Performance issues with Homesharing?
I have a Time Capsule as the base station for my wireless network, then 2 Airport Express setup to extend the network around the house, an iMac i7 as the main iTunes Library and couple of iPads, and a couple of Apple TVs. Everything has the latest software, but I have several performance issues with Home sharing. I've done several tests making sure nothing is taking additional bandwidth, so here are the list of issues:
1) With nothing else running, trying playing a movie via home sharing in an iPad 2 which is located on my iMac, it stops and I have to keep pressing the play button over and over again. I typically see that the iPad tries to download part of the movie first and then starts playing so that it deals with the bandwidth, but in many cases it doesn't.
2) When trying to play any iTunes content (movies, music, photos, etc) from my Apple TV I can see my computer library, but when I go in on any of the menus, it says there's no content. I have to reboot the Apple TV and then problem fixed. I's just annoying that I have to reboot.
3) When watching a Netflix movie on my iPad and with Airplay I send the sound to some speakers via Airplay through an Airport Express. At time I lose the connection to the speakers.
I've complained about Wifi's instability, but here I tried to keep everything with Apples products to avoid any compatibility issues and stay within N wireless technology, which I understood it was much more stable.
Has anyone some suggestions?
Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim
Similar Messages
-
Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?
Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks -
Performance issues with pipelined table functions
I am testing pipelined table functions to be able to re-use the <font face="courier">base_query</font> function. Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? The <font face="courier">processor</font> function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
TYPE resultset_typ IS REF CURSOR;
TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
TYPE table_typ IS TABLE OF row_typ;
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ;
c_default_limit CONSTANT PLS_INTEGER := 100;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ
IS
o_resultset resultset_typ;
BEGIN
OPEN o_resultset FOR
SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB;
RETURN o_resultset;
END base_query;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
IS
aa_source_data table_typ;-- := table_typ ();
BEGIN
LOOP
FETCH p_source_data
BULK COLLECT INTO aa_source_data
LIMIT p_limit_size;
EXIT WHEN aa_source_data.COUNT = 0;
/* Process the batch of (p_limit_size) records... */
FOR i IN 1 .. aa_source_data.COUNT
LOOP
PIPE ROW (aa_source_data (i));
END LOOP;
END LOOP;
CLOSE p_source_data;
RETURN;
END processor;
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT /*+ PARALLEL(t, 5) */ colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM TABLE (processor (base_query (argA, argB),100)) t
GROUP BY colC
ORDER BY colC
END with_pipeline;
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM (SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB)
GROUP BY colC
ORDER BY colC;
END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PMEarthlink wrote:
Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701 -
Performance issues with the Vouchers index build in SES
Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES> -
Performance Issues with large XML (1-1.5MB) files
Hi,
I'm using an XML Schema based Object relational storage for my XML documents which are typically 1-1.5 MB in size and having serious performance issues with XPath Query.
When I do XPath query against an element of SQLType varchar2, I get a good performance. But when I do a similar XPath query against an element of SQLType Collection (Varray of varchar2), I get a very ordinary performance.
I have also created indexes on extract() and analyzed my XMLType table and indexes, but I have no performance gain. Also, I have tried all sorts of storage options available for Collections ie. Varray's, Nested Tables, IOT's, LOB's, Inline, etc... and all these gave me same bad performance.
I even tried creating XMLType views based on XPath queries but the performance didn't improve much.
I guess I'm running out of options and patience as well.;)
I would appreciate any ideas/suggestions, please help.....
Thanks;
Ramakrishna ChintaAre you having similar symptoms as I am? http://discussions.apple.com/thread.jspa?threadID=2234792&tstart=0
-
Performance issues with Bapi BAPI_MATERIAL_AVAILABILITY...
Hello,
I have a Z program to check ATP which is working with Bapi BAPI_MATERIAL_AVAILABILITY....
As I am in the retail system we have performance issues with this bapi due the huge amount of articles in the system we need to calculate the ATP.
any way to improve the performance?
Thanks and best regards
LThe BAPI appears to execute for only one plant/material, etc., at a time, so I would have to concentrate on making data retrieval and post-bapi processing as efficient as possible. In your trace output, how much of your overall time is consumed by the BAPI? How much by the other code? You might find improvements there...
-
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Performance Issues with crystal reports 11 - Critical
Post Author: DJ Gaba
CA Forum: Exporting
I have migrated from crystal reports version 8 to version 11.
I am experiencing some performance issues with reports when displayed in version 11
Reports that was taking 2 seconds in version 8 is now taking 4-5 seconds in versino 11
I am using vb6 to export my report file into pdf
ThanksPost Author: synapsevampire
CA Forum: Exporting
Pleae don't multiple forums on the site with the same question.
