Performance Issue: FAT32 vs Mac OS Extended vs Mac OS Extended (Journaled)

I am new to Mac and wondered if there are any performance issues I should be aware of when formatting new external drives. Does Mac OS 10.4 process a HFS or HFS+ formatted drive better/faster than a a FAT32 formatted drive? The only reason I would format a drive FAT32 would be so that our PC can read and write to it. However, I do not know the advantage, if any, HFS+ has over HFS.

HFS+ is best for OS X. But if you want to use a drive on both a Mac and a PC, then you have to format the drive MSDOS.

Similar Messages

  • Performance Issues with Mac Mini (Late 2014)

    Dear All,
    We have few Mac Minis with below mentioned configuration in our organization.
    Mac Mini (Late 2014)
    Processor : 1.4GHz dual-core Intel Core i5 (Turbo Boost up to 2.7GHz) with 3MB on-chip shared L3 cache
    Storage : 500GB (5400-rpm) hard drive
    Memory : 4GB of 1600MHz LPDDR3 memory
    Graphics : Intel HD Graphics 5000
    Mac OS Version : 10.10.2 Yosemite
    We are using these Mac Minis for iOS application development using Xcode, but now we are facing lots of performance related issues. We are sharing issue related details with you & want to get some help to improve our system performance.
    1) System is running very slow & take a lot of time to Boot.
    2) Some time it never boots & we need to press start button several time.
    3) When system goes in Sleep mode, then it takes much time to come to display screen to type Password.
    4) Sometimes the whole screen moves Downwards.
    5) Sometimes while during coding using Xcode in Simulator it shows some kind of Error “Unexpectedly quit”
    6) Xcode runs very slow & it take lots of time in switching between files.
    7) While closing any open application it take lots of time & show activity indicator for very long time.
    8) Sometimes it doesn’t support iPad when we connect it using USB cable.
    Our development team is facing lots of issues using these Mac Minis, so please can anyone suggest us that how can we improve our system performance & is this configuration is ideal to run Mac OSx 10.10 Yosemite Series and to use it for iOS application development.
    Please try to help us to solve these issues & try to share some valuable comments on it.
    Thanks

    Dear woodmeister50,
    Here i am sharing required screenshots which you have suggested to share.
    1.  Open up activity monitor and select CPU.  Post the top 5 procersses
         and their percentage of CPU usage.
    2.  Then select Memory.  Post the values listed in the box at the bottom
         or you can post a screen shot that area.
    Please analyze these Activity monitor logs & let us know if you want to share some feedback on that. We will also try to boot & run our system in safe mode.
    Thanks

  • Mac OS X Lion and Java7 + JavaFX2.1 performance issues

    Currently I'm using the JavaFX 2.1 GA Build with Mac OS X Lion (10.7.3) on my MacBook Pro (2.33 GHz Intel Core 2 Duo, 4GB 667 MHz DDR2 SDRAM, ATI Radeon X1600 256 MB) an run into some performance and ui problems. The overall rendering framerate is arround ~30fps (which is normally 60fps on my desktop computer) and if I try to resize the main window the window starts to flicker and I get the following exception:
    Glass detected outstanding Java exception at -[GlassRunnable run]:src/com/sun/mat/ui/GlassApplication.m:163
    Exception in thread "AWT-AppKit" java.lang.NullPointerException
    at com.sun.glass.ui.mac.MacView._uploadPixels(MacView.java:72)
    at com.sun.glass.ui.View.uploadPixels(View.java:706)
    at com.sun.prism.j2d.J2DPresentable$Glass$1.run(J2DPresentable.java:99)So, how can I avoid the flickering and the performance drop? Any suggestions?

    2.1 system requirements =>
    http://docs.oracle.com/javafx/2/system_requirements_2-1/jfxpub-system_requirements_2-1.htm
    For JavaFX applications to take advantage of the new hardware acceleration pipeline provided by JavaFX, your system must feature one of a wide range of GPUs currently available in the market. Table 1 lists the graphics cards that have been tested with JavaFX. If your system does not support hardware acceleration, then JavaFX uses the Java2D software pipeline.
    For Mac OS X, the following standard Apple hardware graphics chips provide the required support:
    - Intel HD Graphics 3000 processor with 288MB of DDR3 SDRAM shared with main memory
    - AMD Radeon HD 6630M graphics processor with 256MB of GDDR5 memoryYour graphics card is not on that list, so JavaFX is falling back to a software pipeline, which does not work that well for you. You may not be able to resolve some performance issues when using a software pipline. You can log an issue at http://javafx-jira.kenai.com to request the NullPointerException be fixed - as that should not occur in any case and is a bug.

  • Illustrator CS6 mac performance issues

    Hi there,
    Ever since I've been using Illustrator CS6 on my Macbook Pro Retina, I have noticed the simple, but anoying performance issues.
    The scrolling is so laggy, it gets irritating to move arround the project.
    Is there any problem with the software? Compatibility issue perhaps? or am I doing something wrong?
    Any help will be apreciated.
    Thanks,
    Gonçalo Espinha

    Much the same....
    Clearly nobody loves retina mac users.

  • Anyone using a 12 Core Mac Pro? I have HORRIBLE performance issues .. Help!

