Performance Gain for IRIX servers if Personal flag is removed from magnus.conf file.

Performance Gain for IRIX servers if Personal flag is removed from magnus.conf file.

As shipped by SGI, some of the server products have a flag set in the
magnus.conf file setting a small footprint for the servers, generally
less than 1 megabyte of memory. This flag is the Personal flag, and
looks something like:

MaxProcs 1
MinThreads 1
MaxThreads 8
Personal on

For one's own personal use, this is fine. But if CGIs are called, or
if the site sees more traffic, then the flag may need to be removed,
to look like:

MaxProcs 1
MinThreads 1
MaxThreads 8

A significant performance gain, (and a corresponding increase in
memory used), would be seen by increasing the MaxThreads, as well.

For more complete tuning recommendations on SGI/IRIX, please see SGI's
Tuning IRIX 6.2 for a Web Server page

That's a comment in the file. It has no effect at all.

Similar Messages

Does all my music stay on my MacBook Pro after I sign up for iTunes Match, or does it get removed from my Mac?

Does all my music stay on my MacBook Pro after I sign up for iTunes Match, or does it get removed from my Mac?

Hi,
It remains on your hard drive. iTunes match scans your library to determine if tracks are matched or uploaded. It does not touch the files on your hard drive. You have the option to upgrade tracks for matched versions but you need to delete tracks and download new versions.
You can camn opt to delete tracks from your library. This will free up space and you will be able to stream your music. In any event, I suggest that you back up your music to an external drive.
jim

Are there any "Best Practices" for the setting of the variables in the magnus.conf file when configuring iWS4.1 ?

The default values written to magnus.conf are suitable for most installations.
If you are interested in tuning your web server for performance, the "Performance Tuning, Sizing, and Scaling Guide" at http://docs.iplanet.com/docs/manuals/enterprise.html
has some suggestions for magnus.conf values.

Maximum Performance gain for 10g Rel 2 on Win2003

Hi All,
For a 4 CPU Widows 2003 Adv Server m/c with 10g Rel 2 , 8G RAM, SGA_TARGET = 1.4G,PGA_TARGET= 1.4G which runs Procs involving expensive queries and lots of INSERTS (ETL jobs), what should be the value of PARALLEL_MAX_SERVERS , currently I have given it as 4 (as against 80 which is the default), through the 10g DB Control dashboard I can see only 26% CPU utilization.All my data files are in just 1 partition, do I need to have more disk partitions etc.
Do advise ....how can I have the maximum perf. gain out of the setup.
Regards,
Gaurav S.

Just to add , we have implemented RAID 6 on the Server m/c (its a 8 disk 1TB hard disk)

Has the options for custom command buttons and scripts been removed from speedgrade?

I run alot of framecyclerDI machines and am looking to upgrade them but i cant seem to find any method of adding command bars and buttons like you could in the iridas versions of speedgrade i also cant see a way of executing any external scripts which for me is a big issue as i have a hell of alot of pipeline scripts that the artist could execute.... any ideas or have i just missed somthing ?.......(would love it if they added a python sdk)

Hi Dennis,
Thanks for replying,
Its actually more the other way getting speed grade to control outher things.
i.e
take the in and out points and send the track to a dcp creator
rendering and sending anotated frames directly into my databases notes system
taking the shotname and seeing if theres is a new version avaliable and pull it from the server to the local machine drive/cache
Theres a load more..but you get the idea .. using the buttons to execute these commands in the interface made these functions editor friendly...
I can get round some of the issues by reading from the autosave.ircp and setting up a PYQT GUI but that seems like a bit of a hack.
I understand the reasons to keep the UI uniform (editors dont like it when you move buttons) but Im suprised these options got removed as intergrating software into pre-existing pipelines would seem to be a selling point for any software..
Are there any plans in the roadmap for speedgrade that would help me in the future?
S.P.F

Sony bridge for mac pop up won't get removed from my macbook pro

I tried removing the Sony Ericsson Bridge for Mac app from my macbook by moving it into trash. However, I keep getting this Sony Bridge Helper Pop Up on startup. It is now getting very frustrating. Would anyone know how to completely remove this app from the mac?

