Performance Issue in Order.jsp

Hi Folks,
I am facing a performance issue in the CRM system. When I try to transfer 500 items from the Product catalog to the order, it takes around 8 mins.
The expectation is max of 1 min.
We are performing the ATP check via ECC and pricing via IPC. I would like to have your suggestions as to how I could improve this performance.
Thanks.
Deepika

Frankly, you may never be able to achieve that kind of benchmark.
But it is still worthwhile to trace for performance. Check the time taken by the (ABAP calls) components in the "Add to basket" action. The ISA runtime log will be very useful. Perform ABAP trace in the backend ST03, ST05 etc.
If you have not seen this note check if this is relevant.
Note 1089043 - Performance and memory problems in SAP E-Commerce
See if this note is relevant too
Note 1150302 - Deactivating IPC communication in Web catalog of Web shop
A different question,
What is this business scenario that expects a customer to select 500 catalog items in one shot and transfer to the basket. To me, it looks very highly unlikely scenario - unless you want to explain
If this is a kind of customerr specific view and you expect the customers to select all of the items in their view and load in one shot, you can design upload capability with ofline order create.
Easwar Ram
http://www.parxlns.com

Similar Messages

Performance issue with ORDER BY

The following query runs in 60 milli sec with no order by clause. With order by it takes about 3 sec. The end result of the query is 25 records. One thing we noticed is order by is taking place after the union irrespective where we place the order by clause. Not sure how to make oracle perform order by on end result. Any thoughts truly appreciated.
SELECT *
FROM
(SELECT ROWNUM as R,
STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
TYPE_ID,
QUEUE,
FALLOUTREASON,
START_DT,
NOTIF_CREATE_DT,
ACCT_NUM,
ADSLTN,
SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM
(SELECT *
FROM
(SELECT *
FROM
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
S.TYPE_ID,
QUEUE,
null FALLOUTREASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM,
ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='2' AND SUB_TYPE_ID='2' AND status not in ( 'Terminated','Complete') ) T,
SOEG_CRM S
WHERE t.activity_id= s.activity_id
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
null INSTALL_TYPE,
null CUSTOMER_TYPE,
TYPE_ID,
QUEUE,
'Review Letters for Printing' FALLOUT_REASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM,
null ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='3' AND status not in ( 'Terminated','Complete') ) T
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
op.TYPE_ID,
QUEUE,
FALLOUT_REASON,
START_DT,
NOTIF_CREATE_DT,
ACCT_NUM,
ADSLTN,
SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='1' AND SUB_TYPE_ID='1' and status not in ( 'Terminated','Complete') ) T,
OPNOTES OP
WHERE t.activity_id= op.activity_id
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
a.TYPE_ID,
QUEUE,
null FALLOUTREASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM ,
ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='2' AND SUB_TYPE_ID='1' and status not in ( 'Terminated','Complete') ) T,
AELERA a
WHERE t.activity_id= a.activity_id
WHERE (PERFORMER_DN = 'cadmin1'
OR SUPERVISOR_DN in ('Address_Issues','PROCESSED','SG_EOSN','Test_Queue','Test_Queue_P','BUTST1','BUTST2','BU_UNAS','DATAR','PST','PST_ME','SVC','SVC_EX','SVC_ME','TEST_2_LETTER_QUEUE','TEST_2_OP_ESC_QUEUE','TEST_2_PROV_ESC_QUEUE','TEST_3','Test_4','Test_6','Test_8','test_5_LETTER_QUEUE','test_5_OP_ESC_QUEUE','test_5_PROV_ESC_QUEUE','cadmin1'))
AND ((STATUS = 'Pending'
AND PERFORMER_DN = QUEUE)
OR STATUS = 'Suspended'
OR STATUS = 'Acquired'
OR (STATUS = 'Pending'
AND PERFORMER_DN <> QUEUE))
AND (TYPE_ID = '2'
OR TYPE_ID = '3')
--order by priority
WHERE R >= 1
and R < 26
--order by priority
Here is the explain plan
19 SELECT STATEMENT
18 . VIEW
17 SORT [ORDER BY]
16 COUNT
15 . VIEW
14 UNION-ALL
4 NESTED LOOPS
1 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
3 APPL.SOEG_CRM TABLE ACCESS [BY INDEX ROWID]
2 APPL.XPK_SOEG_CRM INDEX [UNIQUE SCAN]
5 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
9 NESTED LOOPS
6 APPL.BSOMS_OPNOTES TABLE ACCESS [FULL]
8 APPL.TASK_ACTIVITY TABLE ACCESS [BY INDEX ROWID]
7 APPL.XPKTASK_ACTIVITY INDEX [UNIQUE SCAN]
13 NESTED LOOPS
10 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
12 APPL.AELERA TABLE ACCESS [BY INDEX ROWID]
11 APPL.XPK_AELERA INDEX [UNIQUE SCAN]

Hi,
I must admit, that I didn't read your whole query, but did you try to use a subselect?
Select a.* from (your_query) a
order by a.priorityBTW: Don't use SELECT *
Dim

Sale Order Performance Issue.

Hi,
We are using EBS 12.0.6 and Database is 10g (10.2.3).
We are facing performance issue with "Order management Sale Order Form",
When user click on "Line Items" Tab of "Sale Order Form" and
In "Main" Tab entring the "Ordered Item" then press tab and entring the "Qty" of item, its takes time 20 to 30 Second for one item if its related Items exists.
We have 150 entiries against one sale order. Users are facing 20-30 second delay on each entry.
Please advise how to improve the performance when related Itms exists?
Thanks,
Edited by: user12007410 on Feb 4, 2010 12:00 AM

Pl create a trace file as outlined in MOS Doc 564817.1 (How To Create Forms And Database Level Trace For Receiving Transactions) to help pinpoint what SQL is causing the issue. Then open an SR as this may be a known issue for which a patch exists.
Pl also verify that database statistics are current - see MOS Doc 169935.1 (Troubleshooting Oracle Applications Performance Issues) - section on "Statistics Gathering"
HTH
Srini

EBS 12.0.6 Sale Order Performance Issue.

We are using EBS 12.0.6 and Database is 10g (10.2.3).
We are facing performance issue with "Order management Sale Order Form",
When user click on "Line Items" Tab of "Sale Order Form" and
In "Main" Tab entring the "Ordered Item" then press tab and entring the "Qty" of item, its takes time 20 to 30 Second for one item if its related Items exists.
We have 150 entiries against one sale order. Users are facing 20-30 second delay on each entry.
Please advise how to improve the performance when related Itms exists?

Hi,
Please see if these documents are applicable.
Note: 845765.1 - R12: Performance Navigating To Line Item Tab: OE_AK_SOLD_TO_ORGS_V [ID 845765.1]
Note: 399998.1 - OEXOEORD: Performance Entering Item On A Sales Order Line
Regards,
Hussein

Order Management Performance Issue

In the Oracle Applications home page, when I login as OM Super User and for order to cash functionality, when I click on Order, Returns > Quick Sales Orders screen, it takes forever to load. When I reboot my client desktop PC machine, it loads quickly.
Any ideas how to solve this performance issue for Order Management Quick Sales?
We are running Oracle 12.1.1 EBS on Linux 64 bit OS platform.

Hi,
Please see if these documents are applicable.
Note: 845765.1 - R12: Performance Navigating To Line Item Tab: OE_AK_SOLD_TO_ORGS_V [ID 845765.1]
Note: 399998.1 - OEXOEORD: Performance Entering Item On A Sales Order Line
Regards,
Hussein

ERP Sales Order : Performance issues with Product Proposal

Hi
we are working on CRM 2007 solution and are facing serious performance issues with the ERP Sales Order functionality provided in the ICWC of this version.
In our development we are adding items in the ERP cart as soon as the user clicks on the 'New Sales Order' button of the sales order sreen. We get the items by very simple and optimized call to the ERP system and then add these entities in the Item Cart (Item collection ...in simple sense).
For adding 10 items the application takes 10 seconds and this is too much for adding just 10 items.
Can you please provide any Notes/alternative solution to resolve this issue.
Regards
Ajitabh

Hi Ajithabh,
Please apply the following SAP notes:
1061423 - Interaction Center ERP Order Performance improvement
1262277 - Performance: CRM value help causes dumps in ERP
1292817 - Performance: Reduce RFC calls during creation of ERP order.
1319885 - ERP sales order search with external reference
1326527 - Reducing number of RFC calls in IC ERP Sales Order
I hope it helps!
Regards,
Gabriel Santana

RKKBABS0 Performance Issues (Background Processing of CO99) for PM Orders

We are experiencing extremely long run times when batch processing through program RKKBABS0 in ECC 6.0 (just upgraded). The issue appears to be that the program is using the production order numbers to search against the EXKN table which contains no AUFNR or AUFPL information.
Has anyone experienced this same issue and how was it resolved?
Edited by: Ken Lundeen on Apr 9, 2010 9:17 PM
Edited by: Ken Lundeen on Apr 9, 2010 9:17 PM Table ESKN

(I'm sorry you've waited over a year for a reply.)
We also have performance issue. In our case we do not use Service Entry sheets with maintenance or production orders; AUFNR will not be populated in table ESKN. We are unable to 'complete business' our maintenance and production orders using batch processing because of performance.
We use Oracle database, which uses full table scan in this situation. But Secondary index (MANDT and AUFNR) is of no value anyway, we have about 12 million records with client and blank AUFNR field.
Our solution is a combination of a modification and a new index. OSS pilot note "1532483 - Performance of RKKBABS0 CHECK_ENTRYSHEET when reading ESKN" is a modification which introduces code improvements especially if running in background and closing several orders. Because we only have one client, we also created a new index consisting only of AUFNR. Oracle will not add a row to the secondary index of all fields of the index are null, making our new index very small. We then udpated Oracle stats to ensure Oracle would choose our new index.
We can now 'complete business' a single order online in under a minute, and the batch program runs much more efficiently.
This is not a perfect solution, but it has been a useful workaround for us. I hope this is useful to you.