    After the latest 10.7.4 Mac OS X update I have extremely horrible performance issues with AE ... and they were not so great before the update.
    It is still stabilizing ... but an 1:19 clip in SD is taking 12 HOURS TO analyze and stabilize. !!!
    The 12 cores are barely being used and this problem has been an issue since I purchased the suite over a year ago.
    Does anyone else have problems using AE on their 12 CORE MAC PRO?
    REPLY ONLY IF YOU HAVE A 12 CORE MAC PRO PLEASE.
    There must be a problem because since the update ... Adobe Encore is PERFECT .. and ALL 12 CORES MAX OUT and the encoding is quick!!
    I also have major problems between PP and AE using Dynamic link .. and slow renders in PP.
    Everything else works fine .. other apps / other vendors.
    I am calling Adobe today.

    Thank you for your time.
    I am using a 12 Core 2.93 GHZ with 32 GB RAAM and a NVidia GTX 285.
    I also have a Areca 1212 PCI RAID Card. ( NOTE: I HAVE A SERIOUS RAID DRIVER PROBLEM NOW. THE RAID IS DISCONNECTED )
    Mac OS X 10.7.4
    Adobe Master Suite 5.5
    The Apple "Console" app logs a whole lot of these three Adobe related errors:
    1. 5/18/12 2:10:16.260 AM aeselflink: CFURLCreateWithString was passed this invalid URL string: '/System/Library/Frameworks/System.framework' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
    2.) 5/18/12 2:10:16.331 AM aeselflink: -[NSMenu menuID]: unrecognized selector sent to instance 0x1183100e0
    5/18/12 2:10:17.333 AM aeselflink: -[NSMenu menuID]: unrecognized selector sent to instance 0x115625740
    3.) 5/18/12 2:11:18.596 AM [0x0-0x9b09b].com.adobe.aerendercore: You have at least one output module template that refers to a missing output plug-in.  Please check your Output Module Templates.
    Only half of my hyperthreaded processors are active when using AE "Warp Stabilizer". This issue was addressed before in the Forums. There was no solution. I dont' know if it is any better in CS 6.
    Also the automatic saving of all linked compositions while using the dynamic link feature bewteen PP and AE causes huge inoperatable waiting times .. unbearable. My guess is that the new "Global Performance Cache " fixes this ... which I consider update to a terrible problem .. but they sell it as a feature ( Ill go into that later.
    Question:
    What RAID card are you using?
    Do you use the Warp Stabilizer?

  • Mac Mini Performance issues

    I have a Mac Mini purchased in October 2008, lately i have seen signs of performance loss. Booting up and shutting down times have increased, opening programs have taken longer to process, and lastly copy/paste operations have increased in time. Any suggestions? PRAM, SMU have all been cleared, disk has been verified/repaired, and permissions have been verified/repaired.

    Some statistics about your Mini would be helpful in diagnosing the issue.
    1) Apple Menu > About this Mac -- what does the window that opens report?
    2) Click once on your hard drive icon, then File > Get Info
    What does it report for "Available" (that is free) space for your hard drive?
    3) Run Utilities > Activity Monitor and click on the System Memory tab
    What does it report for PageIns and PageOuts at the bottom of the window?

  • Performance issues with Imac intel 2011 27 inch..

    I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
    Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
    But I ran etrecheck.
    here are the results, please who can help me? I use this computer to edit and about everything else.
    copied:
    Problem description:
    slow start and slow quit of computer. Performance issues with fcpx and other programms.
    EtreCheck version: 2.1.8 (121)
    Report generated 6 maart 2015 21:49:31 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2011) (Technical Specifications)
        iMac - model: iMac12,2
        1 3.4 GHz Intel Core i7 CPU: 4-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6970M - VRAM: 1024 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.9.4 (13E28) - Time since boot: 0:7:46
    Disk Information: ℹ️
        WDC WD1001FALS-403AA0 disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            MacintoshHD2  (disk1s2) /Volumes/MacintoshHD2  : 999.86 GB (152.18 GB free)
        APPLE SSD TS256C disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Mitsumi Electric Hub in Apple Extended USB Keyboard
            Logitech USB-PS/2 Optical Mouse
            Mitsumi Electric Apple Extended USB Keyboard
        Western Digital Ext HDD 1021 2 TB
            EFI (disk2s1) <not mounted> : 210 MB
            datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
            prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Lexar  USB_3_0 Reader
        Seagate  Expansion Desk 3 TB
            EFI (disk3s1) <not mounted> : 315 MB
            downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
            BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
        Apple Internal Memory Card Reader
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            G-Technology G-RAID with Thunderbolt
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Toast 11 Titanium/Spin Doctor.app
        [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
            /Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
            /Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
        [not loaded]    com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [running]    com.paragon.NTFS.notify.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS4ServiceManager.plist [Click for support]
        [loaded]    com.avid.ApplicationManager.plist [Click for support]
        [loaded]    com.avid.backgroundservicesmanager.plist [Click for support]
        [loaded]    com.avid.dmfsupportsvc.plist [Click for support]
        [loaded]    com.avid.interplay.dmfservice.plist [Click for support]
        [loaded]    com.avid.interplay.editortranscode.plist [Click for support]
        [loaded]    com.avid.transcodeserviceworker.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
        [failed]    com.brother.LOGINserver.plist [Click for support] [Click for details]
        [loaded]    com.paragon.updater.plist [Click for support]
        [failed]    com.teamviewer.teamviewer.plist [Click for support] [Click for details]
        [failed]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.adobe.versioncueCS4.plist [Click for support]
        [loaded]    com.avid.AMCUninstaller.plist [Click for support]
        [running]    com.avid.interplay.editorbroker.plist [Click for support]
        [running]    com.avid.interplay.editortranscodestatus.plist [Click for support]
        [loaded]    com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
        [running]    com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
        [not loaded]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.plist [Click for support]
        [running]    com.paceap.eden.licensed.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [failed]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 537 - SDK 10.9
        OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 10.0 [Click for support]
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        Blackmagic Desktop Video  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Paragon NTFS for Mac ® OS X  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
            downloads: Disk size: 249.18 GB Disk used: 110.84 GB
        Destinations:
            G-RAID with Thunderbolt [Local]
            Total size: 8.00 TB
            Total number of backups: 6
            Oldest backup: 2014-04-08 14:24:41 +0000
            Last backup: 2014-09-24 21:58:28 +0000
            Size of backup disk: Excellent
                Backup size 8.00 TB > (Disk size 499.32 GB X 3)
    Top Processes by CPU: ℹ️
             2%    Google Chrome
             1%    WindowServer
             0%    opendirectoryd
             0%    mds
             0%    dpd
    Top Processes by Memory: ℹ️
        206 MB    mds_stores
        172 MB    com.apple.IconServicesAgent
        155 MB    Google Chrome
        137 MB    Dock
        113 MB    Google Chrome Helper
    Virtual Memory Information: ℹ️
        10.02 GB    Free RAM
        4.36 GB    Active RAM
        1.35 GB    Inactive RAM
        1.44 GB    Wired RAM
        1.24 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 6, 2015, 09:37:26 PM    Self test - passed
        Mar 6, 2015, 08:15:56 PM    /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang

