Performance Issues with Location Services
I am having performance lag issues with most apps with location services turned on. This is a new issue that has crept up after update to iOS 4.2.1. Apps get slow and upon exiting the location service is still active as indicated by arrow icon in top right of screen. Any recommendation short of killing all location services? Note this even occurs in apple apps such as photos.
Have you tried basics from the manual?
restart.
reset.
restore.
Similar Messages
-
Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?
The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594 -
Performance issues with Homesharing?
I have a Time Capsule as the base station for my wireless network, then 2 Airport Express setup to extend the network around the house, an iMac i7 as the main iTunes Library and couple of iPads, and a couple of Apple TVs. Everything has the latest software, but I have several performance issues with Home sharing. I've done several tests making sure nothing is taking additional bandwidth, so here are the list of issues:
1) With nothing else running, trying playing a movie via home sharing in an iPad 2 which is located on my iMac, it stops and I have to keep pressing the play button over and over again. I typically see that the iPad tries to download part of the movie first and then starts playing so that it deals with the bandwidth, but in many cases it doesn't.
2) When trying to play any iTunes content (movies, music, photos, etc) from my Apple TV I can see my computer library, but when I go in on any of the menus, it says there's no content. I have to reboot the Apple TV and then problem fixed. I's just annoying that I have to reboot.
3) When watching a Netflix movie on my iPad and with Airplay I send the sound to some speakers via Airplay through an Airport Express. At time I lose the connection to the speakers.
I've complained about Wifi's instability, but here I tried to keep everything with Apples products to avoid any compatibility issues and stay within N wireless technology, which I understood it was much more stable.
Has anyone some suggestions?Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim -
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Performance issues with FDK in large XML documents
In my current project with FrameMaker 8 I'm experiencing severe performance issues with some FDK API calls.
The documents are about 3-8 MBytes in size. Fortmatted they cover 150-250 pages.
When importing such an XML document I do some extensive "post-processing" using FDK. This processing happens in Sr_EventHandler() during the SR_EVT_END_READER event. I noticed that some FDK functions calls which modify the document's structure, like F_ApiSetAttribute() or F_ApiNewElementInHierarchy(), take several seconds, for the larger documents even minutes, to complete one single function call. I tried to move some of these calls to earlier events, mostly to SR_EVT_END_ELEM. There the calls work without a delay. Unfortunately I can't rewrite the FDK client to move all the calls that are lagging to earlier events.
Does anybody have a clue why such delays happen, and possibly can make a suggestion, how to solve this issue? Thank you in advance.
PS: I already thought of splitting such a document in smaller pieces by using the FrameMaker book function. But I don't think, the structure of the documents will permit such an automatic split, and it definitely isn't an option to change the document structure (the project is about migrating documents from Interleaf to XML with the constraint of keeping the document layout identical).FP_ApplyFormatRules sounds really good--I'll give it a try on Monday. Wonder how I could miss it, as I already tried FP_Reformatting and FP_Displaying at no avail?! By the way, what is actually meant with FP_Reformatting (when I used it I assumed it would do exactly what FP_ApplyFormatRules sounds to do), or is that one another of Lynne's well-kept secrets?
Thank's for all the helpful suggestions, guys. On Friday I already had my first improvements in a test version of my client: I did some (not all necessary) structural changes using XSLT pre-processing, and processing went down from 8 hours(!) to 1 hour--Yeappie! I was also playing with the idea of writing a wrapper to F_ApiNewElementInHierarchy() which actually pastes an appropriate element created in a small flow on the reference pages at the intended insertion location. But now, with FP_ApplyFormatRules on the horizon, I'm quite confident to get even the complicated stuff under control, which cannot be handled by the XSLT pre-processing, as it is based on the actual formatting of the document at run-time and cannot be anticipated in pre-processing.
--Franz -
Performance issues with the Tuxedo MQ Adapter
We are experimenting some performance issues with the MQ Adapter. For example, we are seeing that the MQ Adapter takes from 10 to 100 ms in reading a single message from the queue and sending to the Tuxedo service. The Tuxedo service takes 80 ms in its execution so there is a considerable waste of time in the MQ adapter that we cannot explain.
Also, we have looked a lot of rollback transactions on the MQ adapter, for example we got 980 rollback transactions for 15736 transactions sent and only the MQ adapter is involved in the rollback. However, the operations are executed properly. The error we got is
135027.122.hqtux101!MQI_QMTESX01.7636.1.0: gtrid x0 x4ec1491f x25b59: LIBTUX_CAT:376: ERROR: tpabort: xa_rollback returned XA_RBROLLBACK.
