Performance log for ORACLE 10g
Hi everyone can anybody tell me where i can get the reporting from the performance logs in oracle 10g>?
i need to generate reports for audit trail, no of hits in the portal , top ten url , and how often the user view a page or portlet?
i thank you all in advance .....look forward for replies....thank you
Thaks for the reply...
but i cant go to the link =( may i ask u abt this , i read this link http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/MONITOR_DIAGNOSTICS_ANALYTICS_PORTAL.HTM#1
STATING : Oracle9iAS Portal Release 2 (9.0.4) provides some new, additional metric information. This release also collects some (pre-defined) metrics in the Oracle Enterprise Manager Central Console and creates historical reports, which can be published via Oracle Management Portlets on Portal pages
How to do the publishing? is there any references that will guide me from how to use the metrics to published in the portal pages? i requires all these ....PLEASE HELP
Similar Messages
-
VSS Agent for Oracle 10g ?
Hi there,
I have SAP NW2004s, Windows 2003 server 64bit, Oracle 10g
4 partition with 1 hdd, C for OS, D for SAP application E for system and oracle logs+archived, F for only database files
We are trying to get backup in extrinal HDD 3TB HDD... through Symantic exec backup utility ver. 12
C and D drivers are backup fine, but sometime when server very busy and symantic start full backup for E and D drive database shutdown... sap instance is fine, but only DB instance is stoped
We are not using Symantec Agent software, is there any other software can help for that for-exmaple VSS for oracle 10g... if yes, where may i get this software any link?
Why we are not using BR tools:
1 - as i maintion before when I select "E" drive which is all logs files located symantec stoped db instance
2 - in case if i am taking backup from brtools full backup online + archived so its only take database backup + archived, not all others structure in case hard-drive failer, and data restore from symantec so its will be ok with C drive and D drive, but its nohting resotre for E and D
when I try to restore from oracle brtools to restore its getting an error for missing structure in E
so thats why I am looking only one solution either perfect symantec with online backup
please give me some advised
ThanksHi,
Please use the standard & reliable Backup/Restore methods for any DB, to avoid more headache while Backup/Restore Operations.
Please refer [this thread|Re: Need some advise]. it will attend your most of questions. Some other alternatives (without using Backup agent) are mentioned there.
If you use Backup Agent to perform any DB backup, then It will be reliable method to perform Backup/Restore operations of DB.
With BR*tools u can also perform Non-Database Backup. Please refer [this link|http://help.sap.com/saphelp_NW04/helpdata/en/0c/cd271365debc42bef96ac7fd907787/frameset.htm] and other relative links.
If you have configured the Backup Exec utility with Oracle agent on the DB server, then you can perform Online Backup by deselecting "Perform the backup offline" option withing that Oracle Backup Job properties.
Regards,
Bhavik G. Shroff -
Note 830576 - Parameter recommendations for Oracle 10g
hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards, -
Enable autoarchiving for Oracle 10g RAC db
Hello
What are the steps to enable autoarchiving for Oracle 10g cluster database?
It is currentrly in noarchivelog mode.
Thank you,
YelenaHi.
I think that this has been improved in 10g, so that we can do an exclusive mount on any database in a RAC without setting cluster_database to false. Also the parameter log_archive_start has been depreciated so the steps is simply (assuming that you by default wants to use db_recovery_file_dest to store archived redo logs)
1) Shutdown immediate (instance 1)
2) Startup mount
3) Alter database archivelog
4) Alter database open
Repeat this sequence for all nodes in the RAC.
And the best is to leave the log_archive_format by it's default value, to ensure that the incarnation of the database is represented in the archive log name.
(On 10g, backupsets and archivelogs are usable beyond different reincarnation of a database, so there is a good change that S% or s% will repeat itself after an open resetlogs).
Hopes this might help you.
Good Luck
Rgds
Kjell Ove -
Performance Logging of OracleAS Portal
Hello Everyone,
I want to turn on performance logging for my OracleAS Portal instance. I am referring README file. The Prerequisite for the same is that
Oracle Portal middle tier should be on following release:
· 3.0.9(must be at patch set 3.0.9.8.3 or higher), 3.0.9.8.2 and previous versions are not supported.
· 9.0.2.3 or higher.
Can anybody tell me, how can I check the release and patchset level for my Portal instance.
