Performance issue after allowed ICMP in traffic rule
Hi All,
Today I am facing new problem in NAC environment. as per the cisco documents, I allowed all mentioned ports, fragments and ICMP to the DCs. but after enable the ICMP desktop pc is hanging on "applying computer settings" stage. If I disable ICMP rule we don't have this issue.
if anyone have any idea regarding this issue pleas share me.
here is the config
Priority
8
Action
Allow Block
State
Enabled Disabled
Category
ALL TRAFFIC IP IP FRAGMENT
Protocol
CUSTOM.. TCP UDP ICMP ESP AH
Type
ALL dst_unreachable echo echo_reply info_request info_request_reply parameter_problem redirect source_quench time_exceeded time_stamp time_stamp_reply
Untrusted (IP/Mask:Port)
/ : (ex: "*", "21,1024-1100", "1024-65535")
Trusted (IP/Mask:Port)
/ : (ex: "*", "21,1024-1100", "1024-65535")
Bandwidth
Description
Thank you
Laxman
Faisal,
sorry for wrong snap-shot, here is the exact snapshot of my config.
Thank you
Laxman
Similar Messages
-
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
Performance Issues after an Upgrade
Hello!
We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
1) What could be the causes/factors for the performance to degrade after an upgrade?
2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
Please let me know your thoughts on this.
Thanks,
- KrrishThere are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine. -
Performance issues after upgrading to 11g
hello,
We are facing a performance issue after upgrading from 10g to 11g.
as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
and oracle is using TABLE ACCESS FULL on it:
DELETE FND_ENV_CONTEXT E
WHERE NOT EXISTS
(SELECT 'X'
FROM FND_CONCURRENT_PROCESSES P
WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
AND ROWNUM < 10000;
Plan:
DELETE STATEMENT ALL_ROWSCost: 74,345
5 DELETE APPLSYS.FND_ENV_CONTEXT
4 COUNT STOPKEY
3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449
1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
15544880 07/07/2011 12:08:55
please advice.
OferPlease see these docs.
Table Fnd_env_context Growing Very Fast [ID 419990.1]
FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
Thanks,
Hussein -
Performance issue after DB copy
Hello,
I am facing performance issue after doing database copy. Let me explain entire story.
Enviornment is Oracle 10g (10.2.0.4), Operating System is Solaries.
We have one production system with DB sid (PR1) and i have to builded new system using PR1 as PR2, we have done full offline copy from one hardware to another hardware (Hardware is same on PR1 and PR2) and perform rsync command at os level to sync all oracle files at OS level(PR2 is not build using backup/restore or export import method).
Now problem is that
One of query if i am running on PR1 system it is taking only 10-15 seconds, while if i am running same query on PR2 it is taking nearly about 55-60 mins. In initial search i found SGA is very diffrent from PR1 to PR2 then i did change the SGA parameter like PR1 in PR2 after doing changes i am running same query it is taking 6-7 mins, so i got some benifit here, but still i need to tune the query. Query contains 3 tables and all tables having atleast 3-4 indexes.
Can some one help what to tune and what to check?
Thanks,
SinghCheck the explain plan on both systems to see if both instances are trying to do the same thing. This will tell you a lot about what is going on based on physical or logical reads and how long they are taking. You should have the same statistics on both databases if you did a physical copy, but check that too just to make sure. If stats and explain plan are the same, check your hardware. Do you have the same amount of RAM on both systems? Are you using similar storage? If the plan is showing that you are doing a considerable amount of physical I/Os on both it could just be that your physical disk is slower on server two.
-
Performance Issue After Moving To 11g From 9i
We have a process that inserts approximately 275,000 records into a table containing 22,000,000+ records. This process consistently runs in 1 hour and 20 minutes in our Oracle 9i Database (Standard Edition). This same process runs in 8+ hours in our Oracle 11g Database (Standard Edition) which is a copy of the Oracle 9i Database.
Both databases run on identical hardware running Windows Server 2000. The Servers each have 2 GB RAM.
