Performance Management - use offline layout on the SAP portal

Hello HR Performance Management experts,
I'm using a ECC6.0 portal, enhancement package version is 2.0.
How can I make the appraisal document appears on the Portal looks like the WORD document?
I'm thinking of using the Adobe form as the UI, which means I need to use the offline layout. ( with the BADI : HRHAP00_OFFLINE01)
But, I don't know whether this can work. And in that adobe form, can I have the funcion of "create" and "delete" objectives, or integrate with the Training management?
Can some one help to give some advices on this?
Thanks and Regards,

Hi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit

Similar Messages

Wht is performance Management and it t-code in SAP Hr

Hi expart ,
can u tell me wht is performance Management and it t-code in SAP Hr
Regards
razz

Hi,
performance mangt is an upcomming part of HCM which involes the process reagarding employee performance calculations in term of final appraisals on certain periods. This allow both the employee and the managers to fill the appraisla documents/templates..
T-code are : APPCREATE and PHAP-*
Regards
lakhan

How to check whether calendar is being used in any of the sap application

Hello All,
We are having few factory calendars. However some of the calendar having valid to year 2010. Can you please let me know how to check whether these calendar is being used in any of the sap application/module
kindly reply as early as possible
Regards
Girish

Hi RKS
yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
/people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
Good work Summer wang !!
Muthu

Import and export MDM with the SAP Portal

Hi,
Would you have any clue on how to handle import and export from the SAP portal ?
I need your help because I haven't found any standard iView to perform these functions
The only information i got were some explanations on WebDynpro Java iViews using events to export from the Portal.
Thank you in advance

Hi,
MDM iViews are only meant to perform MDM Data Manager operations but on limited basis. EP-MDM scenario has been designed for end users only which should not allow to perform complex data manager operations and they need not install MDM Clients.
Thats why importing and exporting functionalities are not possible in standard MDM iviews.
Regards,
Jitesh Talreja

Can we achieve SSO in the SAP Portal without a third party tool

Can we achieve SSO in the SAP Portal without a third party such as Netegrity?

Kirk,
Sorry I misunderstood what you were trying to setup.
If you want to connect the Portal to a Non-SAP Application then I believe that you would need to use a third party tool like Netegrity Siteminder.
We have a portal that is protected by Siteminder and then we have a .NET application that is also protected by Siteminder and SSO is setup between the two since Siteminder is used.
Hope that helps,
Keith

Use only Internet Explorer for SAP portal

Hello,
We have a requirement to use only internet explorer for SAP portal.
When we try to use portal in any other browser, it should display a message saying "This browser is not supported for the application" (or any other message). But purpose is, the portal application should be usable in only one browser i.e Internet Explorer.
If any one have any idea on this, how this can be implemented, then please share the same. I tried to find if there are any standard SAP portal parameters, but haven't come across any.
Regards,
Denish

Hi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit

How to configure GB P60s in the SAP Portal?

How to configure GB P60s in the SAP Portal, so that they can be viewed and printed/reprinted by the employee themeselves? Will HMRC accept P60s printed on any stationeries? Also, Client does not want employee address to be available in the address section, but just the office location.

Hello
Please refer SAP note 1542870 -Electronic P60 ,where HMRC have given employers the option of providing an electronic P60 to their employees.
Please let us know incase you know any further information.
Thanks and Kind Regards
Ramana

TIME on ESS/MSS with the SAP Portal, release ERP2005 ECC6.

Hello,
I need to implement TIME (Leave request) on ESS/MSS with the SAP Portal, release ERP2005 ECC6.
Any informations about the customizing for a proof of concept would be appreciated.
All the back-end (R/3) as allready been customized.
Thanks for your responses.
Olivier

Hello,
If you already have all the templates and such configured then its easy. We don't have ESS and only one MSS scenario. However we support the web environment via BSP HAP_DOCUMENT. You can include our list pages in an Iview and assign that to the ESS or MSS scenario in the portal.
They also run stand alone, so you can test it as well without configuring the portal.
See also <a href="/people/sap.user72/blog/2007/02/20/objective-setting-appraisals-the-web-environment bloggy</a> on OSA and the web Environment, especially the last part will be of interest for you.
Regards and Groetjes,
Maurice

Performance hit using "where" clause in the query

Hi All,
I am facing a huge performance hit in the java code when using "where" clause in queries. Following are the details:
1. SELECT * FROM Employee
2. SELECT * FROM Employee where employeeid in (26,200,330,571,618,945)
There is no difference in Query Execution Time for both queries.
Business Logic Time is huge in second case as compared to first one (ratio - 1:20).
Rows returned are more in first case as compared to second case.(ratio - 1:4)
Business Logic is same for both the cases where I iterate through the ResultSet, get the objects and set them in a data structure.
Does anybody know the reason of unexpected time difference for the business logic in the second case?

