Performance issues with data warehouse loads
We have performance issues with our data warehouse load ETL process. I have run
analyze and dbms_stats and checked database environment. What other things can I do to optimize performance? I cannot use statspack since we are running Oracle 8i. Thanks
Scott
Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim
Similar Messages
-
Performance issues with Planning data load & Agg in 11.1.2.3.500
We recently upgraded from 11.1.1.3 to 11.1.2.3. Post upgrade we face performance issues with one of our Planning job (eg: Job E). It takes 3x the time to complete in our new environment (11.1.2.3) when compared to the old one (11.1.1.3). This job loads then actual data and does the aggregation. The pattern which we noticed is , if we run a restructure on the application and execute this job immediately it gets completed as the same time as 11.1.1.3. However, in current production (11.1.1.3) the job runs in the following sequence Job A->Job B-> Job C->Job D->Job E and it completes on time, but if we do the same test in 11.1.2.3 in the above sequence it take 3x the time . We dont have a window to restructure the application to before running Job E every time in Prod. Specs of the new Env is much higher than the old one.
We have Essbase clustering (MS active/passive) in the new environment and the files are stored in the SAN drive. Could this be because of this? has any one faced performance issues in the clustered environment?Do you have exactly same Essbase config settings and calculations performing AGG ? . Remember something very small like UPDATECALC ON/OFF can make a BIG difference in timing..
-
Performance issues with Homesharing?
I have a Time Capsule as the base station for my wireless network, then 2 Airport Express setup to extend the network around the house, an iMac i7 as the main iTunes Library and couple of iPads, and a couple of Apple TVs. Everything has the latest software, but I have several performance issues with Home sharing. I've done several tests making sure nothing is taking additional bandwidth, so here are the list of issues:
1) With nothing else running, trying playing a movie via home sharing in an iPad 2 which is located on my iMac, it stops and I have to keep pressing the play button over and over again. I typically see that the iPad tries to download part of the movie first and then starts playing so that it deals with the bandwidth, but in many cases it doesn't.
2) When trying to play any iTunes content (movies, music, photos, etc) from my Apple TV I can see my computer library, but when I go in on any of the menus, it says there's no content. I have to reboot the Apple TV and then problem fixed. I's just annoying that I have to reboot.
3) When watching a Netflix movie on my iPad and with Airplay I send the sound to some speakers via Airplay through an Airport Express. At time I lose the connection to the speakers.
I've complained about Wifi's instability, but here I tried to keep everything with Apples products to avoid any compatibility issues and stay within N wireless technology, which I understood it was much more stable.
Has anyone some suggestions?Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim -
Performance issues with 0CO_OM_WBS_1
We use BW3.5 & R/3 4.7 and encounter huge performance issues with 0CO_OM_WBS_1? Always having to do a full load involving approx 15M records even though there are on the average 100k new records since previous load. This takes a longtime.
Is there a way to delta-enable this datasource?Hi,
This DS is not delta enabled and you can only do a full load. For a delta enabled one, you need to use 0CO_OM_WBS_6. This works as other Financials extractors, as it has a safety delta (configurable, default 2 hours, in table BWOM_SETTINGS).
What you should do is maybe, use the WBS_6 as a delta and only extract full loads for WBS_1 for shorter durations.
As you must have an ODS for WBS_1 at the first stage, I would suggest do a full load only for posting periods that are open. This will reduce the data load.
You may also look at creating your own generic data source with delta; if you are clear on the tables and logic used.
cheers... -
Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade
We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5. I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed. Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile. This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse. We see there is a high use of java script, and the processors canu2019t handle this. When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues. When we login to tcode LM00, with the RF scanners, the system is very slow. It might take 30 seconds to confirm one item on a WM Transfer Order.
1.) Can we revert back to Web SAP Console, after we have upgraded to EHP5?
2.) What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies. One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.Tom,
I am sorry I did not see this earlier.
