Performance management with ONLY ESS and NO MSS??

Hello Gurus,
I have a very peculiar scenario regarding and ESS/MSS.
Let me first post our requirments:
We have implemented all modules of HR along with OM and now in the process of implementing Performance Management along with ESS only . I am stressing on ESS only here with NO MSS functionality.
Now my question is..is it really possible in the first place to have a performance management functionality without MSS and just with standalone ESS? If yes, what are the options that I have to configure the performance management system and the ESS system so that the workflows for Planning, Rating an employee, and Approvals regarding appraisals can be achieved??
Is it possible to assign an ESS role to the manager and then when the manager logs in ESS, he/she can go ahead with the performance management process and can check employees just like the way it happens in MSS?
Thanks a lot for your time.
Best Regards.
Karan.

Dear Karan,
Firstly, it is not mandatory to implement MSS for approvals/notifications...
Manager in MSS term is used to refer Head of Unit (in general) and not the immediate supervisor, i.e, relation ship (012).
UWL - Universal Work List is the place where all work items for approval is listed and this can be activated in ESS with out using MSS functionality also.
Comming to Performance Managment: Yes it can be acheived. NO MSS is required for Appraisals.
if you are using BSP applications, there are different pages available for employee view, and manager view..\
all that u need to do is, use the appropriate pages in the links that you gonna provide in ESS>Performance Management.
SAP has given provision to create your own notifications (workflow) in configurations. Create a Z Event and ask your ABAPer to send a notification based on that Z Event. This all is standard.
Regards
...Sadhu

Similar Messages

HT2494 How do I output video to a projector from my MacPro17 with only firewire and USB ports?

How do I output video to a projector from my MacPro17 with only firewire and USB ports?

No Mac Pro only has Firewire and USB. Perhaps you've misidentified the computer:
http://www.everymac.com/ should help.

Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!

Performance management with ESS and no MSS??

Hello Gurus,
I have a very peculiar scenario regarding and ESS/MSS.
Let me first post our requirments:
We have implemented all modules of HR along with OM and now in the process of implementing Performance Management along with ESS only . I am stressing on ESS only here with NO MSS functionality.
Now my question is..is it really possible in the first place to have a performance management functionality without MSS and just with standalone ESS? If yes, what are the options that I have to configure the performance management system and the ESS system so that the workflows for Planning, Rating an employee, and Approvals regarding appraisals can be achieved??
Is it possible to assign an ESS role to the manager and then when the manager logs in ESS, he/she can go ahead with the performance management process and can check employees just like the way it happens in MSS?
Thanks a lot for your time.
Best Regards.
Karan.

Hi,
In your case check for HR administrator for final ratings and other things also check for r/3 desktop services.
but why they are not going for mss, om is in place right
regards
rafi

Performance problems with DFSN, ABE and SMB

Hello,
We have identified a problem with DFS-Namespace (DFSN), Access Based Enumeration (ABE) and SMB File Service.
Currently we have two Windows Server 2008 R2 servers providing the domain-based DFSN in functional level Windows Server 2008 R2 with activated ABE.
The DFSN servers have the most current hotfixes for DFSN and SMB installed, according to http://support.microsoft.com/kb/968429/en-us and http://support.microsoft.com/kb/2473205/en-us
We have only one AD-site and don't use DFS-Replication.
Servers have 2 Intel X5550 4 Core CPUs and 32 GB Ram.
Network is a LAN.
Our DFSN looks like this:
\\contoso.com\home
   Contains 10.000 Links
   Drive mapping on clients to subfolder \\contoso.com\home\username
\\contoso.com\group
   Contains 2500 Links
   Drive mapping on clients directly to \\contoso.com\group
On \\contoso.com\group we serve different folders for teams, projects and other groups with different access permissions based on AD groups.
We have to use ABE, so that users see only accessible Links (folders)
We encounter sometimes multiple times a day enterprise-wide performance problems for 30 seconds when accessing our Namespaces.
After six weeks of researching and analyzing we were able to identify the exact problem.
Administrators create a new DFS-Link in our Namespace \\contoso.com\group with correct permissions using the following command line:
dfsutil.exe link \\contoso.com\group\project123 \\fileserver1\share\project123
dfsutil.exe property sd grant \\contoso.com\group\project123 CONTOSO\group-project123:RX protect replace
This is done a few times a day.
There is no possibility to create the folder and set the permissions in one step.
DFSN process on our DFSN-servers create the new link and the corresponding folder in C:\DFSRoots.
At this time, we have for example 2000+ clients having an active session to the root of the namespace \\contoso.com\group.
Active session means a Windows Explorer opened to the mapped drive or to any subfolder.
The file server process (Lanmanserver) sends a change notification (SMB-Protocol) to each client with an active session \\contoso.com\group.
All the clients which were getting the notification now start to refresh the folder listing of \\contoso.com\group
This was identified by an network trace on our DFSN-servers and different clients.
Due to ABE the servers have to compute the folder listing for each request.
DFS-Service on the servers doen't respond for propably 30 seconds to any additional requests. CPU usage increases significantly over this period and went back to normal afterwards. On our hardware from about 5% to 50%.
Users can't access all DFS-Namespaces during this time and applications using data from DFS-Namespace stop responding.
Side effect: Windows reports on clients a slow-link detection for \\contoso.com\home, which can be offline available for users (described here for WAN-connections: http://blogs.technet.com/b/askds/archive/2011/12/14/slow-link-with-windows-7-and-dfs-namespaces.aspx)
Problem doesn't occure when creating a link in \\contoso.com\home, because users have only a mapping to subfolders.
Currently, the problem doesn't occure also for \\contoso.com\app, because users usually don't use Windows Explorer accessing this mapping.
Disabling ABE reduces the DFSN freeze time, but doesn't solve the problem.
Problem also occurs with Windows Server 2012 R2 as DFSN-server.
There is a registry key available for clients to avoid the reponse to the change notification (NoRemoteChangeNotify, see http://support.microsoft.com/kb/812669/en-us)
This might fix the problem with DFSN, but results in other problems for the users. For example, they have to press F5 for refreshing every remote directory on change.
Is there a possibility to disable the SMB change notification on server side ?
TIA and regards,
Ralf Gaudes

