Performance Management - Appraisal Template is not getting transported

Hello All,
Every year we create a new Appraisal template, where in we use to transport the appraisal template by right clicking on it, change status to Release first and then right click again and transport appraisal document.
But this year transporting the document is not working out. It's not showing that template in target source.
Thanks,
Bhushan

Run the program RHSOBJCH.
It shows infotype tables with inconsistencies like IT5025 & IT5026. Adjust/fixe these inconsistencies, with this the system automatically transport the contents in those infotypes.

Similar Messages

Group title in Floor plan manager is not getting transported to quality

HI Experts,
In Component Configuration "EHHSS_INC_REC_NRM_QAF_V3_BSCI", I have added group and gave title to that group in development.
The group is getting transported when I release request but the title is not getting transported.
Could anyone help me, it's urgent.
Thanks and Regards,
Santhoshi.

posting again,
Can anyone help me as this is urgent requirement.
With Regards,
Santhoshi

Performance Management (OSA)- New supervisor not dynamically updated

PMP Appraisal template is not updating the Appraiser (Supervisor) field when an employee has an organizational movement change (e.g. Promotion/Demotion). The template keeps the same supervisor as when the template was created. New Supervisor will not show as the Appraiser. Is the only option to use the Administrator function through PHAP_ADMIN to manually change?
Thoughts appreciated on a custom solution.

Hi,
Yes. The appraisal document will not be changed automatically for changes in org structure. If the employee's manager/supervisor chnages, then the appraisal document has to be manually changed through PHAP_ADMIN.
In my prior projects, what we did is, we proposed a solution where a report will run in background and it will check the employee's current appraiser against the current supervisor. If they are not identical, then the new supervisor will be the appraiser. This report will then be scheduled as a job daily.
For this you must approach an ABAPer. Use HRHAP_DOCUMENT_MODIFY to change the appraisal document(appraiser).
Hope this helps you.
Regards,
Subbu

Contents of new costing variant, valuation variant and costing sheet not getting transported

In our development client,I have created a new costing variant, a new valuation variant and a new costing sheet in separate transports.
When I release the transports to move into the Test client, the contents of the configuration are not getting transported at all.
I tried to do them again manually using Table view - Transport , but again, if I view the transports in SE10,they don't show the table contents, etc.
Any help on this will be highly appreciated.

Ajay,
Let me make sure I understand.
Create a new TR using SE01
Go to transaction OKKN (costing variant)
Select the costing variant and then choose Table view - transport
Provide the transport number
At what point to I say 'include in request'
If I try to use the menu option Edit-Transport-Include in request in the beginning itself, the 'Include in request' is greyed out.
This is where I'm stuck

Screen Exit not getting transported - Urgent

Hello Everyone
We are implementing the enhancement PPCO0012 to display additional data in a tab on the Production Order Header. Did everything as per the documentation and activated the enhancement in SMOD and the associated project in CMOD. The transports were released to QA. The enhancement and CMOD project is also active in QA. However the screen object that was created under the function group XCO1 did not get transported to QA. Has anyone experienced this kind of a situation before?. Can you please suggest any solution to overcome this? Any help is greatly appreciated.
Thanks
Raju Ramaswamy

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

SAP Script not getting transported to Production server

Hi Friends,
The office address in the Purchase Order has been changed using T-code SE71. The changes are getting transported to QA Server, but not getting transported to Production Server.
Kindly let me know why this change is not getting transported to Production server and also guide me to correct the same.
TIA.
Regards,
Mark K

solved.

Performance Managment-- Appraisal

Hi,
I just need to make sure that i am not missing anything.
I am setting up the appraisal in the Performance Management.
I did the following steps:
1. Define my rating scale.
2. Adding competencies.
3. Adding records in the competence type
4. Create Objective template & Competency template
5. Create my appraisal template ( The FF is already created)
I tested the appraisal.. everything seems Ok i filled the appraisal information and when i reach the last step when i click "Apply", i found that the "Overall Rating" is blank.
Did I miss anything?
Should we add the FF result somewhere??
Edited by: HST on May 18, 2011 1:46 PM

Overall Rating could be Blank if you are seeing using "Employee Self Service"
If you using Manager Self Service then you can provide rating to Employees using overall rating. This is Message Choice manager have to select a value.
Give Final Rating Button will be available to Manager not to Employee.
Hope you get.
Thanks, Avaneesh

