Performance data collection issue

Hi,
We are using SCOM 2007 r2.We have some servers not collecting performance data.These servers are up and running fine and generating alerts (Monitoring Working fine). Can any one please suggest us what is the work arround for this.
Thanks&Regards,
Padmaja M.

Try to clear management server health service cache by stopping the system center management service, renaming the health service state folder and starting the service.
Juke Chou
TechNet Community Support

Similar Messages

  • Log files/troubleshooting performance data collection

    Hello: 
    Trying to use MAP 9.0, 
    When doing performance data collection, getting errors.  Is there a log file or event log that captures why the errors are occurring?
    One posting said to look in bin\log - but there is no log directory under BIN for this version it seems.  
    Thank you, 
    Mustafa Hamid, System Center Consultant

    Hi Mark,
    There's no CLEANER_ADJUST_UTILIZATION in EnvironmentConfig for BDB JE 5.0.43 which I'm currently using, I also tried
       envConfig.setConfigParam("je.cleaner.adjustUtilization",
              "false");
    it fails to start up with below error
    Caused by: java.lang.IllegalArgumentException: je.cleaner.adjustUtilization is not a valid BDBJE environment parameter
        at com.sleepycat.je.dbi.DbConfigManager.setConfigParam(DbConfigManager.java:412) ~[je-5.0.43.jar:5.0.43]
        at com.sleepycat.je.EnvironmentConfig.setConfigParam(EnvironmentConfig.java:3153) ~[je-5.0.43.jar:5.0.43]

  • Performance Report Manager Data Collection Issues

    I have an agent running and collecting data in a circular file.... history.log
    Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
    If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
    If you can provide any information as to what to look for, please reply.

    history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
    If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
    Regards,
    Mike
    [email protected]

  • LMS 4.2 Topology Data Collection Issue

    Hi there,
    i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen". It only shows the following content from first run:
    Topology Data Collection    193    0    Not Available     Running    Schedule
    Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
    Thanks for help.

    Hi,
    i have reseted the ANI db using NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
    Everything is set to 0:
    Topology Data Collection      0 0 Not Available                          Running Schedule
    UT Major Acquisition            0 (0 End hosts 0 IP Phones) 0      Not Available Idle Schedule
    VRF Collection                    0 0                                              Not Available Idle Schedule
    But Topology Data Collection is still frozen to "Running" state....

  • LMS 3.2 Data Collection Issue

    Hi ,
    I have LMS 3.2 and license for adding 5000 devices , my data collection is running continously for the past 2 days, when i try to stop the daemon manager and restart it comes to idle state but after some time it again goes to Running state
    I am not getting the best practices deviations and discrepaqncies report after this issue
    I am attaching the ANIServer.properties , ani.log and ANIServer.log file
    Please help

    this seems to be BugID CSCtd49439:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtd49439
    also consider to install the patch for BugID CSCtg20882:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtg20882
    if you have CM 5.2 you should consider to upgrade to CM 5.2.1 which is available here:
    http://www.cisco.com/cisco/software/type.html?mdfid=282641773&flowid=5141&softwareid=280775108
    the patches for BugIDs CSCtd49439 and CSCtg20882 are availabel by contacting TAC

  • How to perform Data Collection on single SFC with QTY = 1 with material lot size 1?

    Dear experts,
    We are working with SFC qty>1 on a relaxed routing. At a given operation we want to collect the data on single quantity; i.e. SFC qty on that operation, where the collection will happen, will be 1.The corresponding material lot size is for ex 10. The operator must be able to collect data on SFC with qty=1 multiple times until the quantities will be consumed. He must be also able to collect other values on the remaining quantities on the same operation with the same DC group or other DC groups. How many times the data must be collected is dependent on the shop order build quantity. The data may be collected several time but not more than the build qty. In other words some specific data will be collected on a qty of a product while others will be collected against remaining quantity. The data collection must be also done in a serialized manner.
    Here's what we have set up so far:
    1) 3 DC groups, each DC group has 3 data fields.
    2) Each data field has the following restrictions:  Required Data Entries = 0 and Optional Data Entries = 1
    3) All DC groups are attached on the same combination of operation\material\routing
    4) we are using relaxed routing
    Process description:
    The operator must be able to collect any data field on single product. For that he will enter the operation where the data collect are attached, he will enter the SFC with qty=1 then he will run the data collection after selecting the appropriate DC Group and entering the needed information. The operator will complete the SFC with qty=1.
    The operator will pick the next product, select the same SFC and enter qty 1 and collect other value against this product.
    Problem is:
    Once the first collection is done on a given SFC with entered qty=1, the system is not allowing the operator to do further collects on the same SFC with qty=1 or any other quantity. He cannot select any DC group from the DC group list. We tried also with the table selection menu on the DC Group list but nothing can be selected.
    So we tried to play around with the DC group definitions as follows:
    A) we set Required Data Entries = 0 and Optional Data Entries = 10. Still the operator was not able to select any DC group after collecting data the first time. We tried to reopen the pod and list again. But we get the same blocking behavior.
    B) we set Required Data Entries = 10 and Optional Data Entries = 1. The operator was able to select the DC group after collecting data the first time. BUT operator must enter the data fields 10 times on one SFC quantity, which is not what we want. Besides again he cannot collect other information on remaining quantities on the same operation.
    C) There's an option to serialize the SFC before reaching the operation where the collection is happening, then merging ofter complete. Automation is needed here; hence customization. We are highly avoiding customization now, since we expect the data collect to work well on single quantities even when the main SFC has qty>1
    Questions:
    1) Are we missing any kind of further configuration\setup?
    2) Or the current system design does not allow collecting data on single quantities of an SFC which main quantity is greater than 1?
    3) Looking at this link Approaches to Collection of Data - SAP Manufacturing Execution (SAP ME) - SAP Library, there's nothing mentioned about same SFC number with multiple quantities!!!
    We are using SAP ME 15.0.3.0.
    Thanks in advance for your help
    Ali