We have noticed that the process in 11g slows down significantly after it has been running for about 30 minutes and is continuously consuming memory. We also ran a test in which we dropped all indexes on the table being inserted into except the primary key and the process still ran for 8+ hours again.
We executed another test in which the same process was run however we had it insert into a table that contained 0 records and our performance was better than on the 9i Database.
Any ideas on what might be causing the performance issue?Welcome to the forums !
Troubleshooting performance issues is difficult when all of the factual data is absent. Pl review these threads to identify information that you need to post in order to help you.
When your query takes too long:
HOW TO: Post a SQL statement tuning request - template posting
When your query takes too long ...
HTH
Srini -
SharePoint 2007 performance issue after upgrading the operating system
We upgraded the operating system of our SharePoint Server 2007 from 2003 to 2008 R2. After upgrade we rebuilt the SharePoint using content DBs we backed up before upgrade. All settings is same except that we moved the DBs to new SQL servers. Now users are
reporting performance issue with sites. I experienced it myself some of the pages takes 9-30 seconds to load. Also our SharePoint server is single server. I monitored the SharePoint Server and it is fine. I did fiddler trace and here are the result. I see
lots of 401 (login failed) errors then 302 (redirect) then 200 (OK). Do you know why we are getting 401 errors?
Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
184
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
341
text/html; charset=us-ascii
iexplore:15344
185
302
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
196
text/html; charset=UTF-8
iexplore:15344
186
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
341
text/html; charset=us-ascii
iexplore:15344
187
200
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
105,487
private, max-age=0; Expires: Mon, 22 Dec 2014 21:37:48 GMT
text/html; charset=utf-8
iexplore:15344
188
401
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
341
text/html; charset=us-ascii
iexplore:15344
189
200
HTTP
sp07.ourcompany.com
/_layouts/images/prevbuttonltr.gif
76
max-age=31536000
image/gif
iexplore:15344
190
200
HTTP
sp07.ourcompany.com
/_layouts/images/nextbuttonltr.gif
78
max-age=31536000
image/gif
iexplore:15344
191
200
HTTP
sp07.ourcompany.com
/_layouts/images/day.gif
1,051
max-age=31536000
image/gif
iexplore:15344
192
200
HTTP
sp07.ourcompany.com
/_layouts/images/month.gif
1,068
max-age=31536000
image/gif
iexplore:15344
193
200
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
28,814
max-age=31536000
text/css
iexplore:15344
194
200
HTTP
sp07.ourcompany.com
/_layouts/images/week.gif
1,057
max-age=31536000
image/gif
iexplore:15344
195
200
HTTP
sp07.ourcompany.com
/_layouts/images/weekbox.gif
149
max-age=31536000
image/gif
iexplore:15344
196
200
HTTP
sp07.ourcompany.com
/_layouts/images/alldayDefault.gif
157
max-age=31536000
image/gif
iexplore:15344
197
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttntoday.gif
146
max-age=31536000
image/gif
iexplore:15344
198
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttn.gif
95
max-age=31536000
image/gif
iexplore:15344Hi
when you request a Site collection (http://domain/) or a Site (http://domain/foo/) of your Publishing Site you get redirected to the http://domain/Pages/<WelcomePage>.aspx. SharePoint 2007 uses the 302 header (location temporarily moved) for
this purpose. Surprisingly even WSS uses the 302 header to redirect a root url to the default.aspx. In comparison ASP.NET uses an internal redirect to render the default page when the root url requested: there is no redirect in this situation.
Check the link which can give more input
http://blog.mastykarz.nl/sharepoint-2007-redirect-solved-using-301-instead-of-302-redirects/
for error 401 you can check this link
http://discussions.citrix.com/topic/97027-no-resources-401-unauthorized/d
and check SharePoint ULS logs and event viewer for any exceptions.
Please mark the Answer and Vote me if you think that it will help you to resolved your issue -
Performance issue after PT Upgrade.
Hakan and Team ,
We recently moved from PT 8.48 TO PT8.51.18 on CRM 8.8 Application.