Error on Flexible Performance Management Appraisal Document

Hello Experts,
We are in the process of building Performance Management using Enhancement Package 4 in ECC 6.0. I am having issues with getting the Appraisal Document to work for MSS. Just to clarify too, I have no experience with Performance Management and the fact that we are using Enhancement package 4, our Functional consultants are not sure what to expect either. One more thing, the SICF service is activated.
*) When trying to preview the Appraisal Document (com.sap.pct.erp.mss.hap_document), I am receiving a Portal Run Time error.
*) When I go into SE80, I am using Package u2018PAOC_HAP_DOCUMENT_WD_UIu2019 to run a test on Web Dynpro Application HAP_MAIN_DOCUMENT, I am receiving u2018Access via 'NULL' object reference not possible.u2019
*) When I go into SE80, I am using Package u2018PAOC_HAP_DOCUMENT_WD_UIu2019 to run a test on Web Dynpro Configuration HAP_AC_MAIN_DOC, I am receiving u201Cu2018Error in Calling Up Applicationu2019 The Web Dynpro application was called up with the wrong URL parametersu201D.
QUESTIONS:
1) Do I have to implement Generic Performance Management (com.sap.pct.erp.mss.14.generic_performance_management) to call the appraisal document?
2) Is there any special configuration that needs to be done to make the HAP_MAIN_DOC work (portal or R/3)?
3) Do I need to manually create an SICF service for this?
4) Is there any documentation on how to implement the Flexible?
Any direction would be appreciated.
Thank you,
Mike

Hello H2R,
I copied the Iview Generic Performance Management (com.sap.pct.erp.mss.14.generic_performance_management) with Application Name 'HAP_START_PAGE_POWL_UI_MSS' and the Application Configuration Name 'HAP_START_PG_POW_MSS_AC'.
Activated the SICF services of 'hap_main_document', 'HAP_START_PG_POW_MSS_AC', 'HAP_START_PAGE_POWL_UI_MSS. Also, I would activate the services that begin with 'HAP' that l thought that I would need.
In SE80, there are 2 locations to find these Applications: 1) Web Dynpro Comp./Intf. = FPM_OIF_COMPONENT and 2) Package = PAOC_HAP_DOCUMENT_WD_UI.
As for the notes, we are on SAPK-60420INEAHRGXX, these are the notes that we applied:
1468466 - PM Launchpad Config
1463821 - PM Portal Config
1416756 - OBN Config in PM
1408243 - Config for OBN
Hope this helps,
Mike

Performance manaegment - Appraisal Template

Dear all,
I have created the Appraisal template under OSA and i have configured the predefined time lines for PMP as well. but unfortunately the appraisal tabs or their objectives are not showing in the PMP process to the manager from portal...
Secondly do i have to configure the predefined template to be used at each client.
any hints?
Edited by: waqas anwar on Nov 19, 2009 10:29 AM

Hye Chris,
Thanks for your prompt reply.
This is what its happening now:
I have two clinet one is normal client for configuration and the other is where portal is connected.
I have Created the OSA template and i have liked it with PMP ID as well.
ow I am going to: "Define Tabs and Process Configuration for Template" and i use the same template as well.
After this I am configuring Define Tabs and Process Configuration for Template
Define Templates for Performance Management = on end configuration ig gives an error
What has happened?
The URL -http://xxx.xxx.xxx:8000/sap/bc/webdynpro/sap/hap_a_tm_conf- was not called due to an error.
Note
The following error text was processed in the system KDV : Exception text is : Category 00000001 (category group 00000006) does not exist
and when i go to time line configuration of the process it gives me the following erors
An unexpected technical error has occurred..
I am able to excuate all three above mentioned nodes as normal on Golden clinet but when i come to integration client client it gives the error.
Any input will be higly appreciated.
Regards

Performance Management Appraisal Reporting

Hi Experts,
I have a business requirement to report on Final Performance Ratings via Org. Units. Standard SAP Reporting for Performance Management appears to be very limited with phap_search_pa...
I want to be able to report on Org. Units and their Final Performance Ratings so to visualize the data I am looking for:
Appraisal Template --> Org. Unit --> Individual Employee Data
Is this possible?
Thanks!
Adam P.

Hi Adam,
I dont think there is any standard report that is available to get the data as per you your requirement.
I would suggest you to develop a custom report to get the data.
Get the appraisal related data from PHAP*
Get the OM (Org units) related data from employee's 0001 infotype and pass details from FM "RH_STRUC_GET".
Get the employee related data from PA tables.
Hope this helps you.
Regards,
Subbu.