    Ali
    to collect data for the same SFC multiple times, your system rule "Allow Multiple Data Collection" needs to be set to true for the site.
    Stuart

  • BCS - Data collection issue

    Hi,
    I'm using BCS 4.0. I'm working now in final testing and I have some question regarding to the data collection process using load from data stream method. I ran the task in consolidation monitor for 007.2007 period and for all companies without any error or warnings, but we have differences in financial information for that period.
    I reviewed the content in my BCS cube (RSA1) and we don't have any data for that accounts, the only thing that I found was that all docs were created on same date
    I deleted the ID request in RSA1in my BCS cube and I executed task again in consolidation monitor, but the result was the same.
    Looking at log / source data, in the rows listed, these data is not taking from the infoprovider
    Any idea which could be the problem ?
    Thanks
    Nayeli

    Hi Nayeli,
    I had to do this kind of job (reconciliation of data in the source basis cube and the totals cube) during the final testing a lot of times, with an accountant.
    The only way to have the first clue what is happening is to compare every particular amount s in both cubes. Comparing and trying to figure out any dependencies in data.
    The difference might arise because of ANY reason. Only you may analyze the data and decide what to do.
    AFAIU, you compared only reported data and did no currency translation and eliminations?
    Then, I'm afraid that you've made a very big mistake deleting the request from the totals cube. You have broken the consistency between totals and document data. For a transactional cube the request is yellow until the number of records in it reach 50000 records. Then it is closed and become green. As you may understand, in those 50000 records maybe contained a lot of data for different posting periods, for example, reported data for the previous closed period. Though, documents still contain eliminations for that period. - Inconsistency.

  • Interactive PDF created in CS6 InDesign data collection issue

    Created an interactive form from within CS6 InDesign. Uses text fields and check boxes with a submit button to forward the completed form to an email address. When tested in Acrobat Reader, the collected information will not be submitted, just a copy of the form -- blank. Any obvious solutions to this, perhaps a step I missed when creating in InDesign?
    Also, my submit button creates an email to send with form completed data input, and attachements too, can then be included. Is there a way to bypass the attachements step for the email and simply have an Include (browse) for attachements while within the interactive PDF?

    Which version of Adobe Reader are you using for testing purposes? Adobe Reader XI introduced the ability to save filled out PDF forms and submit them. For earlier versions as far as I'm aware you'd need to create a Reader Extended PDF, which is something you can do in Acrobat, not InDesign.
    If you have Adobe Acrobat:
    Open the PDF form you created in InDesign then
    File > Save as Other > Reader Extended PDF > Enable More Tools... and test it in Adobe Reader again.
    To answer your second question, not that I know... (neither in InDesign or Acrobat).
    However, if you have a copy of Adobe LivecycleDesigner, you can add a form object that can be used by users to include attachments.
    Cari

  • BI7 Admin Cockpit Data Collection Issue

    Hi,
    We are in BI7 SP15.
    When I run my Z query & run Query Runtime Statistics - Delta process chain i don't see any statistics data in 0TCT_C02. I activated all required objects. But if i run query in 0TCT_MC02 & run delta load i see the records in 0TCT_C02.
    I verified 'Tools - BW Statistics for Infoproviders' both 0TCT_C02 and my Zcube (also both quries) has same setting. Am i missing any steps?
    Thanks
    Ramesh

    Thanks for the reply.
    After running the delta process chain i can see only the stat data for query from 0TCT_MC21 not for my Zcube. I ran query against my Zcube but i could not see any stat records related to my Zcube queries.
    I set RSA1 - Tools - Statistics for InfoProviders for my Zcube to X & 2.
    Any help is appreciated.
    Thanks
    Ramesh