    Problem description:
    disk problems
    EtreCheck version: 2.1.8 (121)
    Report generated 7 maart 2015 14:16:18 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2011) (Technical Specifications)
        iMac - model: iMac12,2
        1 3.4 GHz Intel Core i7 CPU: 4-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6970M - VRAM: 1024 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.9.4 (13E28) - Time since boot: 0:19:51
    Disk Information: ℹ️
        WDC WD1001FALS-403AA0 disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            MacintoshHD2  (disk1s2) /Volumes/MacintoshHD2  : 999.86 GB (152.18 GB free)
        APPLE SSD TS256C disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N 
        HGST HDS724040ALE640 disk2 : (4 TB)
            EFI (disk2s1) <not mounted> : 210 MB
            disk2s2 (disk2s2) <not mounted> : 4.00 TB
            Boot OS X (disk2s3) <not mounted> : 134 MB  - one error
        HGST HDS724040ALE640 disk3 : (4 TB)
            EFI (disk3s1) <not mounted> : 210 MB
            disk3s2 (disk3s2) <not mounted> : 4.00 TB
            Boot OS X (disk3s3) <not mounted> : 134 MB
    USB Information: ℹ️
        Mitsumi Electric Hub in Apple Extended USB Keyboard
            Logitech USB-PS/2 Optical Mouse
            Mitsumi Electric Apple Extended USB Keyboard
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Lexar  USB_3_0 Reader 
        Seagate  Expansion Desk 3 TB
            EFI (disk5s1) <not mounted> : 315 MB
            downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
            BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            G-Technology G-RAID with Thunderbolt
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Toast 11 Titanium/Spin Doctor.app
        [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
            /Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
            /Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
        [not loaded]    com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [running]    com.paragon.NTFS.notify.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS4ServiceManager.plist [Click for support]
        [running]    com.avid.ApplicationManager.plist [Click for support]
        [running]    com.avid.backgroundservicesmanager.plist [Click for support]
        [loaded]    com.avid.dmfsupportsvc.plist [Click for support]
        [loaded]    com.avid.interplay.dmfservice.plist [Click for support]
        [loaded]    com.avid.interplay.editortranscode.plist [Click for support]
        [loaded]    com.avid.transcodeserviceworker.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
        [failed]    com.brother.LOGINserver.plist [Click for support] [Click for details]
        [loaded]    com.paragon.updater.plist [Click for support]
        [failed]    com.teamviewer.teamviewer.plist [Click for support] [Click for details]
        [failed]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.adobe.versioncueCS4.plist [Click for support]
        [loaded]    com.avid.AMCUninstaller.plist [Click for support]
        [running]    com.avid.interplay.editorbroker.plist [Click for support]
        [running]    com.avid.interplay.editortranscodestatus.plist [Click for support]
        [loaded]    com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
        [running]    com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
        [not loaded]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.plist [Click for support]
        [running]    com.paceap.eden.licensed.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [failed]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 537 - SDK 10.9
        OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 10.0 [Click for support]
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        Blackmagic Desktop Video  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Paragon NTFS for Mac ® OS X  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
            downloads: Disk size: 249.18 GB Disk used: 110.83 GB
        Destinations:
            G-RAID with Thunderbolt [Local]
            Total size: 8.00 TB
            Total number of backups: 6
            Oldest backup: 2014-04-08 14:24:41 +0000
            Last backup: 2014-09-24 21:58:28 +0000
            Size of backup disk: Excellent
                Backup size 8.00 TB > (Disk size 499.32 GB X 3)
    Top Processes by CPU: ℹ️
             2%    WindowServer
             1%    fontd
             0%    firefox
             0%    AvidApplicationManager
             0%    AppleSpell
    Top Processes by Memory: ℹ️
        498 MB    firefox
        241 MB    mds_stores
        172 MB    com.apple.IconServicesAgent
        137 MB    Dock
        100 MB    java
    Virtual Memory Information: ℹ️
        12.33 GB    Free RAM
        2.39 GB    Active RAM
        1.11 GB    Inactive RAM
        1.34 GB    Wired RAM
        934 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 7, 2015, 01:56:19 PM    Self test - passed
        Mar 6, 2015, 08:15:56 PM    /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang

