Performance benckmarks for Portal/Discoverer
This is kind-of the right forum...
I'm embarking on a project to implement a warehouse/portal system that will be implemented with portal and utilising components such as the Discoverer tool.
As a warehouse the project is perhaps a little atypical in that it will have a medium sized warehouse (probably measured in 10s-100s of GB for years 1-2) but a relatively large user community (overall in the 1000s, probable average 10-50, peak (at specific times of year in the 1000s).
I've looked through "3.0.9.8.2 Architecture & Scalability" but I was wondering if anyone could give some benchmark performance indicators for similar profile sites.
John Skelton
John,
I tried sending you a response to this direct, but your email was bounced ([email protected])
what I said was
"Metrics for Portal are very hard for us to define, .
We are working on the case-study type of document you are asking for, currently we only have one for my.oracle.com (attached, hence why I am mailing you directly) - which currently has 250,000 registered users."
You will need to download the whitepaper from the documentation area of portalcenter.oracle.com
Look for "Architecting my.oracle.com"
Thx
Jason Pepper
Similar Messages
-
BEST PRACTICES FOR CREATING DISCOVERER DATABASE CONNECTION -PUBLIC VS. PRIV
I have enabled SSO for Discoverer. So when you browse to http://host:port/discoverer/viewer you get prompted for your SSO
username/password. I have enabled users to create their own private
connections. I log in as portal and created a private connection. I then from
Oracle Portal create a portlet and add a discoverer worksheet using the private
connection that I created as the portal user. This works fine...users access
the portal they can see the worksheet. When they click the analyze link, the
users are prompted to enter a password for the private connection. The
following message is displayed:
The item you are requesting requires you to enter a password. This could occur because this is a private connection or
because the public connection password was invalid. Please enter the correct
password now to continue.
I originally created a public connection...and then follow the same steps from Oracle portal to create the portlet and display the
worksheet. Worksheet is displayed properly from Portal, when users click the
analyze link they are taken to Discoverer Viewer without having to enter a
password. The problem with this is that when a user browses to
http://host:port/discoverer/viewer they enter their SSO information and then
any user with an SSO account can see the public connection...very insecure!
When private connections are used, no connection information is displayed to
SSO users when logging into Discoverer Viewer.
For the very first step, when editing the Worksheet portlet from Portal, I enter the following for Database
Connections:
Publisher: I choose either the private or public connection that I created
Users Logged In: Display same data to all users using connection (Publisher's Connection)
Users Not Logged In: Do no display data
My question is what are the best practices for creating Discoverer Database
Connections.
Is there a way to create a public connection, but not display it in at http://host:port/discoverer/viewer?
Can I restrict access to http://host:port/discoverer/viewer to specific SSO users?
So overall, I want roughly 40 users to have access to my Portal Page Group. I then want to
display portlets with Discoverer worksheets. Certain worksheets I want to have
the ability to display the analyze link. When the SSO user clicks on this they
will be taken to Discoverer Viewer and prompted for no logon information. All
SSO users will see the same data...there is no need to restrict access based on
SSO username...1 database user will be set up in either the public or private
connection.You can make it happen by creating a private connection for 40 users by capi script and when creating portlet select 2nd option in Users Logged in section. In this the portlet uses there own private connection every time user logs in.
So that it won't ask for password.
Another thing is there is an option of entering password or not in ASC in discoverer section, if your version 10.1.2.2. Let me know if you need more information
thnaks
kiran -
What are the pros and cons of installing java+abap stack for portal?
Hi all,
1.What are the pros and cons of installing java+abap stack for portal?
2.what effect it does on the ume options to be choosen??
3.for the purpose of integration of r3,bw and crm on portal and crm 4.0 60.2.3 business package which option of stack(java or abap or both)will be good option and which ume option while installation should be choosen?
regards
RajendraHi Rajendra,
The NetWeaver Installation Master Guide offers some good scenarios on the pros and cons:
https://websmp201.sapag.de/~sapidb/011000358700005412792005E.pdf
In a nutshell:
ABAP+JAVA
Pros
- Decrease # of servers required to administer the portal
- Less costly
Cons
- Upgrades could be dependent on ABAP and Java release level
- Additional load on the server due to ABAP stack
- Limited scalability
JAVA and ABAP on separate server
Pros
- Improved performance
- Allows each system to be single-use purpose therefore downtime does not affect other components
- More scalable
Cons
- Adds complexity to landscape
- Additional costs
Regards,
Thomas Pham -
Configure EWA and performance monitoring of portal in solution manager
Hello All,
I want to configure EWA for portal in solution manager.
