Performance Issue with BTF editor( BSP application when Calling in WD ABAP)
Hi All,
In one of the requirement, I am trying to call the BTF Editor From WD ABAP application.
When i am trying to open the BTF Editor, it is taking time to load.
Can any one help men on this ....What I need to do in BTF Editor / WD ABAP application to improve the performance.
Thanks in Advance,
Aneel
These really aren't web dynpro abap questions. Web Dynpro ABAP is just the frame around the BSP and you are really asking questions about the use of the BTF within BSP. I think these questions would be better suited to the BSP forum. I will move this thread to that forum. However before I do, I should warn you that such iFrame integrate is not recommended. The iFrame is actually deprecated in 7.0 and 7.01 (but does return to support in 7.02). You should note that the iframe has no session management and the BSP within the iFrame will have a separate user session from the surrounding Web Dynpro ABAP. The recommendation for such integration is to use the Portal or the NWBC and integrate these ase two different iViews within one Portal Page. In 7.02, you could also use the Page Builder and a URL CHIP to perform this integration.
Similar Messages
-
Performance issues with Motion (position, scale, rotate) and GTX 590
I'm experiencing performance issues with my Premiere Pro CC when I scale, position or rotate a clip in the program monitor.
I have no performance issues with playback! It's only, when i move something with the mouse or by changing the x,y-values of Position in the Motion-Dialog in video effects.
Premiere then lags terribly and updates the program monitor only about once per second - this makes it very difficult and cumbersome to work and position things.
On a second Premiere installation on my laptop, performance is fine and fluid - allthough it doesn't have GPU support and is a much slower computer.
I'm pretty sure this has somehow to do with my graphic card, which is a Nvidia GTX 590.
I was told by the support, that it is actually a dual graphic card, which is not supported/liked by Premiere.
The thing is, until the latest Premiere update, I did not have performance issues at all with this card.
I also read on the forum that others with the GTX 590 did not experience any problems with it
So where does this come from?
There is no change in performance whether or not I activate Mercury Playback Engine GPU acceleration.
I also tried deactivating one of the 2 gpus, but there also was no change.
Does anyone else know this problem and has anyone a solution?
I'm running Premiere CC on a Win 7 64bit engine, Nvidia GTX 590, latest driver (of today),I am suffering from the same phenomenon since I updated just before christmas, I think.
I am hardly able to do scaling, rotating and translating in the program monitor itslef - whil motion has been highlighted in teh effect controls.
In the effect controls I can scale, rotate etc however.
Also I have noticed there is a yellow box with handles in teh program monitor. I remember it was white before.
I cannot figure out what to change in my preferences. What has happened?
best,
Hans Wessels
Premiere CC
Mac Pro OSX 10.7.5
16 GB 1066 MHz DD3
2 X NVIDIA GeForce GT 120 512 MB -
Performance issues with Planning data load & Agg in 11.1.2.3.500
We recently upgraded from 11.1.1.3 to 11.1.2.3. Post upgrade we face performance issues with one of our Planning job (eg: Job E). It takes 3x the time to complete in our new environment (11.1.2.3) when compared to the old one (11.1.1.3). This job loads then actual data and does the aggregation. The pattern which we noticed is , if we run a restructure on the application and execute this job immediately it gets completed as the same time as 11.1.1.3. However, in current production (11.1.1.3) the job runs in the following sequence Job A->Job B-> Job C->Job D->Job E and it completes on time, but if we do the same test in 11.1.2.3 in the above sequence it take 3x the time . We dont have a window to restructure the application to before running Job E every time in Prod. Specs of the new Env is much higher than the old one.
We have Essbase clustering (MS active/passive) in the new environment and the files are stored in the SAN drive. Could this be because of this? has any one faced performance issues in the clustered environment?Do you have exactly same Essbase config settings and calculations performing AGG ? . Remember something very small like UPDATECALC ON/OFF can make a BIG difference in timing..
-
Hi all,
I'm facing some performance issues with Spry. I'm using it
for handling a menubar acting as a rollover menu : its color
changes under mouse cursor, and a submenu does appear at the same
time.