  • AFP Performance Issues

    Hi,
    I have just got my first Mac so if what I am asking is a newbie question please excuse me.
    I am trying to connect my Mac to a QNAP TS-219+ NAS using AFP, but I have noticed that the performance is unusable, on a Windows PC I can connect to a drive on the NAS almost instantly, while on my Mac it takes several minutes to connect and I also keep getting errors which seem to look like the Share/Folder is read only (lock errors, even when I try to copy a new file to the folder) where a few minutes prior everything was working fine.
    After googling I have seen reconmendations to add exclusions to my NAS for Spotlight which can slow things down to a crawl (apparently), after a lot of struggling due to the perofrmance I have managed to add all the shares to the exclusion list of the nas.
    I have also noticed that I seem to have to goto Finder and select the Server (under Shared) and a then select the Share (which as I mentioned above takes a long time to occur) after each reboot, so with all this in mind is anyone able to help with the following
    1. How can I improve the performance of connecting/using the NAS (I mentioned AFP, but I have the same performance issues when I try to connect with Smb so I am fairly confident that the problem isn't with the protocol I am uisng to ocnnect ot the nas.)
    2. How can I get the Mac to Auto Connect to the Shares on Startup
    3. How to I resolve that after a while of writing data to a share the share seems to go Read Only and the only solution seems to be to reboot Mac/NAS, I have made sure that no other devices are attached to the network, so that I can confirm I am not getting any conflicts of any kind (can't imagine why, but want to make sure)
    A quick note as I have so far been unable to get Time Machine to work with my NAS (should work, but am getting an error which I am waiting for a reply form QNAP Support on), I am currently using GoodSync File Syncronization to keep my Data backed up until I can resolve this issue, so not sure if this could be causing the problem, but again cant see why.
    Incase it helps the spec of the Mac I am running is as follows
    Mac Mini (2012 Model)
    8gb 1600mhz Ram
    2.6 ghz i7 Processor
    1TB Fusion Drive
    Thanks,
    Gavin,

    SMB can be a pita too, so don't fall in love with it.
    You might get disappointed too.
    Pita? can you be more specific?
    I am having the same dilemma, should I save and backup my files via SMB or AFP? Which is a more reliable method? I am backing up via a network Lacie Drive formatted to Fat32... And when restoring, I assume that you should always restore using the original protocol used to backup?
    *I also noticed after a recent upgrade that backups tested via SMB on my mac running osX 10.4.8 are smoother that when I try to back up via SMB on my ibook running OsX 10.3.9, were there bugs in 10.3 which prevented smooth backups via SMB?
    Thanks.

  • 21.5 Inch Performance Issues

    I don't know if it has been noted, but my 21.5 inch also has severe performance issues after a few hours of use. I can watch youtube in HD for about the first 3 hours my computer is on, but after that my whole computer will start moving ridiculously slow. The only way to temporarily fix it is to disable airport, then turn it on again.

    There are quite a few posts reporting that erasing the internal drive and re-installing Mac OS X and bundled software resolves these performance issues.
    If you want to try it, insert the included Mac OS X installation disc. Restart with the C key held down to force startup from the optical drive. When you get to the first Installer screen, go up to the menu bar and select to run Disk Utility from the Utilities menu.
    Note: If you already have personal data on this iMac that does not exist elsewhere, be sure to back it up before erasing the drive.
    In the sidebar, select the internal DRIVE, not the volume indented under the drive. Go to the Erase tab. Name the volume +Macintosh HD+ and set the format type to +Mac OS Extended (Journaled)+. Erase the drive. It should take less than one minute to complete this process.
    Quit Disk Utility to go back to Installer. Proceed with the standard installation. After it completes and restarts to the new installation, be sure to use Software Update (from the Apple menu) to pick up any updates. You may also want to run Disk Utility (while booted normally this time) and use +Repair Disk Permissions+ on the +First Aid+ tab.
    Note: If there is a separate disc for bundled software (such as the iLife suite), you will need to run that installation too, to make it like the factory installation, minus (hopefully) whatever is causing your performance issue.

  • Interested by performance issue ?  Read this !  If you can explain, you're a master Jedi !