I am looking for information at Oracle site, but I have not found nothing. Could you or someone from your team help me?Hi Todd,
We have 6 MQI adapters reading from 5 different queues, but in this case we are writing in only one queue.
Someone from Oracle told us that the XA_RBROLLBACK occurs because we have 6 MQ adapters that are reading from the same queues and when one adapter finds a message and try to get that message, it can occurs that other MQ Adapter gets it before. In this case, the MQ adapter rollbacks the transaction. Even when we got some XA_RBROLLBACK errors, we don´t lose message. Also, I read something about that when XA sends a xa_end call to MQ adapter, it actually does the rollback, so when the MQ adapter receives the xa_rollback call, it answers with XA_RBROLLBACK. Is that true?
However, I am more worried about the performance. We are putting a request message in a MQ queue and waiting for the reply. In some cases, it takes 150ms and in other cases it takes much more longer (more than 400ms). The average is 300ms. MQ adapter calls a service (txgralms0) which lasts 110ms in average.
This is our configuration:
"MQI_QMTESX01" SRVGRP="g03000" SRVID=3000
CLOPT="-- -C /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg"
RQPERM=0600 REPLYQ=N RPPERM=0600 MIN=6 MAX=6 CONV=N
SYSTEM_ACCESS=FASTPATH
MAXGEN=1 GRACE=86400 RESTART=N
MINDISPATCHTHREADS=0 MAXDISPATCHTHREADS=1 THREADSTACKSIZE=0
SICACHEENTRIESMAX="500"
/tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg:
*SERVER
MINMSGLEVEL=0
MAXMSGLEVEL=0
DEFMAXMSGLEN=4096
TPESVCFAILDATA=Y
*QUEUE_MANAGER
LQMID=QMTESX01
NAME=QMTESX01
*SERVICE
NAME=txgralms0
FORMAT=MQSTR
TRAN=N
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCRQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCPQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPSAQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPINQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KDECQ01
Thanks in advance,
Marling -
I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?
Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this. -
Performance issue with Jdeveloper
Hi Guys,
I am experiencing strange performance issue with Jdeveloper 10.1.3.3.0.4157. There are many other threads regarding the performance issue in this forum, but the problem I have is a little bit different.
I have two computers: one is Athlon 3200+ with Vista and another one is P4 dual core 6400 with XP (service pack 2). Both of them have 2GB memory.
I am running the same simple project on both computer, but only the one with Vista has the problem. The problem is very similar to the problem mentioned in the thread:
Re: IDE has become extremely slow?
But it's much worse. It only happens only on JSF pages. Basically, any operations on the JSF pages are very slow. Loading the page, changing the attributes of a button in source editor, or even clicking the items in the design view take forever to run.
The first weird thing is that it may use 100% CPU, but it never recover, which means the 100% CPU usage never stops or when it stops, the Jdeveloper stops responding.
The second weird thing is that the project is not big. Actually, it's very small. The problem started to happen since last week. There are not big changes during the period. The only thing I can say is that we created two more JSF pages.
The third weird thing is that the same project never happened on the P4+XP box. When I open the project on the P4+XP box, it’s always fast and no CPU spike.
Any advises are welcome!
Thanks,
StevenHi Guys,
I re-made a simple test project for this problem and now I now always reproduce the problem in JDeveloper on both system (XP & Vista). Everytime I open this jspx file in the source editor and try to scroll up/down the source file, or manually delete an attribute, JDeveloepr will hang and the CPU usage is 0%.