I have no problem when working with Firefox, but in IE6, it
renders too slowly
Is there something I've missed in the configuration or code
(or is there some tips for this kind of problem) ?
For information, I used UL and LI html tags, and I've
configured Spry to render these as a menubar (with multiple levels)
Thanks for your responseSorry, there are no public access to this application
:-( -
Performance issue with Jdeveloper
Hi Guys,
I am experiencing strange performance issue with Jdeveloper 10.1.3.3.0.4157. There are many other threads regarding the performance issue in this forum, but the problem I have is a little bit different.
I have two computers: one is Athlon 3200+ with Vista and another one is P4 dual core 6400 with XP (service pack 2). Both of them have 2GB memory.
I am running the same simple project on both computer, but only the one with Vista has the problem. The problem is very similar to the problem mentioned in the thread:
Re: IDE has become extremely slow?
But it's much worse. It only happens only on JSF pages. Basically, any operations on the JSF pages are very slow. Loading the page, changing the attributes of a button in source editor, or even clicking the items in the design view take forever to run.
The first weird thing is that it may use 100% CPU, but it never recover, which means the 100% CPU usage never stops or when it stops, the Jdeveloper stops responding.
The second weird thing is that the project is not big. Actually, it's very small. The problem started to happen since last week. There are not big changes during the period. The only thing I can say is that we created two more JSF pages.
The third weird thing is that the same project never happened on the P4+XP box. When I open the project on the P4+XP box, it’s always fast and no CPU spike.
Any advises are welcome!
Thanks,
StevenHi Guys,
I re-made a simple test project for this problem and now I now always reproduce the problem in JDeveloper on both system (XP & Vista). Everytime I open this jspx file in the source editor and try to scroll up/down the source file, or manually delete an attribute, JDeveloepr will hang and the CPU usage is 0%.
Here is the content of the test file:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
<afh:html binding="#{backing_streettypedetail.html1}" id="html1">
<afh:head title="streettypedetail"
binding="#{backing_streettypedetail.head1}" id="head1">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
</afh:head>
<afh:body binding="#{backing_streettypedetail.body1}" id="body1">
<af:messages binding="#{backing_streettypedetail.messages1}"
id="messages1"/>
<h:form binding="#{backing_streettypedetail.form1}" id="form1">
<af:panelForm binding="#{backing_streettypedetail.panelForm1}"
id="panelForm1">
<af:inputText value="#{bindings.streetTypeID.inputValue}"
label="#{bindings.streetTypeID.label}"
required="#{bindings.streetTypeID.mandatory}"
columns="#{bindings.streetTypeID.displayWidth}"
binding="#{backing_streettypedetail.inputText1}"
id="inputText1">
<af:validator binding="#{bindings.streetTypeID.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.description.inputValue}"
label="#{bindings.description.label}"
required="#{bindings.description.mandatory}"
columns="#{bindings.description.displayWidth}"
binding="#{backing_streettypedetail.inputText2}"
id="inputText2">
<af:validator binding="#{bindings.description.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.abbr.inputValue}"
label="#{bindings.abbr.label}"
required="#{bindings.abbr.mandatory}"
columns="#{bindings.abbr.displayWidth}"
binding="#{backing_streettypedetail.inputText3}"
id="inputText3">
<af:validator binding="#{bindings.abbr.validator}"/>
</af:inputText>
<f:facet name="footer">
<h:panelGroup binding="#{backing_streettypedetail.panelGroup1}"
id="panelGroup1">
<af:commandButton text="Save"
binding="#{backing_streettypedetail.saveButton}"
id="saveButton"
actionListener="#{bindings.mergeEntity.execute}"
action="#{userState.retrieveReturnNavigationRule}"
disabled="#{!bindings.mergeEntity.enabled}"
partialSubmit="false">
<af:setActionListener from="#{true}"
to="#{userState.refresh}"/>
</af:commandButton>
<af:commandButton text="Cancel"
binding="#{backing_streettypedetail.cancelButton}"
action="#{userState.retrieveReturnNavigationRule}"
id="cancelButton">
<af:setActionListener from="#{false}"
to="#{userState.refresh}"/>
</af:commandButton>
</h:panelGroup>
</f:facet>
</af:panelForm>
</h:form>
</afh:body>
</afh:html>
</f:view>
<!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_streettypedetail-->
</jsp:root>
Can anybody take a look at the file and let me know what's wrong with it?