As well as want to get some data collection for performance of portal using solman.
so can anybody guide me for the same as well as provide some valuable inputs.
Thanks in advance.
Regards,
RamkrishnaHello,
u mean perormance of portal right?
I would suggest you to start with configuring this EWA,when it is done you will get the performance data from EWA itself and then we can anaylze and move forward
But still if you want you can refer to notes 485933,1017324 and 934808
They will be higly useful
Rohit -
Single file custom logging for portal service in 7.31
Hello Experts,
I have a portal service.
The service writes sensitive data to the DB and therefore I need tracing mechanism.
Until now I've used a custom txt file but now I want to use the SAP J2EE logging infrastructure (for performance, identifying user sessions etc...)
Since the severity of the messages will be set to 'info' I don't want to write the log entries to 'defaultTrace.trc', I want to write it to a custom file.
I'm aware of 'ForceSingleTraceFile' parameter but where can I set the logging properties? (in older portals I could use logger.xml in my portal component project and set a custom log file but as far as I understand 'logger.xml' is not supported anymore and its parameters are ignored).
Where can I find the documentation for setting logging properties for portal service in 7.31?
J2EE/Portal version is 7.31 SP7.
Regards,
Omrihi omri,
please have a look at this documentation (SpecificDestinationLogControllers - http://help.sap.com/saphelp_nw73ehp1/helpdata/de/2b/09343e32ff1033e10000000a114084/frameset.htm)
regards,
christian -
Performance management for appraisal document Targets defaulting...
Hi,
My question is about custom badi implementation in Performance management for appraisal document Targets defaulting...
Brief:
====
At the creation of the personal appraisal, the column containing the performance targets of the employee is pre filled with the targets defined in the previous appraisal cycle and contained in the previous year employee appraisal form or in the target settings document.
Solution:
1 Please give me the soultion which badi i can use?
and How to achieve to do this thru coding step by step?
2. And Can you please share any other synario defaulting developed previously.If u share these documents or coding .. It should be fine...
Help me to do fastly ..
waiting for asap response..
Thanks and Regards
Mohan.PHi Chris,
This component must be deployed in Portal because have a lot of services which need ESS in order to work properly. According with note 1408243 you must add those business components in your iView and only are available in that component. Once you deploy this component you do not need to assign any special role to users. The business object component is in Content Administration --> Portal Content --> Business Object --> ERP Common Parts --> Human Resources --> Employee.
Follow this link:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
And get rid of mismatch issues!!!!
Regards.
David Cortés
Edited by: David Cortes on Apr 22, 2010 11:53 PM -
About the performance of plumtree portal.
Please let me ask a question about the performance of plumtree portal.The good reply is not obtained although I have asked the support center in Japan.I saw the log of ptspy.Delay had occurred in the following two points.
1. Although it is a "<.static.> InetHost::Select(xxxx) is called on 0 write+xx read sockets." part, what processing is performed actually in the message by the plum tree by the processing of inethost.cpp in a WebDownloaderParallel.dll component?
2. Although it is the part of "CreateFilterContext()-Created new context at address" by the message, is it the operation which is creating the context path for connection with the exterior in PTGWFilter.cpp in a Gateway component?
Moreover, although delay of processing may occur in these parts, what factor can be considered?
Thanks,Hi, this is Nobuyuki, Plumtree PSO, working for this project.
I'm attaching snapshot of ptspy from them. I've found that there are two ares which
seem to take much time.
1.