    This is the question we will try to answer...
    What si the bottle neck (hardware) of Adobe Premiere Pro CS6
    I used PPBM5 as a benchmark testing template.
    All the data and log as been collected using performance counter
    First of all, describe my computer...
    Operating System
    Microsoft Windows 8 Pro 64-bit
    CPU
    Intel Xeon E5 2687W @ 3.10GHz
    Sandy Bridge-EP/EX 32nm Technology
    RAM
    Corsair Dominator Platinum 64.0 GB DDR3
    Motherboard
    EVGA Corporation Classified SR-X
    Graphics
    PNY Nvidia Quadro 6000
    EVGA Nvidia GTX 680   // Yes, I created bench stats for both card
    Hard Drives
    16.0GB Romex RAMDISK (RAID)
    556GB LSI MegaRAID 9260-8i SATA3 6GB/s 5 disks with Fastpath Chip Installed (RAID 0)
    I have other RAID installed, but not relevant for the present post...
    PSU
    Cosair 1000 Watts
    After many days of tests, I wanna share my results with community and comment them.
    CPU Introduction
    I tested my cpu and pushed it at maximum speed to understand where is the limit, can I reach this limit and I've logged precisely all result in graph (See pictures 1).
    Intro : I tested my E5-XEON 2687W (8 Cores Hyperthread - 16 threads) to know if programs can use the maximum of it.  I used Prime 95 to get the result.  // I know this seem to be ordinary, but you will understand soon...
    The result : Yes, I can get 100% of my CPU with 1 program using 20 threads in parallel.  The CPU gives everything it can !
    Comment : I put 3 IO (cpu, disk, ram) on the graph of my computer during the test...
    (picture 1)
    Disk Introduction
    I tested my disk and pushed it at maximum speed to understand where is the limit and I've logged precisely all result in graph (See pictures 2).
    Intro : I tested my RAID 0 556GB (LSI MegaRAID 9260-8i SATA3 6GB/s 5 disks with Fastpath Chip Installed) to know if I can reach the maximum % disk usage (0% idle Time)
    The result : As you can see in picture 2, yes, I can get the max of my drive at ~ 1.2 Gb/sec read/write steady !
    Comment : I put 3 IO (cpu, disk, ram) on the graph of my computer during the test to see the impact of transfering many Go of data during ~10 sec...
    (picture 2)
    Now, I know my limits !  It's time to enter deeper in the subject !
    PPBM5 (H.264) Result
    I rendered the sequence (H.264) using Adobe Media Encoder.
    The result :
    My CPU is not used at 100%, the turn around 50%
    My Disk is totally idle !
    All the process usage are idle except process of (Adobe Media Encoder)
    The transfert rate seem to be a wave (up and down).  Probably caused by (Encrypt time....  write.... Encrypt time.... write...)  // It's ok, ~5Mb/sec during transfert rate !
    CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
    RAM, more than enough !  39 Go RAM free after the test !  // Excellent
    ~65 thread opened by Adobe Media Encoder (Good, thread is the sign that program try to using many cores !)
    GPU Load on card seem to be a wave also ! (up and down)  ~40% usage of GPU during the process of encoding.
    GPU Ram get 1.2Go of RAM (But with GTX 680, no problem and Quadro 6000 with 6 GB RAM, no problem !)
    Comment/Question : CPU is free (50%), disks are free (99%), GPU is free (60%), RAM is free (62%), my computer is not pushed at limit during the encoding process.  Why ????  Is there some time delay in the encoding process ?
    Other : Quadro 6000 & GTX 680 gives the same result !
    (picture 3)
    PPBM5 (Disk Test) Result (RAID LSI)
    I rendered the sequence (Disk Test) using Adobe Media Encoder on my RAID 0 LSI disk.
    The result :
    My CPU is not used at 100%
    My Disk wave and wave again, but far far from the limit !
    All the process usage are idle except process of (Adobe Media Encoder)
    The transfert rate wave and wave again (up and down).  Probably caused by (Buffering time....  write.... Buffering time.... write...)  // It's ok, ~375Mb/sec peak during transfert rate !  Easy !
    CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
    RAM, more than enough !  40.5 Go RAM free after the test !  // Excellent
    ~48 thread opened by Adobe Media Encoder (Good, thread is the sign that program try to using many cores !)
    GPU Load on card = 0 (This kind of encoding is GPU irrelevant)
    GPU Ram get 400Mb of RAM (No usage for encoding)
    Comment/Question : CPU is free (65%), disks are free (60%), GPU is free (100%), RAM is free (63%), my computer is not pushed at limit during the encoding process.  Why ????  Is there some time delay in the encoding process ?
    (picture 4)
    PPBM5 (Disk Test) Result (Direct in RAMDrive)
    I rendered the same sequence (Disk Test) using Adobe Media Encoder directly in my RamDrive
    Comment/Question : Look at the transfert rate under (picture 5).  It's exactly the same speed than with my RAID 0 LSI controller.  Impossible !  Look in the same picture the transfert rate I can reach with the ramdrive (> 3.0 Gb/sec steady) and I don't go under 30% of disk usage.  CPU is idle (70%), Disk is idle (100%), GPU is idle (100%) and RAM is free (63%).  // This kind of results let me REALLY confused.  It's smell bug and big problem with hardware and IO usage in CS6 !
    (picture 5)
    PPBM5 (MPEG-DVD) Result
    I rendered the sequence (MPEG-DVD) using Adobe Media Encoder.
    The result :
    My CPU is not used at 100%
    My Disk is totally idle !
    All the process usage are idle except process of (Adobe Media Encoder)
    The transfert rate wave and wave again (up and down).  Probably caused by (Encoding time....  write.... Encoding time.... write...)  // It's ok, ~2Mb/sec during transfert rate !  Real Joke !
    CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
    RAM, more than enough !  40 Go RAM free after the test !  // Excellent
    ~80 thread opened by Adobe Media Encoder (Lot of thread, but it's ok in multi-thread apps!)
    GPU Load on card = 100 (This use the maximum of my GPU)
    GPU Ram get 1Gb of RAM
    Comment/Question : CPU is free (70%), disks are free (98%), GPU is loaded (MAX), RAM is free (63%), my computer is pushed at limit during the encoding process for GPU only.  Now, for this kind of encoding, the speed limit is affected by the slower IO (Video Card GPU)
    Other : Quadro 6000 is slower than GTX 680 for this kind of encoding (~20 s slower than GTX).
    (picture 6)
    Encoding single clip FULL HD AVCHD to H.264 Result (Premiere Pro CS6)
    You can look the result in the picture.
    Comment/Question : CPU is free (55%), disks are free (99%), GPU is free (90%), RAM is free (65%), my computer is not pushed at limit during the encoding process.  Why ????   Adobe Premiere seem to have some bug with thread management.  My hardware is idle !  I understand AVCHD can be very difficult to decode, but where is the waste ?  My computer want, but the software not !
    (picture 7)
    Render composition using 3D Raytracer in After Effects CS6
    You can look the result in the picture.
    Comment : GPU seems to be the bottle neck when using After Effects.  CPU is free (99%), Disks are free (98%), Memory is free (60%) and it depend of the setting and type of project.
    Other : Quadro 6000 & GTX 680 gives the same result in time for rendering the composition.
    (picture 8)
    Conclusion
    There is nothing you can do (I thing) with CS6 to get better performance actually.  GTX 680 is the best (Consumer grade card) and the Quadro 6000 is the best (Profressional card).  Both of card give really similar result (I will probably return my GTX 680 since I not really get any better performance).  I not used Tesla card with my Quadro, but actually, both, Premiere Pro & After Effects doesn't use multi GPU.  I tried to used both card together (GTX & Quadro), but After Effects gives priority to the slower card (In this case, the GTX 680)
    Premiere Pro, I'm speechless !  Premiere Pro is not able to get max performance of my computer.  Not just 10% or 20%, but average 60%.  I'm a programmor, multi-threadling apps are difficult to manage and I can understand Adobe's programmor.  But actually, if anybody have comment about this post, tricks or any kind of solution, you can comment this post.  It's seem to be a bug...
    Thank you.

