Performance Issue With Displaying Candidate Details for iRecruitment
We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant> the page spins for a quite whille to show the results and some times we see the 500 errors..
We are in R12.1.3 and also applied the Patch.10427777:R12.IRC.B patch.. is there any tunnign steps for the iRecruitment page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPG
You have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
thanks
Similar Messages
-
Performance issue with select query and for all entries.
hi,
i have a report to be performance tuned.
the database table has around 20 million entries and 25 fields.
so, the report fetches the distinct values of two fields using one select query.
so, the first select query fetches around 150 entries from the table for 2 fields.
then it applies some logic and eliminates some entries and makes entries around 80-90...
and then it again applies the select query on the same table using for all entries applied on the internal table with 80-90 entries...
in short,
it accesses the same database table twice.
so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
is around 80-90 entries too much for using "for all entries"?
the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
i really cant find the way out...
please help.chinmay kulkarni wrote:Chinmay,
Even though you tried to ask the question with detailed explanation, unfortunately it is still not clear.
It is perfectly fine to access the same database twice. If that is working for you, I don't think there is any need to change the logic. As Rob mentioned, 80 or 8000 records is not a problem in "for all entries" clause.
>
> so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
>
It is not clear what you tried to do here. Did you try to bring all 20 million records into an internal table? That will certainly cause the program to short dump with memory shortage.
> the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
>
That is fine. Actually, it is better (performance wise) to do much of the work in ABAP than writing a complex WHERE clause that might bog down the database. -
Performance issue with BW Reports for concurrent users
All:
I notice that one BW report that runs in few seconds will take upto 3.5 minutes when multiple users run it at the same time.
We are in BW 3.5 and we run reports for portal.
Does anyone have any suggestion about how to handle performance issue with concurrent users?
Thanks,
PranabHi,
use the OLAP-cache and/or aggregates and consider using load balancing to distribute the users to several servers.
Kind regards
/martin -
Performance issues with pipelined table functions
I am testing pipelined table functions to be able to re-use the <font face="courier">base_query</font> function. Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? The <font face="courier">processor</font> function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
TYPE resultset_typ IS REF CURSOR;
TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
TYPE table_typ IS TABLE OF row_typ;
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ;
c_default_limit CONSTANT PLS_INTEGER := 100;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ
IS
o_resultset resultset_typ;
BEGIN
OPEN o_resultset FOR
SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB;
RETURN o_resultset;
END base_query;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
IS
aa_source_data table_typ;-- := table_typ ();
BEGIN
LOOP
FETCH p_source_data
BULK COLLECT INTO aa_source_data
LIMIT p_limit_size;
EXIT WHEN aa_source_data.COUNT = 0;
/* Process the batch of (p_limit_size) records... */
FOR i IN 1 .. aa_source_data.COUNT
LOOP
PIPE ROW (aa_source_data (i));
END LOOP;
END LOOP;
CLOSE p_source_data;
RETURN;
END processor;
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT /*+ PARALLEL(t, 5) */ colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM TABLE (processor (base_query (argA, argB),100)) t
GROUP BY colC
ORDER BY colC
END with_pipeline;
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM (SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB)
GROUP BY colC
ORDER BY colC;
END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PMEarthlink wrote:
Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701 -
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Issue with displaying summary in the Page Bottom
Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
SubbaraoHI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh -
Performance issue with MSEG table
Hi all,
I need to fetch materials(MATNR) based on the service order number (AUFNR) in the selection screen,but there is performance isssue with this , how to over come this issue .
Regards ,
AmitHi,
There could be various reasons for performance issue with MSEG.
1) database statistics of tables and indexes are not upto date.
because of this wrong index is choosen during the execution.
2) Improper indexes, because there is no indexes with the fields mentioned in the WHERE clause of the statement. Because of this reason, CBO would have choosen wrong index and did a range scan.
3) Optimizer bug in oracle.
4) Size of table is very huge, archive.
Better switch on ST05 trace before you run this statements, so it will give more detailed information, where exactly time being spent during the execution.
Hope this helps
dileep -
BPC 7 performance issue with Microsoft 2003 vs Microsoft 2007
Hi All,
Needs some help with our performance issues with BPC 7 on Microsoft 2007. We have noticed a significant difference between the two versions. When running the same report on BPC 7 MS 2003 it takes roughly around 5-6 min. When running the same report in BPC 7 MS 2007 the report takes roughly 15-20 min. We've tried numerous things to figure out what can be causing this but does anyone have the same issue or shed some light as to what i can do to eliminate this problem?
Thanks,
ElmerHi,
Did you install the following component on your application server (which is a prerequisite for running Excel 2007)? This note is part of the installation guide:
In order for the software to function correctly in Excel 2007, you must install the Microsoft Office 2007 system driver Data Connectivity Components, which you can get from the Microsoft web site. The components must be installed on the Application server. We recommend that you install all of the latest Microsoft Windows hotfixes prior to installing the Administration client. For information about which hotfixes to install, see http://www.microsoft.com/downloads/details.aspx?FamilyID=7554F536-8C28-4598-9B72-EF94E038C891&DisplayLang=en.