125649 02-22 20:31:23 Debug Gateway 5788 5564 PTGWFilter.cpp(1271) OnEndOfRequest() - called for CtxtPass::TunnelIn <0x2a82210> request125650 02-22 20:31:23 Debug Gateway 5788 5564 PTGWFilter.cpp(232) DeleteContext() - Deleting context at address <0x03CE9478>.125651 02-22 20:31:23 Debug Unified Cache 5988 5936 ptcache.h(2547) PTCache<StoredType, KeySize>::GC() Ending TTL run with 0 item(s) freed!125652 02-22 20:31:23 Debug Unified Cache 5988 5936 ptcache.h(2468) PTCache<StoredType, KeySize>::GC() Starting new TTL run!125653 02-22 20:31:23 Debug Unified Cache 5988 5936 ptcache.h(2547) PTCache<StoredType, KeySize>::GC() Ending TTL run with 0 item(s) freed!125654 02-22 20:31:25 Debug Gateway 5788 3748 PTGWFilter.cpp(198) CreateFilterContext() - Created new context at address <0x03CE9478>.125655 02-22 20:31:25 Debug Gateway 5788 3748 PTGWFilter.cpp(944) OnReadRawData() - Called on new managed request <0x3923f00> with 1460 bytes of data (GET /portal/server.pt?in_hi_userid)125656 02-22 20:31:25 Debug Gateway 5788 3748 PTGWFilter.cpp(1147) OnReadRawData() - Disable Notifications for request <0x3923f00>.(NOT a gateway request)
Process id of portal is 5988, not 5788.
2.
151358 02-22 20:34:27 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1057) 1751857657 : < .static. > InetHost::Select(2104) is called on 0 write + 1 read sockets.151359 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(996) 1751859579 : <0x0A132950> InetHost::Recv(16234) is called for host "http://eippt2.cc.avex.co.jp:80".151360 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1036) 1751859579 : <0x0A132950> InetHost::Recv(16234) exiting for host "http://eippt2.cc.avex.co.jp:80" in 0 mS.151361 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1057) 1751859579 : < .static. > InetHost::Select(823) is called on 0 write + 1 read sockets.151362 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(996) 1751859579 : <0x0A132950> InetHost::Recv(16234) is called for host "http://eippt2.cc.avex.co.jp:80".151363 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1036) 1751859579 : <0x0A132950> InetHost::Recv(16234) exiting for host "http://eippt2.cc.avex.co.jp:80" in 0 mS.151364 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1057) 1751859579 : < .static. > InetHost::Select(823) is called on 0 write + 1 read sockets.151365 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(996) 1751859594 : <0x0A132950> InetHost::Recv(16219) is called for host "http://eippt2.cc.avex.co.jp:80".151366 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1036) 1751859594 : <0x0A132950> InetHost::Recv(16219) exiting for host "http://eippt2.cc.avex.co.jp:80" in 0 mS.151367 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1057) 1751859594 : < .static. > InetHost::Select(813) is called on 0 write + 1 read sockets.151368 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(996) 1751859594 : <0x0A132950> InetHost::Recv(16219) is called for host "http://eippt2.cc.avex.co.jp:80".151369 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1036) 1751859594 : <0x0A132950> InetHost::Recv(16219) exiting for host "http://eippt2.cc.avex.co.jp:80" in 0 mS.151370 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1057) 1751859594 : < .static. > InetHost::Select(813) is called on 0 write + 1 read sockets.151371 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(996) 1751859594 : <0x0A132950> InetHost::Recv(16219) is called for host "http://eippt2.cc.avex.co.jp:80".151372 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 inethost.cpp(1036) 1751859594 : <0x0A132950> InetHost::Recv(16219) exiting for host "http://eippt2.cc.avex.co.jp:80" in 0 mS.151373 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 httprequest.cpp(1883) 1751859594 : <0x099E9110> HttpRequest::Process(20000) completed one of the requests in 3781 msec.151374 02-22 20:34:29 Performance WebDownloaderParallel.dll 5988 3960 httprequest.cpp(2185) 1751859594 : <0x099E9110> HttpRequest::Process(20000) completed in 3781 msec.
All lines are Performance type and I guess turning off performance output of ptspy may
elimnate this bottle neck. -
Unable to process EWA service session for portal instances
Hi Guru,
I am in process of generating EWA reports for portal ,below are the steps I have completed successfully.
1. SMD agent installation on portal.
2. Defined portal system in SMSY.
3. completed SOLMAN_SETUP.
4. Completed Setup Wizard for managed system.
5. Deploy IS agent via SDM in Solman.
6. Introscope agent setup done for managed system
7. Managed system data is visible in IS Enterprise Manager.
I have created EWA service session for portal but I am unable to process the service session in DSWP ,I have ran SM:EXEC SERVICES job but still I am unable to process the session data.
System Configuratoi: SAP EHP 1 for SAP Solution Manager 7.0 and portal is netweaver 7.0
Thanks
AbullaisHi,
I have exactly the same problem as this and have performed all the checks as specified but still my Java only NW 7 system shows "Dates for this session are overdue".