Secondly I have turn on the trace level to info in httpd.conf files and restart the OracleAS, but while trying to upload accesslog/errorlog into owa_perf schema through loadlogs.pl, no data is being uploaded. Any clue when I may be wrong?
Regards,
Neeraj Bhatiawhat version your Application server?
In IAS 10.1.0.2 you find .. click Administer Tab.. under service there is link call global settings click global settings ...
you can see version bottom of the page..
ex:
Version Information
Oracle Portal Version: 10.1.2.0.2 (Build: 139) -
Documentation for Oracle 10g Lite
Hello
I have docummnetation for oracle 10g Lite but there is only informations what to do step by step. I'm looking generally informations about the features mobile databases, synchronization system, managment, and all development support. Where can I find them??I run Oracle Lite on Pocket PC, and I make some simple program which did some operations on database. I know that the support for .NET is small. But I'm writing the master of science work about three mobile databases (sql ce, oracle lite and sybase) and I have to write a program which will be testing performance of those databases on the mobile device.
Generally I hope this program will work ok. But I also have to write about fuures for example oracle database lite RDBMS, but in documentation there is only few generally informations and almost all document is about how to configure it and how to do something.
So if you have some generally documents (I have those white papers and other pfd on oracle site) please send it to me [email protected] . -
Archiving Best Practices / How To Guide for Oracle 10g - need urgently
Hi,
I apologize if this is a silly question. But i need a step by step archiving guide for Oracle 10g and cannot find any reference document. I am in a rather remote part of S.E. Asia & can't seem to find DBA's with the requisite experience to do the job properly. I have had 1 database lock up this week at a big telecoms provider and another one at a major bank is about to go. I can easily add LUNS & re-structure mirrors etc at the Unix level [ i am a Unix engineer ]
but i know that is not the long run solution. I am sure the 2 databases i am concerned about have never been archived properly.
This is the sort of thing DBA's must do all the time. Can someone point me to the proper documentation so i can do a proper job and archive a few years data out of these databases. I do not want to do a hack job. At least i can clone the databases and practise on the clones first before i actually do production.
-thanks very much
-gregoire
[email protected]I'm not so sure this is a general database question, as it would be specific to an application and implementation, and as the technology has changed, the database options to support it has too.
So for example, if you have bought the partitioning option, there may be some sensible procedure for partitioning off older data.
Things may depend on whether you are talking about an OLTP, a DW, a DSS, or mixed systems.
DBA's do it all the time because the requirements are different everywhere. Simply deleting a lot of data after copying the old data to another table (as some older systems do) may just wind up giving you performance problems scanning swiss-cheesed data.
Some places may not archive at all, if they've separated out OLTP from reporting. If all the OLTP stuff is accessed through indices, all the older stuff just sits there. The reporting DB may only have what is needed to be reported on, or be on a standby db where range scans are sufficient to ignore old data. There there's exadata, which has it's own strengths.
Best Practices have to be on similar enough systems, otherwise they are a self-contradiction.
Get yourself someone who understands your requirements and can evaluate the actual problem. No apology needed, it is not a silly question. But what is silly is assuming what the problem is with no evidence. -
Error while creating datasource userdsn for oracle 10g Errorcode (998)
while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon
Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
Oracle gateway for Oracle 10g DB on Windows 64 bit server
Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.
yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database? -
Long-term retention backup strategy for Oracle 10g
Hello,
I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
Regards and thanks in advanceHello;
RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
I would let the tape backup system handle the retention of your rman backups.
Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
Oracle 10
Keeping a Long-Term Backup: Example
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
Oracle 11
If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
keep until time 'sysdate+1825'More info :
RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
Best Regards
mseberg
Edited by: mseberg on Dec 4, 2012 7:20 AM -
Can't Create the ODBC connection for Oracle 10g
Hi,
I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator library
Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
Best Regards,mwz wrote:
I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not? -
Where can I download the ODBC driver for Oracle 10g XE?
where can I download the ODBC driver for Oracle 10g XE?
I need the ODBC drivers for windows 7 x64, I installed Oracle Database 10g Express Edition, the use and connects with RazorSQL well, I just want to make a connection THROUGH ConnectionString language using the ODBC driveralready checked these http://www.connectionstrings.com/oracle, I need Help Please.