    Patrick,
    I can't explain everything, but let me give you some background as I understand it.
    The first issue is that CS6 has a far less efficient internal buffering or caching system than CS5/5.5. That is why the MPEG encoding in CS6 is roughly 2-3 times slower than the same test with CS5. There is some 'under-the-hood' processing going on that causes this significant performance loss.
    The second issue is that AME does not handle regular memory and inter-process memory very well. I have described this here: Latest News
    As to your test results, there are some other noteworthy things to mention. 3D Ray tracing in AE is not very good in using all CUDA cores. In fact it is lousy, it only uses very few cores and the threading is pretty bad and does not use the video card's capabilities effectively. Whether that is a driver issue with nVidia or an Adobe issue, I don't know, but whichever way you turn it, the end result is disappointing.
    The overhead AME carries in our tests is something we are looking into and the next test will only use direct export and no longer the AME queue, to avoid some of the problems you saw. That entails other problems for us, since we lose the capability to check encoding logs, but a solution is in the works.
    You see very low GPU usage during the H.264 test, since there are only very few accelerated parts in the timeline, in contrast to the MPEG2-DVD test, where there is rescaling going on and that is CUDA accelerated. The disk I/O test suffers from the problems mentioned above and is the reason that my own Disk I/O results are only 33 seconds with the current test, but when I extend the duration of that timeline to 3 hours, the direct export method gives me 22 seconds, although the amount of data to be written, 37,092 MB has increased threefold. An effective write speed of 1,686 MB/s.
    There are a number of performance issues with CS6 that Adobe is aware of, but whether they can be solved and in what time, I haven't the faintest idea.
    Just my $ 0.02

  • Performance Issue for BI system

    Hello,
    We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to change the parameter abap/buffersize which was 300Mb to 500Mb. But still no major improvement is found in the system.
    There is 16GB Ram available and Server is HP-UX and with Netweaver2004s with Oracle 10.2.0.4.0 installed in it.
    The Main problem is while running a report or creating a query is taking way too long time.
    Kindly help me.