My Solman system is Ehp1 SPS 20 and all the managed system setup using the wizard has completed successfully. In Root Cause analysis I can see the data that the extractors have gathered on the J2EE system and in Enterprise Manager I can see the Introscope data also.
The only thing I can think of that may be affecting the EWA session is that after I added the system into the logical component that is part of the Production solution landscape the scheduled EWA session that then appeared for the J2EE system in the list of sessions had a date set for the next scheduled EWA run (29th March). To test the EWA report for my J2EE only system I used the "change date" option after clicking on the J2EE session and set it to 25th March (this changed on 24th March). The session date then reflected the EWA session for the J2EE only system woul run on the 25th.
Checking the session this morning I have the red flag with "Dates for this session are overdue" status.
The sessions for the ABAP based systems are working fine, it's only this one system that is J2EE only that I have a problem with.
Any pointers ?
Regards,
Brian. -
Monitoring tool for performance focused for Ebusiness.
Hi partners,
We are going to evaluate some "monitoring" performance tools for an Ebusiness environment, so I would like to know if you can give any recommendations about any tool focused for Ebusiness environment.
Any advice will be really appreciated.
Thanks in advance.
Francisco Mtz.二、 The following includes SGAgent for Oracle E-Business Suite Enterprise Edition monitor KPIs click here 。
1. SGAgent can monitor all KPIs those Oracle standard edition includes;
2. SGAgent can monitor more Oracle Instances 、more type database(Like DB2 MS SQL Server Sybase)、more Oracle E-Business Suite Instances at the same time and the same screen;
3. Oracle EBS Patch Monitor(KPI:Username、Patch Name、Patch type、language、Patch created date、last updated date);
4. Oracle EBS Profile Parameters monitor(KPI:Application username who updated the profile last、Last updated date、Application name、Profile Parameter name、Profile Parameter description、Language、Profile Value、Level ID、SQL Validation、Hierarchy type、Write allowed flag、Read allowed flag、last update by userid);
5. Oracle EBS Application users login monitor(KPI:Login ID、Oracle application login username、Login user description、Application users email address、Login start time、Login End time、login type、Operation system Session ID);Operation: Can kill user directly。
6. Oracle EBS Application users Activity(KPI:Program ID、Program type(Forms or Concurrent Programs)、Program name、Running Program Username、user description、Program start time、Program end time、cost time (Second)、Application User Email Address); Operation:Kill the running program(e.g. Forms ,Concurrent Programs, Concurrent Requests)。
7. Oracle EBS Discoverer Reports Top 10 running times per month(KPI:Instance name、month、Discoverer Report Name、Running times);
8. Oracle EBS Discoverer Reports Activity (KPI:SID,Serial#、Execute times、Oracle username、machine、os username、Program type、SQL、CPU Time 、PGA-ALLOCATED、PGA USED、PGA Freeable); Operation:kill the running Discoverer Reports directly。
9. Online realtime Suport:SGAgent user can press the button in the top menu,chat with TechWiz Engineers directly using text words。
10. Store and analyze Historical data
11. Remote monitor :SGAgent can send its output by FTP to a public IP. Then the clients can monitor his organization from the web with any device that support web browsing.
Add my MSN;[email protected] -
Performance Issue for BI system
Hello,
We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to change the parameter abap/buffersize which was 300Mb to 500Mb. But still no major improvement is found in the system.
There is 16GB Ram available and Server is HP-UX and with Netweaver2004s with Oracle 10.2.0.4.0 installed in it.
The Main problem is while running a report or creating a query is taking way too long time.
Kindly help me.Hello SIva,
Thanks for your reply but i have checked ST02 and ST03 and also SM50 and its normal
we are having 9 dialog processes, 3 Background , 2 Update and 1 spool.
No one is using the system currently but in ST02 i can see the swaps are in red.