I responded to your other post.
-k -
Performance issues with Planning data load & Agg in 11.1.2.3.500
We recently upgraded from 11.1.1.3 to 11.1.2.3. Post upgrade we face performance issues with one of our Planning job (eg: Job E). It takes 3x the time to complete in our new environment (11.1.2.3) when compared to the old one (11.1.1.3). This job loads then actual data and does the aggregation. The pattern which we noticed is , if we run a restructure on the application and execute this job immediately it gets completed as the same time as 11.1.1.3. However, in current production (11.1.1.3) the job runs in the following sequence Job A->Job B-> Job C->Job D->Job E and it completes on time, but if we do the same test in 11.1.2.3 in the above sequence it take 3x the time . We dont have a window to restructure the application to before running Job E every time in Prod. Specs of the new Env is much higher than the old one.
We have Essbase clustering (MS active/passive) in the new environment and the files are stored in the SAN drive. Could this be because of this? has any one faced performance issues in the clustered environment?Do you have exactly same Essbase config settings and calculations performing AGG ? . Remember something very small like UPDATECALC ON/OFF can make a BIG difference in timing..
-
Performance Issues with Folio format in Ipad.
Hello everyone! My FIRST post here!!!
I work with educational games and I'm facing performance issues with games that I've made in HTML5 to play in Ipad. I tried to import them to the format folio in DPS (Adobe Digital Publishing Suite). However when I import the HTML game into Indesign and try to preview it in Adobe content viewer, the game doesn't open or works without perform properly (there is a lag that doesn't let you play the game with a little of fun).
The games that I've created have a memory use max of 35mb and weighs 30mb max.
Does anyone know what's happen and what I can do to fix that performance issue?
Thanks a lot!Moved to DPS
-
Performance issues with 0CO_OM_WBS_1
We use BW3.5 & R/3 4.7 and encounter huge performance issues with 0CO_OM_WBS_1? Always having to do a full load involving approx 15M records even though there are on the average 100k new records since previous load. This takes a longtime.
Is there a way to delta-enable this datasource?Hi,
This DS is not delta enabled and you can only do a full load. For a delta enabled one, you need to use 0CO_OM_WBS_6. This works as other Financials extractors, as it has a safety delta (configurable, default 2 hours, in table BWOM_SETTINGS).
What you should do is maybe, use the WBS_6 as a delta and only extract full loads for WBS_1 for shorter durations.
As you must have an ODS for WBS_1 at the first stage, I would suggest do a full load only for posting periods that are open. This will reduce the data load.
You may also look at creating your own generic data source with delta; if you are clear on the tables and logic used.
cheers... -
Performance issues with FDK in large XML documents
In my current project with FrameMaker 8 I'm experiencing severe performance issues with some FDK API calls.
The documents are about 3-8 MBytes in size. Fortmatted they cover 150-250 pages.
When importing such an XML document I do some extensive "post-processing" using FDK. This processing happens in Sr_EventHandler() during the SR_EVT_END_READER event. I noticed that some FDK functions calls which modify the document's structure, like F_ApiSetAttribute() or F_ApiNewElementInHierarchy(), take several seconds, for the larger documents even minutes, to complete one single function call. I tried to move some of these calls to earlier events, mostly to SR_EVT_END_ELEM. There the calls work without a delay. Unfortunately I can't rewrite the FDK client to move all the calls that are lagging to earlier events.
Does anybody have a clue why such delays happen, and possibly can make a suggestion, how to solve this issue? Thank you in advance.
PS: I already thought of splitting such a document in smaller pieces by using the FrameMaker book function. But I don't think, the structure of the documents will permit such an automatic split, and it definitely isn't an option to change the document structure (the project is about migrating documents from Interleaf to XML with the constraint of keeping the document layout identical).FP_ApplyFormatRules sounds really good--I'll give it a try on Monday. Wonder how I could miss it, as I already tried FP_Reformatting and FP_Displaying at no avail?! By the way, what is actually meant with FP_Reformatting (when I used it I assumed it would do exactly what FP_ApplyFormatRules sounds to do), or is that one another of Lynne's well-kept secrets?
Thank's for all the helpful suggestions, guys. On Friday I already had my first improvements in a test version of my client: I did some (not all necessary) structural changes using XSLT pre-processing, and processing went down from 8 hours(!) to 1 hour--Yeappie! I was also playing with the idea of writing a wrapper to F_ApiNewElementInHierarchy() which actually pastes an appropriate element created in a small flow on the reference pages at the intended insertion location. But now, with FP_ApplyFormatRules on the horizon, I'm quite confident to get even the complicated stuff under control, which cannot be handled by the XSLT pre-processing, as it is based on the actual formatting of the document at run-time and cannot be anticipated in pre-processing.