I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
Let me know if I can answer more questions related to this topic.
Cheers,
Shari -
Performance issues with query input variable selection in ODS
Hi everyone
We've upgraded from BW 3.0B to NW04s BI using SP12.
There is a problem encountered with input variable selection. This happens regardless of using BEx (new or old 3.x) or using RSRT. When using the F4 search help (or "Select from list" in BEx context) to list possible values, this takes forever for large ODS (containing millions of records).
Using ST01 and SM50 to trace the code in the same query, we see a difference here:
<u>NW04s BI SQL command</u>
SELECT
"P0000"."COMP_CODE" AS "0000000032" ,"T0000"."TXTMD" AS "0000000032_TXTMD"
FROM
( "/BI0/PCOMP_CODE" "P0000" ) LEFT OUTER JOIN "/BI0/TCOMP_CODE" "T0000" ON "P0000"."COMP_CODE" = "T0000
"."COMP_CODE"
WHERE
"P0000"."OBJVERS" = 'A' AND "P0000"."COMP_CODE" IN ( SELECT "O"."COMP_CODE" AS "KEY" FROM
"/BI0/APY_PP_C100" "O" )
ORDER BY
"P0000"."COMP_CODE" ASC#
<u>BW 3.0B SQL command:</u>
SELECT ROWNUM < 500 ....
In 3.0B, rownum is limited to 500 and this results in a speedy, though limited query. In the new NW04s BI, this renders the selection screen unusable as ABAP dumps for timing out will occur first due to the large data volume searched using sequential read.
It will not be feasible to create indexes for every single query selection parameter (issues with oerformance when loading, space required etc.). Is there a reason why SAP seems have fallen back on a less effective code for this?
I have tried to change the number of selected rows to <500 in BEx settings but one must reach a responsive screen in order to get to that setting and it is not always possible or saved for the next run.
Anyone with similar experience or can provide help on this?here is a reason why the F4 help on ODS was faster in BW 3.x.
In BW 3.x the ODS did not support the read mode "Only values in
InfoProvider". So If I compare the different SQL statements I propose
to change the F4 mode in the InfoProvider specific properties to
"About master data". This is the fastest F4 mode.
As an alternative you can define indexes on your ODS to speed up F4.
So would need a non-unique index on InfoObject 0COMP_CODE in your ODS
Check below for insights
https://forums.sdn.sap.com/click.jspa?searchID=6224682&messageID=2841493
Hope it Helps
Chetan
@CP.. -
Performance issues with pipelined table functions
I am testing pipelined table functions to be able to re-use the <font face="courier">base_query</font> function. Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? The <font face="courier">processor</font> function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
TYPE resultset_typ IS REF CURSOR;
TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
TYPE table_typ IS TABLE OF row_typ;
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ;
c_default_limit CONSTANT PLS_INTEGER := 100;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ
IS
o_resultset resultset_typ;
BEGIN
OPEN o_resultset FOR
SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB;
RETURN o_resultset;
END base_query;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
IS
aa_source_data table_typ;-- := table_typ ();
BEGIN
LOOP
FETCH p_source_data
BULK COLLECT INTO aa_source_data
LIMIT p_limit_size;
EXIT WHEN aa_source_data.COUNT = 0;
/* Process the batch of (p_limit_size) records... */
FOR i IN 1 .. aa_source_data.COUNT
LOOP
PIPE ROW (aa_source_data (i));
END LOOP;
END LOOP;
CLOSE p_source_data;
RETURN;
END processor;
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT /*+ PARALLEL(t, 5) */ colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM TABLE (processor (base_query (argA, argB),100)) t
GROUP BY colC
ORDER BY colC
END with_pipeline;
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM (SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB)
GROUP BY colC
ORDER BY colC;
END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PMEarthlink wrote:
Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701 -
Performance issues with the Vouchers index build in SES
Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES> -
Performance issues with Bapi BAPI_MATERIAL_AVAILABILITY...
