Performance Management EHP4 Flexible Appraisal Process

Hi
We are in the process of building Performance Management using Enhancement Package 4 in ECC 6.0 in our test system.  We have activiated flexible appraisal process and have completed the necessary config for ESS and MSS and appraisal template.
The MSS user can create the appraisal and define the objectives etc.  The ESS user can view the appraisal but cannot add comments.  On checking the appraisal template we have created a criteria for employee comments and an element called additional comments the tab 'element access' has been marked against the employee as follows:
Participant = Employee
Plan:Access = Change
Review Access = Change
Completed = Display
So we do not know why the ESS user cannot add comments. 
Can anyone help on this issue?
Many thanks
Julie

Many thanks for this - we have checked the template level and have the column access for column 'objectives' (which is what is used at element level for appraisee comments) and if we change the column owner to 'appriaser and appraisee' it works for the appraisee but  not for the appraiser.  So we have a choice either it is set to appraiser and it works fine for the manager or we change it to appraisee and appraiser and it works fine for the ESS user.
Perhaps there is something else we need to check?

Similar Messages

  • Performance Management EHP4 flexible templete

    Hi Experts,
    I have few questions to clarify with forum on implementing Performance Mgt (Integrating with portal) using flexible templete.
    Regards
    Prav

    >
    Donnie Freako wrote:
    > Luke, donu2019t worry. The poster will come back after 30 months saying it has been resolved without providing any further details.
    >
    > Re: Family MemIT21 Issue-Spouse details getting overwritten by Child Info
    come on donnie,
    at least I participate in the fun. 
    Re: 'Next Status' in status overview of Objective settings & Appraisals
    Edited by: Michael L Pappis on Feb 10, 2011 9:28 PM

  • Flexible appraisal processes & predefined Performance Management process.

    Good Night.
    What is the diference between Flexible appraisal processes & predefined Performance Management process and in what case i have that use it?
    Kind Regards-

    Hi Juan,
    Flexible Appraisal Porcess- As the name suggest you have the flexibilty to design your apparisal templates using the functionalities provided by SAP.
    For eample: Using transaction PHAP_Catalog_PA or OOAM, you can design your apparsail template.
    Predefined Appraisal Template: Again as the name suggest, SAP has pre-designed the strucure for defining the appraisal template. After clicking on the tab for Predefined appraisal process in IMG node, you will follow the number of screens in sequece.
    Excellent material is available on SAP Servicemarketplace for Performance Appraisal in EHP4. Please check the link below:
    https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000687484&
    Thanks!
    Best Regards,
    Chetan

  • Predefined appraisal process and flexible appraisal process

    Hello
    I read the new presentation about the New in Performance Management (SAP enhancement package 4
    For SAP ERP 6.0) I don't understand the connection between predefined appraisal process and flexible appraisal process.
    Can I use these 2 processes together?
    Is the new "Predefined Performance Management Process: Calibration"  work with flexible appraisal process  or this is 2 different system and process?
    For example This process of predefined appraisal compare "final appraisal" of workers. Where this "final appraisal"   is stored . In which question of the appraisal form ?
    In the presentation Sap wrote "Team calibration based on overall appraisal". What is "overall appraisal"  in  terms of appraisal form ?

    Hi,
    so to answer your questions:
    Can I use these 2 processes together?
    No these are 2 different functionalities. The reason they were delivered at the same time is because they are using the same technology (web dynpro)
    Thus the 'calibration' which is designed for Predefined does not exist for Flexibe.
    So with EHP4 SAp delivered the new Predefined functionality
    and the Flexible which is basically the same functionality as before but using web dynpro instead of BSP page.
    Regarding "Team calibration based on overall appraisal". This functionality allows manager to compare the individual appraisal documents of the employees that reports to him.
    You can find some more information on these fucntionalities in SAP help link below
    http://help.sap.com/erp2005_ehp_04/helpdata/en/cd/dae8a24ab011d18a0f0000e816ae6e/frameset.htm
    Hope this help
    Sarah

  • Performance Management - Change of appraiser

    In HCM Performance Management EhP4, if the manager changed during appraisal cycle, how do you change the appraisaer in the document. Is this dependent on the status of the document?
    Can you automate the process by developing a custom class?

    Hi,
    Utilization of forum search would have led you to this discussion:
    Re: Appraisals - handle a manager's transfer during the appraisal process
    Credits: SDN members
    Hope this helps.
    Donnie

  • Flexible Appraisal Process Flow EHP-7, Where to start???

    Hi Experts,
    Can anybody please guide me how to go about capturing the Flexible Appraisal Process Flow.
    Where exactly it starts & where it ends, i am not able to visualize the same.
    Shall i start with Templete creation??
    Please guide me a bit on this.

    Hi,
    I guess my document can help you out.
    Objective Setting and Appraisals : Appraisal Template Configuration and it's flexibility using available BADIs
    Regards
    Sounak

  • EHP4 flexible appraisal - How to use one coloum mutiple times

    Dear PMS gurus,
    I have a requirement as follows
    Is there a possibility to use a column many times in a criterion group or criteria. Like,
    There are five objectives created in a criterion group and all the fine objectives have to evaluated as
    1.     Target to be achieved
    2.     Actual target achieved
    For every target we need to have these columns. Is there a possibility we can do that in the standard.
    Also is there a possibility we can have the coloums in horizontal manner instead of the current vertical way the standard gives
    Thanks
    Balaji

    Hi Balaji
    Yes in a flexible appraisal template you can use a column more than once in a criterion group or criterion.
    With regards to layout of Columns , no you cannot have it vertical instead of horizontal (unless you enhance the webdynpro) . If you wish to have it vertical , you can change the layout in the offline download of form which means the users will always have to work in the offline download mode and upload the appraisal doc. Also you need to check if the ADOBE user licenses allows you to change the offline ADOBE form as it  needs ADOBE designer .
    Hope this helps
    Regards
    Urmila Pereira

  • Expand Collapse feature for notes in EHP4 Flexible appraisal Template

    Hi gurus,
    Do we have any solution to add Expand and collapse feature for notes in the flexible appraisal template on the portal. Meaning if the user enters a long note in the Notes feild the expand feature should give a bigger view of the notes feild...
    Please refer to the screenshot below we have the notes feilds which have the scroll feature but cannot be expanded.