Thanks in advance.
Steven -
BPC 7 performance issue with Microsoft 2003 vs Microsoft 2007
Hi All,
Needs some help with our performance issues with BPC 7 on Microsoft 2007. We have noticed a significant difference between the two versions. When running the same report on BPC 7 MS 2003 it takes roughly around 5-6 min. When running the same report in BPC 7 MS 2007 the report takes roughly 15-20 min. We've tried numerous things to figure out what can be causing this but does anyone have the same issue or shed some light as to what i can do to eliminate this problem?
Thanks,
ElmerHi,
Did you install the following component on your application server (which is a prerequisite for running Excel 2007)? This note is part of the installation guide:
In order for the software to function correctly in Excel 2007, you must install the Microsoft Office 2007 system driver Data Connectivity Components, which you can get from the Microsoft web site. The components must be installed on the Application server. We recommend that you install all of the latest Microsoft Windows hotfixes prior to installing the Administration client. For information about which hotfixes to install, see http://www.microsoft.com/downloads/details.aspx?FamilyID=7554F536-8C28-4598-9B72-EF94E038C891&DisplayLang=en.
Hope this will help.
Kind Regards,
Patrick -
Performance Issue with SXMB_MONI
Hi All,
I have a typical performance issue with SXMB_MONI, when I trigger this T.code it is taking around 20-24 hrs to execute.
Here I have found some tables which actually stores these processed xml messages,
SXMSPFADDRESS
SXMSPFRAWH
RSXMB_REMOTE_SERVICE
SXMSPFAGG
SXMSCONFVL
SXMSPMAST
SXMSPEMAS, SXMSPERROR, SXMSPMAST & SXMSPVERS.
SXMSPMAST, SXMSPMAST2, SXMSCLUR, SXMSCLUR2,
SXMSCLUP, SMXSLUP2, SXMSPFRAWH,
Here I want to increase the performance of sxmb_moni, firstly I want to know from which tables does the sxmb_moni fetches data and more over is it a single table or multiple table.
And please suggest any technique which can decrease the latency time in executing sxmb_moni.
Regards,
Vijay NHi,
Periodically you need to archive the XI messages, that allows you to maintain sufficient performance level.
Create archive jobs in SXMB_ADM to archive data which is 15 days old from XI related growing tables like SXMSCLUR, SXMSPEMAS, SXMSPHIST, SXMSPMAST, SXMSPVERS, SXMSPFRAW ,SWWWIHEAD. This archive job created archive files at the OS Level
For XI tables refer
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
SXMSPMAST, SXMSCLUP, SXMSPCLUR
the last two are cluster tables
and you won't get XML messages directly from them
have a look inside them
The classes that reads this information in SXMB_MONI are abap classes,
(can be seen at SE24) it is quite difficult to use them,
you might debug SXMB_MONI or use SE30 and see all the classes
that have been used.
You can use value mapping if you are not looking at picking up values from application system.It is just like SM30 transcation.You can get the info under SAP XI->Design and Configuration->Configuration->Value Mapping.
Also see the
these tables,
/SAPDMC/LSOMAP Field Mapping
/SAPTRX/SCAOTMAP
/SAPTRX/SCCNDMAP /SAPTRX/SCEVTMAP
/SAPTRX/SCFUNMAP /SAPTRX/SCSOMAP
/people/udo.martens/blog/2006/02/16/own-logging-of-xi-messages
message-mappings: stored in which database-table?
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
http://help.sap.com/saphelp_nw04s/helpdata/en/44/a1b46c4c686341e10000000a114a6b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ef/45393c3eb3036be10000000a11402f/frameset.htm
Thanks
Swarup -
Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade
We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5. I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed. Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile. This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse. We see there is a high use of java script, and the processors canu2019t handle this. When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues. When we login to tcode LM00, with the RF scanners, the system is very slow. It might take 30 seconds to confirm one item on a WM Transfer Order.
