Performance issue: Follow up transaction creation taking too much time

hi,
i am facing an issue where whenever a user tries to create a follow-up Quote from an opportunity, it is taking more than 7-8 secs...can someone help me understand its a standard time or ways to reduce the time taken.
we have already implemented SAP's go-live recommendations on basis side of tune up.
thanks
RH

Hello,
Performance could be either at client/server due to the following
--> Processing(including rendering time)
--> Memory
One needs to analyze the which is the cause and then find a solution.
Hope this helps
Regards
Pramodh

Similar Messages

Full DTP taking too much time to load

Hi All ,
I am facing an issue where a DTP is taking too much time to load data from DSO to Cube via PC and also while manually running it.
There are 6 such similar DTP's which load data for different countries(different DSO's and Cubes as source and target respectively) for last 7 days based on GI Date. All the DTP's are pulling almost same no. of records and finish within 25-30 min. But only one DTP takes around 3 hours. The problem started couple of days back.
I have change the Parallel processes from 3->4->5 and packet size from 50,000->10,000->1.00.000 but no improvement. Also want to mention that all the source DSO's and target Cubes have the same structure. All the transformations have Field Routines and End Routines.
Can you all please share some pointers which can help.
Thanks
Prateek

HI Raman ,
This is what I get when I check the report. Can this be causing issues as 2 rows have % >= 100
ETVC0006           /BIC/DETVC00069     rows:      1.484    ratio:          0 %
ETVC0006           /BIC/DETVC0006C     rows: 15.059.600    ratio:        103 %
ETVC0006           /BIC/DETVC0006D     rows:        242    ratio:          0 %
ETVC0006           /BIC/DETVC0006P     rows:         66    ratio:          0 %
ETVC0006           /BIC/DETVC0006T     rows:        156    ratio:          0 %
ETVC0006           /BIC/DETVC0006U     rows:          2    ratio:          0 %
ETVC0006           /BIC/EETVC0006      rows: 14.680.700    ratio:        100 %
ETVC0006           /BIC/FETVC0006      rows:          0    ratio:          0 %
ETVC0007           rows: 13.939.200    density:              0,0 %

SAP GUI taking too much time to open transactions

Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
Ramesh

Hi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I having issue with my Iphone 4 while playing music its taking too much time to play

I am using Iphone which is taking too much time to play music & some time its shows one album cover and playing others song please help and let me know whats the issue

Hello Sanjay,
I would recommend steps 1, 3, and 5 from our iPhone Troubleshooting Assistant found here: http://www.apple.com/support/iphone/assistant/phone/#section_1
Here is step 1 to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
Take care,
Sterling

System Taking too much time in transaction j1i5

Hi,
While updating my RG1 Register system taking too much time (4 hours for 10 items).So how I can solve this problem?
Pleasse explain detail procedure?

Dear Lalit,
It may be related to technical problem like Net work etc.. so take help of the BASIS people they may help you on that.
I hope it will help you
Regards,
Murali.

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

Importing is taking too much time (2 DAYS)

Dear All,
I'm Importing below support packages together in a queue @ SAP Solution manger 4 .
SAPKB70015             Basis Support Package 15 for 7.00
SAPKA70015             ABA Support Package 15 for 7.00
SAPKITL426             ST 400: Patch 0016, CRT for SAPKB70015
SAPKIBIIP6             BI_CONT 703: patch 0006
SAPKIBIIP7             BI_CONT 703: patch 0007
SAPKIBIIP8             BI_CONT 703: patch 0008
SAPK-40010INCPRXRPM    CPRXRPM 400: patch 0010
SAPK-40011INCPRXRPM    CPRXRPM 400: patch 0011
SAPK-40012INCPRXRPM    CPRXRPM 400: patch 0012
SAPKIPYJ7E             PI_BASIS 2005_1_700: patch 0014
SAPKW70016             BW Support Package 16 for 7.00
importing is taking too much time (2 DAYS) in main import phase, I have seen SLOG, there are many rows " I am waiting 1 sec and 6 sec . and also checked transaction code STMS all support packages imported except one support package "SAPKW70016 "
Please advice.
Best Regards'
HE

Hello Mohan,
The DBTABLOG table does get large, the best is to switch off logging. If that's not possible, increase the frequency of your delete job, also explore one more alternative have a look at the archival object: BC_DBLOGS, you could archive old records (in accordance with your customer's data retention policies) to reduce the size of the table.
Also, have a look at the following notes, they will advise you on how to improve the performance of your delete job:
Note 531923 - Audit Trail: Indexes on table DBTABLOG
Note 579980 - Table logs: Performance during access to DBTABLOG
Regards,
Siddhesh

Code taking too much time to output

Following code is taking too much time to execute . (some time giving Time_out )
ind = sy-tabix.
    SELECT SINGLE * FROM mseg INTO mseg
       WHERE bwart = '102' AND
             lfbnr = itab-mblnr AND
             ebeln = itab-ebeln AND
             ebelp = itab-ebelp.
    IF sy-subrc = 0.
      DELETE itab INDEX ind.
      CONTINUE.
Is there any other way to write this code to reduce the output time.
Thanks

Hi,
I think you are executing this code in a loop which is causing the problem. The rule is "Never put SELECT statements inside a loop".
Try to rewrite the code as follows:
* Outside the loop
SELECT *
from MSEG
into table lt_mseg
for all entries in itab
where bwart = '102' AND
lfbnr = itab-mblnr AND
ebeln = itab-ebeln AND
ebelp = itab-ebelp.
Then inside the loop, do a READ on the internal table
Loop at itab.
read table lt_mseg with key bwart = '102'. "plus other conditions
if sy-subrc ne 0.
delete itab. "index is automatically determined here from SY-TABIX
endif.
endloop.
I think this should optimise performance. You can check your code's performance using SE30 or ST05.
Hope this helps! Please revert if you need anything else!!
Cheers,
Shailesh.
Always provide feedback for helpful answers!