    Hi Amrita,
    If your question has been answered or whether the problem is solved, please mark the thread as answered.
    Thank you,
    Liran

  • Performance Management EhP4 Issue 7

    Is there a possibility of doing moderation on a completed (or closed) appraisal document?

    My question means that after appraisal documents have been completed and closed, can a user still change the final score somehow on a document?
    I know of the backend transaction PHAP_ADMIN_PA, but we are still busy configuring the system and I know it's a requirement. In past versions of MBO you could configure a pushbutton to take a document out of the "Completed" status, to do score changes.
    I don't know whether this is possible on EhP4 since it seems that they dropped the pushbutton configuration on the PMP process.

  • Performance Management EhP4 Issue 4

    Can you make changes to the predefined process, and if yes, how do you specify whether the participant may change/score objectives or not?

    Hello,
    HAP_A_PMP_OVERVIEW is the manager entry point for the Predefined Process. HAP_A_TM_CONF and HAP_A_PMP_TIMELINE are used to configure the Predefined Template and Process.
    All notes that correct issues in the Predefined Process are attached to the central PMP note 1239426. We highly recommend that you import those notes, since many other issues in the PMP process. To send the appraisal document to PMP you use the Timeline Configuration.
    Hope it helps,
    Christine

  • EhP4 Flexible Appraisal template HTML errors

    We are reviewing the new Web Dynpro Flexible Appriasal interface in EhP4. When we create a new appraisal from our current appraisal template, the html tags for each criteria (Description - Web Layout) are displayed along with the text on the new WD UI. There is also an error message under each criteria description. If we remove the html and just use the standard Description, the form displays correctly.
    Is there a way/setting to make the WD UI in EhP4 display html?

    Dear Scott,
    I found that it supports XHTML, refer to
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/51f6dce86e14bce10000000a155369/content.htm
    for the tags supported though it is not as rich as HTML.
    Also, please implement SAP Note 1354044 if you are not in NW7.01 SP5.
    Example :
    <h1>
    Hello World
    </h1>
    <br></br>
    <em>This is a test</em>
    <br></br>
    <em>remarks</em>
    Hope it helps a little.
    Regards
    Kir Chern

  • Performance management - change defaiult appraiser

    we have a requirement to change the default appraiser (manager) to another manager based on security profiles that are implemented as custom relationships. we have a custom function module Z_GET_APPROVER that can retrieve the appraisers based on these custom rules. my question is - how do I use this custom function module within the OSA framework?
    how can I change the default appraiser?

    Hi Tiberiu,
    As the previous answer says, you need to make a new implementation of the BADI: HRHAP00_DOC_DEF_D1 (Appraisal Document - Default Appraiser).
    To do that you need an ABAP programmer using the transaction SE19. I recommend to your ABAP programmer to copy the implementation named HRHAP00_DOC_DEF_D101 delivered by SAP and change the code in the method DEFAULT_APPRAISER with your customer logic.
    I hope this can help you too.

  • Push button access - Performance Management EhP4

    Where you do attached the BAdi (HRHAP00_BUT_ACCESS) in the appraisal template. I could not find a place where the Z of the develiered BAdi can be called.

    Hi,
    PHAP_CATALOG(_PA), go to the template->processing tab->Further Template Behaviour (button)->+ button.
    Hope this helps,
    Regards and Groetjes,
    Maurice Hagen

  • Performance Management - Ehp4

    I try to complete appraisal document. When I try to move the document to "Complete" status I keep getting the error
    "Appraisal date is earlier than earliest appraisal date".
    Long text is not available for the error. I do not make any customizing for the date. My customer tester get same error no.
    What is the problem? Please assist me.
    Thank you.

    >
    Tiberiu Sasu wrote:
    > Vishal, were you able to resolve your issue?
    > we are having the same issue, was wondering if you can share your solution with us...
    Hi Tiberiu, this error should come if you have an appraisal document with start period and end period as follows:
    01/01/2011 - 12/31/2011
    Than you try to the move the document to completed as of 12/15/2010, which is before the start date of the document.
    3 options:
    1.  Either fix the start and end dates of the documents so that system date >= start date of document. 
    2.  Wait until system date >= start date of the document 
    3.  At the template config level, processing tab, there is a checkmark "Do not check appraisal date".  Make sure this is checkmarked it should than not do the check.

  • Performance Management EhP4 Issue 2

    We currently cannot open the ESS Iview, it gives an error. (It is logged with SAP now for a month already)
    Any specific note we need to apply?

    We faced the same problem here. I found SAP note: [1416756.|https://service.sap.com/sap/support/notes/1416756]. but is is not very clear about the actions to perform in the 3rd bullet.
    In the PCD you should go to Business Objects --> ERP Common parts --> Human Resources  and double click the object "employee". It will open the business object editor.
    Now go to: Portal Content->Content Provided by SAP->End User Content->Employee Self-Service->ERP 6.0 EHP4->Pages->Career and Job and right click on the page "com.sap.pct.erp.ess.documents_ee" and choose "add page to operation"
    regards,
    J. Damme

Maybe you are looking for