--Franz -
Hi all,
I'm facing some performance issues with Spry. I'm using it
for handling a menubar acting as a rollover menu : its color
changes under mouse cursor, and a submenu does appear at the same
time.
I have no problem when working with Firefox, but in IE6, it
renders too slowly
Is there something I've missed in the configuration or code
(or is there some tips for this kind of problem) ?
For information, I used UL and LI html tags, and I've
configured Spry to render these as a menubar (with multiple levels)
Thanks for your responseSorry, there are no public access to this application
:-( -
Performance issues with Oracle EE 9.2.0.4 and RedHat 2.1
Hello,
I am having some serious performance issues with Oracle Enterprise Edition 9.2.0.4 and RedHat Linux 2.1. The processor goes berserk at 100% for long (some 5 min.) periods of time, and all the ram memory gets used.
Some environment characteristics:
Machine: Intel Pentium IV 2.0GHz with 1GB of RAM.
OS: RedHat Linux 2.1 Enterprise.
Oracle: Oracle Enterprise Edition 9.2.0.4
Application: We have a small web-application with 10 users (for now) and very basic queries (all in stored procedures). Also we use the latest version of ODP.NET with default connection settings (some low pooling, etc).
Does anyone know what could be going on?
Is anybody else having this similar behavior?
We change from SQL-Server so we are not the world expert on the matter. But we want a reliable system nonetheless.
Please help us out, gives some tips, tricks, or guides
Thanks to all,
FrankThank you very much and sorry I couldnt write sooner. It seems that the administrator doesnt see the kswap going on so much, so I dont really know what is going on.
We are looking at some queries and some indexing but this is nuts, if I had some poor queries, which we dont really, the server would show pick right?
But he goes crazy and has two oracle processes taking all the resources. There seems to be little swapping going on.
Son now what? They are all ready talking about MS-SQL please help me out here, this is crazy!!!
We have, may be the most powerful combinations here. What is oracle doing?
We even kill the Working Process of the IIS and have no one do anything with the database and still dose two processes going on.
Can some one help me?
Thanks,
Frank -
Performance issues with version enable partitioned tables?
Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
Object Name Rows Bytes Cost Object Node In/Out PStart PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE 1 249
UPDATE SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI 1 266 249
PARTITION RANGE ALL 1 9
TABLE ACCESS FULL SIG.SIG_QUA_IMG_LT 1 259 2 1 9
VIEW SYS.VW_NSO_1 1 7 247
NESTED LOOPS 1 739 247
NESTED LOOPS 1 677 247
NESTED LOOPS 1 412 246
NESTED LOOPS 1 114 244
INDEX RANGE SCAN WMSYS.MODIFIED_TABLES_PK 1 62 2
INDEX RANGE SCAN SIG.QIM_PK 1 52 243
TABLE ACCESS BY GLOBAL INDEX ROWID SIG.SIG_QUA_IMG_LT 1 298 2 ROWID ROW L
INDEX RANGE SCAN SIG.SIG_QUA_IMG_PKI$ 1 1
INDEX RANGE SCAN WMSYS.WM$NEXTVER_TABLE_NV_INDX 1 265 1
INDEX UNIQUE SCAN WMSYS.MODIFIED_TABLES_PK 1 62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben
Maybe you are looking for
-
Missing images in distributon email
I have created my form and distributed it through the Distribute Form. I sent the form to a couple of people in my department to test the form. In the email they receive, there appears to be missing images above and below the text I entered in the di
-
Pls help me in select query......
My problem is... I have to use a select query in such a manner that i can compare the last 8 characters or ignore the first one...
-
Footnotes in two columns?
I have a document with about 10 very short footnotes at the bottom of each page. It would be a better use of page space to have my footnotes in two (or more) columns. I haven't had success trying this. Can it be done?
-
Multiple imports from same dump file
Hi, I have to import multiple related schemas - to avoid having to create multiple dump files can I just export them into one dump file (owner= a,b,c etc) and then run simultaneous imports like : export <dba_user> owner=a,b,c file=all.dmp --in newdb
-
CTX_DDL.SYNC_INDEX 'memory' argument
According to the Oracle Text manual, http://download.oracle.com/docs/cd/B28359_01/text.111/b28304/cddlpkg.htm#i998469 The memory parameter specifies the amount of memory Oracle Text uses for the synchronization operation before flushing the index to