Here is the content of the test file:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
<afh:html binding="#{backing_streettypedetail.html1}" id="html1">
<afh:head title="streettypedetail"
binding="#{backing_streettypedetail.head1}" id="head1">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
</afh:head>
<afh:body binding="#{backing_streettypedetail.body1}" id="body1">
<af:messages binding="#{backing_streettypedetail.messages1}"
id="messages1"/>
<h:form binding="#{backing_streettypedetail.form1}" id="form1">
<af:panelForm binding="#{backing_streettypedetail.panelForm1}"
id="panelForm1">
<af:inputText value="#{bindings.streetTypeID.inputValue}"
label="#{bindings.streetTypeID.label}"
required="#{bindings.streetTypeID.mandatory}"
columns="#{bindings.streetTypeID.displayWidth}"
binding="#{backing_streettypedetail.inputText1}"
id="inputText1">
<af:validator binding="#{bindings.streetTypeID.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.description.inputValue}"
label="#{bindings.description.label}"
required="#{bindings.description.mandatory}"
columns="#{bindings.description.displayWidth}"
binding="#{backing_streettypedetail.inputText2}"
id="inputText2">
<af:validator binding="#{bindings.description.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.abbr.inputValue}"
label="#{bindings.abbr.label}"
required="#{bindings.abbr.mandatory}"
columns="#{bindings.abbr.displayWidth}"
binding="#{backing_streettypedetail.inputText3}"
id="inputText3">
<af:validator binding="#{bindings.abbr.validator}"/>
</af:inputText>
<f:facet name="footer">
<h:panelGroup binding="#{backing_streettypedetail.panelGroup1}"
id="panelGroup1">
<af:commandButton text="Save"
binding="#{backing_streettypedetail.saveButton}"
id="saveButton"
actionListener="#{bindings.mergeEntity.execute}"
action="#{userState.retrieveReturnNavigationRule}"
disabled="#{!bindings.mergeEntity.enabled}"
partialSubmit="false">
<af:setActionListener from="#{true}"
to="#{userState.refresh}"/>
</af:commandButton>
<af:commandButton text="Cancel"
binding="#{backing_streettypedetail.cancelButton}"
action="#{userState.retrieveReturnNavigationRule}"
id="cancelButton">
<af:setActionListener from="#{false}"
to="#{userState.refresh}"/>
</af:commandButton>
</h:panelGroup>
</f:facet>
</af:panelForm>
</h:form>
</afh:body>
</afh:html>
</f:view>
<!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_streettypedetail-->
</jsp:root>
Can anybody take a look at the file and let me know what's wrong with it?
Thanks in advance.
Steven -
Performance issue with view selection after migration from oracle to MaxDb
Hello,
After the migration from oracle to MaxDb we have serious performance issues with a lot of our tableview selections.
Does anybody know about this problem and how to solve it ??
Best regards !!!
Gert-JanHello Gert-Jan,
most probably you need additional indexes to get better performance.
Using the command monitor you can identify the long running SQL statements and check the optimizer access strategy. Then you can decide which indexes might help.
If this is about an SAP system, you can find additional information about performance analysis in SAP notes 725489 and 819641.
SAP Hosting provides the so-called service 'MaxDB Migration Support' to help you in such cases. The service description can be found here:
http://www.saphosting.de/mediacenter/pdfs/solutionbriefs/MaxDB_de.pdf
http://www.saphosting.com/mediacenter/pdfs/solutionbriefs/maxDB-migration-support_en.pdf.
Best regards,
Melanie Handreck -
Performance issue with MSEG table
Hi all,
I need to fetch materials(MATNR) based on the service order number (AUFNR) in the selection screen,but there is performance isssue with this , how to over come this issue .
Regards ,
AmitHi,
There could be various reasons for performance issue with MSEG.
1) database statistics of tables and indexes are not upto date.
because of this wrong index is choosen during the execution.
2) Improper indexes, because there is no indexes with the fields mentioned in the WHERE clause of the statement. Because of this reason, CBO would have choosen wrong index and did a range scan.
3) Optimizer bug in oracle.
4) Size of table is very huge, archive.
Better switch on ST05 trace before you run this statements, so it will give more detailed information, where exactly time being spent during the execution.
Hope this helps
dileep -
Lost of signal with location services.
whenever i use any application with location service(ie. facebook app,google maps, find friends, etc), 20 -30 sec. into it i lose all signal...***!!!!
i have tried not restoring from back up...still same issues another 4s is having same issues.
help please extremely frustrated coming from a perfectly working iPhone 4.lost
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I received this error today "unable to communicate with locator service to retrieve available files"
We use CSM to push out IPS updates and we recieved this error when we tried to manually retrieve the IPS update from Cisco.com. I wonder if the CCO server is having issues again because this happened last month when it rejected requests for updates. We did recieve the same error "Unable to communicate with locator service to retrieve files." at that time as well. Has anyone else experienced this problem?
This error is usually due to problems with the CCO server. Are you able to ping www.cisco.com from the CSM server? What ip address does ww.cisco.com resolve to? The problem could be a transient issue so do you get the same error if you try the IPS update again?
-
"Test Error" - "raise the issue with your service ...
Help!