After the upgrade, we tremendously saw big performance issues with PeopleSoft CRM Application. It freezes almost every day and all their work-force (call center representatives) go idle. It significantly impacts their productivity and eventually losing revenue.
can you please suggest few suggestion or DOC that will help us to improve performance on application and DB side.
Deatils :-
SQL SERVER 2005
Windows 2008 R2Hi,
Performance is always a difficult one to tackle.
It can be at so many levels, DB, Appserver, Webserver, CPU, RAM, Infra, etc.
At OOW2012, David Kurtz gave a great highly detailed presentation on this subject: CON9210 - Performance Tuning for PeopleSoft Administrators
http://www.myexpospace.com/oracle2012/smupload/scloader.cfm?SCID=257daa92-a6e8-411a-9806-2c22e56687d3
See if you can apply some of the keypoints from his presentation.
Regards,
Hakan -
Performance issues after iOS4 upgrade
hello everyone,
I had notices few issues after I upgraded my iPhone 3GS:
1- The screen is not rotating (when reading e-mails of flipping photoes).
2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
3- my Ipod is not working.
4- I could not restore my device via the itune.
my big question is there a real tangible benifit for this new upgrade?
I really appreciate if you can help me soon
thanks.There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine. -
Major performance Issues after upgrading to 10.9.2
Hi,
I have been having major performance issues almost preventing me from using the computer at times. I suspect I don't have enough memory to run Maverick as the computer was great before I upgraded.
If any experts or people with ideas for me to speed up the computer, please respond. If you think the only way to improve performance is add memory or revert back to a previous version of OSX that I have a backup for, let me know.
Here is the info on my system, thank you in advance!!
Hardware Information:
MacBook Pro (15-inch, Late 2008)
MacBook Pro - model: MacBookPro5,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 3 days 21:20:10
Disk Information:
Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
:c (disk0s2) / [Startup]: 249.2 GB (67.82 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Configuration files:
/etc/sysctl.conf - Exists
/etc/hosts - Count: 29
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.LaCie.ScsiType00 (1.2.0) Support
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.leapfrog.codeless.kext (2) Support
[not loaded] com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
[not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
[not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.leapfrog.connect.shell.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.brother.LOGINserver.plist Support
[running] com.google.keystone.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[failed] [email protected]
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
Google Chrome
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.1.18536 Support
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
OfficeLiveBrowserPlugin: Version: 12.2.9 Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.201 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.3.1.18536 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.9 Support
GarminGpsControl: Version: 2.6.4.0 Release Support
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
Dashlane: Version: 2.4.0.55923
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
Move_Media_Player: Version: npmnqmp 071705000010 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
Picasa: Version: 1.0 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Growl Support
Time Machine:
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
2% SystemUIServer
1% diskimages-helper
1% mds
0% Google Chrome Helper EH
Top Processes by Memory:
94 MB Google Chrome
59 MB GoogleSoftwareUpdateDaemon
57 MB Google Chrome Helper EH
52 MB Google Chrome Helper
39 MB Finder
Virtual Memory Information:
40 MB Free RAM
499 MB Active RAM
481 MB Inactive RAM
465 MB Wired RAM
7.33 GB Page-ins
502 MB Page-outsThe performance issues are due to third party software. Mavericks at the minimum requires 2GB's of RAM but I don't think that's the issue. And you can upgrade RAM anytime.
MacKeeper should be uninstalled. It does far more harm than good.
Do not install MacKeeper: Apple Support Communities
Uninstall instructions > how to uninstall MacKeeper
249.2 GB (67.82 GB free)
Keep an eye on available disk space.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space. Less can slow your Mac down.
You also need to uninstall CleanMyMac > How To Uninstall CleanMyMac
Third party so called Mac cleaning utilities are not necessary on a Mac. Your Mac runs maintenance in the background for you.
Mac OS X: About background maintenance tasks -
Experiencing strange performance issues after a hard drive failure - Help!