Performance issue on LOV in JSP

Hi,
In my JSP application, I used two LOV for look up. One of them will show about 3,000 and so records. When I clicked the LOV button for this LOV, it took me more than 20 seconds to see the result. This is unacceptable. Is there anyone know how I can tune the BC4J framework to improve performance? Your any input will be highly appreciated.
Rick
null

On many projects I've worked on, including non-JDev, a general user interface rule was that you don't use an LOV if there's much more than 20-30 items. Think of this from a USER standpoint.
Note also that in Swing/DACF the combobox does NOT allow you to type the letters "starting" and automatically jump to the right place.. ( i.e. Enter WI in a state list doesn't take you to WISCONSIN ). This is a Sun JDK issue. ( Or has it changed in 1.3 in some manner... or is there a property set to allow this? )
As such, you've more a application design issue than a performance issue.
Good Luck
null

Jsp performance issue on Safari

Hi,
We are facing performance issues while loading a jsp page in Safari browser on Macintosh.It takes around 2 minutes to load.
The same page used to take around 5 seconds on Netscape on Macintosh.
Have anyone faced a similar issue?
I'm new to jsp, so could you please provide some tips on how we can debug what is causing the issue and tune this?
Thanks,
Mini

On many projects I've worked on, including non-JDev, a general user interface rule was that you don't use an LOV if there's much more than 20-30 items. Think of this from a USER standpoint.
Note also that in Swing/DACF the combobox does NOT allow you to type the letters "starting" and automatically jump to the right place.. ( i.e. Enter WI in a state list doesn't take you to WISCONSIN ). This is a Sun JDK issue. ( Or has it changed in 1.3 in some manner... or is there a property set to allow this? )
As such, you've more a application design issue than a performance issue.
Good Luck
null

Report Performance Issue - Activity

Hi gurus,
I'm developing an Activity report using Transactional database (Online real time object).
the purpose of the report is to list down all contacts related activities and activities NOT related to Contact by activity owner (user id).
In order to fullfill that requirment I've created 2 report
1) All Activities related to Contact -- Report A
pull in Acitivity ID , Activity Type, Status, Contact ID
2) All Activities not related to Contact UNION All Activities related to Contact (Base report) -- Report B
to get the list of activities not related to contact i'm using Advanced filter based on result of another request which is I think is the part that slow down the query.
<Activity ID not equal to any Activity ID in Report B>
Anyone encountered performance issue due to the advanced filter in analytic before?
any input is really appriciated
Thanks in advanced,
Fina

Fina,
Union is always the last option. If you can get all record in one report, do not use union.
since all records, which you are targeting, are in the activity subject area, it is not nessecery to combine reports. add a column with the following logic
if contact id is null (or = 'Unspecified') then owner name else contact name
Hopefully, this is helping.

Returning multiple values from a called tabular form(performance issue)

I hope someone can help with this.
I have a form that calls another form to display a multiple column tabular list of values(needs to allow for user sorting so could not use a LOV).
The user selects one or more records from the list by using check boxes. In order to detect the records selected I loop through the block looking for boxes checked off and return those records to the calling form via a PL/SQL table.
The form displaying the tabular list loads quickly(about 5000 records in the base table). However when I select one or more values from the table and return back to the calling form, it takes a while(about 3-4 minutes) to return to the called form with the selected values.
I guess it is going through the block(all 5000 records) looking for boxes checked off and that is what is causing the noticeable pause.
Is this normal given the data volumes I have or are there any other perhaps better techniques or tricks I could use to improve performance. I am using Forms6i.
Sorry for being so long-winded and thanks in advance for any help.

Try writing to your PL/SQL table when the user selects (or remove when deselect) by usuing a when-checkbox-changed trigger. This will eliminate the need for you top loop through a block with 5000 records and should improve your performance.
I am not aware of any performance issues with PL/SQL tables in forms, but if you still have slow performance try using a shared record-group instead. I have used these in the past for exactly the same thing and had no performance problems.
Hope this helps,
Candace Stover
Forms Product Management

Performance issues with pipelined table functions

I am testing pipelined table functions to be able to re-use the base_query function. Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? The processor function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
 TYPE resultset_typ IS REF CURSOR;
 TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
 TYPE table_typ IS TABLE OF row_typ;
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ;
 c_default_limit CONSTANT PLS_INTEGER := 100;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ
 IS
 o_resultset resultset_typ;
 BEGIN
 OPEN o_resultset FOR
 SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB;
 RETURN o_resultset;
 END base_query;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
 IS
 aa_source_data table_typ;-- := table_typ ();
 BEGIN
 LOOP
 FETCH p_source_data
 BULK COLLECT INTO aa_source_data
 LIMIT p_limit_size;
 EXIT WHEN aa_source_data.COUNT = 0;
 /* Process the batch of (p_limit_size) records... */
 FOR i IN 1 .. aa_source_data.COUNT
 LOOP
 PIPE ROW (aa_source_data (i));
 END LOOP;
 END LOOP;
 CLOSE p_source_data;
 RETURN;
 END processor;
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT /*+ PARALLEL(t, 5) */ colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM TABLE (processor (base_query (argA, argB),100)) t
 GROUP BY colC
 ORDER BY colC
 END with_pipeline;
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM (SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB)
 GROUP BY colC
 ORDER BY colC;
 END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PM

Earthlink wrote:
Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701

Performance issues with version enable partitioned tables?

Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
 Object Name Rows Bytes Cost Object Node In/Out PStart PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE 1 249
UPDATE SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI 1 266 249
PARTITION RANGE ALL 1 9
TABLE ACCESS FULL SIG.SIG_QUA_IMG_LT 1 259 2 1 9
VIEW SYS.VW_NSO_1 1 7 247
NESTED LOOPS 1 739 247
NESTED LOOPS 1 677 247
NESTED LOOPS 1 412 246
NESTED LOOPS 1 114 244
INDEX RANGE SCAN WMSYS.MODIFIED_TABLES_PK 1 62 2
INDEX RANGE SCAN SIG.QIM_PK 1 52 243
TABLE ACCESS BY GLOBAL INDEX ROWID SIG.SIG_QUA_IMG_LT 1 298 2 ROWID ROW L
INDEX RANGE SCAN SIG.SIG_QUA_IMG_PKI$ 1 1
INDEX RANGE SCAN WMSYS.WM$NEXTVER_TABLE_NV_INDX 1 265 1
INDEX UNIQUE SCAN WMSYS.MODIFIED_TABLES_PK 1 62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))

Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben

Performance issues

Hi,
The program(developed by someother person) which was given to me is having performance issue. Its giving RUNTIME ERROR 'TIME LIMIT EXCEEDED'. Can u please suggest me in what way i can improve the performance of the program.
please help me in resolving this.
Helpful answers will be rewarded.
TABLES : MARA, "General Material Data
MARC, "Plant Data for Material
VBAP, "Sales Document: Item Data
MARD, "Storage Location Data for Material
MAST, "Material to BOM Link
MKPF, "Header: Material Document
MSEG, "Document Segment: Material
PKHD, "Control Cycle
PKPS, "Control Cycle Item / Kanban
PVBE, "Supply area
ZTGRP, "Wabco Technology Group table
ZZC10. "Kanban status table
I N T E R N A L T A B L E D E C L A R A T I O N *
INTERNAL TABLE FOR TECH.GROUP AND PLANT
DATA: BEGIN OF IT_MARC_ZTGRP OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
ZZPTG LIKE ZTGRP-ZZPTG,
ZZPTD LIKE ZTGRP-ZZPTD,
END OF IT_MARC_ZTGRP.
INTERNAL TABLE FOR RETURN VALUES
DATA IT_RETURN LIKE TABLE OF BAPIRET2 WITH HEADER LINE.
INTERNAL TABLE FOR SUBASSEMBLY AND FINISHED GOOD
DATA: BEGIN OF IT_MATERIAL OCCURS 0,
IDNRK LIKE STPO-IDNRK,
MATNR LIKE MAST-MATNR,
END OF IT_MATERIAL.
INTERNAL TABLE FOR OUTPUT YESTERDAY
DATA: BEGIN OF IT_KBED_KAKO OCCURS 0,
KBEAREST LIKE KBED-KBEAREST,
KRUEREST LIKE KBED-KRUEREST,
KEINH LIKE KBED-KEINH,
END OF IT_KBED_KAKO.
INTERNAL TABLE FOR MATERIAL AND PLANT
DATA: BEGIN OF IT_PLANT OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
END OF IT_PLANT.
DATA: BEGIN OF IT_COBK OCCURS 0,
RUECK LIKE COBK-REFBN,
END OF IT_COBK.
DATA: BEGIN OF IT_COEPL OCCURS 0,
KOKRS LIKE COEPL-KOKRS,
BELNR LIKE COEPL-BELNR,
END OF IT_COEPL.
DATA: BEGIN OF IT_CAPACITIES OCCURS 0,
LSBBTR LIKE COEPL-LSBBTR,
MEINB LIKE COEPL-MEINB,
END OF IT_CAPACITIES.
DATA: BEGIN OF IT_MKPF_MSEG OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
DMBTR LIKE MSEG-DMBTR,
WERKS LIKE MSEG-WERKS,
END OF IT_MKPF_MSEG.
INTERNAL TABLE FOR MATERIAL-TO-BOM LINK
DATA: IT_MAST LIKE MAST OCCURS 0 WITH HEADER LINE.
INTERNAL TABLE FOR MATERIAL
DATA: BEGIN OF IT_MAT OCCURS 0,
MATNR LIKE MARA-MATNR,
END OF IT_MAT.
INTERNAL TABLE FOR STORAGE LOCATION DATA FOR SUBASSEMBLY
DATA: BEGIN OF IT_MARD OCCURS 0,
LABST LIKE MARD-LABST,
END OF IT_MARD.
INTERNAL TABLE FOR PLANT FOR MATERIALS
DATA IT_MARC LIKE MARC OCCURS 0 WITH HEADER LINE.
INTERNAL TABLE FOR BOM ITEM DATA
DATA: IT_STPO LIKE STPO OCCURS 0 WITH HEADER LINE.
INTERNAL TABLE FOR KANBAN STATUS DATA
DATA IT_ZZC10 LIKE ZZC10 OCCURS 0 WITH HEADER LINE.
TEMPORARY INTERNAL TABLE FOR KANBAN STATUS DATA
DATA IT_ZZC10_TEMP LIKE ZZC10 OCCURS 0 WITH HEADER LINE.
INTERNAL TABLE FOR CONTROL CYCLE
DATA IT_PKHD LIKE PKHD OCCURS 0 WITH HEADER LINE.
INTERNAL TABLE FOR CONTROL CYCLE ITEM
DATA IT_PKPS LIKE PKPS OCCURS 0 WITH HEADER LINE.
INTERNAL TABLE FOR MATERIAL DOCUMENT HEADER
DATA IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE.
INTERNAL TABLE FOR MATERIAL DOCUMENT ITEM
DATA IT_MSEG LIKE MSEG OCCURS 0 WITH HEADER LINE.
TEMPORARY INTERNAL TABLE FOR ACTUAL QUANTITY
DATA : BEGIN OF IT_TEMP OCCURS 0,
TECH LIKE ZTGRP-ZZPTD,
MATNR LIKE ZZC10-MATNR,
FINISHED LIKE MAST-MATNR,
PKNUM LIKE PKHD-PKNUM,
WERKS LIKE ZZC10-WERKS,
GSMNG LIKE PLAF-GSMNG,
MEINS LIKE PLAF-MEINS,
BEHAZ LIKE PKHD-BEHAZ,
BEHMG LIKE PKHD-BEHMG,
PKBMG LIKE ZZC10-PKBMG,
LATEHOURS LIKE PKHD-KWBZM,
FILLRATE TYPE P DECIMALS 2,
REPL_LEAD_TIME TYPE P DECIMALS 3,
QTY_1 LIKE PLAF-GSMNG,
QTY_2 LIKE PLAF-GSMNG,
QTY_3 LIKE PLAF-GSMNG,
QTY_4 LIKE PLAF-GSMNG,
QTY_5 LIKE PLAF-GSMNG,
QTY_6 LIKE PLAF-GSMNG,
GSMNG_OUTY LIKE PLAF-GSMNG,
MEINS_OUTY LIKE PLAF-MEINS,
KAPBD_OUTY LIKE COEPL-LSTBTR,
KEINH_OUTY LIKE COEPL-MEINH,
GSMNG_OUTM LIKE MSEG-MENGE,
MEINS_OUTM LIKE MSEG-MEINS,
KAPBD_OUTM LIKE COEPL-LSTBTR,
KEINH_OUTM LIKE COEPL-MEINH,
GSMNG_BORD LIKE PLAF-GSMNG,
MEINS_BORD LIKE MSEG-MEINS,
KAPBD_BORD LIKE KBED-KBEAREST,
KEINH_BORD LIKE COEPL-MEINH,
GSMNG_TDAY LIKE PLAF-GSMNG,
KAPBD_TDAY LIKE KBED-KBEAREST,
GSMNG_DAY1 LIKE PLAF-GSMNG,
KAPBD_DAY1 LIKE KBED-KBEAREST,
GSMNG_DAY2 LIKE PLAF-GSMNG,
KAPBD_DAY2 LIKE KBED-KBEAREST,
GSMNG_DAY3 LIKE PLAF-GSMNG,
KAPBD_DAY3 LIKE KBED-KBEAREST,
GSMNG_DAY4 LIKE PLAF-GSMNG,
KAPBD_DAY4 LIKE KBED-KBEAREST,
GSMNG_DAY5 LIKE PLAF-GSMNG,
KAPBD_DAY5 LIKE KBED-KBEAREST,
STOCK_PO01 LIKE MARD-LABST,
F_GSMNG_BORD LIKE PLAF-GSMNG,
F_MEINS_BORD LIKE MSEG-MEINS,
F_KAPBD_BORD LIKE KBED-KBEAREST,
F_KEINH_BORD LIKE COEPL-MEINH,
F_GSMNG_TDAY LIKE PLAF-GSMNG,
F_MEINS_TDAY LIKE MSEG-MEINS,
F_KAPBD_TDAY LIKE KBED-KBEAREST,
F_KEINH_TDAY LIKE COEPL-MEINH,
F_GSMNG_DAY1 LIKE PLAF-GSMNG,
F_MEINS_DAY1 LIKE MSEG-MEINS,
F_KAPBD_DAY1 LIKE KBED-KBEAREST,
F_KEINH_DAY1 LIKE COEPL-MEINH,
F_GSMNG_DAY2 LIKE PLAF-GSMNG,
F_MEINS_DAY2 LIKE MSEG-MEINS,
F_KAPBD_DAY2 LIKE KBED-KBEAREST,
F_KEINH_DAY2 LIKE COEPL-MEINH,
F_GSMNG_DAY3 LIKE PLAF-GSMNG,
F_MEINS_DAY3 LIKE MSEG-MEINS,
F_KAPBD_DAY3 LIKE KBED-KBEAREST,
F_KEINH_DAY3 LIKE COEPL-MEINH,
F_GSMNG_DAY4 LIKE PLAF-GSMNG,
F_MEINS_DAY4 LIKE MSEG-MEINS,
F_KAPBD_DAY4 LIKE KBED-KBEAREST,
F_KEINH_DAY4 LIKE COEPL-MEINH,
F_GSMNG_DAY5 LIKE PLAF-GSMNG,
F_MEINS_DAY5 LIKE MSEG-MEINS,
F_KAPBD_DAY5 LIKE KBED-KBEAREST,
F_KEINH_DAY5 LIKE COEPL-MEINH,
F_GSMNG_OUTM LIKE MSEG-MENGE,
F_MEINS_OUTM LIKE MSEG-MEINS,
F_KAPBD_OUTM LIKE COEPL-LSTBTR,
F_KEINH_OUTM LIKE COEPL-MEINH,
F_GSMNG_OUTN LIKE MSEG-MENGE,
F_MEINS_OUTN LIKE MSEG-MEINS,
F_KAPBD_OUTN LIKE KBED-KBEAREST,
F_KEINH_OUTN LIKE COEPL-MEINH,
END OF IT_TEMP.
INTERNAL TABLE FOR PLANNED DATA
DATA IT_PLAF LIKE PLAF OCCURS 0 WITH HEADER LINE.
INTERNAL TABLE FOR FACTORY CALENDER AND CURRENCY
DATA: BEGIN OF IT_T001W OCCURS 0,
WERKS LIKE T001W-WERKS,
BWKEY LIKE T001W-BWKEY,
FABKL LIKE T001W-FABKL,
END OF IT_T001W.
V A R I A B L E S *
DATA: AUX_BORD LIKE SY-DATUM,
AUX_YDAY LIKE SY-DATUM,
AUX_TDAY LIKE SY-DATUM,
AUX_DAY1 LIKE SY-DATUM,
AUX_DAY2 LIKE SY-DATUM,
AUX_DAY3 LIKE SY-DATUM,
AUX_DAY4 LIKE SY-DATUM,
AUX_DAY5 LIKE SY-DATUM,
AUX_CURRENT LIKE SY-DATUM,
AUX_PREVIOUS LIKE SY-DATUM,
AUX_TECH LIKE ZTGRP-ZZPTD,
AUX_BUDAT LIKE MKPF-BUDAT,
AUX_LOW LIKE MKPF-BUDAT,
AUX_HIGH LIKE MKPF-BUDAT,
AUX_MNG LIKE MSEG-MENGE,
AUX_MENGE LIKE MSEG-MENGE,
AUX_QUANT LIKE PLAF-GSMNG,
AUX_SUM_UNIT LIKE UMADD-MSEHI,
AUX_TIMESTAMP1 LIKE CCUPEAKA-TIMESTAMP,
AUX_TIMESTAMP2 LIKE CCUPEAKA-TIMESTAMP,
AUX_BUKRS LIKE T001K-BUKRS,
AUX_BWKEY LIKE T001W-BWKEY,
AUX_GSMNG LIKE PLAF-GSMNG,
AUX_PKBMG LIKE ZZC10-PKBMG,
AUX_FILL LIKE ZZC10-PKBMG,
AUX_TOTAL LIKE ZZC10-PKBMG,
AUX_FABKL LIKE SCAL-FCALID,
AUX_WAERS LIKE MSEG-WAERS,
AUX_ZZC10_HR TYPE P DECIMALS 3,
AUX_PLAF_HR TYPE P DECIMALS 3,
AUX_KAPBD_OUTY TYPE P DECIMALS 3,
AUX_KAPBD_OUTM TYPE P DECIMALS 3,
AUX_KAPBD_BORD TYPE P DECIMALS 3,
AUX_F_KAPBD_BORD TYPE P DECIMALS 3,
AUX_F_KAPBD_TDAY TYPE P DECIMALS 3,
AUX_F_KAPBD_DAY1 TYPE P DECIMALS 3,
AUX_F_KAPBD_DAY2 TYPE P DECIMALS 3,
AUX_F_KAPBD_DAY3 TYPE P DECIMALS 3,
AUX_F_KAPBD_DAY4 TYPE P DECIMALS 3,
AUX_F_KAPBD_DAY5 TYPE P DECIMALS 3,
AUX_F_KAPBD_OUTM TYPE P DECIMALS 3,