    Hello SIva,
    Thanks for your reply but i have checked ST02 and ST03 and also SM50 and its normal
    we are having 9 dialog processes, 3 Background , 2 Update and 1 spool.
    No one is using the system currently but in ST02 i can see the swaps are in red.
    Buffer                 HitRatio   % Alloc. KB  Freesp. KB   % Free Sp.   Dir. Size  FreeDirEnt   % Free Dir    Swaps    DB Accs
    Nametab (NTAB)                                                                                0
       Table definition     99,60     6.798                                                   20.000                                            29.532    153.221
       Field definition     99,82      31.562        784                 2,61           20.000      6.222          31,11          17.246     41.248
       Short NTAB           99,94     3.625      2.446                81,53          5.000        2.801          56,02             0            2.254
       Initial records      73,95        6.625        998                 16,63          5.000        690             13,80             40.069     49.528
                                                                                    0
    boldprogram                97,66     300.000     1.074                 0,38           75.000     67.177        89,57           219.665    725.703bold
    CUA                    99,75         3.000        875                   36,29          1.500      1.401          93,40            55.277      2.497
    Screen                 99,80         4.297      1.365                 33,35          2.000      1.811          90,55              119         3.214
    Calendar              100,00       488            361                  75,52            200         42              21,00               0            158
    OTR                   100,00         4.096      3.313                  100,00        2.000      2.000          100,00              0
                                                                                    0
    Tables                                                                                0
       Generic Key          99,17    29.297      1.450                  5,23           5.000        350             7,00             2.219      3.085.633
       Single record        99,43    10.000      1.907                  19,41           500         344            68,80              39          467.978
                                                                                    0
    Export/import          82,75     4.096         43                      1,30            2.000        662          33,10            137.208
    Exp./ Imp. SHM         89,83     4.096        438                    13,22         2.000      1.482          74,10               0    
    SAP Memory      Curr.Use %    CurUse[KB]    MaxUse[KB]    In Mem[KB]    OnDisk[KB]    SAPCurCach      HitRatio %
    Roll area               2,22                5.832               22.856             131.072     131.072                   IDs           96,61
    Page area              1,08              2.832                24.144               65.536    196.608              Statement     79,00
    Extended memory     22,90       958.464           1.929.216          4.186.112          0                                         0,00
    Heap memory                                    0                  0                    1.473.767          0                                         0,00
    Call Stati             HitRatio %     ABAP/4 Req      ABAP Fails     DBTotCalls         AvTime[ms]      DBRowsAff.
      Select single     88,59               63.073.369        5.817.659      4.322.263             0                         57.255.710
      Select               72,68               284.080.387          0               13.718.442             0                        32.199.124
      Insert                 0,00                  151.955             5.458             166.159               0                           323.725
      Update               0,00                    378.161           97.884           395.814               0                            486.880
      Delete                 0,00                    389.398          332.619          415.562              0                             244.495
    Edited by: Srikanth Sunkara on May 12, 2011 11:50 AM

  • Performance issues with Homesharing?

    I have a Time Capsule as the base station for my wireless network, then 2 Airport Express setup to extend the network around the house, an iMac i7 as the main iTunes Library and couple of iPads, and a couple of Apple TVs. Everything has the latest software, but I have several performance issues with Home sharing. I've done several tests making sure nothing is taking additional bandwidth, so here are the list of issues:
    1) With nothing else running, trying playing a movie via home sharing in an iPad 2 which is located on my iMac, it stops and I have to keep pressing the play button over and over again. I typically see that the iPad tries to download part of the movie first and then starts playing so that it deals with the bandwidth, but in many cases it doesn't.
    2) When trying to play any iTunes content (movies, music, photos, etc) from my Apple TV I can see my computer library, but when I go in on any of the menus, it says there's no content. I have to reboot the Apple TV and then problem fixed. I's just annoying that I have to reboot.
    3) When watching a Netflix movie on my iPad and with Airplay I send the sound to some speakers via Airplay through an Airport Express. At time I lose the connection to the speakers.
    I've complained about Wifi's instability, but here I tried to keep everything with Apples products to avoid any compatibility issues and stay within N wireless technology, which I understood it was much more stable.
    Has anyone some suggestions?

    Hi,
    you should analyze the db after you have loaded the tables.
    Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
    If yes:
    make sure your sequence caches (alter sequence s cache 10000)
    Drop all unneeded indexes while loading and disable trigger if possible.
    How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
    Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
    Is it possible using a direct load? Or do you already direct load?
    Dim

  • Performance issues with Logic Pro 9

    Hi,
    I'm experiencing quite big performance issues with Logic Pro 9:
    bad midi timing and sync, user interface is kinda slowing and less reactive, ...
    Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
    Should I upgrade to 10.6.2?
    Thanx

    Hi,
    I'm using the same machine ...
    I never get any performance issues
    I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
    so more details about your setup are required to answare!
    4GB ram???
    I suggest to check your ram!!!
    Ram must be compatible with Xeon Nehalem Try specification!
    if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
    G

  • Performance issues with Motion (position, scale, rotate) and GTX 590

    I'm experiencing performance issues with my Premiere Pro CC when I scale, position or rotate a clip in the program monitor.
    I have no performance issues with playback! It's only, when i move something with the mouse or by changing the x,y-values of Position in the Motion-Dialog in video effects.
    Premiere then lags terribly and updates the program monitor only about once per second - this makes it very difficult and cumbersome to work and position things.
    On a second Premiere installation on my laptop, performance is fine and fluid - allthough it doesn't have GPU support and is a much slower computer.
    I'm pretty sure this has somehow to do with my graphic card, which is a Nvidia GTX 590.
    I was told by the support, that it is actually a dual graphic card, which is not supported/liked by Premiere.
    The thing is, until the latest Premiere update, I did not have performance issues at all with this card.
    I also read on the forum that others with the GTX 590 did not experience any problems with it
    So where does this come from?
    There is no change in performance whether or not I activate Mercury Playback Engine GPU acceleration.
    I also tried deactivating one of the 2 gpus, but there also was no change.
    Does anyone else know this problem and has anyone a solution?
    I'm running Premiere CC on a Win 7 64bit engine, Nvidia GTX 590, latest driver (of today),