1.) Can we revert back to Web SAP Console, after we have upgraded to EHP5?
2.) What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies. One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.Tom,
I am sorry I did not see this earlier.
I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
Let me know if I can answer more questions related to this topic.
Cheers,
Shari -
Performance issues with pipelined table functions
I am testing pipelined table functions to be able to re-use the <font face="courier">base_query</font> function. Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? The <font face="courier">processor</font> function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
TYPE resultset_typ IS REF CURSOR;
TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
TYPE table_typ IS TABLE OF row_typ;
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ;
c_default_limit CONSTANT PLS_INTEGER := 100;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ
IS
o_resultset resultset_typ;
BEGIN
OPEN o_resultset FOR
SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB;
RETURN o_resultset;
END base_query;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
IS
aa_source_data table_typ;-- := table_typ ();
BEGIN
LOOP
FETCH p_source_data
BULK COLLECT INTO aa_source_data
LIMIT p_limit_size;
EXIT WHEN aa_source_data.COUNT = 0;
/* Process the batch of (p_limit_size) records... */
FOR i IN 1 .. aa_source_data.COUNT
LOOP
PIPE ROW (aa_source_data (i));
END LOOP;
END LOOP;
CLOSE p_source_data;
RETURN;
END processor;
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT /*+ PARALLEL(t, 5) */ colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM TABLE (processor (base_query (argA, argB),100)) t
GROUP BY colC
ORDER BY colC
END with_pipeline;
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM (SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB)
GROUP BY colC
ORDER BY colC;
END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PMEarthlink wrote:
Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701 -
Performance issues with Homesharing?
I have a Time Capsule as the base station for my wireless network, then 2 Airport Express setup to extend the network around the house, an iMac i7 as the main iTunes Library and couple of iPads, and a couple of Apple TVs. Everything has the latest software, but I have several performance issues with Home sharing. I've done several tests making sure nothing is taking additional bandwidth, so here are the list of issues:
1) With nothing else running, trying playing a movie via home sharing in an iPad 2 which is located on my iMac, it stops and I have to keep pressing the play button over and over again. I typically see that the iPad tries to download part of the movie first and then starts playing so that it deals with the bandwidth, but in many cases it doesn't.
2) When trying to play any iTunes content (movies, music, photos, etc) from my Apple TV I can see my computer library, but when I go in on any of the menus, it says there's no content. I have to reboot the Apple TV and then problem fixed. I's just annoying that I have to reboot.
3) When watching a Netflix movie on my iPad and with Airplay I send the sound to some speakers via Airplay through an Airport Express. At time I lose the connection to the speakers.
I've complained about Wifi's instability, but here I tried to keep everything with Apples products to avoid any compatibility issues and stay within N wireless technology, which I understood it was much more stable.
Has anyone some suggestions?Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim -
Performance Issues with large XML (1-1.5MB) files
Hi,
I'm using an XML Schema based Object relational storage for my XML documents which are typically 1-1.5 MB in size and having serious performance issues with XPath Query.
When I do XPath query against an element of SQLType varchar2, I get a good performance. But when I do a similar XPath query against an element of SQLType Collection (Varray of varchar2), I get a very ordinary performance.
I have also created indexes on extract() and analyzed my XMLType table and indexes, but I have no performance gain. Also, I have tried all sorts of storage options available for Collections ie. Varray's, Nested Tables, IOT's, LOB's, Inline, etc... and all these gave me same bad performance.
I even tried creating XMLType views based on XPath queries but the performance didn't improve much.
I guess I'm running out of options and patience as well.;)
I would appreciate any ideas/suggestions, please help.....
Thanks;
Ramakrishna ChintaAre you having similar symptoms as I am? http://discussions.apple.com/thread.jspa?threadID=2234792&tstart=0
-
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Performance Issues with crystal reports 11 - Critical
Post Author: DJ Gaba
CA Forum: Exporting
I have migrated from crystal reports version 8 to version 11.
I am experiencing some performance issues with reports when displayed in version 11
Reports that was taking 2 seconds in version 8 is now taking 4-5 seconds in versino 11
I am using vb6 to export my report file into pdf
ThanksPost Author: synapsevampire
CA Forum: Exporting
Pleae don't multiple forums on the site with the same question.
