Performance Issue with Concurrent Program
Hi Gurus,
I have a loader program which updates some information in the OM sales orders, this is been done using oe_order_pub.process_order and I do not see any performance issue in the package.
Using this program i had tried to update some huge number of orders uand it gets completed in few minutes, but at times this program runs for more than 6-7 hours even with
Pls could anyone advise what could be the issue with this?
Thanks & Regards,
Genoo
I have a loader program which updates some information in the OM sales orders, this is been done using oe_order_pub.process_order and I do not see any performance issue in the package.
Using this program i had tried to update some huge number of orders uand it gets completed in few minutes, but at times this program runs for more than 6-7 hours even with
Pls could anyone advise what could be the issue with this?Do you have the statistics collected up to date?
Can you find any errors in the database log file?
Any locks in the database?
Any invalid objects?
Please enable trace and generate the TKPROF file once the program is completed.
Thanks,
Hussein
Similar Messages
-
Performance issue with a program in HR-ABAP
Hi All,
I have a program that is taking very much time to execute please suggest some solution. I am pasting the main code below.
<large code part removed by moderator>
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Moderator message: please post only relevant code parts, otherwise formatting is lost.
Edited by: Thomas Zloch on Mar 1, 2011 11:11 AM>
Aaron Shover wrote:
> OK, Aditya, I added another type pool to my program and I can now use the same type that SAP is using.
>
> Thanks for pointing out the [obvious] solution that I was overlooking!
>
> Aaron
Aaron, I was not aware of the type pools as mentioned I don't have access to the system at the moment. But type pool has type declarations as well, so what I meant was pulling out the 2 declarations that you need into your Z program could have solved the problem :). Which will happen now since you've included the type pools.
Anyways good to know that you problem is solved.
Cheers,
Advait -
Performance issue with BW Reports for concurrent users
All:
I notice that one BW report that runs in few seconds will take upto 3.5 minutes when multiple users run it at the same time.
We are in BW 3.5 and we run reports for portal.
Does anyone have any suggestion about how to handle performance issue with concurrent users?
Thanks,
PranabHi,
use the OLAP-cache and/or aggregates and consider using load balancing to distribute the users to several servers.
Kind regards
/martin -
Performance issue in customized program with do-enddo
Hi,
We have a performance issue in customized program.
In this program he used do-enddo twice. I mean nested do-endo.
How can we increase the performance.
And when we did the code inspector it displays 9 errors 'Char. strings w/o text elements will not be translated'.
Is there any performance issue for this error?
Regards,
Chandu.
Moderator message - Cross post locked
Edited by: Rob Burbank on Oct 20, 2009 12:42 PM> 'Char. strings w/o text elements will not be translated'.
> Is there any performance issue for this error?
No, this is just not so clean programming. As for the rest, Please Read before Posting in the Performance and Tuning Forum and learn how to find out where the showstoppers really are.
Thomas -
Performance Issues with SDV03V02
Hi,
The order rescheduling program(SDV03V02) runtime is too long. We have searched for notes in the OSS database but have not found any suitable notes. One of the oss notes suggested implementing indexes on VAPMA and VBUK but that has not helped either. We are thinking of writing a Z program which would submit the standard SAP program into multiple jobs-The Z program would schedule the program into multiple jobs using different sets of materials.
Has anyone faced runtime issues with this program? Any other suggestions?
Regards,
AravindAravind,
the program invokes availability check for all backourders based on material.
I would check the following :
- how many documents it's going to process ?
- if the number of documents is too big and there are really old docs - you may have a problem with order status update (your order never goes to "complete" status even if all items are rejected or fully shipped - just an example)....
- if you really need to reschedule many orders - you'll have to consider parallel rescheduling.... BUT it's not as simple as submit parallel jobs for different materials (material ranges)....as jobs will very likely fail due to a contention.
- another option to speed up the process (may really help) is to change timing of all order outputs which are set to process immediately to '1' -> to be processed via RSNAST00, then schedule a job after your rescheduling is complete to process all these outputs. It may really help as you separate output processing from avail.check/order save.... and since same order may be saved several times during rescheduling -> it may really help. You can do it by defining a "timing" routine for your output types.
- always good to run SQL trace or to just monitor this job in SM50 to see what it's doing... OR run it under new USER ID and check statistics for that ID to see which programs/tables took the most time.