I bought my mid-2012 i5 Macbook Pro in December of 2012. I realized when shopping for computers that I wanted an SSD installed, but that it would be a lot cheaper if I bought the SSD and installed it rather than customizing it in the Apple Store. So I bought a nice Samsung 128GB SSD (820 or 840 - can't remember which) and did the installation. I went ahead and installed two 4GB sticks of RAM while I was at it. Everything was just dandy: my boot time was just under 9 seconds, and all of my data-heavy apps booted in no-time at all. Then all **** broke loose.
About two weeks ago, I opened my computer and I got the dreaded "? File Folder" notification with a gray screen. I immediately thought hard drive failure. No matter how many times I tried to boot, the computer just would not talk to the SSD anymore. I used Internet Recovery to get into my Disk Utility, and the entire partition was gone. I assumed the worst but wanted to be sure - I bought a hard drive enclosure and hooked the SSD up to an older Macbook, and lo and behold: it worked perfectly. I was not only able to recover data, but I could write data to the drive. Nothing appeared wrong with the drive when I plugged it into the old Macbook, but my newer Macbook still would not recognize it. Even my fiance's Windows 7 PC recognized the drive as "?" (since it was formatted for Mac, but hey - it recognized that it existed!).
I decided to re-install the original HDD that came with the 2012 Macbook Pro (the one I removed in favor of the SSD). I was able to re-install the OS and I can boot up at will, but everything is different. The performance issues are extremely noticeable. I can't have more than two programs running at one time without the spinning wheel of death appearing. My boot time went from 9 seconds to 2 minutes. I know that SSDs increase performance, so there is some slight performance downgrade to be expected since I am using a mechanical drive now -- but these are not normal issues. Sometimes I can't even type a web address into Safari without the wheel appearing. iTunes, and specifically the App Store, take minutes to open - and I have no media is on iTunes.
Here's the thing: I have tried just about anything to fix this problem that Google can pull up. I've verified the HDD, I've booted into Safe Mode, reset RAM and cache, run benchmarks and other performance tests, entered all sorts of weird language into Command Prompt, and studied Activity Monitor - I can't find a single red flag that would indicate anything being wrong. It appears to be a perfectly functioning, updated computer.
I'm thinking a piece of hardware failed that triggered the error with the SSD. I'm not really sure though since all of my performance tests indicate perfectly functioning hardware. I'm a little afraid to take it to the Apple store because I know they'll tell me it's my fault for opening the computer and replacing the hard drive in the first place.
Any ideas? At this point anything to salvage this computer would be helpful.Spin Cycle,
were those other computers which were able to recognize your SSD in its external enclosure also Macs? Do you know if your SSD has its most recent firmware revision installed? (If it doesn’t, its installer can be downloaded from the Samsung SSD firmware page for burning onto a bootable DVD.) I haven’t used the 830 myself, so I don’t know what its reputation is with Macs. I have an 840 PRO in my MacBook Pro, which has been trouble-free for me, but my understanding is that the 840 EVO has had trouble with Macs in its earlier firmware revisions — so I’m wondering if the 830 has a known track record with Macs, good or bad. -
DB Performance Issues after 10g Upgrade in EBS Instance
We have upgraded our Database from 9i to 10g as first part of EBS 11.5.9 to 11.5.10.2 upgrade. Currently our production is running on 11.5.9 apps with 10g DB.
Facing performance problems now. one of the them is, one Valueset query not using funcion based index while fired from the front end. but the same query when collected from SQL trace tkprofed file and executed from SQL Plus, it uses all proper indexes. We are not getting the cause of this.
Had anyone faced same kind of issues before. please suggest.
thanks,
Raj.Make sure you have all of the recommended performance patches for 11.5.9, and gather stats for SYS and SYSTEM in the following manner:
Oracle E-Business Suite Recommended Performance Patches
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=244040.1
Collecting Statistics with Oracle Apps 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=368252.1
execute dbms_stats.unlock_schema_stats('SYS');
execute dbms_stats.unlock_schema_stats('SYSTEM');
exec dbms_stats.gather_schema_stats('SYSTEM',options=>'GATHER', estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE AUTO', cascade => TRUE);
exec dbms_stats.gather_schema_stats('SYS',options=>'GATHER', estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE AUTO', cascade => TRUE);
exec dbms_stats.gather_fixed_objects_stats();
commit;
exec dbms_stats.DELETE_TABLE_STATS('SYS','X$KCCRSR');
exec dbms_stats.LOCK_TABLE_STATS('SYS','X$KCCRSR');
commit;
The last 3 commands resolve problems with RMAN, in case you are using it.