Buffer HitRatio % Alloc. KB Freesp. KB % Free Sp. Dir. Size FreeDirEnt % Free Dir Swaps DB Accs
Nametab (NTAB) 0
Table definition 99,60 6.798 20.000 29.532 153.221
Field definition 99,82 31.562 784 2,61 20.000 6.222 31,11 17.246 41.248
Short NTAB 99,94 3.625 2.446 81,53 5.000 2.801 56,02 0 2.254
Initial records 73,95 6.625 998 16,63 5.000 690 13,80 40.069 49.528
0
boldprogram 97,66 300.000 1.074 0,38 75.000 67.177 89,57 219.665 725.703bold
CUA 99,75 3.000 875 36,29 1.500 1.401 93,40 55.277 2.497
Screen 99,80 4.297 1.365 33,35 2.000 1.811 90,55 119 3.214
Calendar 100,00 488 361 75,52 200 42 21,00 0 158
OTR 100,00 4.096 3.313 100,00 2.000 2.000 100,00 0
0
Tables 0
Generic Key 99,17 29.297 1.450 5,23 5.000 350 7,00 2.219 3.085.633
Single record 99,43 10.000 1.907 19,41 500 344 68,80 39 467.978
0
Export/import 82,75 4.096 43 1,30 2.000 662 33,10 137.208
Exp./ Imp. SHM 89,83 4.096 438 13,22 2.000 1.482 74,10 0
SAP Memory Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
Roll area 2,22 5.832 22.856 131.072 131.072 IDs 96,61
Page area 1,08 2.832 24.144 65.536 196.608 Statement 79,00
Extended memory 22,90 958.464 1.929.216 4.186.112 0 0,00
Heap memory 0 0 1.473.767 0 0,00
Call Stati HitRatio % ABAP/4 Req ABAP Fails DBTotCalls AvTime[ms] DBRowsAff.
Select single 88,59 63.073.369 5.817.659 4.322.263 0 57.255.710
Select 72,68 284.080.387 0 13.718.442 0 32.199.124
Insert 0,00 151.955 5.458 166.159 0 323.725
Update 0,00 378.161 97.884 395.814 0 486.880
Delete 0,00 389.398 332.619 415.562 0 244.495
Edited by: Srikanth Sunkara on May 12, 2011 11:50 AM -
Hi Friends
I am having performance issue for this function-module(HR_TIM_REPORT_ABSENCE_DATA) and one my client got over 8 thousend employees . This function-module taking forever to read the data. is there any other function-module to read the absences data IT2001 .
I did use like this .if i take out this F.M 'HR_TIM_REPORT_ABSENCE_DATA_INI' its not working other Function-module.please Suggest me .
call function 'HR_TIM_REPORT_ABSENCE_DATA_INI'
exporting "Publishing to global memory
option_string = option_s "string of sel org fields
trig_string = trig_s "string of req data
alemp_flag = sw_alemp "all employee req
infot_flag = space "split per IT neccessary
sel_modus = sw_apa
importing
org_num = fdpos_lines "number of sel org fields
tables
fieldtab = fdtab "all org fields
field_sel = fieldnametab_m. "sel org fields
To Read all infotypes from Absences type.
RP_READ_ALL_TIME_ITY PN-BEGDA PN-ENDDA.
central function unit to provide internal tables: abse orgs empl
call function 'HR_TIM_REPORT_ABSENCE_DATA'
exporting
pernr = pernr-pernr
begda = pn-begda
endda = pn-endda
IMPORTING
SUBRC = SUBRC_RTA
tables
absences = absences_01
org_fields = orgs
emp_fields = empl
REFTAB =
APLTAB =
awart_sel_p = awart_s[]
awart_sel_a = awart_s[]
abstp_sel = abstp_s[]
i0000 = p0000
i0001 = p0001
i0002 = p0002
i0007 = p0007
i2001 = p2001
i2002 = p2002
i2003 = p2003.
Thanks & Regards
Reddyguessing will not help you much, check with SE30 to get a better insight
SE30
The ABAP Runtime Trace (SE30) - Quick and Easy
what is the total time, what are the Top 10 in the hitlist.
Siegfried -
Change Directory server for Portal Server 6.2
Hi there,
I have the following problem with Portal Server 6.2 configuration which hopefully someone here will be able to help me with.
Basically our current setup is the Sun Portal Server 6.2, ID server 6.1 and Directory server all sitting on one (Solaris 9) box. We now wish to separate the Portal / ID server components and the Directory Server component to separate boxes. In portal server 6.0 i think there was a pssetup tool which allowed configuration of a directory server which populated it with the necessary data for portal and ID server. The directory server we will be installing to will not necessarily be a clean install, i.e. it may already be populated with data.
Is there some way therefore to re-configure the existing directory server to allow us to point our portal / ID server at it?
Thanks in advance for any help
Laurence.This can be done. You need to import the portal/identity server's schema into your new directory server and then export your existing directory server's content and import it into the new one.