Would be good to measure an average order processing time (check how many orders were processed in this job... I hope it has this info in the spool or you can calculate it based on messages in job log). It may help to determine if the problem is casued by too slow order processing or just by increased order volume.
There are many options to look at regarding rescheduling...but I would start from order processing performance. -
Performance issues with Bapi BAPI_MATERIAL_AVAILABILITY...
Hello,
I have a Z program to check ATP which is working with Bapi BAPI_MATERIAL_AVAILABILITY....
As I am in the retail system we have performance issues with this bapi due the huge amount of articles in the system we need to calculate the ATP.
any way to improve the performance?
Thanks and best regards
LThe BAPI appears to execute for only one plant/material, etc., at a time, so I would have to concentrate on making data retrieval and post-bapi processing as efficient as possible. In your trace output, how much of your overall time is consumed by the BAPI? How much by the other code? You might find improvements there...
-
Performance issues with Motion (position, scale, rotate) and GTX 590
I'm experiencing performance issues with my Premiere Pro CC when I scale, position or rotate a clip in the program monitor.
I have no performance issues with playback! It's only, when i move something with the mouse or by changing the x,y-values of Position in the Motion-Dialog in video effects.
Premiere then lags terribly and updates the program monitor only about once per second - this makes it very difficult and cumbersome to work and position things.
On a second Premiere installation on my laptop, performance is fine and fluid - allthough it doesn't have GPU support and is a much slower computer.
I'm pretty sure this has somehow to do with my graphic card, which is a Nvidia GTX 590.
I was told by the support, that it is actually a dual graphic card, which is not supported/liked by Premiere.
The thing is, until the latest Premiere update, I did not have performance issues at all with this card.
I also read on the forum that others with the GTX 590 did not experience any problems with it
So where does this come from?
There is no change in performance whether or not I activate Mercury Playback Engine GPU acceleration.
I also tried deactivating one of the 2 gpus, but there also was no change.
Does anyone else know this problem and has anyone a solution?
I'm running Premiere CC on a Win 7 64bit engine, Nvidia GTX 590, latest driver (of today),I am suffering from the same phenomenon since I updated just before christmas, I think.
I am hardly able to do scaling, rotating and translating in the program monitor itslef - whil motion has been highlighted in teh effect controls.
In the effect controls I can scale, rotate etc however.
Also I have noticed there is a yellow box with handles in teh program monitor. I remember it was white before.
I cannot figure out what to change in my preferences. What has happened?
best,
Hans Wessels
Premiere CC
Mac Pro OSX 10.7.5
16 GB 1066 MHz DD3
2 X NVIDIA GeForce GT 120 512 MB -
Performance Issue with Broadcaster
Hi,
I am facing a performance issue with Broadcaster.
We use the broadcasting program in the Process Chain, and the program takes time to execute.
It is not performance with data . The query executes fastly without taking much time.
What can be the reason? How can we reduce the time taken for the broadcasting?
Thanks in advance
Regards,
tinkugeoThen you must have a 4S without realizing it. In any case Apple does not support downgrading. Once on 8 you cannot go back. Try resetting the phone. Hold on the power and home buttons at the same time until the Apple logo appears.
-
Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?
Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks -
Performance issues with pipelined table functions
I am testing pipelined table functions to be able to re-use the <font face="courier">base_query</font> function. Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? The <font face="courier">processor</font> function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
TYPE resultset_typ IS REF CURSOR;
TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
TYPE table_typ IS TABLE OF row_typ;
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ;
c_default_limit CONSTANT PLS_INTEGER := 100;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ
IS
o_resultset resultset_typ;
BEGIN
OPEN o_resultset FOR
SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB;
RETURN o_resultset;
END base_query;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
IS
aa_source_data table_typ;-- := table_typ ();
BEGIN
LOOP
FETCH p_source_data
BULK COLLECT INTO aa_source_data
LIMIT p_limit_size;
EXIT WHEN aa_source_data.COUNT = 0;
/* Process the batch of (p_limit_size) records... */
FOR i IN 1 .. aa_source_data.COUNT
LOOP
PIPE ROW (aa_source_data (i));
END LOOP;
END LOOP;
CLOSE p_source_data;
RETURN;
END processor;
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT /*+ PARALLEL(t, 5) */ colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM TABLE (processor (base_query (argA, argB),100)) t
GROUP BY colC
ORDER BY colC
END with_pipeline;
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM (SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB)
GROUP BY colC
ORDER BY colC;
END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PMEarthlink wrote:
Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701 -
Performance issues with Homesharing?