Hope this will help.
Kind Regards,
Patrick -
Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?
Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks -
Directory Caching issue with Cisco Jabber client for Windows
Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment. -
Performance issues with Homesharing?
I have a Time Capsule as the base station for my wireless network, then 2 Airport Express setup to extend the network around the house, an iMac i7 as the main iTunes Library and couple of iPads, and a couple of Apple TVs. Everything has the latest software, but I have several performance issues with Home sharing. I've done several tests making sure nothing is taking additional bandwidth, so here are the list of issues:
1) With nothing else running, trying playing a movie via home sharing in an iPad 2 which is located on my iMac, it stops and I have to keep pressing the play button over and over again. I typically see that the iPad tries to download part of the movie first and then starts playing so that it deals with the bandwidth, but in many cases it doesn't.
2) When trying to play any iTunes content (movies, music, photos, etc) from my Apple TV I can see my computer library, but when I go in on any of the menus, it says there's no content. I have to reboot the Apple TV and then problem fixed. I's just annoying that I have to reboot.
3) When watching a Netflix movie on my iPad and with Airplay I send the sound to some speakers via Airplay through an Airport Express. At time I lose the connection to the speakers.
I've complained about Wifi's instability, but here I tried to keep everything with Apples products to avoid any compatibility issues and stay within N wireless technology, which I understood it was much more stable.
Has anyone some suggestions?Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim -
Performance issues with the Vouchers index build in SES
Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES> -
Performance Issues with large XML (1-1.5MB) files
Hi,
I'm using an XML Schema based Object relational storage for my XML documents which are typically 1-1.5 MB in size and having serious performance issues with XPath Query.
When I do XPath query against an element of SQLType varchar2, I get a good performance. But when I do a similar XPath query against an element of SQLType Collection (Varray of varchar2), I get a very ordinary performance.
I have also created indexes on extract() and analyzed my XMLType table and indexes, but I have no performance gain. Also, I have tried all sorts of storage options available for Collections ie. Varray's, Nested Tables, IOT's, LOB's, Inline, etc... and all these gave me same bad performance.
I even tried creating XMLType views based on XPath queries but the performance didn't improve much.
I guess I'm running out of options and patience as well.;)
I would appreciate any ideas/suggestions, please help.....
Thanks;
Ramakrishna ChintaAre you having similar symptoms as I am? http://discussions.apple.com/thread.jspa?threadID=2234792&tstart=0
-
Performance issues with Bapi BAPI_MATERIAL_AVAILABILITY...
Hello,
I have a Z program to check ATP which is working with Bapi BAPI_MATERIAL_AVAILABILITY....
As I am in the retail system we have performance issues with this bapi due the huge amount of articles in the system we need to calculate the ATP.
any way to improve the performance?
Thanks and best regards
LThe BAPI appears to execute for only one plant/material, etc., at a time, so I would have to concentrate on making data retrieval and post-bapi processing as efficient as possible. In your trace output, how much of your overall time is consumed by the BAPI? How much by the other code? You might find improvements there...
-
Performance Issues with crystal reports 11 - Critical
Post Author: DJ Gaba
CA Forum: Exporting
I have migrated from crystal reports version 8 to version 11.
I am experiencing some performance issues with reports when displayed in version 11
Reports that was taking 2 seconds in version 8 is now taking 4-5 seconds in versino 11
I am using vb6 to export my report file into pdf
ThanksPost Author: synapsevampire
CA Forum: Exporting
Pleae don't multiple forums on the site with the same question.
I responded to your other post.
-k
Maybe you are looking for
-
I proof websites for a living and workflow is everything. On my 26" main monitor I have FF running the job tracking web site. In this site, there are links to the sites I need to proof. I would like to be able to right click on a URL and select 'open
-
Does it make sense for kernel_task process to use hundreds of MB of RAM?
I'm not terribly knowledgeable about the UNIX heart of the Mac OS, but I have been troubled by this quirk on my machine for a while now. I can't figure why the kernel_task process on my machine seems to take triple the "Real Memory" as it does on eve
-
Hi friends, I need to display two pushbuttons and two parameters on the selection screen, when I click one push button I have to display one parameter and hide the another parameter,same with the second pushbutton.Please give me some sample
-
Dear Reader, i have bought 3230 recently ,andto my wonder i have noticed that the newer version of software (o/s) installed does not support call duration (not taking about call summary)seen during the call made. can any one help me with this functio
-
Ios 8.1.1 2g toggle
uupdated IOS 8.1.1 but still no 2g toggle in my Iphone 5s in india