AUX_F_KAPBD_OUTN TYPE P DECIMALS 3,
AUX_PKHD_TIME TYPE P DECIMALS 3,
AUX_LATEHOURS TYPE P DECIMALS 3,
AUX_DIFF TYPE I,
AUX_FLAG TYPE C,
AUX_SET TYPE C,
AUX_DATUMABSOLUT(5) TYPE P,
AUX_FDAY LIKE SY-DATUM,
AUX_DAYS LIKE PKHD-KWBZD,
AUX_HOURS LIKE IT_ZZC10-TIME_EMPTY,
AUX_TIME LIKE PKHD-KWBZM,
AUX_PKHD_DAYS LIKE PKHD-KWBZD,
AUX_PKHD_HOURS LIKE PKHD-KWBZM,
AUX_TMP_DAYS LIKE PKHD-KWBZM VALUE 24,
AUX_TMP_HRS LIKE PKHD-KWBZM,
AUX_FILL_DAYS LIKE PKHD-KWBZD,
AUX_FILL_HOURS LIKE AUX_HOURS,
AUX_FILL_TIME LIKE PKHD-KWBZM,
AUX_TOTAL_QTY LIKE PKHD-BEHMG,
AUX_RATID LIKE PLAF-RATID,
AUX_MATNR LIKE PLAF-MATNR,
AUX_HEADER LIKE MARA-MATNR,
AUX_ZZPTG LIKE MARC-ZZPTG,
AUX_PEDTR LIKE PLAF-PEDTR,
AUX_KRUEREST LIKE KBED-KRUEREST,
AUX_KBEAREST LIKE KBED-KBEAREST,
AUX_KRUEREST_T LIKE KBED-KRUEREST,
AUX_KBEAREST_T LIKE KBED-KBEAREST,
AUX_KEINH LIKE KBED-KEINH,
AUX_KAPBD LIKE KBED-KBEAREST,
AUX_ARBPL LIKE MKAL-MDV01,
AUX_ARBID LIKE CRHD-OBJID,
AUX_QUALF LIKE CRHD-QUALF,
AUX_SAT1800 LIKE SY-UZEIT VALUE '180000'.
S E L E C T I O N S C R E E N *
INPUT SELECTION
SELECTION-SCREEN : BEGIN OF BLOCK BL0 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS : SO_PRVBE FOR PVBE-PRVBE,
SO_MATNR FOR MARA-MATNR,
SO_ZZPTG FOR MARC-ZZPTG OBLIGATORY,
SO_WERKS FOR MARC-WERKS OBLIGATORY,
SO_BUDAT FOR MKPF-BUDAT OBLIGATORY.
SELECTION-SCREEN : END OF BLOCK BL0.
I N I T I A L I Z A T I O N *
INITIALIZATION.
MOVE SY-DATUM TO AUX_CURRENT.
AUX_PREVIOUS = AUX_CURRENT - 1.
MOVE SY-DATUM TO SO_BUDAT-LOW.
MOVE '01' TO SO_BUDAT-LOW+6(2).
APPEND SO_BUDAT.
AUX_PREVIOUS = AUX_CURRENT - 1.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN.
CHECK ON SELECTION SCREEN
PERFORM CHECK_ON_SELECTION.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
CHECK IF BOM EXISTS FOR THE COMPONENTS
PERFORM CHECK_BOM_EXISTENCE.
GET FINISHED PRODUCT NUMBER FOR THE SUBASSEMBLIES
IF NOT IT_MARC_ZTGRP[] IS INITIAL.
LOOP AT IT_MARC_ZTGRP.
PERFORM GET_HEADER_MATERIAL USING IT_MARC_ZTGRP-MATNR.
IF NOT IT_MAT[] IS INITIAL.
PERFORM GET_FINISHED_GOOD TABLES IT_MAT.
ENDIF.
CLEAR IT_MARC_ZTGRP.
ENDLOOP.
ELSE.
MESSAGE S010 WITH 'No data present for given selection'.
ENDIF.
CHECK IF SALES DATA EXIST FOR THE FINISHED GOOD
PERFORM CHECK_SALESDATA_EXISTENCE.
GET CONTROL CYCLE AND KANBAN DATA
PERFORM GET_KANBAN_DATA.
GET VALUATION AREA DATA
PERFORM GET_VALUATION_AREA.
GET MATERIAL DOCUMENT DATA
PERFORM GET_MATERIAL_DOC_DATA.
GET KANBAN DETAILS
PERFORM GET_KANBAN_DETAILS.
E N D O F S E L E C T I O N *
END-OF-SELECTION.
IF NOT IT_TEMP[] IS INITIAL.
DISPLAY OUTPUT
PERFORM DISPLAY_OUTPUT.
ENDIF.
*& Form CHECK_ON_SELECTION
text
--> p1 text
<-- p2 text
FORM CHECK_ON_SELECTION .
CHECK IF ENTERED PLANT IS VALID
IF NOT SO_WERKS-LOW IS INITIAL AND SO_WERKS-HIGH IS INITIAL.
SELECT SINGLE * FROM MARC WHERE WERKS EQ SO_WERKS-LOW.
IF SY-SUBRC NE 0.
SET CURSOR FIELD 'SO_WERKS-LOW'.
MESSAGE E010 WITH 'Please enter a valid Plant'.
ENDIF.
ENDIF.
CHECK IF SUPPLY AREA AND PLANT IS VALID
IF NOT SO_PRVBE-LOW IS INITIAL AND SO_PRVBE-HIGH IS INITIAL.
IF NOT SO_WERKS IS INITIAL AND SO_WERKS-HIGH IS INITIAL.
SELECT SINGLE * FROM PVBE WHERE WERKS EQ SO_WERKS-LOW
AND PRVBE EQ SO_PRVBE-LOW.
IF SY-SUBRC NE 0.
SET CURSOR FIELD 'SO_PRVBE-LOW'.
MESSAGE E010 WITH 'Supply Area' SO_PRVBE-LOW 'donot belong to'
SO_WERKS-LOW.
ENDIF.
ENDIF.
ENDIF.
CHECK IF ENTERED MATERIAL NUMBER IS VALID
IF NOT SO_MATNR-LOW IS INITIAL AND SO_MATNR-HIGH IS INITIAL.
SELECT SINGLE * FROM MARA WHERE MATNR EQ SO_MATNR-LOW.
IF SY-SUBRC NE 0.
SET CURSOR FIELD 'SO_MATNR-LOW'.
MESSAGE E010 WITH 'Please enter a valid Material Number'.
ELSE.
IF NOT SO_WERKS-LOW IS INITIAL AND SO_WERKS-HIGH IS INITIAL.
SELECT SINGLE * FROM MARC WHERE MATNR EQ SO_MATNR-LOW
AND WERKS EQ SO_WERKS-LOW.
IF SY-SUBRC NE 0.
SET CURSOR FIELD 'SO_MATNR-LOW'.
MESSAGE E010 WITH 'Material' SO_MATNR-LOW
'doesnot belong to plant' SO_WERKS-LOW.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
CHECK IF TECHNOLOGY GROUP AND PLANT IS VALID
IF NOT SO_ZZPTG-LOW IS INITIAL AND SO_ZZPTG-HIGH IS INITIAL.
IF NOT SO_WERKS-LOW IS INITIAL AND SO_WERKS-HIGH IS INITIAL.
SELECT SINGLE * FROM MARC WHERE WERKS EQ SO_WERKS-LOW
AND ZZPTG EQ SO_ZZPTG-LOW.
IF SY-SUBRC NE 0.
SET CURSOR FIELD 'SO_ZZPTG-LOW'.
MESSAGE E010 WITH 'Tech.Group' SO_ZZPTG-LOW 'doesnot belong to plant'
SO_WERKS-LOW.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " CHECK_ON_SELECTION
*& Form CHECK_BOM_EXISTENCE
text
--> p1 text
<-- p2 text
FORM CHECK_BOM_EXISTENCE .
JOIN MARC AND ZTGRP TABLES TO GET THE COMPONENTS BASED ON THE INPUT
CRITERIA
REFRESH IT_MARC_ZTGRP.
SELECT MARCMATNR MARCWERKS ZTGRPZZPTG ZTGRPZZPTD
INTO TABLE IT_MARC_ZTGRP
FROM MARC INNER JOIN ZTGRP
ON MARCWERKS EQ ZTGRPWERKS AND
MARCZZPTG EQ ZTGRPZZPTG
WHERE MARC~WERKS IN SO_WERKS
AND MARC~ZZPTG IN SO_ZZPTG
AND MARC~MATNR IN SO_MATNR
AND MARC~LVORM NE 'X'
AND ( MARC~BESKZ EQ 'E' OR
MARC~BESKZ EQ 'X' ).
IF NOT IT_MARC_ZTGRP[] IS INITIAL.
CHECK THE EXISTENCE OF BOM FOR THE SELECTED COMPONENTS.
IF NOT PRESENT, DELETE THE ENTRY FROM INTERNAL TABLE
LOOP AT IT_MARC_ZTGRP.
REFRESH IT_RETURN.
CALL FUNCTION 'BAPI_MAT_BOM_EXISTENCE_CHECK'
EXPORTING
MATERIAL = IT_MARC_ZTGRP-MATNR
PLANT = IT_MARC_ZTGRP-WERKS
BOMUSAGE = '1'
TABLES
RETURN = IT_RETURN.
IF NOT IT_RETURN[] IS INITIAL.
DELETE IT_MARC_ZTGRP WHERE MATNR EQ IT_MARC_ZTGRP-MATNR
AND WERKS EQ IT_MARC_ZTGRP-WERKS
AND ZZPTG EQ IT_MARC_ZTGRP-ZZPTG.
ENDIF.
CLEAR IT_MARC_ZTGRP.
ENDLOOP.
ELSE.
MESSAGE S010 WITH 'No data present for given selection'.
ENDIF.
ENDFORM. " CHECK_BOM_EXISTENCE
*& Form GET_HEADER_MATERIAL
text
-->P_IT_MARC_ZTGRP_MATNR text
FORM GET_HEADER_MATERIAL USING P_MATNR.
REFRESH IT_STPO.
GET BOM ITEM DATA FOR THE COMPONENT
SELECT * FROM STPO INTO TABLE IT_STPO WHERE IDNRK EQ P_MATNR
AND DATUV LE SO_BUDAT-LOW
AND LKENZ NE 'X'.
IF NOT IT_STPO[] IS INITIAL.
IF BOM ITEM DATA IS PRESENT FOR THE COMPONENT
REFRESH IT_MAST.
GET MATERIAL TO BOM LINK
SELECT * FROM MAST INTO TABLE IT_MAST FOR ALL ENTRIES IN IT_STPO
WHERE STLNR EQ IT_STPO-STLNR.
IF NOT IT_MAST[] IS INITIAL.
SORT IT_MAST BY MATNR.
DELETE ADJACENT DUPLICATES FROM IT_MAST COMPARING MATNR.
LOOP AT IT_MAST.
CLEAR AUX_SET.
REFRESH IT_PLANT.
GET ALL THE PLANTS FOR THE COMPONENT
SELECT MATNR WERKS FROM MARC INTO TABLE IT_PLANT
WHERE MATNR EQ IT_MAST-MATNR.
LOOP AT IT_PLANT.
REFRESH IT_RETURN.
CHECK FOR BOM EXISTENCE FOR MATERIAL IN ALL PLANTS
CALL FUNCTION 'BAPI_MAT_BOM_EXISTENCE_CHECK'
EXPORTING
MATERIAL = IT_MAST-MATNR
PLANT = IT_PLANT-WERKS
BOMUSAGE = '1'
TABLES
RETURN = IT_RETURN.
IF IT_RETURN[] IS INITIAL.
MOVE 'X' TO AUX_SET.
ENDIF.
CLEAR IT_PLANT.
ENDLOOP.
IF BOM EXISTS FOR THE COMPONENT IN ANY PLANT, MOVE THE COMPONENT
TO INTERNAL TABLE IT_MAT
IF AUX_SET EQ 'X'.
MOVE IT_MAST-MATNR TO IT_MAT-MATNR.
APPEND IT_MAT.
CLEAR IT_MAT.
ELSE.
IF BOM DOESNOT EXISTS FOR THE COMPONENT IN ALL PLANTS,
SELECT THE COMPONENT AS THE FINISHED PRODUCT
CLEAR MARA.
SELECT SINGLE * FROM MARA WHERE MATNR EQ IT_MAST-MATNR.
IF SY-SUBRC EQ 0 AND MARA-LVORM NE 'X'.
MOVE: IT_MARC_ZTGRP-MATNR TO IT_MATERIAL-IDNRK,