-
Help, need to change IP address on host database for Portal
Hi folks,
Rather urgent assistance (as usual) needed. I have an installation working correctly on a pair of Win2k machines, one as the 9i database, one as the 9iAS/Portal. The app server has 2 NIC cards, one with public IP address (which is ok), one on the LAN. I need to reconfigure the LAN addresses on both the machines. Initial Portal install done without DNS, i.e. actual server/host addresses entered in the configuration.
I have tried changing all of the TNS/Listner settings and the NIC card IP addresses and restarting the machines. The likes of SQLPlus work ok, with the TNS connect name allowing over the LAN access into the database with the new LAN addresses. I cannot seem to get the 9iAS/Portal to find the repository with the new addresses.
Can someone help please? I can't find the answer in any documentation or other postings.
Thanks in advance
RobThere are other modes of operation for the plasst as well. I am listing them below but the formatting will make it difficult to read. If you like I can email it to you.
Bill G...
Configuring Portal when the HTTP server host name of the Infrastructure is changed
Run the following from the $ORACLE_HOME/assistants/opca dir
ptlasst.bat -mode SSOPARTNERCONFIG -i typical -sdad portal -host myApache.domain.com -port 7777 -silent -verbose
NOTE:
(1) This command would create a new Portal partner application in the SSO to reflect the changes of the Infrastructure. Before running this command please ensure to configure the SSO with the correct hostname by running the ssocfg.bat script located in the Infrastructure install (<infra_home>\sso\bin).
The value for -host parameter will be the IP address of the infrastructure server and -port will be the port where the infrastructure http server is running on.
Configuring Portal when the HTTP server host name of the Middle tier is changed
ptlasst.bat -mode MIDTIER -i typical -host myApache.domain.com -port 7777 -ldap_h myOID.domain.com -ldap_p 389 -ldap_w welcome -pwd secret123 -portal_only -oh /home/oracle -chost myHostname.domain.com -cport_i 8001 -cport_a 8000 -wc_i_pwd invalidator -mc false -mi true -silent -verbose
NOTE :
(1) The -host value should match the serverName value of the httpd.conf
(2) The -chost should be updated with the correct webcache hostname. In a default iAS midtier install the -host is same as the -chost.
The value for -host parameter will be the IP address of the midtier(portal) server and -port will be the port where the portal is running on.
Parameter Description Default Value Mandatory
-i install_type Installation Type
In the typical mode, the OPCA would get the Infrastructure information like the Portal schema name, Portal schema password, connect string to the Portal repository, SSO Partner application schema and password, SSO Password store schema and password and connect string to the SSO repository from the Repository Access API's.
In the custom mode, the OPCA would take whatever is passed as the command line arguments.
CUSTOM
-mode mode The different install modes are : PORTAL, SSO, SSOPARTNERCONFIG, LANGUAGE, MIDTIER, ALL, SYSOBJECTS , DEINSTALL
-s portal_schema Oracle Database schema for Portal database objects. In an iAS 9.0.2 install
the default Portal schema name is portal portal
-sp portal_password Password for Portal schema. In an iAS 9.0.2 install the portal schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for details. <portal_schema>
-c portal_connect Connect string to connect to the Portal repository <hostname>:<port>:<sid>
-p sys_password The Oracle Database password for the Oracle SYS user MANDATORY
-sdad portal_dad DAD for the Portal schema. Create the DAD to the Portal repository through the OEM. Refer to the note "How to create and manage the Portal and SSO DAD ?" for details. <portal_schema>
-host portal_host Hostname of the HTTP server for Portal. This should match byte to byte with whatever is present in the ServerName attribute in the $OH/Apache/Apache/conf/httpd.conf file of the midtier. MANDATORY
-port portal_port Port of the HTTP server for Portal. The Port attribute in the $OH/Apache/Apache/conf/httpd.conf file of the midtier would provide the value. 7777
-ldap_h oid_host_name Host name of the OID server MANDATORY
-ldap_p oid_port_number Port number of the OID server 389
-ldap_d oid_admin_DN Admininstration DN cn=orcladmin
-ldap_w oid_admin_pw Password for DN welcome
-pwd initial_password Initial Password for seeded OID users. In iAS 9.0.2 install this is defaulted to the iAS instance password of the midtier installation. MANDATORY (for ALL or MIDTIER)
-das_public Add Portal Groups to DAS Public Groups. The values could be Y or N. The default is Y. The setting publishes the Portal groups that the user can add to when creating the new user in OID. Y
-u default_tablespace Install Portal objects in this tablespace. The default tablespace selected should have atleast 75 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The default tablespace selected by default is users tablespace. users
-t temporary_tablespace Use this tablespace for temporary objects. The temporary tablespace selected should have atleast 20 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The temporary tablespace selected by default is temp tablespace. temp
-d document_tablespace Install Portal document table in this tablespace. The document tablespace selected should have atleast 4 MB of free available space and should have autoextend on. Refer to the note
"What are the recommended tablespace size required for Portal installation ?" for details. The documented tablespace selected by default is users tablespace. <default_tablespace>
-l logging_tablespace Install Portal logging tables in this tablespace. The Logging tablespace selected should have atleast 4 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The Logging tablespace selected by default is users tablespace. <default_tablespace>
-in index_tablespace Install Portal index in this tablespace. The Index tablespace selected should have atleast 20 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The Index tablespace selected by default is users tablespace. <default_tablespace>
-lang language Abbreviation for the language to install us
-m language_mode Specifies the mode for language installation
if sso, translations only for Login server.