Hello,
I have a Z program to check ATP which is working with Bapi BAPI_MATERIAL_AVAILABILITY....
As I am in the retail system we have performance issues with this bapi due the huge amount of articles in the system we need to calculate the ATP.
any way to improve the performance?
Thanks and best regards
LThe BAPI appears to execute for only one plant/material, etc., at a time, so I would have to concentrate on making data retrieval and post-bapi processing as efficient as possible. In your trace output, how much of your overall time is consumed by the BAPI? How much by the other code? You might find improvements there...
-
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Performance issues with version enable partitioned tables?
Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
Object Name Rows Bytes Cost Object Node In/Out PStart PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE 1 249
UPDATE SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI 1 266 249
PARTITION RANGE ALL 1 9
TABLE ACCESS FULL SIG.SIG_QUA_IMG_LT 1 259 2 1 9
VIEW SYS.VW_NSO_1 1 7 247
NESTED LOOPS 1 739 247
NESTED LOOPS 1 677 247
NESTED LOOPS 1 412 246
NESTED LOOPS 1 114 244
INDEX RANGE SCAN WMSYS.MODIFIED_TABLES_PK 1 62 2
INDEX RANGE SCAN SIG.QIM_PK 1 52 243
TABLE ACCESS BY GLOBAL INDEX ROWID SIG.SIG_QUA_IMG_LT 1 298 2 ROWID ROW L
INDEX RANGE SCAN SIG.SIG_QUA_IMG_PKI$ 1 1
INDEX RANGE SCAN WMSYS.WM$NEXTVER_TABLE_NV_INDX 1 265 1
INDEX UNIQUE SCAN WMSYS.MODIFIED_TABLES_PK 1 62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben -
Performance issues with SAP BPC 7.0/7.5 (SP06, 07, 08) NW
Hi Experts
There are some performance issues with SAP BPC 7.5/7.0 NW, users are saying they are not getting data or there are some issues while getting data from R/3 system or ECC 6.0. Then what things do I need to consider to check, such as what DataSources or Cubes I need to check? So, how to solve this issue?
What things I need to consider for SAP NW BI 7.0 u2013 SAP BPC 7.5 NW (SP06, 07, 08) Implementation?
Your help is greatly appreciated.
Regards,
QadeerHi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv -
Performance Issue with BSIS(open accounting items)
Hey All,
I am having serious performance issue with a accrual report which gets all open GL items, and need some tips for optimization.
The main issue is that I am accesing large tables like BSIS, BSEG, BSAS etc without proper indexes and that I am dealing with huge amounts of data.
The select itself take a long time and after that as I have so much data overall execution is slow too.
The select which concerns me the most is:
SELECT zuonr hkont gjahr belnr buzei budat blart wrbtr shkzg xblnr waers bukrs
INTO TABLE i_bsis
FROM bsis
WHERE bukrs = '1000'
AND hkont in r_hkont
AND budat <= p_lcdate
AND augdt = 0
AND augbl = space
AND gsber = c_ZRL1
AND gjahr BETWEEN l_gjahr2 AND l_gjahr
AND ( blart = c_re "Invoice
OR blart = c_we "Goods receipt
OR blart = c_zc "Invoice Cancels
OR blart = c_kp ). "Accounting offset
I have seen other related threads, but was not that helpful.
We already have a secondary index on bukrs hkont and budat, and i have checked in ST05 that it does use it. But inspite that it takes more than 15 hrs to complete(maybe because of huge data).
Any Input is highly appreciated.
ThanksThank you Thomas for your inputs:
You said that R_HKONT contains several ranges of account numbers. If these ranges cover a significant
portion of the overall existing account numbers, then there is no really quick access possible via the
BSIS primary key.
Unfortunately R_HKONT contains all account numbers.
As Rob said, your index on HKONT and BUDAT does not help much, since you are selecting "<=" on
BUDAT. No chance of narrowing down that range?