IT_MAST-MATNR TO IT_MATERIAL-MATNR.
APPEND IT_MATERIAL.
CLEAR IT_MATERIAL.
ENDIF.
ENDIF.
CLEAR IT_MAST.
ENDLOOP.
ENDIF.
ELSE.
IF BOM ITEM DATA DOESNOT PRESENT FOR THE COMPONENT,
CONSIDER THE COMPONENT AS FINISHED PRODUCT
CLEAR MARA.
SELECT SINGLE * FROM MARA WHERE MATNR EQ P_MATNR.
IF SY-SUBRC EQ 0 AND MARA-LVORM NE 'X'.
MOVE: IT_MARC_ZTGRP-MATNR TO IT_MATERIAL-IDNRK,
P_MATNR TO IT_MATERIAL-MATNR.
APPEND IT_MATERIAL.
CLEAR IT_MATERIAL.
ENDIF.
ENDIF.
ENDFORM. " GET_HEADER_MATERIAL
*& Form GET_FINISHED_GOOD
text
-->P_IT_MAT text
FORM GET_FINISHED_GOOD TABLES P_IT_MAT LIKE IT_MAT[].
LOOP AT P_IT_MAT.
PERFORM GET_HEADER_MATERIAL USING P_IT_MAT-MATNR.
DELETE P_IT_MAT INDEX 1.
CLEAR P_IT_MAT.
ENDLOOP.
ENDFORM. " GET_FINISHED_GOOD
*& Form CHECK_SALESDATA_EXISTENCE
text
--> p1 text
<-- p2 text
FORM CHECK_SALESDATA_EXISTENCE .
IF NOT IT_MATERIAL[] IS INITIAL.
LOOP AT IT_MATERIAL.
CLEAR VBAP.
SELECT SINGLE * FROM VBAP WHERE MATNR EQ IT_MATERIAL-MATNR.
IF SY-SUBRC NE 0.
DELETE IT_MATERIAL WHERE IDNRK EQ IT_MATERIAL-IDNRK
AND MATNR EQ IT_MATERIAL-MATNR.
ENDIF.
CLEAR IT_MATERIAL.
ENDLOOP.
ENDIF.
ENDFORM. " CHECK_SALESDATA_EXISTENCE
*& Form GET_KANBAN_DATA
text
--> p1 text
<-- p2 text
FORM GET_KANBAN_DATA.
SORT IT_MATERIAL BY IDNRK MATNR.
DELETE ADJACENT DUPLICATES FROM IT_MATERIAL COMPARING ALL FIELDS.
IF NOT IT_MATERIAL[] IS INITIAL.
GET CONTROL CYCLE HEADER DATA
SELECT * FROM PKHD INTO TABLE IT_PKHD
FOR ALL ENTRIES IN IT_MATERIAL
WHERE WERKS IN SO_WERKS
AND MATNR EQ IT_MATERIAL-IDNRK
AND PRVBE IN SO_PRVBE.
IF NOT IT_PKHD[] IS INITIAL.
GET CONTROL CYCLE ITEM DATA
SELECT * FROM PKPS INTO TABLE IT_PKPS
FOR ALL ENTRIES IN IT_PKHD
WHERE PKNUM EQ IT_PKHD-PKNUM.
IF NOT IT_PKPS[] IS INITIAL.
GET KANBAN STATUS DATA
SELECT * FROM ZZC10 INTO TABLE IT_ZZC10_TEMP
FOR ALL ENTRIES IN IT_PKPS
WHERE PKKEY EQ IT_PKPS-PKKEY
AND PKNUM EQ IT_PKPS-PKNUM
AND ZDATE BETWEEN SO_BUDAT-LOW AND SY-DATUM
AND STATUS EQ '5'.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " GET_KANBAN_DATA
*& Form GET_VALUATION_AREA
text
--> p1 text
<-- p2 text
FORM GET_VALUATION_AREA.
IF NOT IT_MARC_ZTGRP[] IS INITIAL.
SELECT WERKS BWKEY FABKL FROM T001W INTO TABLE IT_T001W
FOR ALL ENTRIES IN IT_MARC_ZTGRP
WHERE WERKS EQ IT_MARC_ZTGRP-WERKS.
ENDIF.
ENDFORM. " GET_VALUATION_AREA
*& Form GET_MATERIAL_DOC_DATA
text
--> p1 text
<-- p2 text
FORM GET_MATERIAL_DOC_DATA.
GET MATERIAL DOCUMENT HEADER DATA
SELECT * FROM MKPF INTO TABLE IT_MKPF
WHERE BUDAT IN SO_BUDAT.
IF NOT IT_MKPF[] IS INITIAL.
GET MATERIAL DOCUMENT ITEM DATA
SELECT * FROM MSEG INTO TABLE IT_MSEG
FOR ALL ENTRIES IN IT_MKPF
WHERE MBLNR EQ IT_MKPF-MBLNR
AND WERKS IN SO_WERKS
AND MJAHR EQ SY-DATUM+0(4)
AND ( BWART EQ '131' OR BWART EQ '132' ).
IF NOT IT_MATERIAL[] IS INITIAL.
LOOP AT IT_MSEG.
READ TABLE IT_MATERIAL WITH KEY IDNRK = IT_MSEG-MATNR.
IF SY-SUBRC NE 0.
DELETE IT_MSEG WHERE MATNR EQ IT_MSEG-MATNR.
ENDIF.
CLEAR: IT_MATERIAL, IT_MSEG.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM. " GET_MATERIAL_DOC_DATA
*& Form GET_KANBAN_DETAILS
text
--> p1 text
<-- p2 text
FORM GET_KANBAN_DETAILS .
SORT IT_PKHD BY PKNUM.
IF NOT IT_ZZC10_TEMP[] IS INITIAL.
LOOP AT IT_ZZC10_TEMP.
CLEAR: AUX_FILL, AUX_PKBMG.
MOVE IT_ZZC10_TEMP] TO IT_ZZC10[.
DELETE IT_ZZC10 WHERE MATNR NE IT_ZZC10_TEMP-MATNR
AND WERKS NE IT_ZZC10_TEMP-WERKS.
LOOP AT IT_ZZC10.
CLEAR: AUX_TIMESTAMP1, AUX_TIMESTAMP2, AUX_ZZC10_HR, AUX_DIFF.
EMPTY DATE GREATER THAN FULL DATE
IF IT_ZZC10-DATE_EMPTY GT IT_ZZC10-DATE_FULL.
CONCATENATE IT_ZZC10-DATE_EMPTY IT_ZZC10-TIME_EMPTY
INTO AUX_TIMESTAMP1.
CONCATENATE IT_ZZC10-DATE_FULL IT_ZZC10-TIME_FULL
INTO AUX_TIMESTAMP2.
CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
EXPORTING
TIMESTAMP1 = AUX_TIMESTAMP1
TIMESTAMP2 = AUX_TIMESTAMP2
IMPORTING
DIFFERENCE = AUX_DIFF.
AUX_ZZC10_HR = AUX_DIFF / 3600.
FULL DATE GREATER THAN EMPTY DATE
ELSEIF IT_ZZC10-DATE_FULL GT IT_ZZC10-DATE_EMPTY.
CONCATENATE IT_ZZC10-DATE_EMPTY IT_ZZC10-TIME_EMPTY
INTO AUX_TIMESTAMP2.
CONCATENATE IT_ZZC10-DATE_FULL IT_ZZC10-TIME_FULL
INTO AUX_TIMESTAMP1.
CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
EXPORTING
TIMESTAMP1 = AUX_TIMESTAMP1
TIMESTAMP2 = AUX_TIMESTAMP2
IMPORTING
DIFFERENCE = AUX_DIFF.
AUX_ZZC10_HR = AUX_DIFF / 3600.
FULL DATE EQUAL TO EMPTY DATE
ELSEIF IT_ZZC10-DATE_FULL EQ IT_ZZC10-DATE_EMPTY.
EMPTY TIME GREATER THAN FULL TIME
IF IT_ZZC10-TIME_EMPTY GT IT_ZZC10-TIME_FULL.
CONCATENATE IT_ZZC10-DATE_EMPTY IT_ZZC10-TIME_EMPTY
INTO AUX_TIMESTAMP1.
CONCATENATE IT_ZZC10-DATE_FULL IT_ZZC10-TIME_FULL
INTO AUX_TIMESTAMP2.
CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
EXPORTING
TIMESTAMP1 = AUX_TIMESTAMP1
TIMESTAMP2 = AUX_TIMESTAMP2
IMPORTING
DIFFERENCE = AUX_DIFF.
AUX_ZZC10_HR = AUX_DIFF / 3600.
FULL TIME GREATER THAN EMPTY TIME
ELSEIF IT_ZZC10-TIME_FULL GT IT_ZZC10-TIME_EMPTY.
CONCATENATE IT_ZZC10-DATE_EMPTY IT_ZZC10-TIME_EMPTY
INTO AUX_TIMESTAMP2.
CONCATENATE IT_ZZC10-DATE_FULL IT_ZZC10-TIME_FULL
INTO AUX_TIMESTAMP1.
CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
EXPORTING
TIMESTAMP1 = AUX_TIMESTAMP1
TIMESTAMP2 = AUX_TIMESTAMP2
IMPORTING
DIFFERENCE = AUX_DIFF.
AUX_ZZC10_HR = AUX_DIFF / 3600.
FULL TIME EQUAL TO EMPTY TIME
ELSEIF IT_ZZC10-TIME_FULL EQ IT_ZZC10-TIME_EMPTY.
AUX_ZZC10_HR = 0.
ENDIF.
ENDIF.
READ TABLE IT_PKHD WITH KEY PKNUM = IT_ZZC10-PKNUM
BINARY SEARCH.
IF SY-SUBRC EQ 0.
CLEAR: AUX_TIMESTAMP1, AUX_TIMESTAMP2,
AUX_PKHD_DAYS, AUX_PKHD_HOURS, AUX_TMP_DAYS,
AUX_PKHD_TIME.
AUX_PKHD_DAYS = IT_PKHD-KWBZD.
AUX_PKHD_HOURS = IT_PKHD-KWBZM.
IF AUX_PKHD_DAYS NE 0.
AUX_TMP_DAYS = AUX_PKHD_DAYS * 24.
AUX_PKHD_TIME = AUX_TMP_DAYS + AUX_PKHD_HOURS.
ELSE.
AUX_PKHD_TIME = AUX_PKHD_HOURS.
ENDIF.
COMPARE STATUS CHANGE TIME WITH REPLENISHMENT LEAD TIME
IF AUX_ZZC10_HR GT AUX_PKHD_TIME.
CLEAR: AUX_LATEHOURS.
LATE HOURS
AUX_LATEHOURS = AUX_ZZC10_HR - AUX_PKHD_TIME.
LATE QUANTITY FOR +1 DAY
IF AUX_LATEHOURS LE 24.
IT_TEMP-QTY_1 = IT_TEMP-QTY_1 + IT_ZZC10-PKBMG.
LATE QUANTITY FOR +2 DAYS
ELSEIF AUX_LATEHOURS GT 24
AND AUX_LATEHOURS LE 48.
IT_TEMP-QTY_2 = IT_TEMP-QTY_2 + IT_ZZC10-PKBMG.
LATE QUANTITY FOR +3 DAYS
ELSEIF AUX_LATEHOURS GT 48
AND AUX_LATEHOURS LE 72.
IT_TEMP-QTY_3 = IT_TEMP-QTY_3 + IT_ZZC10-PKBMG.
LATE QUANTITY FOR +4 DAYS
ELSEIF AUX_LATEHOURS GT 72
AND AUX_LATEHOURS LE 96.
IT_TEMP-QTY_4 = IT_TEMP-QTY_4 + IT_ZZC10-PKBMG.
LATE QUANTITY FOR +5 DAYS
ELSEIF AUX_LATEHOURS GT 96
AND AUX_LATEHOURS LE 120.
IT_TEMP-QTY_5 = IT_TEMP-QTY_5 + IT_ZZC10-PKBMG.
LATE QUANTITY FOR MORE THAN 5 DAYS
ELSEIF AUX_LATEHOURS GT 120.
IT_TEMP-QTY_6 = IT_TEMP-QTY_6 + IT_ZZC10-PKBMG.
ENDIF.
TOTAL KANBAN LATE QUANTITIES
AUX_PKBMG = AUX_PKBMG + IT_ZZC10-PKBMG.
ELSE.
AUX_FILL = AUX_FILL + IT_ZZC10-PKBMG.
CONTINUE.
ENDIF.
ENDIF.
ENDLOOP.
SUBASSEMBLY PART NUMBER
IT_TEMP-MATNR = IT_ZZC10-MATNR.
FINISHED GOOD
READ TABLE IT_MATERIAL WITH KEY IDNRK = IT_ZZC10-MATNR.
IT_TEMP-FINISHED = IT_MATERIAL-MATNR.
TECHNOLOGY GROUP
READ TABLE IT_MARC_ZTGRP WITH KEY WERKS = IT_ZZC10-WERKS
MATNR = IT_ZZC10-MATNR.
IF SY-SUBRC EQ 0.
MOVE IT_MARC_ZTGRP-ZZPTD TO IT_TEMP-TECH.