Contact the app developer for their uninstallation instructions.

Where is Rescue and Recovery 4.50 for Windows 7 and why was it removed from the support site?

When Rescue and Recovery 4.51 was released a few weeks ago, all references to the previous version were replaced. Unfortunately, the new release is not supported on the R series machines nor on the earlier T series machines, so for those machines, the only version of Rescue and Recovery for Windows 7 that is available is version 4.30.0027 which was released in September 2009.
This makes no sense.
Please re-instate the documentation and download links for Rescue and Recovery 4.50 for all machines which were supported on that release but are not on version 4.51.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

Thank you for your response.
The R61 and the R500 that I own, that are currently running Windows XP are staying there until Microsoft stops supporting Windows XP, at which point I will decide what to do with them, so trying 4.51 on them is not currently an option.
As an IT professional, I tend to be the support guy for all the Lenovo computers in my family. My son also has an R500, which was purchased used, and it came with Windows 7. When I set it up for him, I installed Rescue and Recovery 4.5 over 4.3 before taking the original full system image backups. He would loose the capability to use those backups if I were to try to downgrade that machine to Rescue and recovery 4.3. My own R500 came with Rescue and Recovery 4.30.0025, (for which there is no documentation nor download links available, to my knowledge), and I have never upgraded it, because I am concerned that all my backups would become unreadable if I did. I don’t think it is worth the effort to make all the external bootable backups that upgrading the software would require. I would upgrade if I was assured that version 4.30.0027 could read the backups taken by version 4.30.0025.
There were 2 more versions of Rescue and Recovery. There was version 4.31.007 released on 2010/09/28 and version 4.31.011 released on 2011/03/04. The document ID’s for release 4.51 are the same as those for the 4.31 releases, so I should assume that Lenovo considers the 4.31 releases a major advance over the 4.30 release, and thus not a valid fallback option but why not?
The download links for Rescue and Recovery 4.31.007 are:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtvrnr431_007en.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtvrnr431_007en.exe
The download links for Rescue and Recovery 4.31.011 are:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtvrnr431_011en.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtvrnr431_011en.txt
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

Tube Map for BlackBerry 10 requesting password after being removed from device

Deleted this app from my Z10 and everything was fine.
Changed my mobile carrier from O2 to BT and now I'm getting a notification once a day from this app about my account password needing attention.
I reinstalled the app and changed all the permissions to NO and then removed the app again. Still getting the notification everyday.
Anyone know how to totally remove this 'invasive' app?

OK, I'm one of those people who switches off my mobile every night and back on in the morning.
The notification occurs either when I make the first call of the day or when I connect using Blackberry Link. Sometimes I can make a call without the notification occurring and then it happens when I connect to Link in the evening.
I have installed and removed this app twice. Neither time have I created a user account and have the settings inside the app set to location only so no personal details are allowed to be passed across. When it was installed and not set to run, even in the background, I was receiving alerts about problems on the tube system/network. My concern is that Blackberry World needs to investigate this app with regard to what it's doing without the users permission.
I have looked at the developers support website and to send an email you have to give out personal details that I'm not willing to do to a company that seems to already be obtaining data from my phoine even though it's, supposedly, been removed.
This app, under my definition, is spyware/malware. As such the security integity of my Blackberry phone is being comprimised.