Will look into this.
What about GSBER? Does the value in c_ZRL1 provide a rather small subset of the overall values? Then
an index on BUKRS and GSBER might be helpful.
ZRL1 does provide a decent selection . But I dont know if one more index is a good idea on overall
system performance.
I assume that the four document types are not very selective, so it probably does not pay off to
investigate selecting on BKPF (there is an index involving BLART) and joining BSIS for the additional
information. You still might want to look into it though.
I did try to investigate this option too. Based on other threads related to BSIS and Robs Suggestion in
those threads I tried this:
SELECT bukrs belnr gjahr blart budat
FROM bkpf INTO TABLE bkpf_l
WHERE bukrs = c_pepsico
AND bstat IN (' ', 'A', 'B', 'D', 'M', 'S', 'V', 'W', 'Z')
AND blart IN ('RE', 'WE', 'ZC', 'KP')
AND gjahr BETWEEN l_gjahr2 AND l_gjahr
AND budat <= p_lcdate.
SELECT zuonr hkont gjahr belnr buzei budat blart wrbtr shkzg xblnr waers bukrs
FROM bsis INTO TABLE i_bsis FOR ALL ENTRIES IN bkpf_l
WHERE bukrs = bkpf_l-bukrs
AND hkont IN r_hkont
AND budat = bkpf_l-budat
AND augdt = 0
AND augbl = space
AND gjahr = bkpf_l-gjahr
AND belnr = bkpf_l-belnr
AND blart = bkpf_l-blart
AND gsber = c_zrl1.
The improves the select on BSIS a lot, but the first select on BKPF kills it. Not sure if this would help
improve performance.
Also I was wondering whether it helps on refreshing the tabe statistics through DB20. The last refresh
was done 7 months back. How frequently should we do this? Will it help? -
Performance issue with Jdeveloper
Hi Guys,
I am experiencing strange performance issue with Jdeveloper 10.1.3.3.0.4157. There are many other threads regarding the performance issue in this forum, but the problem I have is a little bit different.
I have two computers: one is Athlon 3200+ with Vista and another one is P4 dual core 6400 with XP (service pack 2). Both of them have 2GB memory.
I am running the same simple project on both computer, but only the one with Vista has the problem. The problem is very similar to the problem mentioned in the thread:
Re: IDE has become extremely slow?
But it's much worse. It only happens only on JSF pages. Basically, any operations on the JSF pages are very slow. Loading the page, changing the attributes of a button in source editor, or even clicking the items in the design view take forever to run.
The first weird thing is that it may use 100% CPU, but it never recover, which means the 100% CPU usage never stops or when it stops, the Jdeveloper stops responding.
The second weird thing is that the project is not big. Actually, it's very small. The problem started to happen since last week. There are not big changes during the period. The only thing I can say is that we created two more JSF pages.
The third weird thing is that the same project never happened on the P4+XP box. When I open the project on the P4+XP box, it’s always fast and no CPU spike.
Any advises are welcome!
Thanks,
StevenHi Guys,
I re-made a simple test project for this problem and now I now always reproduce the problem in JDeveloper on both system (XP & Vista). Everytime I open this jspx file in the source editor and try to scroll up/down the source file, or manually delete an attribute, JDeveloepr will hang and the CPU usage is 0%.