ENDIF.
NUMBER OF KANBAN CONTAINERS
IT_TEMP-BEHAZ = IT_PKHD-BEHAZ.
KANBAN QUANTITY
IT_TEMP-BEHMG = IT_PKHD-BEHMG.
LATE HOURS
AUX_LATEHOURS = AUX_ZZC10_HR - AUX_PKHD_TIME.
IT_TEMP-LATEHOURS = AUX_LATEHOURS.
REPLENISHMENT LEAD TIME
IT_TEMP-REPL_LEAD_TIME = AUX_PKHD_TIME.
KANBAN LATE QUANTITIES
IT_TEMP-GSMNG = AUX_PKBMG.
FILL RATE
AUX_TOTAL = AUX_PKBMG + AUX_FILL.
IT_TEMP-FILLRATE = ( AUX_FILL / AUX_TOTAL ) * 100.
GET STOCK IN PO01
REFRESH IT_MARD.
SELECT LABST FROM MARD INTO TABLE IT_MARD
WHERE MATNR EQ IT_ZZC10-MATNR
AND WERKS EQ IT_ZZC10-WERKS.
IF SY-SUBRC EQ 0.
LOOP AT IT_MARD.
SUM.
ENDLOOP.
MOVE IT_MARD-LABST TO IT_TEMP-STOCK_PO01.
CLEAR IT_MARD.
ENDIF.
GET YESTERDAY'S OUTPUT QUANTITY
PERFORM GET_YESTERDAY_QTY.
CUMULATIVE OUTPUT FOR ACTUAL MONTH
PERFORM GET_CUMULATIVE_OUTPUT.
GET BACKORDER SUBASSEMBLY DATA
PERFORM GET_BACKORDER_QTY.
GET BACKORDER FINISHED GOODS, TODAY, +1, +2, +3, +4, +5
AND AVERAGE OUPTUT NEEDED DATA
PERFORM GET_FINISHEDGOODS_DATA.
GET DATA FOR ACTUAL MONTH DELIVERED
PERFORM GET_ACTUAL_MONTH_DATA.
APPEND IT_TEMP.
CLEAR IT_TEMP.
DELETE IT_ZZC10_TEMP WHERE MATNR EQ IT_ZZC10_TEMP-MATNR
AND WERKS EQ IT_ZZC10_TEMP-WERKS.
CLEAR: IT_ZZC10, IT_ZZC10_TEMP, IT_PKHD.
ENDLOOP.
ENDIF.
ENDFORM. " GET_KANBAN_DETAILS
*& Form GET_YESTERDAY_QTY
text
--> p1 text
<-- p2 text
FORM GET_YESTERDAY_QTY .
CLEAR: AUX_BUKRS, AUX_WAERS.
READ TABLE IT_T001W WITH KEY WERKS = IT_PKHD-WERKS.
IF SY-SUBRC EQ 0.
CLEAR AUX_FABKL.
MOVE IT_T001W-FABKL TO AUX_FABKL.
SELECT SINGLE BUKRS INTO AUX_BUKRS FROM T001K
WHERE BWKEY = IT_T001W-BWKEY.
IF SY-SUBRC EQ 0.
SELECT SINGLE WAERS INTO AUX_WAERS FROM T001
WHERE BUKRS = AUX_BUKRS.
ENDIF.
IF 'WD;WF;WN;WP;WU' CS AUX_FABKL.
AUX_FABKL(1) = 'P'.
ENDIF.
MOVE SY-DATUM TO AUX_DATUMABSOLUT.
PERFORM WEEKDAY USING AUX_DATUMABSOLUT.
MOVE 'W' TO AUX_FLAG.
PERFORM CHECK_WORKING_DAY CHANGING AUX_FLAG.
IF AUX_DATUMABSOLUT = 0.
AUX_YDAY = SY-DATUM.
ELSEIF AUX_DATUMABSOLUT = 1.
AUX_YDAY = SY-DATUM - 1.
ELSEIF AUX_FLAG = 'F'.
AUX_YDAY = SY-DATUM.
ENDIF.
IF AUX_DATUMABSOLUT = 0 OR
AUX_DATUMABSOLUT = 1 OR
AUX_FLAG = 'F'.
PERFORM DATE_WITH_OFFSET USING 0 CHANGING AUX_TDAY.
PERFORM DATE_WITH_OFFSET USING 1 CHANGING AUX_DAY1.
PERFORM DATE_WITH_OFFSET USING 2 CHANGING AUX_DAY2.
PERFORM DATE_WITH_OFFSET USING 3 CHANGING AUX_DAY3.
PERFORM DATE_WITH_OFFSET USING 4 CHANGING AUX_DAY4.
PERFORM DATE_WITH_OFFSET USING 5 CHANGING AUX_DAY5.
ELSE.
PERFORM DATE_WITH_OFFSET USING 0 CHANGING AUX_YDAY.
PERFORM DATE_WITH_OFFSET USING 1 CHANGING AUX_TDAY.
PERFORM DATE_WITH_OFFSET USING 2 CHANGING AUX_DAY1.
PERFORM DATE_WITH_OFFSET USING 3 CHANGING AUX_DAY2.
PERFORM DATE_WITH_OFFSET USING 4 CHANGING AUX_DAY3.
PERFORM DATE_WITH_OFFSET USING 5 CHANGING AUX_DAY4.
PERFORM DATE_WITH_OFFSET USING 6 CHANGING AUX_DAY5.
ENDIF.
AUX_BORD = '19000101'.
GET PLANNED ORDER DATA FOR YESTERDAY
REFRESH IT_PLAF.
CLEAR: AUX_KAPBD, AUX_KBEAREST, AUX_KRUEREST, AUX_GSMNG.
SELECT * FROM PLAF INTO TABLE IT_PLAF
WHERE MATNR EQ IT_PKHD-MATNR
AND PLWRK EQ IT_PKHD-WERKS
AND ( PAART EQ 'KD' OR PAART EQ 'PE' )
AND RATID GT 0
AND PEDTR EQ AUX_YDAY.
IF NOT IT_PLAF[] IS INITIAL.
LOOP AT IT_PLAF.
REFRESH IT_KBED_KAKO.
SELECT KBED~KBEAREST KBED~KRUEREST KBED~KEINH
FROM KBED INNER JOIN KAKO
ON KBED~KAPID EQ KAKO~KAPID
INTO TABLE IT_KBED_KAKO
WHERE KBED~BEDID = IT_PLAF-RATID
AND KAKO~KAPAR = '001'.
IF NOT IT_KBED_KAKO[] IS INITIAL.
LOOP AT IT_KBED_KAKO.
IF IT_KBED_KAKO-KEINH NE 'STD'.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = IT_KBED_KAKO-KBEAREST
UNIT_IN = IT_KBED_KAKO-KEINH
UNIT_OUT = 'STD'
IMPORTING
OUTPUT = IT_KBED_KAKO-KBEAREST.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = IT_KBED_KAKO-KRUEREST
UNIT_IN = IT_KBED_KAKO-KEINH
UNIT_OUT = 'STD'
IMPORTING
OUTPUT = IT_KBED_KAKO-KRUEREST.
ENDIF.
ADD IT_KBED_KAKO-KBEAREST TO AUX_KBEAREST.
ADD IT_KBED_KAKO-KRUEREST TO AUX_KRUEREST.
CLEAR IT_KBED_KAKO.
ENDLOOP.
AUX_KAPBD = AUX_KBEAREST + AUX_KRUEREST.
ENDIF.
CLEAR IT_PLAF.
ENDLOOP.
ENDIF.
READ TABLE IT_KBED_KAKO INDEX 1.
MOVE: AUX_KAPBD TO IT_TEMP-KAPBD_OUTY,
IT_KBED_KAKO-KEINH TO IT_TEMP-KEINH_OUTY.
GET OUTPUT QUANTITY FOR YESTERDAY
REFRESH: IT_MKPF, IT_MSEG.
CLEAR: AUX_MENGE.
SELECT * FROM MKPF INTO TABLE IT_MKPF
WHERE BUDAT EQ AUX_PREVIOUS.
IF NOT IT_MKPF[] IS INITIAL.
GET MATERIAL DOCUMENT ITEM DATA
SELECT * FROM MSEG INTO TABLE IT_MSEG
FOR ALL ENTRIES IN IT_MKPF
WHERE MBLNR EQ IT_MKPF-MBLNR
AND MATNR IN SO_MATNR
AND WERKS IN SO_WERKS
AND MJAHR EQ SY-DATUM+0(4)
AND ( BWART EQ '131' OR BWART EQ '132' ).
IF NOT IT_MSEG[] IS INITIAL.
LOOP AT IT_MSEG.
AUX_MENGE = AUX_MENGE + IT_MSEG-MENGE.
CLEAR IT_MSEG.
ENDLOOP.
ENDIF.
ENDIF.
READ TABLE IT_MSEG INDEX 1.
MOVE: AUX_MENGE TO IT_TEMP-GSMNG_OUTY,
IT_MSEG-MEINS TO IT_TEMP-MEINS_OUTY.
CLEAR IT_T001W.
ENDIF.
ENDFORM. " GET_YESTERDAY_QTY
*& Form GET_BACKORDER_QTY
text
--> p1 text
<-- p2 text
FORM GET_BACKORDER_QTY .
GET PLANNED ORDER DATA FOR BACKORDER
REFRESH IT_PLAF.
CLEAR: AUX_KAPBD, AUX_KBEAREST, AUX_KRUEREST, AUX_GSMNG, AUX_QUANT.
SELECT * FROM PLAF INTO TABLE IT_PLAF
WHERE MATNR EQ IT_ZZC10-MATNR
AND PLWRK EQ IT_ZZC10-WERKS
AND ( PAART EQ 'KD' OR PAART EQ 'PE' )
AND RATID GT 0
AND PEDTR GE SO_BUDAT-LOW
AND PEDTR LE SY-DATUM.
IF NOT IT_PLAF[] IS INITIAL.
LOOP AT IT_PLAF.
CLEAR: AUX_TIMESTAMP1, AUX_TIMESTAMP2, AUX_PLAF_HR, AUX_DIFF.
EMPTY DATE GREATER THAN FULL DATE
CONCATENATE SY-DATUM SY-UZEIT
INTO AUX_TIMESTAMP1.
CONCATENATE IT_PLAF-PEDTR IT_PLAF-PEDTI
INTO AUX_TIMESTAMP2.
CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
EXPORTING
TIMESTAMP1 = AUX_TIMESTAMP1
TIMESTAMP2 = AUX_TIMESTAMP2
IMPORTING
DIFFERENCE = AUX_DIFF.
AUX_PLAF_HR = AUX_DIFF / 3600.
IF AUX_PLAF_HR > AUX_PKHD_TIME.
AUX_GSMNG = AUX_GSMNG + IT_PLAF-GSMNG.
REFRESH IT_KBED_KAKO.
SELECT KBEDKBEAREST KBEDKRUEREST KBED~KEINH
FROM KBED INNER JOIN KAKO
ON KBEDKAPID EQ KAKOKAPID
INTO TABLE IT_KBED_KAKO
WHERE KBED~BEDID = IT_PLAF-RATID
AND KAKO~KAPAR = '001'.
IF NOT IT_KBED_KAKO[] IS INITIAL.
LOOP AT IT_KBED_KAKO.
IF IT_KBED_KAKO-KEINH NE 'STD'.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = IT_KBED_KAKO-KBEAREST
UNIT_IN = IT_KBED_KAKO-KEINH
UNIT_OUT = 'STD'
IMPORTING
OUTPUT = IT_KBED_KAKO-KBEAREST.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = IT_KBED_KAKO-KRUEREST
UNIT_IN = IT_KBED_KAKO-KEINH
UNIT_OUT = 'STD'
IMPORTING
OUTPUT = IT_KBED_KAKO-KRUEREST.
ENDIF.
AUX_KBEAREST = AUX_KBEAREST + IT_KBED_KAKO-KBEAREST.
AUX_KRUEREST = AUX_KRUEREST + IT_KBED_KAKO-KRUEREST.
CLEAR IT_KBED_KAKO.
ENDLOOP.
AUX_KAPBD = AUX_KBEAREST + AUX_KRUEREST.
ENDIF.
ENDIF.
ENDLOOP.
READ TABLE IT_PLAF INDEX 1.
MOVE: AUX_GSMNG TO IT_TEMP-GSMNG_BORD,
IT_PLAF-MEINS TO IT_TEMP-MEINS_BORD.
READ TABLE IT_KBED_KAKO INDEX 1.
MOVE: AUX_KAPBD TO IT_TEMP-KAPBD_BORD,
IT_KBED_KAKO-KEINH TO IT_TEMP-KEINH_BORD.
ENDIF.
ENDFORM. " GET_BACKORDER_QTY
*& Form WEEKDAY
text
-->P_AUX_DATUMABSOLUT text
FORM WEEKDAY USING P_DATUMABSOLUT.
P_DATUMABSOLUT = P_DATUMABSOLUT MOD 7.
ENDFORM. " WEEKDAY
*& Form CHECK_WORKING_DAY
text
<--P_AUX_FLAG text
FORM CHECK_WORKING_DAY CHANGING P_FLAG.