Delete query taking too much time

Hi All,
my delete query is taking too much time. around 1hr 30 min for 1.5 lac records.
Though I have dropped mv log on the table & disabled all the triggers on it.
Moreover deletion is based on primary key .
delete from table_name where primary_key in (values)
above is dummy format of my query.
can anyone please tell me what could be other reason that query is performing that slow.
Is there anything to check in DB other than triggers,mv log,constraints in order to improve the performance?
Please reply asap.

Delete is the most time consuming operation, as the whole record data has to be stored at the undo segments. On the other hand, there is a part of the query used to select records to delete that probably is adding an extra overhead to the process, the in (values) clause. It would be nice on your side to post another dummy from this (values) clause. I could figure out this is a subquery, and in order for you to obtain this list you have to run a inefficient query.
You can gather the execution plan so you can see where the most heavy part of th query is. This way a better tuning approach and a more accurate diagnostic can be issued.
~ Madrid.

Query is taking too much time

hi
The following query is taking too much time (more than 30 minutes), working with 11g.
The table has three columns rid, ida, geometry and index has been created on all columns.
The table has around 5,40,000 records of point geometries.
Please help me with your suggestions. I want to select duplicate point geometry where ida=CORD.
SQL> select a.rid, b.rid from totalrecords a, totalrecords b where a.ida='CORD' and b.idat='CORD' and
sdo_equal(a.geometry, b.geometry)='TRUE' and a.rid !=b.rid order by 1,2;
regards

I have removed some AND conditions That was not necessary. It's just that Oracle can see for example that
a.ida='CORD' AND
b.idat='CORD' AND
a.rid !=b.rid AND
sdo_equal(a.geometry, b.geometry)='TRUE'
ORDER BY 1,2;if a.ida does not equal 'CORD', the whole set of conditions evaluates to FALSE, so Oracle will not bother evaluating the rest of the conditions because it's all AND'ed together, and TRUE AND FALSE = FALSE.
So if you place your least expensive conditions first (even though the optimizer can and will reorder conditions) this will give you a small performance benefit. Too small to notice, but on 5.4 million records it should be noticable.
and I have set layer_gtype=POINT.Good, that will help. I forgot about that one (Thanks Luc!).
Now i am facing the problem to DELETE duplicate point geometry. The following query is taking too much time. What is too much time? Do you need to delete these duplicate points on a daily or hourly basis? Or is this a one-time cleanup action? If it's a one-time cleanup operation, does it really matter if it takes half an hour?
And if this is a daily or even hourly operation, then why don't you prevent the duplicates from entering the table in the first place? That will save you from having to clean up afterwards. Of course, this might not be possible with your business requirements.
Lastly: can you post an explain plan for your queries? Those might give us an idea of what is taking so much time. Please enclose the results of the explain plan with
[ c o d e ]
<code/results here>
[ / c o d e ]
that way the original formatting is kept and it makes things much easier to read.
Regards,
Stefan

Transport in BI-Production taking too much time.

Hi Experts,
Whenever I am transporting from BQA to BPA its taking too much time i.e 4-5 hours for 1 transport. The system is newly built i.e the BI-PRD system. Sgen has been performed and all the post installation activities too.
Can anyone help?

Hi Santanu,
I believe the transports are getting imported, but it is taking much time. So, I believe RDDIMPDP job is already scheduled.
Please let us know the transport log if the issue persists.
Regards,
Sujit.

Sites Taking too much time to open and shows error

hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.

This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful.

Taking too much time in Rules(DTP Schedule run)

Hi,
I am Scheduling the DTP which have filters to minimize the load data.
when i run the DTP it is taking too much time in the "rules" (i can see the DTP monitor ststus package by pakage and step by step like "Start routine" "rules" and "End Routine")
here it is consuming too much time in Rules Mapping.
what is the problem and any solutions please...
regards,
sree

Hi,
Time taken at "rules" depends on the complexity involved there in ur routine. If it is a complex calculation it will take time.
Also check ur DTP batch settings, ie how many no. of background processes used to perform DTP, Job class.
U can find these :
goto DTP, select goto menu and select "Settings for Batch Manager".
In the screen increase no of Processes from 3 to higher no(max 9).
ChaNGE job class to 'A'.
If ur DTP is still running , cancel it ie Kill the DTP, delete from the Cube,
Change these settings and run ur DTP one more time.
U can observer the difference.
Reddy

Performance issue: Follow up transaction creation taking too much time

Similar Messages

Maybe you are looking for