-
SAP Note 830576 - Parameter recommendations for Oracle 10g
As per SAP Note 830576 - Parameter recommendations for Oracle 10g, I have tried to change the value for
parameter "db_file_multiblock_read_count".
In sql prompt it shows:
SQL> show parameter DB_FILE_MULTIBLOCK_READ_COUNT
NAME TYPE VALUE
db_file_multiblock_read_count integer 128
and in brtools it shows:
58 - db_file_multiblock_read_count both no * yes 128
But I got the following error, when i tried to set it null
1 * Parameter description (desc) ..... [db block to be read each IO]
2 * Parameter type (type) ............ [integer]
3 * Current parameter value (parval) . [128]
4 * Value in spfile (spfval) ......... []
5 # New parameter value (value) ...... [null]
6 - Scope for new value (scope) ...... [both]
7 # Database instance (instance) ..... []
8 ~ Comment on update (comment) ...... []
9 - SQL command (command) ............ [alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD']
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2008-08-14 18.19.22
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0301E SQL error -32010 at location BrSqlExecute-1, SQL statement:
'/* BRSPACE / alter system reset db_file_multiblock_read_count scope = spfile sid = '''
ORA-32010: cannot find entry to delete in SPFILE
BR1017E Execution of SQL statement 'alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD'' failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
Kinldy let me know, what could me wrong.Hi Markus,
As per your suggestion we have downloaded the files from UCLIB_3-20000978.SAR. But now getting the error as
sapccmsr -DCCMS -j2ee pf=profile value
INFO: use SAPLOCALHOST hostname
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/XX1_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/XX1_00/sapccmsr/csmconf
INFO: Central Monitoring System is [XX1]. (found in config file)
INFO: additional Central Monitoring System is [AS2]. (found in config file)
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH. It seems to be created as non-unicode segment.
This program runs as unicode. Please use non-unicode version
Please suggest
Thanks,
Anu -
Should I go for Oracle 10g OCA/OCP or 11g OCA/OCP Certification?
Hi all,
I am lil bit confuse to decide about my oracle core dba certification.
Please help me to know, as per the present requirements of the business organizations.
***Should I go for Oracle 10g OCA/OCP or 11g OCA/OCP Certification?***
Hope u guys answer me earliest.
Thanks & Regards,Most likely, it doesn't matter too much. I doubt that most employers are terribly concerned with what recent version of Oracle you have a certification on.
That said, if it matters
- What does your organization use? What are their plans to upgrade? If your company still uses 9.2 primarily and has plans to upgrade to 10.2 this year, you're probably better off with a 10g certification. If your company is already running mostly 11.2, you're probably better off with an 11g certification.
- What do most employers in your particular part of the world tend to use? What do job postings in your particular part of the world generally list?
Justin -
New features for oracle 10g DBA
hi all,
i want to download new features for oracle 10g dba in free, but i cant found it free.so if somebody know anylink which provide it free or if somebody have it.plz let me know.i need it on urgent basis.
Ihsan DBA from Pakhttp://www.oracle.com/pls/db102/to_toc?pathname=server.102%2Fb14214%2Ftoc.htm&remark=portal+%28Getting+Started%29
Could you not download from here?
Maybe you are looking for
-
How to Delete photos to free up space
Hi, I have been taking photos on my iphone 4 since I inherited it from my daughter. It has 16Gb memory, and I have just 1.64Gb left from 14.8 Gb. There are 5 folders, with 8digit names housing photos numbered from 0-999, 1000-1999, 2000-2999, 3000-39
-
I need to restrict user access to Workspace processes. Using the adminui, service management, I gave my test group INVOKE_PERM permissions to this service. This works good. The users of the test group can only see this process. However, for these
-
Imported Pictures are not showed in the current path
Hello i am using elements organizer 10 to organize my pictures, about 100.000. All these pictures are in the location D:/pictures/privat pictures/2001/YYYYMMDD. Each year has a lot of folders oriented by date. All this pictures are a second time at m
-
My 5800 is not starting help.....
I have nokia 5800 and it is not starting nor vibrating at startup plz help...........
-
Hi All, Created one interface which is reading from XML file and populating the data in Oracle Table. Suppose I have created interface for emp.xml file. Currently emp.xml file having 14 records and it is populating the target table successfully. Now