Rman Backup is Very Slow selecting from V$RMAN_STATUS
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=375386.1
Poor performance when accessing V$RMAN_BACKUP_JOB_DETAILS
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=420200.1
Troubleshooting Oracle Applications Performance Issues
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169935.1
Debugging General Performance Issues with Oracle Apps
http://blogs.oracle.com/schan/newsItems/departments/optimizingPerformance/2007/05/18#a1548
Performance Tuning the Apps Database Layer
http://blogs.oracle.com/schan/newsItems/departments/optimizingPerformance/2007/05/17#a1562
Preventing Apps 11i Performance Issues in Four Steps
http://blogs.oracle.com/schan/newsItems/departments/optimizingPerformance/2007/05/21#a1566 -
Performance issue after downgrading
Hi,
Before iam using oracle 11.1 client version to connect oracle 10.1, it was working fine,
now i downgraded client version from 11.1 to 8, now iam facing application performance issues when conecting to oracle 10.1.
what could be the reasons behind this.
Thanks.here server version is 10.1.0.2.0
so if i check by given id of metalink.
11.2.0 -not supported
11.1.0 - extended support
8.1.7 - no
8.1.6 - no
8.1.5 - no
8.0.6 - no
8.0.5 - no
but they are comfortable with 8i in performance. iam asking about performance issue. -
Huge performances issues after EHP5 upgrade
Hi All,
we are running on DB29.7 FP4 and had recently upgadedfrom ehp4 to EHP5 , we have huge performance issues, for example see below DB time difference for LP12 transactions
i have done onleline roerg of table and indexes , but no luck,
from 23-29/jan
steps TRT total TDBT DBT
LP12 3,131 6,449 2,059.8 427 136.4 52 16.5 5,962 1,904.3
30/jan-5feb
LP12 2,727 127,961 46,923.7 4,489 1,646.2 50 18.3 123,432 45,263.0
RegarsHi tthumma,
are the statistics on the DB updated regularly and completed without errors?
You can schedule easily using transaction DB13
Regards,
Valerio -
Performance issues after upgrading iPad 1 to IOS 5..
Apps open slower, lag in response and even typing gets an intermittent lag..
I have 51GB free space out of 64.. So not a space issue.
Is it an IOS5 issue with the iPad1 or could they be an upgrade issue? My iTunes hung several time during the upgrade.. So I wonder about that.
Do I try to revert back to 4 or should I stick with IOS5 and try to erase my iPad then sync over again?You can't revert back to iOS 4 officially - Apple does not support downgrades. You could try restoring your device or you could just try restarting it or resetting it if you haven't tried either of those things. I would try those things before I would restore.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
I have an original iPad and I updated and other that a little keyboard lag - which I always had anyway in every iOS that was on the device - I have had no performance issues.
Maybe you are looking for
-
Bootcamp won't allow me to partiton the drive. and won't find the key i have windows on.
-
I can't use my iPhone when charging.
I can't use my iPhone when charging.
-
i am trying to use iringtones on itunes but it isnt appearing on the left hand side of the toolbar, how do i get it to work?
-
Last week my iMac went dark (the screen) but the Power light on front was still on. I tried rebooting and there was no start-up chime and it would not come up. I disconnected all peripherals and still no joy. I reset the PRAM...no joy. I tried starti
-
Cool new lavalier Mic from RØDE
OK, these people have got it together. I already use the RØDE Podcaster for recording at my desk. I have a wired lav mic, but it is a hassle using it since, as I said, it is wired. The cost of a decent wireless mic is prohibitive. Now RØDE has come o