Performance Management Appraisal pull position to position

We are implementing Performance management in MSS/ESS 1.41.
The requirement is to have the appraisal document (flexible) pull position to position instead of chief to position.
Does anyone know where in the webdynpro this change should be made?
D. Maupin
University of Kentucky

Hi Donna -
This is interesting that you posted this question.
My client and I are currently trying to come up with a solution design that would work given their requirements. Without getting into details, they do not have OM implementing currently, and need a performance management process implemented now.
One solution was to build position to position and keep it very simple.
My question to you is: Are you using other functionalities in performance management, such as cascading goals? If so, are you only using it for direct reports and not at the corporate level?
Thanks,
Nick

Can i use "Oracle Database 12c: Performance Management and Tuning " training for getting certification on "Oracle Database 11g: Performance Tuning 1Z0-054"

i have taken "Oracle Database 12c: Performance Management and Tuning new" training from oracle university. Now i would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054" exam. Is it possible ?

I essentially endorse and refer you to Matthews' and John's post above.
I would differ with slightly with Matthew because my guess is you would often be able to use like for like 12c training for an 11g certification ( I believe there are precedents). BEFORE ANYONE ASKS THE OTHER WAY DOESN'T HAPPEN.
.... but totally concur with Matthew you would ill advised to procede on that basis without one of:
- This being advertised as possible on the website : e.g. https://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=654&get_params=p_id:169 ... option 2 show courses.
- Confirmation from Brandye
- Confirmation from an Oracle Certification Support Web Ticket ( http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP )
... The more common (and in my opinion usually better) way would be get your 11g DBA OCP ( or higher first) and then take the 1z0-054. I am almost certain they will accept your 12c course for the 11g DBA OCP.
If you are choosing the route of not being a 11g (or 12c ) DBA OCP first but are on option 2 and relying on the course for certification then the issue is more in the balance and you are even more strongly advised to get confirmation before proceding (remember if the rules need to be changed for you only then any profit out of the exam is lost).
In general my understanding is Oracle would prefer to encourage people to train on the latest version of product that is available for training and will prefer to avoid restrictions which would cause you to train at a lower version. ( This is simply my guess at Oracle University Policy ... personal opinion only).
Having said all I have said I'd encourage you to go with the advice of the earlier two posts.

Performance Management (Appraisal Documents) ABAP webdynpro error on HTTPS

Hello all,
Please help , in resolving the issue with Performance Management Application "Appraisal Documents" getting Blanks Screen on the routing back from "Appraisal Document" after user close the application. Issue is only applicable in 'HTTPs' and work fine in internal network.
On HTTP Watch : "ERROR_HTTP_INVALID_SERVER_RESPONSE" in the trace.
Steps to replicate :
1. User click on the "Appraisal Documents" link on the Area page and open the application on the new window.
2. User select one of the "Appraisal document" from the list available to work on it , which result in another window.
3. User close the application after finishing the work on the "Appraisal Document" and return on the Parent window "Appraisal Documents".
4. At this point "Appraisal Documents " window get refresh and every things looks great.
5. Now if user want to select another appraisal document to work on it in "Appraisal documents" window, it freeze or give blank screen.
Thanks in advance.

Hello surya,
is the problem solved?
Best regards Oliver

Performance Managment Appraisal Document - BADi- HRHAP00_DOC_BC

Hi,
I have requirement that for the appraisal Document notes section in Performance mangemet,
I need to provide the functionalities of Character count and Chacter restriction.
For this After my investigation I found I need to implement the BAdi HRHAP00_DOC_BC ( Business Check BADi).
Can any one provide me some sample code How I can implement My requirement.
Thanks

Hi Samriddhi,
The Badi "HRHAP00_DOC_BC" is a business check badi used to check the appraisal data in the appraisal document against the business check defined by the customer.
How to use: Create the Filter value in the OOHAP_BASIC tcode and add the Badi to the appraisal template under further template behaviour. This should make the appraisal docuemnt respond to the badi call.
Implementation expamle: This Badi has the method to check the data in the appraisal docuemnt against customer specific check points. Say if the custome wants the minimum rating per employee to be 1. Or Promotion as YES/eligible for employee rated at 5.
This check can be done here and an appropriate error can be raisedthrough the "return" (BAPI_RETURN ?) parameter of the method.
I dont have a SAP system with me right now. But this should be easiliy implementable by an ABAPer.
Hope this delayed response hepls you.
Regards,
Subbu

Training and Event Management - Appraisal Template

I have created an appraisal template but when I am trying to update score, it is neither creating a new APPRAISAL object nor it is getting saved. Please help me rectifying this issue.

Hi,
I donu2019t understand what you are trying ask . kindly let me know your scenario then Iu2019ll solve your problem if I could.
Prasath

Performance Management - Appraisal Template is not getting transported

Similar Messages

Maybe you are looking for