  • Data collection failing

    LMS 4.1 W2k8 R2
    I recently installed 17 stacks of 3560V2 switches at a site and added them to LMS4.1.  What I have found is that data collection is failing for all but the top switch in the stack.  In other workds, in some cabinets I may have 4 switches connected back to a 6500 core.  Data collection succeeds for only the switch connected to the core.  UT info is not collected for the switches that fail data collection.
    If I go to the device status dashboard I see that I have data collection succeeding for 56 devices and failing for 96 devices.  For the devices that fail some are listed as unreachable and others as never-reachable.  In either case, the following is suggested as a resolution:
    Verify the following :
    1. Device is reachable using ping.
    2. Verify that DCR is configured with correct credentials for the device.
    These devices are reachable.  Inventory collection is succeeding.  If I test reachability in device center I get successes across the board - even for SSH, though no username is specified in DCR so I can't see how that works.
    The 17 stacks I just installed are configured as clusters in those cabinets that have more than 1 switch.  However, they are not managed as clusters by LMS.  They all have IP addresses.  I just use clustering to facilitate bouncing around a stack from a telnet command line.
    I deleted one of these switches and re-added.  Now ping, HTTP, SSHv1 & v2 succeed in device center - but everything else fails.  When I run a credential verification job on this switch it reports SNMP read and write success, telnet & enable success, and SSH "no value to test".  The credential verification results are as I would expect.
    I am at a loss at this point.  How do I troubleshoot the data collection issue?
    -Jeff

    I found the answer to my particular problem here:
    Campus Manager and cluster-member switches

  • Data Collection

    Hi Experts,
    I am facing issue in Data collection Error in Decentralized environment.
    Earlier Data collection (Standard collection) was working normal but recently I am facing the below issue.
    If I launch Standard collection, it is getting Error out. Log file message (in Data pull Program) is Staging Tables' data is not collected. Please submit the request Planning ODS Load.
    For resolving the above, I tried the below two methods.
    1. 1st launch Planning data collection - purging staging tables then Launching Standard collection, but it is also fails with error in the program "APS Collections Miscellaneous Task". Error message : FDPSTP failed due to ORA-06512: at "APPS.MSC_UTIL", line 1192.
    2. launch Planning data collection - purging staging table, Data pull (manual launch) then Planning ODS load (manual launch). Same error message
    But, I am getting negative result.
    Hence, what is the missing setup. Is this need any profile option. or How to solve this.
    Appreciating your earlier answer.
    Regards,
    Ramesh

    Hi
    Package is Valid (I used the said query "select object_name, object_type, status from all_objects where object_name = 'MSC_UTIL'")
    Data collection issue is not resolving. Below are my tryings
    Try 1:
    1. I launched "Planning Data Collection - Purge Staging Tables" with validation = No (Later I tried with Validation = Yes also) then
    2. I launched Standard Collection (as standard way)
    Result:
    Planning ODS Load getting Error out, log file showing below error
    Exceptions posted by this request
    Concurrent Request for "Planning ODS Load" has completed with Error.
    Try 2:
    1. I launched "Planning Data Collection - Purge Staging Tables" with validation = No (Later I tried with Validation = Yes also) then
    2. I launched "Planning Data Pull" manually (Completed Normal) then
    3. I launched "Planning ODS Load" manually
    Result:
    Planning ODS Load Error out because of below
    I am getting below error message in the concurrent program "Generate Trading Partner Keys" log file.
    **Starts**27-FEB-2011 16:20:16
    ORACLE error 6512 in FDPSTP
    Cause: FDPSTP failed due to ORA-06512: at "APPS.MSC_CL_SETUP_ODS_LOAD", line 5094
    ORA-06512: at "APPS.MSC_CL_COLLECTION", line 6862
    ORA-06512: at line 1
    Appreciating your earlier reply
    Regards,
    Ramesh
    .

  • Campus Manager No Data Collected from Network

    Just intergraged CiscoWorks with ACS.  Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
    No Data Collected from Network
    1.Devices are not availiable from DCR or
    2.You have not performed data collection at least once
    When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
    We could see devices fine before the ACS intergration but now, we cannot see any devices.
    Any thoughts?

    The devices (original clients) that I defined are as follows:
    10.0.1.*
    10.0.10.*
    10.0.2.*
    I was able to see these clients.  Deleted the above clients from ACS and added:
    10.0.1-10.*
    So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
    I can still see the original clients only.  The others show up in Devices not configured in ACS report.
    What do I need to do?  What did I miss?

