Performance limitations on the CSS - What are they ?

Hi, we have two CSS11503 and two 11050 boxes which we think could be hitting the limits in how much traffic, concurrent connections etc they can handle.
Does anyone have a link to the Cisco figures for what these boxes can handle, and is there a way to get this info from the boxes ?
cheers,
Mike

Mike,
the drop counter in the flow stat increases when there is no FCM memory available. No if the box is overload.
For your cpu issue, you may check 'sho ip stat' to see what amount of traffic you get.
There is the possibility of a process going crazy and consuming all CPU, but I do not think you would have both SCM and SAM running very high at the same time.
You can do a 'cpu hog 1' to see the most recent process. Do it several times.
If the same process comes again and again that's the one consuming the CPU.
If it is something like tFlowMgrPktRx it means you are simply receiving a lot of traffic.
Is your content rule affecting the box a L7 rule ? If yes, try to make it L3/4 to see if that helps. Just to confirm this is related t o traffic.
Gilles.

Similar Messages

  • After the latest update I see little arrows on some tabs, above the X. What are they?

    They look like small fish hooks. They appear and disappear depending on what tab I have selected; otherwise they do nothing and have no Tooltips.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    :[[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

    I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

    Presumably the mains cable, which you can get from an Apple Store.

  • Yosemite 10.10.2 server app. FTP help. I have a program running in my local server enviroment that wants to FTP to my mac folder. It asks for the server , name, password, port and path. what are they?

    So I have set up a localhost area in my Mac. I have the new server.app and I am running yosemite 10.10.2 .
    I have a program running in my local server enviroment that wants to FTP to my mac .
    It asks for the server , name, password, port and path. what are they?
    I am pretty certain that the Serveris "localhost",
    Name is my macs name (like my-mac-min)
    password is "my login password"
    and they suggest port 21.
    But what is the file path, lets just say my site is set up http://localhost/siteftp and is actually at my Users/Sites/siteftp folder.
    Why cant this program connect to the mac.
    Is it because they are both operating in the same localhost enviroment,
    could it be my folder permissions are not correct on siteftp folder?
    Help please !

    I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
    Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

  • What are the frequencies all versions of the iPhone 6 and what are they used for (e.g. GSM, 3G, LTE, WIFI, Bluetooth,etc...) provided with channel numbers per frequency

    what are the frequencies all versions of the iPhone 6 and what are they used for (e.g. GSM, 3G, LTE, WIFI, Bluetooth,etc...) provided with channel numbers per frequency.

    Click here

  • What are they mean for the colors which are present in RPD

    Hai
    In RPD we will find different colors right side to the databases,tables like green ,sky blue , marked as red in middle , yellow , given sysmbol like Stop with red color. Please any can give me brief idea for what they are indicated in different colors
    Thank you
    manu

    Hi
    Thank you..
    Yes i am asking about Colors to icons in RPD,in phsical layer , presentation layer, BUsiness model layer
    There are colors for icons like blue , yellow, etc...
    what are they mean with the color
    can you tell me please about this

  • Can adobe patch files be deleted what are they whay do they take up so much space

    Can adobe patch files be deleted? What are they and why does it take up so much space?

    sweetboo5
    If you are using Premiere Elements 9 Mac, then the next thing to do is to get details on what you mean by "patch files".
    There are no "patch files" as you describe. There is a Premiere Elements 9.0.1 Update that needs to be used with the program. That you install and do not uninstall for best performance of the product.
    What I am wondering is this. Do you mean by patch files and the description that you give Scratch Files?
    If so, then you are looking at preview files and conformed audio and video files.
    I am strictly an Elements Windows person so you will have to help me translate my Premiere Elements 9.0/9.0.1 Windows instructions into meaningful ones for you as it relates to file location.
    Under Edit Menu/Preferences/Scratch Disk, where do you have Video Previews and Audio Previews directed. At that location, you should be able to delete these files. They are automatically generated when you render Timeline content. The consequence of deletion is that you will need to render again content in the project from which they came (if that project still exists). Go to the location shown and delete.
    Then look to see where the Media Cache is directed. Those are conformed audio and video files (cfa and pek). They can be deleted and will be regenerated by the program if and when needed. Go to the location shown and delete.
    Then look to Edit Menu/Preferences/Media and the Media Cache Database. That is targeting conformed video files (.mcdb file extension). They can be deleted and will be regenerated by the program if and when needed. You can click on the Clean button there to get rid of them instead of following the path to them as shown in the Media Cache Database area.
    Do not delete any source media that went into projects after they were saved closed.
    Please review the above and do not hesitate to ask if you need clarification on anything that I have written.
    If none of the above applies to your question, then please more details.
    Thanks.
    ATR

  • Are there any enhancements from BPC 5.1 to BPC 7.0?  If so what are they?

    Are there any enhancements from BPC 5.1 to BPC 7.0?  If so what are they?  We are trying to figure out whether or not to capitalize an upgrade.