Since you're mentioning clustering your index, I'll assume you are using Oracle. Knowing what database you are using makes it a lot easier to suggest things.
Since you are using Oracle, you can get the database to tell you what execution plan it is using for each of the 2 SQL statements, and figure out why they have similar times (if they do).
First, you need to be able to run SQL*Plus; that comes as part of a standard database installation and as part of the Oracle client installation - getting it set up and running is outside the scope of this forum.
Second, you may need your DBA to enable autotracing, if it's not already:
http://asktom.oracle.com/~tkyte/article1/autotrace.html
http://www.samoratech.com/tips/swenableautotrace.htm
Once it's all set up, you can log in to your database using sql*plus, issue "SET AUTOTRACE ON", issue queries and get execution plan information back.
For example:
SQL> set autotrace on
SQL> select count(*) from it.ticket where ticket_number between 10 and 20;
COUNT(*)
        11
Execution Plan
Plan hash value: 2983758974
| Id | Operation         | Name       | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |            |     1 |     4 |     1   (0)| 00:00:01 |
|   1 | SORT AGGREGATE   |            |     1 |     4 |            |          |
|* 2 |   INDEX RANGE SCAN| TICKET_N10 |    12 |    48 |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("TICKET_NUMBER">=10 AND "TICKET_NUMBER"<=20)
Statistics
          0 recursive calls
          0 db block gets
          1 consistent gets
          0 physical reads
          0 redo size
        515 bytes sent via SQL*Net to client
        469 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          1 rows processed
SQL> This tells me that this query used an INDEX RANGE SCAN on index TICKET_N1; the query can't do much better than that logically... In fact, the statistic "1 consistent gets" tells me that Oracle had to examine only one data block to get the answer, also can't do better than that. the statistic, "0 physical reads" tells me that the 1 data block used was already cached in Oracle's memory.
the above is from Oracle 10g; autotrace is available back to at least 8i, but they've been adding information to the output with each release.
If you have questions about sql_plus, check the forums at asktom.oracle.com or http://forums.oracle.com/forums/category.jspa?categoryID=18
since sql*plus is not a JDBC thing...
Oh, and sql*plus can also give you easier access to timing information, with "set timing on".

Changing Expense types in the SAP Portal for Credit Card Receipts

Hi Experts,
We have a situation where we load a credit card file to SAP. The employee will then go review and subsequently send the expense claim to accounting. This is done via the SAP NetWeaver Portal. Quite often the credit card company will send over details to an expense type called 'other' this was created to ensure that the credit card file loads. It is the employee's responsibility to change the expense type from 'other' to the appropriate expense type.
what is desired is to provide the user with an error message in the portal and PR05 that will enforce the user to change the expense type from 'other' to a more appropriate expense type.
How can this be accomplished?

Hello Martin,
You can use a User Exit for this.
In Web Portal, you can use the BADI TRIP_WEB_CHECK on which you can use the method USER_CHECK_LINE_OF_RECEIPTS.
In PR05, you can use the Enhancement name: FITR0003: User Exit: Save Trip (PR01, PR04, PR05, TRIP) - before assigning trip number. It is the User Exit EXIT_SAPMP56T_002.
This will check your receipt before saving.
Regards,
Raynard

Problem in EP while changing the layout of the default portal page

i am working with EP7.in this i encountered a problem when i tried to change the layout of the default framework page.
i created a new layout in NWDS and uploaded it to portal.then i copied the default framework page to separate folder (my personal) and assigned the newly created layout and set that page as my default framework page.
but whenever i log into the portal or refreshes the page the top level navigation iview merges (overlaps) with the masthead iview and comes back to the assigned position after some time.i tried many ways to solve this problem but i couldnt.
if anybody have any idea about it please share.....
regards,
karthick

Hi tamilventhan K
Please have a look at SAP Note No. 687485.
Hopefully this should solve your problem.
Cheers.
Award points for helpful answers:-)

How to create a collaboration room of the SAP Portal from EJB tier.

