Performance Management Objectives are stored Table?

Hi Friends,
When i click on Add Objective using Performance Management page i.e the SSHR page
I am getting the following fields:
Objective Name
Created By
Start Date
Target Date
Next Review Date
Group (Has a list of departments)
Priority
Weighting Scale
Complete (%)
Achievement Date
I would like to know if these fields are stored in which table immediately.
but after transfer the objects to manager, the manager Review worker changes then PER_OBJECTIVES table populated.
but i want to before which table these objective are stored.
Please help

Hi avajain,
per_performance_tatings fine.
but i want to objective status informantion.
means manager created objective send to employee that time status is WKR, Then employee changes and send to manger that time status APPROVAL like way..
these objective status which table stored.
can u help me any body
thanks and regards
rkrao.

Similar Messages

Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
I didn't notified any errors while registering our counter objects or while running Perfmon.exe
Note: Same counter objects are available and working fine with Windows Server 2008 R2.
for diagnostic our counters on WIN2012, ran command as follows:
cd c:\windows\sysWOW64
lodctr /Q
I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
Appreciate quiclk response with solution or clues to diagnose it more details.
Thanks & Regards,
Sudhakar Rudra

Hi,
Thanks for your reply.
I hope you understood our problem.
same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
and
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
Do you see any issues of registry entries. ?
On what basis perfomance monitor list few enabled counters?
How can we add our counters manually to perfomance monitor?

Exact table where the repository objects are stored

Hi,
In which table the repository objects(Program,FM,Data Element,...) are stored exactly.
I checked in TADIR table, but it's a directory for the repository objects.
Also checked TRDIR.
Say, If I delete a transport request which contains a report thru a 'Z_delete_request' prgm, I can still see the report in SE38.Ofcourse I have deleted in TADIR also.
But presents in repository.
Kindly suggest the exact table name.
Regards,
Siva

Hi,
Use seach option in SDN.
[System table in abap where all the programs/FMs created are stored !]
Regards
Sandipan
Edited by: Sandipan Ghosh on Jan 6, 2009 10:51 AM

Performance Management Objective Setting

Hi Everyone,
I am working on a full HCM implementation and had a few questions regarding performance management. The client is interested in having goals and objectives "cascade" through org. units and pre-load on Performance Appraisal templates.
In the phap_catalog, I have noticed a value determination named "ORG_OBJECTIVES" and it supposedly auto-fills goals set by managers for the performance review period.
Basically, I am looking for a productive/proper way to have goals flow from the overall organization, through lower level organizational units down to each and every employee.
For example: Company X has 3 overall goals -> Bob Smith works within Org. Unit Y in which there are 3 separate goals that refer to this Org. Unit -> and then Bob Smith has the ability to add 3 of his own goals for the year. Overall there would be 3 overall company goals, 3 org. unit goals (total of 6 that pre-fill) and 3 empty fields for Bob Smith to input his own goals.
Any help would be wonderful. Thank you for your time.

Raghu,
Your response was extremely helpful.
Do you have any documentation or guidance on how I could create custom tables to use this BADI that you are talking about. Currently there is no plan for SEM, so I am going to have to take the route of custom tables utilizing the BADI that you mentioned. In terms of custom tables, creating them and using them, I only have a high level knowledge, so any documentation/guidance would be very helpful.
Regards,
Adam P.

How to find the tables were the objects are stored

how to find in which tables the form layout and print program are saved i know for form as tnapr but for other objects i want to know
Moderator message: please (re)search yourself before asking, provide more details when posting again.
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
locked by: Thomas Zloch on Sep 10, 2010 10:55 AM

you gave us not enough information, and your question is unclear as well.
kinda hard to help yah.
besides in table TNAPR there are no forms stored... table TNAPR stores the assigning of the form and driver program and starting routine to an output type.

PCD Audit : What information about the PCD objects are stored in the PCD?

Folks,
Need some information on the information stored in the PCD for audit purposes.
Object = Any PCD object, typically iView, Page, Workset, Role, Group...
1. Creation of any object - Should definately be present in the PCD
2. Any modification including history - List of all actions on any PCD object - I am sure the last modification is tracked, but can we track every change to the object from creation?
3. Deletion of any object? - This I am not sure of - Does the PCD store information about deleted object's like deletion time stamp and the user who deleted etc?
Thank you...

Hi,
>>1. Creation of any object - Should definately be present in the PCD
There is no doubt about this.
>>2. Any modification including history - List of all actions on any PCD object - I am sure the last modification is tracked, but can we track every change to the object from creation?
<b>AND</b>
>>3. Deletion of any object? - This I am not sure of - Does the PCD store information about deleted object's like deletion time stamp and the user who deleted etc?
There is no versioning concept in PCD right now, but ofcourse planned for future.
So you cannot track the history and deleted objects, but there exists PCD Repository Manager in KM on which you can activate versioning. Check if this suites your needs. Never tried but logically ever PCD change should get versioned here.
http://help.sap.com/saphelp_nw70/helpdata/en/76/a8934259a5cc6ae10000000a155106/frameset.htm
Greetings,
Praveen Gudapati

Performance Management/Objective setting and Appraisals - To Hide elements

Hi All,
In PMS/Objective setting and Appraisals module, is there any BADI available to Hide elements( Criteria & Criteria group) on Sub status wise. Meaning, suppose i have Substatus A, B, C & D in status "2" ( In planning) and one of the VC element should be hidden in Status = 2 & substatus = A, B. But in "C" & "D" sub stauts it should be visible.
If BADI is not available then is there any possible way out for the same.
Thanks,
Ashwini.