I responded to your other post.
-k -
Performance Issues with Folio format in Ipad.
Hello everyone! My FIRST post here!!!
I work with educational games and I'm facing performance issues with games that I've made in HTML5 to play in Ipad. I tried to import them to the format folio in DPS (Adobe Digital Publishing Suite). However when I import the HTML game into Indesign and try to preview it in Adobe content viewer, the game doesn't open or works without perform properly (there is a lag that doesn't let you play the game with a little of fun).
The games that I've created have a memory use max of 35mb and weighs 30mb max.
Does anyone know what's happen and what I can do to fix that performance issue?
Thanks a lot!Moved to DPS
-
Performance issues with FDK in large XML documents
In my current project with FrameMaker 8 I'm experiencing severe performance issues with some FDK API calls.
The documents are about 3-8 MBytes in size. Fortmatted they cover 150-250 pages.
When importing such an XML document I do some extensive "post-processing" using FDK. This processing happens in Sr_EventHandler() during the SR_EVT_END_READER event. I noticed that some FDK functions calls which modify the document's structure, like F_ApiSetAttribute() or F_ApiNewElementInHierarchy(), take several seconds, for the larger documents even minutes, to complete one single function call. I tried to move some of these calls to earlier events, mostly to SR_EVT_END_ELEM. There the calls work without a delay. Unfortunately I can't rewrite the FDK client to move all the calls that are lagging to earlier events.
Does anybody have a clue why such delays happen, and possibly can make a suggestion, how to solve this issue? Thank you in advance.
PS: I already thought of splitting such a document in smaller pieces by using the FrameMaker book function. But I don't think, the structure of the documents will permit such an automatic split, and it definitely isn't an option to change the document structure (the project is about migrating documents from Interleaf to XML with the constraint of keeping the document layout identical).FP_ApplyFormatRules sounds really good--I'll give it a try on Monday. Wonder how I could miss it, as I already tried FP_Reformatting and FP_Displaying at no avail?! By the way, what is actually meant with FP_Reformatting (when I used it I assumed it would do exactly what FP_ApplyFormatRules sounds to do), or is that one another of Lynne's well-kept secrets?
Thank's for all the helpful suggestions, guys. On Friday I already had my first improvements in a test version of my client: I did some (not all necessary) structural changes using XSLT pre-processing, and processing went down from 8 hours(!) to 1 hour--Yeappie! I was also playing with the idea of writing a wrapper to F_ApiNewElementInHierarchy() which actually pastes an appropriate element created in a small flow on the reference pages at the intended insertion location. But now, with FP_ApplyFormatRules on the horizon, I'm quite confident to get even the complicated stuff under control, which cannot be handled by the XSLT pre-processing, as it is based on the actual formatting of the document at run-time and cannot be anticipated in pre-processing.
--Franz
Maybe you are looking for
-
Is there a way to block the pop up window for Spotlight in Yosemite?
I want to keep the search in the corner of the screen and out of my way when I'm watching a video/multitasking. It is getting in the way of a lot of my work. I can't even move the window from the center of the screen. If not then spotlight is now jus
-
Incorrect entity mapping in FrameMaker 11 and 12 - A FYI!
In testing round tripping of XML to FrameMaker to XML I came across a particular ISO character 'lsquo' (Unicode x2018) which FrameMaker happily converted to the equivalent internal character xd4, and then promptly converted it to the entity 'rsquor'
-
Assigning infotypes to infogroups and usergroup (country specific)
I am an abapper so I apologise for what may be a too basic question, but I have searched and not able to find complete answer. I have a situation where I am using 1 User group i.e. '07' which is assigned to Infogroup 'Z1' which is for Hire Action 'Z1
-
Hello, Variant pricing configuring steps Can anyone explain the steps in details for configuring this with explanation of class type. Full points will be awarded for good answers. Thanks, Anil Rajpal
-
When using tethered capture I often get this notification "The metadata for this photo has been changed by both Lightroom and another application". This slows or stalls the loading of incoming photos. How do I find out which other application is chan