Materialized views performance gain estimation

Hi;
I have to estimate the performance gain of a materialized view for a particular query without creating it.
that means, i have:
- A query with initial execution plan
- A select statement with is considered as a probable MV
i need to show what is the performance gain of creating the MV for the previous Query.
I see the DBMS_MVIEW.EXPLAIN_REWRITE but it shows the performance gain for a yet created MV.
any idea .
Thanks

Hi Bidi,
- for the first (agregation ones), i don't know how to estimate the performance gain.It's the difference in the elapsed time between the original aggregation and the time required to fetch the pre-computed summary, ususally a single logical I/O (if you index the MV).
i want to determinate the impact of creating materialized views on the performance of a workload of queries. Perfect! Real-world workload tests are always better than contrived test cases!
If you have the SQLAccess advisor, you can define a SQL Tuning Set, and run a representative benchmark with dbms_sqltune:
http://www.dba-oracle.com/t_dbms_sqltune.htm
Hope this helps. . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

Dynamic change fails for virtual servers on iplanet 6.0 RHAS2.1

iPlanet 6.0 sp8, on Red Hat Linux Advanced Server release 2.1AS
I start or stop a virtual server and try to dynamically load the changes without starting and stopping the server. It fails with :
java.lang.StackOverflowError,no description), stack: no stack trace.
It is successful, if I stop and start the server.
This also occurs from the command line using "commit".
I see it on two different machines .
Is there a fix for this ?
Here is the full text of the error:
[https-windchop-vm03]: info (23619): Installing a new configuration
[https-windchop-vm03]: failure (23619): Internal error: Unexpected error condition thrown (java.lang.StackOverflowError,no description), stack: no stack trace
[https-windchop-vm03]: failure (23619): Internal Error: Failed to initialize web application environment (web-apps.xml) for virtual server (https-windchop-vm03)
[https-windchop-vm03]: info (23619): Successfully initialized web application environment (web-apps.xml) for virtual server (https-windchop-vm03)
[https-windchop-vm03]: failure (23619): The new configuration was rejected, rolling back
[https-windchop-vm03]: failure (23619): Internal error: Unexpected error condition thrown (java.lang.StackOverflowError,no description), stack: no stack trace
[https-windchop-vm03]: failure (23619): Internal Error: Failed to initialize web application environment (web-apps.xml) for virtual server (https-windchop-vm03)
[https-windchop-vm03]: info (23619): Successfully initialized web application environment (web-apps.xml) for virtual server (https-windchop-vm03)
[https-windchop-vm03]: failure (23619): 1 subystems could not be rolled back

It's using the 1.2.2 JVM . This is a vanilla default install.
But thought I'd try changing the StackSize anyway . I added it to the magnus.conf file for the admin server and then the list of virutal servers doesn't even show up on the admin console.
Init fn=flex-init access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length%" StackSize=524288
Any other ideas? Can you recreate it? I have seen it with two default installs on RH.

Namespace prefix for Security elements being removed from SOAP Header

Hello, I'm seeing a strange problem when accessing a web service using two different Netbeans projects.
If I use a Netbeans Java Application, add the Web Client Reference , add the web client code, all works fine and the wsse:Security element looks like this:
<S:Header>
<ns4:Security xmlns:ns2="IAMP" xmlns:ns3="urn:realops.com:amp:workflow" xmlns:ns4="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<ns4:UsernameToken>
<ns4:Username>admin</ns4:Username>
<ns4:Password>admin123</ns4:Password>
</ns4:UsernameToken>
</ns4:Security>
However if I do a similar sort of thing but access the web service via a Web Application, the namespace prefix is removed from all child elements wsse:Security like so:
<S:Header>
<ns4:Security xmlns:ns2="IAMP" xmlns:ns3="urn:realops.com:amp:workflow" xmlns:ns4="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<UsernameToken>
<Username>admin</Username>
<Password>admin123</Password>
</UsernameToken>
</ns4:Security>
Which causes an authentication exception.
The question is, why, when the wsdl are exactly the same for both projects , is the namespace prefix removed from the web app?
Thanks in advance,
jsz.