There is no badi for this, it slipped of radar during the development of the hide element functionality.
The only why to achieve the same would be by having a customer own UI and control it on UI level, but its an ugly way which I do not recommend.
Regards and Groetjes,
Maurice Hagen

Performance management

HI Gurus,
We are working on Performance management we are facing a p[roblem in OPR over all performance rating Can any one help us where can we see the overall performance rating in R/3 like in which table OPR strores
Regards
Renuka

Hello,
The final appraisal (OPR i guess) in an appraisal document is stored in column 'FAPP'.
You can read the value of the cell against column 'FAPP'.
The standard function module like HRHAP_DOCUMENT_GET_DETAIL give you all the data of one appraisal document. You can retrieve your relevant data about final appraisal from there.
One suggestion: Avoid directly hitting database table as you can end up reading invalid value from a process point of view. Use standard module specially if the document is not yet completed.
Thansk&Regards,
Narendra N Shukla

Appraisal template for performance management plan

Hi, I can see my performance management plans in the table per_perf_mgmt_plans. But in this table I can't see the appraisal template that is linked to the plan. Is there any table or view which shows this?
Thanks

Thanks for the answer but I actually would like to see it in a database table. In the per_perf_mgmt_plans table there is no mention of the appraisal template. Is there a table or view I can find this link between the plan and the appraisal template? Thanks

Which table are Demand Management data (MD61) are stored?

Hello guys.
I need to know in which table demand management data from (MD61, 62 and 63) are stored?
Also I need to know if there is some tips/rules to prepare a load from a file to come from Excel spreadsheet?
Is there any BADI or BAPI to load these information directly into the table?
Just for information: My current client doesn't use SAP yet. It's being planned to make the implementation in the middle of the next year...besides they use SAP in other plants around the world...
The main idea is to use MRP from SAP to get the suggestion for purchase requisitions and also planned orders and proceed the production and purchase activities in the legacy....
Please give me some instructions.
Thanks in advance.
Harlen Pinheiro
SAP PP
Brazil

Hello Harlen
This information is stored on tables PBED and PBIM.
You can use BAPI BAPI_REQUIREMENTS_CREATE to load data to demand management.
Please also take a look on the following document before opening this kind of thread:
Landing page for new users in SAP PP - ERP Manufacturing - Production Planning
BR
Caetano

View objects performance issue with oracle seeded tables

While i am writing a view object on a oracle seeded tables like MTL_PARAMETERS, its taking more time to show in the oaf page.I am trying to display all these view object columns in detail disclosure of advanced table. My Application is taking more than two minutes to display the view columns of the query which is returning just 200 rows. Please help me how to improve performance when my query using seeded tables.
This issue is happening only in R12 view object and advanced tables.
Edited by: vlsn on Jun 24, 2012 11:36 PM

Hi All,
Here is architecture of my application:
Java application creates XML from the screen values and then inserts that XML
into a framework(separate DB schema) table . then Java calls a Stored Procedure from same framework DB and in SP we have following steps.
1. It fatches XML from the XML type table and inserts XML into screen specific XML TYPE table in the framework DB Schema. This table has a trigger which parses XML and then inserts XML values into GTT which are created in separate product schemas.
2. it calls Product SP and then in product SP we have business logic. Product SP
does the execution and then inserts response into Response GTT.
3. Response XML is created by using XML generation function and response GTT.
I hope u will understand my architeture this time and now let me know if GTT are good in this scenario or not. also please not that i need data in GTT only during execution and not after that. i dont want to do specific delete which i have to do if i am using normal tables.
Regards,
Vikas Kumar

Table where the UI configuration details are stored

Hi,
I have the GUID information of Transport Request.
Now I want to identify the related COMPONENT NAME / PAGE / ROLE CONFIG KEY / COMPONENT USAGE/ OBJECT TYPE/OBJECT SUBTYPE
Is there is any table where all the UI configuration are stored.pl suggest
Regards
BABU

Though i don't know the excat place but I can suggest you that you do the following
a) Start the st05 trace.
b) launch the bsp_wd_cmpwb
c) Perform the configuration changes.
d) stop the st05 trace.
e) Now if you do the due diligence , then you can find out the name of the table.
Tedious i know but this is the way i know to do the things when i don't know the excat table.
Regards
Kavindra

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

Printing intermediate object (images) stored in an internal table

Hi All,
I'm fetching certain imgaes / documents from a 3rd party repository system (IXOS) and storing the objects in an internal table in a program, later to download them onto the Presentation Server through an ABAP Program.
But instead of downloading these images onto the Presentation Server, i want to directly print them through the ABAP Program on the local printer.
These images are stored in some raw format in the internal table.
Is there any way in which these N images or N raw data sets can be converted into N separate spools so that spools can be converted into N PDFs and then printed?
Or is there any other way in which i can print these N images directly from the ABAP report.
Request your help.
Many thanks in advance,
SG

Not so easy. You can't just take an image in any format directly into a spool, SAP is only able to print TIFFs and BMPs (and not all "sub-formats") into spools.
You first need to know what image formats you have to print, to make sure you're able to process all of these formats.
You may try to use OLE technology to embed the image into a Word document for example, and print this document.

Performance Management Objectives are stored Table?

Similar Messages

Maybe you are looking for