I have a Time Capsule as the base station for my wireless network, then 2 Airport Express setup to extend the network around the house, an iMac i7 as the main iTunes Library and couple of iPads, and a couple of Apple TVs. Everything has the latest software, but I have several performance issues with Home sharing. I've done several tests making sure nothing is taking additional bandwidth, so here are the list of issues:
1) With nothing else running, trying playing a movie via home sharing in an iPad 2 which is located on my iMac, it stops and I have to keep pressing the play button over and over again. I typically see that the iPad tries to download part of the movie first and then starts playing so that it deals with the bandwidth, but in many cases it doesn't.
2) When trying to play any iTunes content (movies, music, photos, etc) from my Apple TV I can see my computer library, but when I go in on any of the menus, it says there's no content. I have to reboot the Apple TV and then problem fixed. I's just annoying that I have to reboot.
3) When watching a Netflix movie on my iPad and with Airplay I send the sound to some speakers via Airplay through an Airport Express. At time I lose the connection to the speakers.
I've complained about Wifi's instability, but here I tried to keep everything with Apples products to avoid any compatibility issues and stay within N wireless technology, which I understood it was much more stable.
Has anyone some suggestions?Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim -
Performance issues with the Vouchers index build in SES
Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES> -
Performance Issues with large XML (1-1.5MB) files
Hi,
I'm using an XML Schema based Object relational storage for my XML documents which are typically 1-1.5 MB in size and having serious performance issues with XPath Query.
When I do XPath query against an element of SQLType varchar2, I get a good performance. But when I do a similar XPath query against an element of SQLType Collection (Varray of varchar2), I get a very ordinary performance.
I have also created indexes on extract() and analyzed my XMLType table and indexes, but I have no performance gain. Also, I have tried all sorts of storage options available for Collections ie. Varray's, Nested Tables, IOT's, LOB's, Inline, etc... and all these gave me same bad performance.
I even tried creating XMLType views based on XPath queries but the performance didn't improve much.
I guess I'm running out of options and patience as well.;)
I would appreciate any ideas/suggestions, please help.....
Thanks;
Ramakrishna ChintaAre you having similar symptoms as I am? http://discussions.apple.com/thread.jspa?threadID=2234792&tstart=0
-
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Performance Issues with crystal reports 11 - Critical
Post Author: DJ Gaba
CA Forum: Exporting
I have migrated from crystal reports version 8 to version 11.
I am experiencing some performance issues with reports when displayed in version 11
Reports that was taking 2 seconds in version 8 is now taking 4-5 seconds in versino 11
I am using vb6 to export my report file into pdf
ThanksPost Author: synapsevampire
CA Forum: Exporting
Pleae don't multiple forums on the site with the same question.
I responded to your other post.
-k
Maybe you are looking for
-
Cs6 Save file for Printer company
Question on AI master Parent file, or art brought into another AI file to send to printer? I've created a flyer (2.83x11) that I can now add 3 to an 8.5x11 sheet to get 3 flyers per sheet. When I save the master flyer (the 2.83x11) I've flattened m
-
Eudora forgets its history when Leopard is installed
When I upgraded to Leopard (OS 10.5), my e-mail client, Eudora Pro, forgot all its settings and stored e-mail. The problem was Leopard's non-support of the Classic environment. I have been using Eudora forever and, when migrating from OS 9 to OS X, s
-
Unique Render File Name For Clips?
How do I create a unique output file name for each clip in my timeline that is edited? Example: REEL_123.MOV appears 3 times on my timeline at different edit points. I need the output to be REEL_123_1.MOV REEL_123_2.MOV etc. etc. Or something simila
-
Wat is D functn module 4 Reading Infotype1008 attributes in generic service
Can anyone tell me,What is the function module for reading Infotype 1008 attributes in a generic service,my requirement is that apart form SAP PA & PD i am using my own generic service,so in my generic service code i only have to read some infotype
-
Blue screen flicker after security update
I just downloaded the recent security update this morning, and now about 5 minutes after starting up my macbook pro, the monitor flickers to blue for about 5 seconds or so, then flickers back to the desktop for less than one second, and flickers back