  • Problems with Data collection in CM 5.0.6

    Hello:
    I have installed LMS 3.0.1 and CM 5.0.6, and I have some problems with CM:
    -Although data collection is scheduled, this does not run.
    I try to launch it from CM menu, it asks if I want the collection of all devices or the new ones.
    I try the two options but it does not do anything.
    -I can launch the UT acquisition but it does not collect all the hosts.
    I compare the configuration of the devices that "works" and the others and dont see no difference.
    -The UT acquisition does not discover our Ip phones.
    -In data collection settings there are 5 devices that are included but not managed.
    -When I restart the server the data collection works fine, but the next day it doesn't work.
    Thanks!!!

    Hi,
    As suspected, Campus Manager 5.0.6 hitting a bug as found the following exception in ani.log :-
    2011/03/14 15:05:40 Discovery ani ERROR AniTimeLine: TimeBase Discovery caught exception: java.lang.NullPointerException
    java.lang.NullPointerException
        at com.objectspace.jgl.HashMap.put(HashMap.java)
        at com.cisco.nm.ani.server.core.PortDetailsXml.populatePortData(PortDetailsXml.java:109)
        at com.cisco.nm.ani.server.core.DiscoveryTimeBaseImpl.generatePortDetailsXml(DiscoveryTimeBaseImpl.java:104)
        at com.cisco.nm.ani.server.core.DiscoveryTimeBaseImpl.postPerformScheduledFunction(DiscoveryTimeBaseImpl.java:81)
        at com.cisco.nm.ani.server.frontend.AniTimeBaseImpl.execute(AniTimeBaseImpl.java:48)
        at com.cisco.nm.ani.server.frontend.AniTimeLine.executeTimeBase(AniTimeLine.java:317)
        at com.cisco.nm.ani.server.frontend.AniTimeLine.runSchedule(AniTimeLine.java:350)
        at com.cisco.nm.ani.server.frontend.AniTimeLine.run(AniTimeLine.java:366)
        at java.lang.Thread.run(Thread.java:595)
    BUG ID = CSCtd49439
    link to view bug at Cisco.com
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd49439
    You need to contact TAC for the patch.Kindly click on Action --> open Service Request and it will put all these notes and logs of this thread to the TAC case.
    Once the data collection issue will be fixed and the correct number of devices being data collected properly, then you need to make sure to add "Call Manager" to Common Services with the community string credentials and run the data collection and UT Acquisitions to get the IP Phones discovered.
    Thanks,
    Gaganjeet

  • Monitor the data collection

    How can we know if there is no data collected for a server on a specific monitor item/performance rules? Could there be an alert generated if there is no data collection from the server?

    First of all, SCOM has no built-in mechanism in keep tracking the functioanality of performance data collection. SCOM agent stores performance data in local data store, c:\porgram file\Microsoft Monitoring Agent\Agent\Health Service State\Health Service
    Store\healthserviceStore.edb. Then it will push data into SCOM DB. Once its data is transmitt to SCOM DB, its data is clear. As a result, it is not feasible to recover performance data from the client size.
    1) no data collected: Usually, a grey agent under discovered inventory indicates that the agent loss connection to managment server and performance data cannot push into SCOM DB.
    2) Database Corrupt: I think that you should recover from your backup and SCOM agent will store its performance locally until the DB is recovery.
    Roger

  • Automatic data collection evaluation issue

    We are currently evaluating several automatic data collection applications that we are planning to integrate with our Oracle Applications --- got most of the RFQ constructed using this template, http://www.highjumpsoftware.com/adc/Vertexera062503/
    but we want to make sure that all the system integration issues have been accounted for.
    Does anyone have any success stories/horror stories about integrating automatic data collection products with the ERP system
    Thank you!

    cfhttp is a good place to start.

Maybe you are looking for

  • How to email report to the users

    Hi, I have a few reports in 6i. I can preview them but cannot mail them to the users. When I click on the mail icon, it gives me this error : REP-4203: Error occurred while sending a mail message. Second option I did was to directly create a pdf repo

  • HP5502 Can't scan to computer

    Have seen previous solutions which appear easy enough. However, I dont have printer icon to click on! Suggestions please.

  • BAPI_SALESORDER_CREATEFROMDAT2 contract duration

    Hello, i create the contract with BAPI_SALESORDER_CREATEFROMDAT2 but i cannot find a field for duration of my contract (for example 2 years) can anybody help me? thanks, Sergej

  • IS THER A GOOD DLU-RAY SOFTWARE FOR MAC, I HAVE MANGO, BUT IS THERE A APPLE APP.

    IS THER A GOOD DLU-RAY SOFTWARE FOR MAC, I HAVE MANGO, BUT IS THERE A APPLE APP.

  • 0EC_PCA_ 1 and balance sheet

    Hello Everyone, I am using datasource 0EC_PCA_1 in full load.  I have created a balance sheet query (via a hierarchy).  My query is showing data incorrectly.  In incorrectly I mean the data doesn't look like it has a begining balance, so the numbers