if portal, translations only for Portal.
if -m not specified, translations are installed for Both
-demo Install Portal webview demos
-silent Run mode for Portal Configuration Assistant. There is no UI provided by OPCA in the iAS 9.0.2 install. Use -silent option always
-verbose Log mode for Portal Configuration Assistant. If this parameter is not set, logging information would be in brief and the OPCA would abort the install if it encounters any errors of kind
ORA-, PLS- or SP2 errors.
-report Install reports integration with Portal
-owa Install OWA packages along with Portal This option behaves the same as the SYSOBJECTS mode.
-sso_only Configure only SSO in mid-tier mode
-portal_only Configure only Portal in mid-tier mode
-available Language will be available for user translation
-chost cache_host Cache host for Web Cache <hostname>
-cport_i cache_inv_port Cahe port for Web Cache Invalidation 1100
-cport_a cache_adm_port Cahe port for Web Cache Administration 1000
-wc_i_pwd wc_inv_passwd Web Cache invalidator password invalidator
-wc wc_on_off_flag Web Cache ON/OFF flag to enable or disable WC. The default is ON. If set to OFF Portal would not use Webcache though Web Cache may be up and running. on
-o sso_schema Oracle Database schema for Login Server objects. In an iAS 9.0.2 install the default SSO schema name is orasso orasso
-op sso_password Password for Login Server Schema. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso. MANDATORY for the following modes:
-MIDTIER: except when '-portal_only' is specified
-LANGUAGE: except when '-m portal' is specified
-DEINSTALL: except when '-drop PORTAL' is specified
-odad sso_dad DAD for Login Server objects. Create the DAD to the SSO repository through the OEM. Refer to the note "How to create and manage the Portal and SSO DAD ?" for details. <sso_schema>
-sso_c sso_connect Connect string to connect to the SSO repository If the Portal and SSO use the same database this option need not be passed and would default to the -c argument. <hostname>:<port>:<sid>
-sso_h sso_host Hostname of the HTTP server for the SSO. If Portal and SSO use the same HTTP server this option need not be passed. It would default the HTTP server used for the Portal.
-sso_p sso_port Port of the HTTP server for the SSO. If Portal and SSO use the same HTTP server this option need not be passed. It would default the HTTP port used for the Portal.
-pa papp_schema SSO Partner Application Registration Schema. In an iAS 9.0.2 install the default Password store schema name is orasso_pa <sso_schema>_PA
-pap papp_password SSO PA Schema Password. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso_pa <papp_schema>
-ps pstore_schema Password Store Schema. In an iAS 9.0.2 install the default Password store schema name is orasso_ps <sso_schema>_PS
-pp pstore_password Password Store Password. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso_ps. <ptore_schema>
-pd pstore_dblink Database link from Portal schema to Password store. If the Portal and SSO use the same database this option need not be passed. <portal_schema>_DBLINK
-p_tns pstore_tns TNS connect string to Password Store. If the Portal and SSO use the same database this option need not be passed. The tnsalias should be created in the iAS 9.0.2 Portal middle tier.