    Hi,
    There have been lot of enhancements incorporated in BPC 7.0
    1. BPC 5.1 was running either on SQL 2000 or SQL 2005. However, BPC 7.0 works on SQL 2005 or SQL 2008. The preferred one is SQL 2008, since the performance is much better.
    2. Because of the change in the SQL version, BPC 5.1 was able to support DTS packages alongwith DTSX. However, BPC 7.0 supports only DTSX packages.
    3. The logic debugger is in place to debug the script logics.
    4. While processing the dimension, there is an option for validating the dimension logics written.
    Hope this gives you some idea on the enhancements.

  • .itc files.  What are they?

    Can someone tell me what the .itc files are that are stored in the Album Artwork Cache folder on the hard disk in the iTunes folder? I came across some while I was doing a search, thought they were something else and started to delete them. Now I have a bunch of them sitting in my trash and I'm not sure if I should permanently delete them or not. At the same time, I can't figure out which ones go in which folders if I were to try and put them back to their original location. If I delete them, will they be automatically generated again? Are they necessary for something? What are they?

    They are definitely downloaded pic files. I say pic files, because instead of album artwork, they are actually small picture files of classical music composers pulled from various sites on the web.
    I used "album artwork" in a loose sense inasmuch that you could put a photo of your dog into iTunes and call it album artwork.
    Anyway, I guess my next question is what to do now?
    Uh, I am disinclined to experiment with my iTunes, if you don't mind, so I'm not sure.
    Does the artwork still show up in iTunes because I haven't emptied the trash yet?
    I suspect those files need to be in specific locations in order to be seen.
    Since you downloaded these yourself vs. fetched with iTunes it may be they are embedded in the files and not just present in the artwork folders. I download artwork and then paste it onto my mp3s which means the artwork is actually in the file in addition to whatever file itunes may make based upon the folder. I also notice that if I have a mp3 from the same album but have not embedded artwork in the mp3 it still displays art for that album. I think iTunes is displaying this art using the itc it generated from the album that does have artwork. So it may not matter that you have deleted the itc file if the artwork is embedded in the file or there is another album file with the artwork.
    Is there a way to know where to replace them if I just pulled them out of the trash? That is what I can't figure out based on the names of the files. There doesn't seem to be any corresponding data in the file name as it would relate to the folder that it came from.
    iTunes works in mysterious ways its wonders to perform. I suspect you might be able to replace the files if you were to go into the itunes library files and browse through the entries trying to associate all the code identities from the various listings. Not my idea of fun.

  • What are Crypto Cards, and what are they different from Java Cards?

    Hi,
    I just heard the name 'Crypto Card'. I thought Java Card is the only standard for smart card. Could anyone tell me what are Crypto Cards, and what are they different from Java Cards? Thanks in advance.
    Joey

    Probably any card that offers cryptographic capabilities (crypto coprocessor) could be called "Crypo Card", but likely the term was referred to cards offering a pkcs#11 interface.
    Pkcs#11 is the standard for accessing crypto devices, like tokens, cards, or accelerators. Such a device can be easily accessed for example from your browser to perform cryptographic and digital signature operations.
    A Javacard can operate as a pkcs#11 device in you install on it an applet dealing with the pkcs#11 requests.

  • I have a long list of gibberish files, in Preferences, in my Library. What are they? How did they get there? Can I delete them?

    I have a long list of gibberish files, in Preferences, in my Library. What are they? How did they get there? Can I delete them without causing a problem?

    Here is one thing I found googling for WebEx:
    http://www.webex.com/why-webex/overview.html
    (The x64 would most likely mean 64 bit). It may be a Windows based application/plugin, but since I had never heard of either, I'm only guessing there. If you do a search systemwide for it and don't find it plus don't know why it's there, I'd say throw it in the trash (don't empty it yet - make a note of the file path just in case you do have something installed that needs it so you can move it back).
    Glad to hear it's not a torrent; some people use those not realizing that quite often there is a price to pay for downloading stuff for free that costs money elsewhere - the software packages quite often include little "add-ons" = malware which you really don't want.

  • How many types of tables exists and what are they in data dictionary?

    hi,
    How many types of tables exists and what are they in data dictionary?
    regards.

    Hello Liu,
    Please search in forum before posting any question .
    anyhow check the below link :
    http://web.mit.edu/sapr3/dev/sap_table_types.htm
    Thanks
    Seshu

  • SCCM 2012 SP1 - Evil Folders in Reporting Services - What Are They and How to Remove Them

    Hello All,
    There are a lot of sub-folders in the http://CentralSiteSCCM/ReportServer. They are like:
    <dir> Config_Mgr_CEN
    <dir> Config_Mgr_CEN.OLD.0
    <dir> Config_Mgr_CEN.OLD.1
    <dir> Config_Mgr_CEN.OLD.10
    <dir> Config_Mgr_CEN.OLD.100
    <dir> Config_Mgr_CEN.OLD.1000
    Only <dir> Config_Mgr_CEN is properly populated with the correct set of the default folders.
    Would you be so kind to advise on:
    What are they?
    How to remove them?
    What to do in order for them not to appear any more?
    Thank you very much in advance!

