00_FOLLOW_UP but it appears this only gets called when you use Follow-Up from the Appraisal Documents menu in PHAP_ADMIN if your Final Appraisal and Progress Potential are not in the VA object.
Any advice much appreciated!
Kind regards,
Luke

SAP have informed us that the Follow-up BAdI requires a new implementation to specify the VC object.

AFAB program strange performance in TEST mode

Hi colleagues,
We are experiencing a strange performance in AFAB program.
We have uploaded several assets in a particular company code. When executing AFAB transaction in TEST mode, the new assets are not considered, whereas, when performing a REAL execution yes they are.
We think that when reconciliating assets at the end of the year, this issue which is not harmful (but strange indeed) may be solved, but we are not sure at all.
Can anybody provide a clue on what is happening.
Thanks and my best regards

Hi When you run this report online in test it will only show +/- the first 1.000 assets and the new asset are later in the data base and you don't see them.
You have to run it in test mode in back ground and look in the spool to the result (default the spool shows arround 20 page's but this you can change or go to the next 20 pages)

I can not perform hardware test on 2011 imac with mavericks

I unplug all devices from my iMac and held the d key and still can not get to the hardware test. The Mac store was able to perform it with a wired mouse even after I added more ram therefore I know it can be performed. Am I leaving something out?

Read the instructions in Using Apple Hardware Test.
If your iMac shipped with discs, you must run AHT while holding the d key while starting the Mac with its grey Applications Install DVD inserted in the optical drive.
To force the Internet version of AHT to load: with two fingers hold option d while starting your iMac with a third finger.

Xcode service - CI Bot error when performing Unit Tests

When an Xcode Service bot attempts to perform a build with 'run unit tests' enabled, the build always fails. When looking at the log file the same error repeated many times:
xcsbuildd[1966] <Warning>: [XCSBuildOperation.m:106 7368f310 +2126ms] Preflight connection to /var/XCSControl/com.apple.XCSTestUserPreflightService failed; retrying: No such file or directory
Followed by these messages a few lines later:
xcsbuildd[1966] <Error>: [XCSBuildOperation.m:102 7368f310 +2104ms] Timed out trying to connect to CG Session; giving up after 60 seconds
xcsbuildd[1966] <Error>: [XCSOperation.m:33 7368f310 +0ms] Error Domain=XCSBuildServiceDomain Code=0 "Cancelled integration because headless test environment is required but not available after 60s" UserInfo=0x7fa952571bd0 {NSLocalizedDescription=Cancelled integration because headless test environment is required but not available after 60s}
xcsbuildd[1966] <Debug>: [XCSOperation.m:28 7368f310 +0ms] Cancelling operation: XCSBuildOperation
I've hit a brick wall with this, and can't find anything on it.
Has anyone had this problem and found a fix?

Same problem here after updating the Xcode service to the latest version. Anyone found a solution ?

Adobe Illustrator: High Performance Build Testing

The Adobe Illustrator team is experimenting with technology that enables extremely fast rendering of Illustrator artwork. This provides significant improvements in zooming and panning artwork in Illustrator. The team is looking for volunteers to test this prototype under a non-disclosure agreement.
This prototype currently works only on Windows (7 & 8) with NVIDIA cards.
Please fill out this form if you can help the Illustrator team.
Thanks!
Neeraj Nandkeolyar
Ai Team Member

Dezzroy wrote:
I read that Swing apps will (secretly) use Direct X in Windows (and I guess OpenGL in Mac and Linux)... is this really true?Yes, this is true, however, there are some limitations. Up until Java 1.6.0_10, the Direct3D support on windows systems was limited to drawing lines. Support for complex operations has only been added recently, so you'll have to make sure that your JRE is up to date. Futhermore, some linux systems still have trouble with the OpenGL pipeline.
As for writing games using Swing, the answer is maybe. It depends on your approach. Swing itself obviously isn't meant for games, but Java2D, the underlying technology, is quite powerful. However, you'll have to read into a lot of new classes in order to unlock the required performance. Some hints to get you started:
1.) Check out the timing framework for your main update loop:
https://timingframework.dev.java.net/
2.) Take a look at VolatileImages. Basically, VolatileImages are image instances stored in the dedicated video RAM, and in most cases they can be drawn very quickly.
3.) Check out TexturePaint for... well, for textures. Its the same story as with VolatileImages.
4.) Definitely check out the BufferStrategy class. It allows you to bypass the usual swing rendering queue and directly draw into a Direct3D/OpenGL buffer, thus allowing for a lot more speed.
5.) Profile your application. It is very likely that other aspects (like synchronisation) are eating up more cpu time than the rendering code.

Sluggish performance- hardware test?

How can I run a Hardware/performance test on my Mac pro 2008(early).
2X3 GHz Quad-Core Xeon.
I am getting very sluggish performance from Motion and Avid programs.
Honestly I saw very little performance increase compared to my old Quad PPC.
I installed 16 gigs RAM from OWC.
ATI Radeon HD 4870 and a eSATA video RAID.
By all accounts this machine should be cooking- but it doesn't.
I ran DW on the Boot drive- but I still have issues.
I have read so much praise for the 2008's as great machines- so I just don't understand why I get so many hang ups.

Clone your drive (SuperDuper) so you have an exact backup image.
Question: did you migrate your apps from G5? It sounds like you did.
The nice thing about SuperDuper is it skips all the clutter (cache, temp, logs etc) and optimizes folder and free space.
Are you using drives from G5 that have not been reformatted?
I'm sure there are other things to look for under the hood.

Performance assessment test

Similar Messages

Maybe you are looking for