I have had performance problems on my broadband for quite a while but not been able to progress. The usual number based test from BT says we should get between 4 and 7 mbps. In reality we struggle to get 2 mbps, frequently lanquishing at 1.5 mbps.
I have been onto http://speedtester.bt.com/ to get analysis on the line (previously having had problems with our profile) but whenever I try to run a test (over several weeks) I now always get the reply:
The Performance Tester is currently unable to run a speed test for your broadband connection. Please try again shortly, however if this problem persists, raise the issue with your service provider.
Following up on this with the Indian call centre was an exercise in futility, they just couldn't understand what I was talking about and just wanted to follow the usual script for speed problems. The last time I tried they said they'd found an error at the exchange which they would fix shortly. The result of the "fix" was that our phone and broadband disappeared for 4 days and resolving this came with the usual threat of charging us £99 is the problem wasn't BTs fault. The fault was fixed without any explanation but subsequently I've been reluctant to follow up the problem through this route.
I don't know how to go about getting someone to fix the problem without being able to run the speed tests that BT will accept.
I would greatly appreciate some assistance from this usually very helpful group.
Thanks,
Andrew
Solved!
Go to Solution.John,
Thank you for answering.
The details from my ASDL statistics are below. I cannot provide a BT Speedtester result - this is one of the problems I was raising. I have done a quiet line test and there is no noise. I don't have an internal master socket; I have an external grey box from which a number of wires run to various sockets.
Thanks,
Andrew
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
1 days, 16:42:25
Downstream:
4.063 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.6 dB / 20.0 dB
Line attenuation (Down/Up):
44.0 dB / 25.0 dB
Output power (Down/Up):
20.1 dBm / 12.4 dBm
FEC Events (Down/Up):
4667988 / 202
CRC Events (Down/Up):
4713 / 192
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
86618 / 162
Error Seconds (Local/Remote):
33661 / 5662 -
Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?
Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks -
Performance issues with pipelined table functions
I am testing pipelined table functions to be able to re-use the <font face="courier">base_query</font> function. Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? The <font face="courier">processor</font> function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
TYPE resultset_typ IS REF CURSOR;
TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
TYPE table_typ IS TABLE OF row_typ;
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ;
c_default_limit CONSTANT PLS_INTEGER := 100;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ
IS
o_resultset resultset_typ;
BEGIN
OPEN o_resultset FOR
SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB;
RETURN o_resultset;
END base_query;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
IS
aa_source_data table_typ;-- := table_typ ();
BEGIN
LOOP
FETCH p_source_data
BULK COLLECT INTO aa_source_data
LIMIT p_limit_size;
EXIT WHEN aa_source_data.COUNT = 0;
/* Process the batch of (p_limit_size) records... */
FOR i IN 1 .. aa_source_data.COUNT
LOOP
PIPE ROW (aa_source_data (i));
END LOOP;
END LOOP;
CLOSE p_source_data;
RETURN;
END processor;
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT /*+ PARALLEL(t, 5) */ colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM TABLE (processor (base_query (argA, argB),100)) t
GROUP BY colC
ORDER BY colC
END with_pipeline;
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM (SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB)
GROUP BY colC
ORDER BY colC;
END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PMEarthlink wrote:
Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701
Maybe you are looking for
-
Is there a limit to number of photos AppleTV screensaver can display?
Hi, I have a album of 600 photos homeshared in iTunes from iPhoto 09 that the AppleTV sees. However, once the photos start playing only about 20 percent show up, the ones at the beginning of the album and not the ones at the end. Anyone else experien
-
Server Error: When clicking on "Drill Through to FDM"
Hi Everyone, I am getting a server error (404 Resource not found) whenever I click on "Drill through to FDM" from a datagrid cell in HFM. I found that the link it was trying to access was http://in-ccubicoe3/HyperionFDM/AuthorizedPages/IntersectionSu
-
Handling a .dmp file in Oracle or Access
Hello! I need to open a .dmp file in either Oracle or Access 2000. Please let me know how this is possible?
-
I got a problem with runing RMI application.Sometimes it works well, but when I made some changes to Impl class, it sometimes shows : Exception in thread "main" java.rmi.ServerException: Server RemoteException; nes ted exception is: java.rmi.Unmarsha
-
Ok, i will seek help one more time...mail
ever since i installed leopard, mail crashes on startup when included in login items. it starts up, shows the inbox, the disk churns, it crashes. it always works find on restart or if i start it after the login process has completed. why???