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
DATE = SY-DATUM
FACTORY_CALENDAR_ID = AUX_FABKL
IMPORTING
DATE = AUX_FDAY
EXCEPTIONS
CALENDAR_BUFFER_NOT_LOADABLE = 1
CORRECT_OPTION_INVALID = 2
DATE_AFTER_RANGE = 3
DATE_BEFORE_RANGE = 4
DATE_INVALID = 5
FACTORY_CALENDAR_NOT_FOUND = 6
OTHERS = 7.
IF AUX_FDAY NE SY-DATUM.
AUX_FLAG = 'F'.
ENDIF.
ENDFORM. " CHECK_WORKING_DAY
*& Form DATE_WITH_OFFSET
text
-->P_0 text
<--P_AUX_TDAY text
FORM DATE_WITH_OFFSET USING AUX_OFFSET
CHANGING P_TDAY.
DATA:
AUX_CALENDARDATE LIKE SCAL-DATE,
AUX_FACTORYDATE LIKE SCAL-FACDATE.
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
DATE = SY-DATUM
FACTORY_CALENDAR_ID = AUX_FABKL
IMPORTING
FACTORYDATE = AUX_FACTORYDATE
EXCEPTIONS
CALENDAR_BUFFER_NOT_LOADABLE = 1
CORRECT_OPTION_INVALID = 2
DATE_AFTER_RANGE = 3
DATE_BEFORE_RANGE = 4
DATE_INVALID = 5
FACTORY_CALENDAR_NOT_FOUND = 6
OTHERS = 7.
AUX_FACTORYDATE = AUX_FACTORYDATE + AUX_OFFSET.
CALL FUNCTION 'FACTORYDATE_CONVERT_TO_DATE'
EXPORTING
FACTORYDATE = AUX_FACTORYDATE
FACTORY_CALENDAR_ID = AUX_FABKL
IMPORTING
DATE = AUX_CALENDARDATE
EXCEPTIONS
CALENDAR_BUFFER_NOT_LOADABLE = 1
FACTORYDATE_AFTER_RANGE = 2
FACTORYDATE_BEFORE_RANGE = 3
FACTORYDATE_INVALID = 4
FACTORY_CALENDAR_ID_MISSING = 5
FACTORY_CALENDAR_NOT_FOUND = 6
OTHERS = 7.
P_TDAY = AUX_CALENDARDATE.
ENDFORM. " DATE_WITH_OFFSET
*& Form GET_CUMULATIVE_OUTPUT
text
--> p1 text
<-- p2 text
FORM GET_CUMULATIVE_OUTPUT .
CLEAR: AUX_LOW, AUX_HIGH.
MOVE: SY-DATUM TO AUX_LOW,
SY-DATUM TO AUX_HIGH.
MOVE: '01' TO AUX_LOW+6(2),
'31' TO AUX_HIGH+6(2).
REFRESH IT_MKPF_MSEG.
CLEAR AUX_MNG.
SELECT MKPFMBLNR MKPFMJAHR MKPF~BUDAT
MSEGBWART MSEGMATNR MSEGMENGE MSEGMEINS MSEGDMBTR MSEGWERKS
INTO TABLE IT_MKPF_MSEG
FROM MKPF JOIN MSEG
ON MKPFMBLNR EQ MSEGMBLNR
WHERE MKPF~BUDAT BETWEEN AUX_LOW AND AUX_HIGH
AND MKPF~MJAHR EQ AUX_CURRENT+0(4)
AND MKPF~VGART EQ 'WS'
AND MSEG~ZEILE EQ 1
AND MSEG~WERKS EQ SO_WERKS
AND MSEG~MATNR EQ IT_PKHD-MATNR
AND MSEG~BWART IN ('131', '132').
IF NOT IT_MKPF_MSEG[] IS INITIAL.
LOOP AT IT_MKPF_MSEG.
AUX_MNG = AUX_MNG + IT_MKPF_MSEG-MENGE.
CLEAR IT_MKPF_MSEG.
ENDLOOP.
ENDIF.
MOVE AUX_MNG TO IT_TEMP-GSMNG_OUTM.
READ TABLE IT_MKPF_MSEG INDEX 1.
MOVE IT_MKPF_MSEG-MEINS TO IT_TEMP-MEINS_OUTM.
REFRESH IT_COBK.
SELECT DISTINCT BLPP~RUECK FROM BLPK INNER JOIN BLPP
ON BLPKPRTNR EQ BLPPPRTNR
INTO TABLE IT_COBK
WHERE BLPK~WERKS EQ SO_WERKS
AND BLPK~MATNR EQ SO_MATNR
AND BLPK~DATUM BETWEEN AUX_LOW
AND AUX_HIGH
AND BLPP~PRTPS EQ '0002'.
IF NOT IT_COBK[] IS INITIAL.
REFRESH IT_COEPL.
SELECT KOKRS BELNR FROM COBK
INTO CORRESPONDING FIELDS OF TABLE IT_COEPL
FOR ALL ENTRIES IN IT_COBK
WHERE REFBT EQ 'R'
AND REFBN EQ IT_COBK-RUECK
AND BLDAT BETWEEN AUX_LOW AND AUX_HIGH.
CLEAR IT_CAPACITIES.
REFRESH IT_CAPACITIES.
LOOP AT IT_COEPL.
SELECT LSBBTR MEINB FROM COEPL
APPENDING CORRESPONDING FIELDS OF TABLE IT_CAPACITIES
WHERE KOKRS EQ IT_COEPL-KOKRS
AND BELNR EQ IT_COEPL-BELNR
AND OBJNR LIKE '%DLABOR'.
CALL FUNCTION 'UNIT_SUM'
IMPORTING
QUANTITY_SUM = IT_TEMP-KAPBD_OUTM
UNIT_SUM = AUX_SUM_UNIT
TABLES
QUANTITIES_UNITS = IT_CAPACITIES.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = IT_TEMP-KAPBD_OUTM
UNIT_IN = AUX_SUM_UNIT
UNIT_OUT = 'STD'
IMPORTING
OUTPUT = IT_TEMP-KAPBD_OUTM.
ENDLOOP.
READ TABLE IT_CAPACITIES INDEX 1.
MOVE IT_CAPACITIES-MEINB TO IT_TEMP-KEINH_OUTM.
ENDIF.
ENDFORM. " GET_CUMULATIVE_OUTPUT
*& Form GET_FINISHEDGOODS_DATA
text
--> p1 text
<-- p2 text
FORM GET_FINISHEDGOODS_DATA .
GET PLANNED ORDER DATA
REFRESH IT_PLAF.
CLEAR: AUX_KAPBD, AUX_KBEAREST, AUX_KRUEREST, AUX_GSMNG.
SELECT * FROM PLAF INTO TABLE IT_PLAF
WHERE MATNR EQ IT_TEMP-FINISHED
AND ( PAART EQ 'KD' OR PAART EQ 'PE' )
AND RATID GT 0
AND PEDTR GE AUX_BORD
AND PEDTR LE AUX_DAY5.
IF NOT IT_PLAF[] IS INITIAL.
LOOP AT IT_PLAF.
CLEAR: AUX_KAPBD, AUX_GSMNG.
REFRESH IT_KBED_KAKO.
SELECT KBEDKBEAREST KBEDKRUEREST KBED~KEINH
FROM KBED INNER JOIN KAKO
ON KBEDKAPID EQ KAKOKAPID
INTO TABLE IT_KBED_KAKO
WHERE KBED~BEDID = IT_PLAF-RATID
AND KAKO~KAPAR = '001'.
IF NOT IT_KBED_KAKO[] IS INITIAL.
CLEAR AUX_KAPBD.
LOOP AT IT_KBED_KAKO.
IF IT_KBED_KAKO-KEINH NE 'STD'.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = IT_KBED_KAKO-KBEAREST
UNIT_IN = IT_KBED_KAKO-KEINH
UNIT_OUT = 'STD'
IMPORTING
OUTPUT = IT_KBED_KAKO-KBEAREST.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = IT_KBED_KAKO-KRUEREST
UNIT_IN = IT_KBED_KAKO-KEINH
UNIT_OUT = 'STD'
IMPORTING
OUTPUT = IT_KBED_KAKO-KRUEREST.
ENDIF.
ADD IT_KBED_KAKO-KBEAREST TO AUX_KBEAREST.
ADD IT_KBED_KAKO-KRUEREST TO AUX_KRUEREST.
CLEAR IT_KBED_KAKO.
ENDLOOP.
AUX_KAPBD = AUX_KBEAREST + AUX_KRUEREST.
ENDIF.
READ TABLE IT_KBED_KAKO INDEX 1.
CASE IT_PLAF-PEDTR.
WHEN AUX_DAY5.
AUX_GSMNG = IT_PLAF-GSMNG.
IT_TEMP-F_GSMNG_DAY5 = IT_TEMP-F_GSMNG_DAY5 + AUX_GSMNG.
IT_TEMP-F_MEINS_DAY5 = IT_PLAF-MEINS.
IT_TEMP-F_KAPBD_DAY5 = IT_TEMP-F_KAPBD_DAY5 + AUX_KAPBD.
IT_TEMP-F_KEINH_DAY5 = IT_KBED_KAKO-KEINH.
WHEN AUX_DAY4.
AUX_GSMNG = IT_PLAF-GSMNG.
IT_TEMP-F_GSMNG_DAY4 = IT_TEMP-F_GSMNG_DAY4 + AUX_GSMNG.
IT_TEMP-F_MEINS_DAY4 = IT_PLAF-MEINS.
IT_TEMP-F_KAPBD_DAY4 = IT_TEMP-F_KAPBD_DAY4 + AUX_KAPBD.
IT_TEMP-F_KEINH_DAY4 = IT_KBED_KAKO-KEINH.
WHEN AUX_DAY3.
AUX_GSMNG = IT_PLAF-GSMNG.
IT_TEMP-F_GSMNG_DAY3 = IT_TEMP-F_GSMNG_DAY3 + AUX_GSMNG.
IT_TEMP-F_MEINS_DAY3 = IT_PLAF-MEINS.
IT_TEMP-F_KAPBD_DAY3 = IT_TEMP-F_KAPBD_DAY3 + AUX_KAPBD.
IT_TEMP-F_KEINH_DAY3 = IT_KBED_KAKO-KEINH.
WHEN AUX_DAY2.
AUX_GSMNG = IT_PLAF-GSMNG.
IT_TEMP-F_GSMNG_DAY2 = IT_TEMP-F_GSMNG_DAY2 + AUX_GSMNG.
IT_TEMP-F_MEINS_DAY2 = IT_PLAF-MEINS.
IT_TEMP-F_KAPBD_DAY2 = IT_TEMP-F_KAPBD_DAY2 + AUX_KAPBD.
IT_TEMP-F_KEINH_DAY2 = IT_KBED_KAKO-KEINH.
WHEN AUX_DAY1.
AUX_GSMNG = IT_PLAF-GSMNG.
IT_TEMP-F_GSMNG_DAY1 = IT_TEMP-F_GSMNG_DAY1 + AUX_GSMNG.
IT_TEMP-F_MEINS_DAY1 = IT_PLAF-MEINS.
IT_TEMP-F_KAPBD_DAY1 = IT_TEMP-F_KAPBD_DAY1 + AUX_KAPBD.
IT_TEMP-F_KEINH_DAY1 = IT_KBED_KAKO-KEINH.
WHEN AUX_TDAY.
AUX_GSMNG = IT_PLAF-GSMNG.
IT_TEMP-F_GSMNG_TDAY = IT_TEMP-F_GSMNG_TDAY + AUX_GSMNG.
IT_TEMP-F_MEINS_TDAY = IT_PLAF-MEINS.
IT_TEMP-F_KAPBD_TDAY = IT_TEMP-F_KAPBD_TDAY + AUX_KAPBD.
IT_TEMP-F_KEINH_TDAY = IT_KBED_KAKO-KEINH.
WHEN OTHERS.
AUX_GSMNG = IT_PLAF-GSMNG.
IT_TEMP-F_GSMNG_BORD = IT_TEMP-F_GSMNG_BORD + AUX_GSMNG.
IT_TEMP-F_MEINS_BORD = IT_PLAF-MEINS.
IT_TEMP-F_KAPBD_BORD = IT_TEMP-F_KAPBD_BORD + AUX_KAPBD.
IT_TEMP-F_KEINH_BORD = IT_KBED_KAKO-KEINH.
ENDCASE.
IT_TEMP-F_GSMNG_OUTN = IT_TEMP-F_GSMNG_OUTN + AUX_GSMNG.
IT_TEMP-F_KAPBD_OUTN = IT_TEMP-F_KAPBD_OUTN + AUX_KAPBD.
ENDLOOP.
READ TABLE IT_PLAF INDEX 1.
MOVE IT_PLAF-MEINS TO IT_TEMP-F_MEINS_OUTN.
READ TABLE IT_KBED_KAKO INDEX 1.
MOVE IT_KBED_KAKO-KEINH TO IT_TEMP-F_KEINH_OUTN.
ENDIF.
ENDFORM. " GET_FINISHEDGOODS_DATA
*& Form GET_ACTUAL_MONTH_DATA
text
--> p1 text
<-- p2 text
FORM GET_ACTUAL_MONTH_DATA .
CLEAR: AUX_LOW, AUX_HIGH.
MOVE: '01' TO SO_BUDAT-LOW+6(2),
SO_BUDAT-LOW TO AUX_LOW,
'31' TO SO_BUDAT-LOW+6(2),
SO_BUDAT-LOW TO AUX_HIGH.
REFRESH IT_MKPF_MSEG.
CLEAR AUX_MNG.
SELECT MKPFMBLNR MKPFMJAHR MKPF~BUDAT
MSEGBWART MSE