Hello, I'm seeing a strange problem when accessing a web service using two different Netbeans projects.
If I use a Netbeans Java Application, add the Web Client Reference , add the web client code, all works fine and the wsse:Security element looks like this:
<S:Header>
<ns4:Security xmlns:ns2="IAMP" xmlns:ns3="urn:realops.com:amp:workflow" xmlns:ns4="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<ns4:UsernameToken>
<ns4:Username>admin</ns4:Username>
<ns4:Password>admin123</ns4:Password>
</ns4:UsernameToken>
</ns4:Security>
However if I do a similar sort of thing but access the web service via a Web Application, the namespace prefix is removed from all child elements wsse:Security like so:
<S:Header>
<ns4:Security xmlns:ns2="IAMP" xmlns:ns3="urn:realops.com:amp:workflow" xmlns:ns4="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<UsernameToken>
<Username>admin</Username>
<Password>admin123</Password>
</UsernameToken>
</ns4:Security>
Which causes an authentication exception.
The question is, why, when the wsdl are exactly the same for both projects , is the namespace prefix removed from the web app?
Thanks in advance,
jsz.

Performance counters for exchange 2013 mailbox & cas servers?

what are the Performance counters for exchange 2013 mailbox & cas servers?
similar to rpc request for troubleshooting exchange slowness, I haven't found any technet article for exchange 2013.

Hi,
Please see this:
Ask the Perf Guy: Sizing Exchange 2013 Deployments
http://blogs.technet.com/b/exchange/archive/2013/05/06/ask-the-perf-guy-sizing-exchange-2013-deployments.aspx
Hope it is what you need.
Thanks
Mavis
Mavis Huang
TechNet Community Support

RAID 1 for performance gain??

in contrast of what i would think, it seems that the OSX implementation of RAID 1 doesn't give a performance gain according to this article:
http://docs.info.apple.com/article.html?artnum=106594
since the article is very old, does anyone know whether this the info is still up to date? posts i've found in the archives indicate not..
thanks
arri

Hi arri;
If you are looking to improve performance for an application that is limited by how quickly it is able to get data from or to a disk then you want RAID 0 or striping is the solution. For those applications that are limited by disk I/O RAID 0 can help because it allows the system to do reads/writes to multiple disks in sequence overlapping them for increased performance. This is only true if the performance of the application is limited by it's access to data.
Allan

Performance Report for only Dell Windows Servers (i.e. excluding vmware boxes)

Hi,
What is the best way to get such a report?
Thx very much,
John Bradshaw

If these physical servers are in a unique OU or have a unique name, then you can make an instance group of them and run the report for those servers.
Or, find a unique key/service, create a discovery that would find that key/service, and populate a group of those computers call it Dell Servers, or whatever you want.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

How to configure email Alerts in OEM Cloud 12c for Database Servers up/down

Hi everybody,
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down status?
Regards,
Miguel Vega

Hi Miguel Vega,
Information regarding the notifications:
==============================
Configuring notification rules in 12c is different from earlier releases.
The concept and function of notification rules has been replaced with a two-tier system consisting of Incident Rules and Incident Rule Sets :
1. Incident Rules: Operate at the lowest level granularity (on discrete events) and performs the same role as notification rules from earlier releases.
By using incident rules, you can automate the response to incoming incidents and their updates.
A rule contains a set of automated actions to be taken on specific events, incidents or problems.
The actions taken are for example : sending e-mails, creating incidents, updating incidents, and creating tickets.
2. Incident Rule Set: A rule set is a collection of rules that applies to a common set of objects, for example, targets, jobs, and templates.
To help you to achieve the Notification Rules configuration, refer those notes :
How To Configure Notification Rules in 12C Enterprise Manager Cloud Control ? Doc ID 1368036.1
EM12c How to Add and Configure Email Addresses to EM Administrators and Update the Notification Schedule ?Doc ID 1368262.1
EM12c How to Subscribe or Unsubscribe for Email Notification for an Incident Rule Set ?Doc ID 1389460.1
EM 12c How to Configure Notifications for Job Executions ? Doc ID 1386816.1
Best Regards,
Venkat

Performance Gain for IRIX servers if Personal flag is removed from magnus.conf file.

Similar Messages

Maybe you are looking for