Here is the content of the test file:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
<afh:html binding="#{backing_streettypedetail.html1}" id="html1">
<afh:head title="streettypedetail"
binding="#{backing_streettypedetail.head1}" id="head1">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
</afh:head>
<afh:body binding="#{backing_streettypedetail.body1}" id="body1">
<af:messages binding="#{backing_streettypedetail.messages1}"
id="messages1"/>
<h:form binding="#{backing_streettypedetail.form1}" id="form1">
<af:panelForm binding="#{backing_streettypedetail.panelForm1}"
id="panelForm1">
<af:inputText value="#{bindings.streetTypeID.inputValue}"
label="#{bindings.streetTypeID.label}"
required="#{bindings.streetTypeID.mandatory}"
columns="#{bindings.streetTypeID.displayWidth}"
binding="#{backing_streettypedetail.inputText1}"
id="inputText1">
<af:validator binding="#{bindings.streetTypeID.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.description.inputValue}"
label="#{bindings.description.label}"
required="#{bindings.description.mandatory}"
columns="#{bindings.description.displayWidth}"
binding="#{backing_streettypedetail.inputText2}"
id="inputText2">
<af:validator binding="#{bindings.description.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.abbr.inputValue}"
label="#{bindings.abbr.label}"
required="#{bindings.abbr.mandatory}"
columns="#{bindings.abbr.displayWidth}"
binding="#{backing_streettypedetail.inputText3}"
id="inputText3">
<af:validator binding="#{bindings.abbr.validator}"/>
</af:inputText>
<f:facet name="footer">
<h:panelGroup binding="#{backing_streettypedetail.panelGroup1}"
id="panelGroup1">
<af:commandButton text="Save"
binding="#{backing_streettypedetail.saveButton}"
id="saveButton"
actionListener="#{bindings.mergeEntity.execute}"
action="#{userState.retrieveReturnNavigationRule}"
disabled="#{!bindings.mergeEntity.enabled}"
partialSubmit="false">
<af:setActionListener from="#{true}"
to="#{userState.refresh}"/>
</af:commandButton>
<af:commandButton text="Cancel"
binding="#{backing_streettypedetail.cancelButton}"
action="#{userState.retrieveReturnNavigationRule}"
id="cancelButton">
<af:setActionListener from="#{false}"
to="#{userState.refresh}"/>
</af:commandButton>
</h:panelGroup>
</f:facet>
</af:panelForm>
</h:form>
</afh:body>
</afh:html>
</f:view>
<!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_streettypedetail-->
</jsp:root>
Can anybody take a look at the file and let me know what's wrong with it?
Thanks in advance.
Steven -
Performance issue with MSEG table
Hi all,
I need to fetch materials(MATNR) based on the service order number (AUFNR) in the selection screen,but there is performance isssue with this , how to over come this issue .
Regards ,
AmitHi,
There could be various reasons for performance issue with MSEG.
1) database statistics of tables and indexes are not upto date.
because of this wrong index is choosen during the execution.
2) Improper indexes, because there is no indexes with the fields mentioned in the WHERE clause of the statement. Because of this reason, CBO would have choosen wrong index and did a range scan.
3) Optimizer bug in oracle.
4) Size of table is very huge, archive.
Better switch on ST05 trace before you run this statements, so it will give more detailed information, where exactly time being spent during the execution.
Hope this helps
dileep
Maybe you are looking for
-
Animated .GIF in Fireworks
Hello everyone, I'm trying to train myself with Fireworks so please bare with me. I'm attempting to make an animated .gif and my question is: Is there a way to insert each image to automatically fit the canvas (100 pixels X 100 pixels)? Currently I
-
Attempted to install windows 7 for dual boot but OSX installation now missing???
I've tried to install Wndows 7 on my macbook air for dual boot but got the kernal error on boot. I loaded from the CD again and it sucessfully installed win 7 but when I start the macbook air up it only appears to have windows installed? How can I ge
-
Why was mobile e-mail retired?
I have no idea what type of response to expect here. It is pretty clear that Verizon has no regard for my needs as a 13+ year loyal customer. My loyalty has remained because Verizon provides the services that I want and need at a fair price. Howev
-
IPod Shuffle 2nd generation?
Can you use a new usb iPod shuffle cable with an older 2nd generation shuffle? The kind that used a docking station.
-
10.1.2.0.2 Developer Suite released!
Download from here: http://www.oracle.com/technology/software/products/ids/index.html http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html