    Hi Mike,
    I ran into an issue when I did the SP1 upgrade where a majority of our reports were duplicated. I created a script to delete these duplicate reports and I've adjusted it to work for your situation. You can find the original thread here, if you're interested:
    http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
    You'll need to know your SCCM site code and the server name to run this script.
    # SCCM2012SP1-RemoveDuplicateSSRSFolders.ps1
    # This script will connect to SSRS on a specified server and delete all folders that end with .OLD.*
    # Used for SSRS cleanup after SCCM 2012 SP1 installation
    # Script must be run from an account that has access to modify the SSRS instance
    # 3/22/2013 - Mike Laughlin
    # Resources used in writing this script:
    # Starting point: http://stackoverflow.com/questions/9178685/change-datasource-of-ssrs-report-with-powershell
    # API Documentation: http://msdn.microsoft.com/en-us/library/ms165967%28v=sql.90%29.aspx
    # Previous script: http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
    # Define variables
    $SiteCode = ""
    $serverName = ""
    # Set the value of $noConfirm to $True only if you don't want to manually confirm folder deletion. Use with caution.
    $noConfirm = $False
    # Safeguard
    If ( $SiteCode -eq "" -or $serverName -eq "" ) { Write-Host "Enter the required information for the SiteCode and serverName variables before running this script." -ForegroundColor Red -BackgroundColor Black ; Exit }
    # Connect to SSRS
    $ssrs = New-WebServiceProxy -uri http://$serverName/ReportServer/ReportService2005.asmx?WSDL -UseDefaultCredential
    # Get a listing of all folders in SSRS
    $reportFolders = $ssrs.ListChildren("/", $True)
    # Find all folders containing .OLD.*
    $foldersToDelete = $reportFolders | Where { $_.Name -like "ConfigMgr_" + $SiteCode + ".OLD.*"}
    # Quit if no folders are found
    If ( $foldersToDelete.Count -eq 0 ) { Write-Host "No folders with .OLD.* found. Quitting." ; Exit }
    # Show a listing of the folders that will be deleted
    Write-Host "The following folders will be deleted from SSRS on" $serverName":`n"
    $foldersToDelete.Name
    Write-Host "`nTotal number of folders to delete:" $foldersToDelete.Count "`n"
    # Get confirmation before deleting if $noConfirm has not been changed
    If ( $noConfirm -eq $False )
    $userConfirmation = Read-Host "Delete these folders from" $serverName"? Enter Y or N"
    If ( $userConfirmation.ToUpper() -ne "Y" ) { Write-Host "Quitting, folders have not been deleted." ; Exit }
    # Delete the folders
    $deletedFolderCount = 0
    Write-Host "Beginning to delete folders now. Please wait."
    ForEach ( $folder in $foldersToDelete ) { $ssrs.DeleteItem($folder.Path) ; $deletedFolderCount++ }
    Write-Host "Folders have been deleted. Total number of deleted folders:" $deletedFolderCount
    Standard disclaimer: While this script worked just fine for me in my environment, I make no guarantees that it will work anywhere else. I've attempted to make this script as user friendly and generic as possible, but it may require slight tweaking to work properly.

  • Today, I randomly happened to have less than 1GB of hard drive space left. I found very large "frame" files, what are they?

    I found very large "frame" files, what are they & can I delete them? (See screenshot). I'm a (17 today)-year-old film-maker and can't edit in FCP X anymore because I "don't have enough space". Every time I try to delete one, another identical file creates itself...
    If that can help: I just upgraded to FCP 10.0.4 and every time I launch it it asks to convert my current projects (I know it would do it at least once) and I accept, but everytime I have to get it done AGAIN. My computer is slower than ever and I have a deadline this friday
    I also just upgraded to Mac OS X 10.7.4, and the problem hasn't been here for long, so it may be linked...
    Please help me!
    Alex

    The first thing you should do is to back up your personal data. It is possible that your hard drive is failing. If you are using Time Machine, that part is already done.
    Then, I think it would be easiest to reformat the drive and restore. If you ARE using Time Machine, you can start up from your Leopard installation disc. At the first Installer screen, go up to the menu bar, and from the Utilities menu, first select to run Disk Utility. Completely erase the internal drive using the Erase tab; make sure you have the internal DRIVE (not the volume) selected in the sidebar, and make sure you are NOT erasing your Time Machine drive by mistake. After erasing, quit Disk Utility, and select the command to restore from backup from the same Utilities menu. Using that Time Machine volume restore utility, you can restore it to a time and date immediately before you went on vacation, when things were working.
    If you are not using Time Machine, you can erase and reinstall the OS (after you have backed up your personal data). After restarting from the new installation and installing all the updates using Software Update, you can restore your personal data from the backup you just made.

  • Thousands of strange images on  iPhoto what are they?

    I tried to down load my pics in iphoto into a file I could put on an external hard drive for back up. Now i have thousands of images some of which are called resources,water color text mat , uk.iprog ect. What are they & how do I make them go away?  I'm vexed and bewildered.

    It sounds like the hard drive was accidently dragged into the iPhoto window or onto the iPhoto icon in the Dock.  If you downloaded your pics into a new library try starting over with a new library and see if you can avoid those images.
    OT

Maybe you are looking for