-s_tns portal_tns TNS connect string to Portal
-ssotype ssotype SSO install type. Valid values are repository, midtier, all Repository
-ultrasearch Ultrasearch configuration
-drop drop_obj Drops either PORTAL or SSO or ALL (Both)
if PORTAL, drops Portal schema and OID entries.
if SSO,drops Portal schema and OID entries.
if ALL, drops Portal and SSO schema and OID entries
-oh oracle_home Oracle Home
-mi midtier_install Midtier Installation
-mc midtier_config Midtier Configuration
-ssl Use SSL protocol for configuration. Pass this parameter only if SSL configuration is required. If this parameter is passed the -port passed should also be the SSL port of the HTTP server. Bt default this is not passed.
-emhost em_host Enterprise Manager host for monitoring <hostname>
-emport em_port Enterprise Manager port for monitoring 1810
-iasname ias_name Name of the iAS instance that the install is installing on -
Abap+java stack for Portal 7.0 and MI - User Data Source
The SAP pre-requisites for Portal and MI (Mobile Infrastructure) 7.0 is an ABAP and Java Stack. If you install an AS ABAP + Java, the UME is automatically set up to use the ABAP user management of the same AS installation. What does this mean? The user store will be created in ABAP, for both the Portal and MI.
The impact of this is portal users management is in ABAP. This configuration by design cannot be connected to LDAP Active directory for user authentication.
Please let me know , if some body had already face similar issue and come up with the solution. Thanks in advance.Hi Surya ,
When you install portal or any NW component with ABAP stack , ABAP stack hold precidence over the JAVA Stack , refer to this link to have more idea on this .
http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/306bb5bc98f24f8a85d489449af456/frameset.htm--
http://help.sap.com/saphelp_nw04s/helpdata/en/12/7678123c96814bada2c8632d825443/frameset.htm
Thanx
Pankaj -
Getting import error in jsp in creating war project of masthead for portal 7.31
Hi,
I am getting error in customize masthead war project in jsp for import statement.
<%@ page import="com.sapportals.htmlb.*"%>
<%@ page import="com.sapportals.htmlb.hovermenu.*"%>
<%@ page import="com.sap.security.api.UMFactory"%>
<%@ page import="com.sapportals.portal.prt.service.license.ILicenseService"%>
<%@ taglib uri="prt:taglib:tlhtmlb" prefix="hbj"%>
I have asked basis team for jar relative to these but they have not found in system.
We are using portal 7.31 version.
Kindly help me to remove this error from jsp.
Thanks in advance.Hi Hemendra,
At first i have done this and after that even i was facing error that's why i created this thread.
Kindly check my first post for error.
Getting import error in jsp in creating war project of masthead for portal 7.31
This question is Not Answered.(Mark as assumed answered)
Swati Joshi Apr 29, 2015 12:34 PM
Hi,
I am getting error in customize masthead war project in jsp for import statement.
<%@ page import="com.sapportals.htmlb.*"%>
<%@ page import="com.sapportals.htmlb.hovermenu.*"%>
<%@ page import="com.sap.security.api.UMFactory"%>
<%@ page import="com.sapportals.portal.prt.service.license.ILicenseService"%>
<%@ taglib uri="prt:taglib:tlhtmlb" prefix="hbj"%>
I have asked basis team for jar relative to these but they have not found in system.
We are using portal 7.31 version.
Kindly help me to remove this error from jsp.
Thanks in advance.
Maybe you are looking for
-
Password protecting output file
I know this might sound crazy but is there a possibility in XI to password protect or even zip it after it has been created in the outbound file adapter?? -Ken
-
How to download Keynote for Snow Leopard?
Hi, I purchased Keynote in July and now wanted to start using it on my iMac. When I wanted to download, I had to realise that there is only a version for Mountain Lion available in the App Store. Where can I download the version for an older OS? Than
-
How to improve quality of stills exported from FCE?
Hello, I am in the habit of exporting a still from video to use on the opening screen of iDVD and the DVD label. I've noticed that the quality of the stills I'm exportng from FCE is much worse that the quality I get from iMovie from the same piece of
-
WorkflowServices.reProvision: missing user name
I am requesting a role for an account through a workflow and when I approved it, I got the error above on provisioning role approval page. Any ideas on this? Thank You. G
-
Enable advanced tagging vs. Enable Accessibility and Reflow with tagged Adobe PDF
Does anyone know the difference between these two settings in the PDFMaker preferences? Enable advanced tagging vs. Enable Accessibility and Reflow with tagged Adobe PDF I can't find any information that distinguishes these two mutually exclusive set