Hi.
I have created a EJB Stateless Session Beans, and I want to create a room using the API of KM.
I have used the code mentioned in this URL: http://help.sap.com/saphelp_nw04s/helpdata/en/7d/c69c42d706c66ae10000000a155106/content.htm
It works fine it is called from Web Dynpro.
I have added in my application-j2ee-engine.xml of the J2EE Proyect.
<application-j2ee-engine>
     <reference
          reference-type="weak">
          <reference-target
               provider-name="sap.com"
               target-type="library">com.sap.km.application</reference-target>
     </reference>
     <reference
          reference-type="weak">
          <reference-target
               provider-name="sap.com"
               target-type="library">com.sap.netweaver.coll.shared</reference-target>
     </reference>
     <reference
          reference-type="hard">
          <reference-target
               provider-name="sap.com"
               target-type="library">com.sap.security.api.sda</reference-target>
     </reference>
     <provider-name>sap.com</provider-name>
     <fail-over-enable
          mode="disable"/>
</application-j2ee-engine>
It was deployed correctly, but when I tried to call the method the server sent me this exception:
Caused by: javax.ejb.EJBException: nested exception is: com.hocplc.speed.exception.BaseException: com.sapportals.wcm.WcmException: Exception accessing CmSystem: com/sapportals/wcm/crt/CrtClassLoaderRegistry
at com.hocplc.speed.business.ejb.facade.ProcesarSolicitudDocumentoSSBean.crearCuartoColaboracion(ProcesarSolicitudDocumentoSSBean.java:188)
at com.hocplc.speed.business.ejb.facade.ProcesarSolicitudDocumentoSSLocalLocalObjectImpl0_0.crearCuartoColaboracion(ProcesarSolicitudDocumentoSSLocalLocalObjectImpl0_0.java:991)
... 25 more
javax.ejb.EJBException: nested exception is: com.hocplc.speed.exception.BaseException: com.sapportals.wcm.WcmException: Exception accessing CmSystem: com/sapportals/wcm/crt/CrtClassLoaderRegistry
I hope that somebody can help me
Regards in advance.
Manuel Loayza
Living La Vida JAVA

After playing with WebDynPro and PDK - finally I have a simple list showing. This simple example has provided me with a good starting point - it is a pity that SAP do not provide such simple examples to allow you to get your head around the concepts.
I used the SAP NetWeaver Developer Studio to produce a version of my example using a WebDynPro and a JSPDynPage (PDK). Deployed to my EP6 server and then created iVews to show then in the appropriate theme.
My thoughts on this now are that both WebDynPro and PDK have merits - both achieve same end result with various affects. WebDynPro is clunky and PDK is not tighly integrated with the Studio (unlike the .NET one).
To use the PDK you need to understand the TAGs and the SAPDesignGuild website helps - but would be better if the Studio presented a graphical interface much like DreamWeaver does.
SAP's direction seems to be with WebDynPro and no longer PDK - wonder if this is truely the case ?. SAP does have a lot of work to do in my opinion to get both products up to scratch from a useability point of view.

Publishing a Report in the SAP Portal

Hi,
I am able to create a report using Web Application Designer. I am also able to publish it. Once logging into SAP BW, I can see a shortcut of my web report in the SAP Menu. When I click on this report, it redirects me to a site, opening my web browser automatically, and opening a link to my created report.
My question is: Is there a general site wherein I can log in and access my report? I want users to access a single link and choose their reports from there; instead of them logging into SAP BW, and clicking on the shortcut to access the report
My follow up question is: the link to my report appears to be a long link. Can I change the link to my report to make it more easier to memorize for my users?
I am looking forward to your reply experts!
Regards
Ramon

Hi,
If u have an access to the portal u cn directly log on to the portal and there u can executer the reports which are assigned to u.
http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
Hope this information helps u........
Assigning Points is the way of saying Thanks in SDN
Regards
Ramakrishna Kamurthy

Where can I check the SAP Portal version is EP 7.0 or not?

Hi Friends,
Where can I check if my SAP Portal version is EP 7.0.
I tried to look in Component Information: http://<hostname>:portnumber/sap/monitoring/ComponentInfo for this information but cannot track any specific information.
Can you please guide me in identfying the exact component and details associated to look out for,

I'm not looking to download just the update (I've already done that). I want to download the whole thing, in order to make a self-sufficient bootable full reinstallation flash drive for my 2011 MBA.
Yeah, you are supposed to be able to use internet recovery, if the worst happens. But there are even more worse case scenarios for which it is infinitely desireable to have an independent resource, such as a Flash Drive with all the tools one needs. I have this for my 2010 MBA, as the older 11A511 build works fine to create a complete flash boot/reinstall drive.

Performance problems using WLS6.1 with the thin driver for Ora9i from OTN

Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses. It works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

I had done this from the very beginning, but I was still getting very bad performance under
concurrent accesses. I even followed Sree's instructions and removed the old thin driver from
weblogic.jar, but this didn't help. I am now trying to get the OCI driver for 9i running and hope
this will solve the problem.
Samuel
Tamilselvan Ramasamy wrote:
You have to use Oracle's Oracle 9i thin driver .
put this driver infront of the classpath i.e before weblogic_sp.jar and
weblogic.jar
/selvan
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]..
The BEA driver is available in WLS6.1SP2 which is GA.
hth
sree
"Samuel Kounev" <[email protected]> wrote in message
news:[email protected]..
Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under
WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses.
It
works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

Performance Management - use offline layout on the SAP portal

Similar Messages

Maybe you are looking for