    I am suffering from the same phenomenon since I updated just before christmas, I think.
    I am hardly able to do scaling, rotating and translating in the program monitor itslef - whil motion has been highlighted in teh effect controls.
    In the effect controls I can scale, rotate etc however.
    Also I have noticed there is a yellow box with handles in teh program monitor. I remember it was white before.
    I cannot figure out what to change in my preferences. What has happened?
    best,
    Hans Wessels
    Premiere CC
    Mac Pro OSX 10.7.5
    16 GB 1066 MHz DD3
    2 X NVIDIA GeForce GT 120 512 MB

  • Short dump due to performance issue

    Hi all,
    I am facing performance issue in my sandbox. Below is the content of short dump.
    Short text
        Unable to fulfil request for 805418 bytes of memory space.
    What happened?
        Each transaction requires some main memory space to process
        application data. If the operating system cannot provide any more
        space, the transaction is terminated.
    What can you do?
        Try to find out (e.g. by targetted data selection) whether the
        transaction will run with less main memory.
        If there is a temporary bottleneck, execute the transaction again.
        If the error persists, ask your system administrator to check the
        following profile parameters:
        o  ztta/roll_area            (1.000.000 - 15.000.000)
               Classic roll area per user and internal mode
               usual amount of roll area per user and internal mode
        o  ztta/roll_extension       (10.000.000 - 500.000.000)
               Amount of memory per user in extended memory (EM)
        o  abap/heap_area_total      (100.000.000 - 1.500.000.000)
               Amount of memory (malloc) for all users of an application
               server. If several background processes are running on
               one server, temporary bottlenecks may occur.
    Pls help me to resolve this issue
    Regards,
    Kalyani
    Edited by: kalyani usa on Jan 9, 2008 9:04 PM

    Hi Rob Burbank,
    I am pasting the transaction I found in the dump
    Transaction......... "SESSION_MANAGER "
    Transactions ID..... "4783E5B027A73C1EE10000000A200A17"
    Program............. "SAPMSYST"
    Screen.............. "SAPMSYST 0500"
    Screen line......... 16
    Also i am pasting the screenshot of ST02
    Nametab (NTAB)                                                                                0
      Table definition     99,22     6.799      3.591      62,97    20.000     12.591      62,96       0    8.761
      Field definition     99,06    31.563        345       1,15    20.000     13.305      66,53     244    7.420
      Short NTAB           99,22     3.625      2.590      86,33     5.000      3.586      71,72       0    1.414
      Initial records      52,50     6.625      3.408      56,80     5.000        249       4,98     817    5.568
                                                                                    0
    program                99,58   300.000      1.212       0,42    75.000     67.561      90,08   7.939   46.575
    CUA                    99,08     3.000        211       8,84     1.500      1.375      91,67  23.050      846
    Screen                 99,46     4.297      1.842      45,00     2.000      1.816      90,80      81      963
    Calendar              100,00       488        401      85,14       200        111      55,50       0       89
    OTR                   100,00     4.096      3.281     100,00     2.000      2.000     100,00       0
                                                                                    0
    Tables                                                                                0
      Generic Key          99,69    29.297      2.739       9,87     5.000        177       3,54      57   56.694
      Single record        89,24    10.000         63       0,64       500        468      93,60     241  227.134
                                                                                    0
    Export/import          76,46    50.000     40.980      83,32     2.000                         2.676
    Exp./ Imp. SHM         97,82     4.096      3.094      94,27     2.000      1.999      99,95       0
    SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
    Roll area            0,16        432     18.672    131.072    131.072   IDs           98,11
    Page area            0,19        496    187.616     65.536    196.608   Statement     95,00
    Extended memory      9,89    151.552  1.531.904  1.531.904          0                  0,00
    Heap memory                        0          0  1.953.045          0  
      0,00
    Regards,
    Kalyani

Maybe you are looking for

  • RAR 5.2: Background Job Error

    During the Full sync jobs after installation of RAR 5.2, the User and Role jobs complete successfully, but during the profiles job it stops with an error. Please find the log entries and any tips are highly appreciated. Thanks: INFO: Job ID:7 : 7 out

  • Non-system wide DNS Lookups on RBL  (i.e. logical groups supported)

    Sun Java System Messaging Server documetation seems to state that RBL filtering can only exist in one of three files that are used for filtering based off of inbound connection IP address. My question is, can conditional execution occur for a section

  • How to block field groups instead of fields on tcode BP in SAP ECC

    Hi Experts, Does anyone know how I can block modification of entire tabs in tcode BP for a given user access role instead of down at the field level only? Example: how can I make the entire Address tab of the General Data view nonmodifiable instead o

  • Satellite L655-S5060 mouse will not scroll

    Just had to have a new hard drive installed and now the touchpad mouse will not scroll.  I don't see anything in the mouse properties to "turn it on".  I have tried updating driver and it says it is up to date.  Windows 7.  Thanks in advance! Solved!

  • Unable to view conversation pictures in specific c...

    Using the newest version of Skype (7.0.0.102), in most group conversations, I am able to change the concersation picture and have it update immediately. However, in others, attempting to change the picture results in no change on my end. One user in