Hi Ramya,
Your program contains a lot of BIG standard tables, these tables
usually contain huge amount of data,
plus you have used SELECT * in many places, try to avoid that and replace with only those field names that are reqd.
even the joins are on huge tables, performance could improve on those if you can put some more conditions or keys to the joins to make it more specific.
even after that if it gives the Runtime Error then you have 2 options:
1. Ask your Basis to increase Time limit for program executing in foreground.
2. Execute your program in Background Mode.
Regards,
Samson Rodrigues.

Performance issue in Webi rep when using custom object from SAP BW univ

Hi All,
I had to design a report that runs for the previous day and hence we had created a custom object which ranks the dates and then a pre-defined filter which picks the date with highest rank.
the definition for the rank variable(in universe) is as follows:
<expression>Rank([0CALDAY].Currentmember, Order([0CALDAY].Currentmember.Level.Members ,Rank([0CALDAY].Currentmember,[0CALDAY].Currentmember.Level.Members), BDESC))</expression>
Now to the issue I am currently facing,
The report works fine when we ran it on a test environment ie :with small amount of data.
Our production environment has millions of rows of data and when I run the report with filter it just hangs.I think this is because it tries to rank all the dates(to find the max date) and thus resulting in a huge performance issue.
Can someone suggest how this performance issue can be overcome?
I work on BO XI3.1 with SAP BW.
Thanks and Regards,
Smitha.

Hi,
Using a variable on the BW side is not feasible since we want to use the same BW query for a few other reports as well.
Could you please explain what you mean by 'use LAG function'.How can it be used in this scenario?
Thanks and Regards,
Smitha Mohan.

Performance Issue in Order.jsp

Similar Messages

Maybe you are looking for