Hi,
Thanks for posting in Microsoft Technet Forums.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

2 Different SAP systems one with only WM and other no WM system

Hi All,
We are having trouble to implement 2 different SAP systems. In one SAP system only MM & IM will be there. The other SAP system only WM system will be there.
In the SAP system with only MM / IM system all the materials will be valuated where as the SAP system with only WM system, there won't be any valuations. It just serves as a 3PL warehouse for the first SAP system which has only IM environment. Both are acting as a different companies.
We planned to interface all the PO, Inbound Deliveries and also the Sales order and deliveries to WM SAP system and develop a custom program to do PGR / PGI in WM system and then transmit the PGR / PGI details to the SAP system (which has only MM / IM environment). The WM system also uses the RF guns. But not so sure whether this can help.
Can you please help me how to configure the WM system. I will be very grateful for your help.
Regards,
Vansh

Hello,
there is a standard SAP solution: [Decentralized Warehouse Management (LE-IDW) |http://help.sap.com/saphelp_erp60_sp/helpdata/en/51/803c35975f0054e10000009b38f839/content.htm]
for your scenario.
Andrzej

Performance Management - Transporting "Define Tabs and Process config"

Good Morning Experts,
We are moving from Development into our PPT (pre-production test) environment and have successfully transported the Performance management category settings/values, as well as the Template itself.
Upon executing the Performance Management toolset from the portal side, I see that my tab configuration for the template did not transport. I have searched high and low for any reference to transporting this config step, but have been unsuccessful, thus this post.
Does anyone have any suggestions for transporting this configuration. As you know the IMG Personnel Management > Personnel Development > Objective Setting and Appraisals > Define Tabs and Process Configuration for Template launches a webdynpro app to make this configuration step, so saving these setup selections is the only option. How can I force these changes across ? I look forward to your responses !
Chris Thomas
Duke University and Health System

All - the solution:
SAP Note 1428054, implement the corrections according to the note.
Run the report, RHHAP_Transport_tab_config which will generate the transport containing entries from tables:
hrhap_tab
hrhap_tab_data
hrhap_tab_t
Basis implemented, I ran report, transported the tabs and and all is well.
Chris

Replacimg performance Manager with SSM(SAP Strategy management)

Hi,
Can any body tell me how to migrate all the scorecards, KPIs based on Performance Manager to SAP Strategy Management. Is there is a tool for that in SSM if not should those be rebuilt in SSM from the scratch.
how do we replicate everything fromPM to SSM
From the developer perspective what will their tasks.
Edited by: chrisbaker1999 on Jun 16, 2011 1:01 PM

Chris,
What the External Data Loader does is to allow you to transfer your scorecard structure from Performance Manager to Strategy Management. What you are importing is the structure of Contexts, Perspectives, Objectives and KPI aspects. It allows you to put all of these in the loader, verify the structure in the loader, and then using Transport to bring into SSM.
There are additional definitions and settings that SSM requires that will have to be added after you Transport the loader's data.
You will still have to build PAS models separately, because the External Data Loader does not build models.
The Transporter tool in SSM allows you to export (and then import) your scorecard metadata from DEV to PROD. Moving between systems is a two-step process, and Transporter is step one. PAS is separate (step two) and you make a dump of the model in your DEV system, take that dump file from the Home directory in DEV and move it to the Home directory in PROD. In the PROD system you create a new PAS model frame and then load that dump into the new framework.
Each SAP customer has a super-administrator that can add users to the SAP Service Marketplace. Find out who your super-admin is and get yourself added to allow you access to those areas on Service Marketplace.
Regards,
Bob

Performance problems with EP 6 and MS IE

Hi everybody,
since a couple of days, we are facing a sever performance problem with our SAP EP 6.0. When I access the system with MS Internet Explorer 6.0, it takes 5-10 minutes after the Login. With Firefox Browser, the performance is ok. Therefore I assume that it must be a problem with the IE settings. Does anybody know a solution?
Best regards,
Michael

There are a few things that this could be. I've seen the setting "Empty Temporary Internet Files folder when browser is closed" cause a lot of performance problems (This is in the advanced settings in your IE).
This will cause your cache to be cleared out each time the browser is closed and cause a lot more data to be downloaded each time you login to the system.
For more analysis I'd recommend putting a tool like HTTPWatch into your IE browser and seeing which requests are using the most time.

Migration manager with Adobe CS2 and Microsoft Office 2004

I had already downloaded my academic copy of office 2008 as soon as I opened the computer. To my total aggravation, it too had the stupid ribbon format that office 2007 has on the pc version. Then to my total surprise when I used the migration manager, it moved all my old programs over from my macbook running 10.4.11. This included office 2004. It seems to operate just fine, but am worried about when I end up opening documents from an email or something that it will end up opening in 2008 instead. Also, when it moved my Adobe CS2 it said some type of error message about color matching. That seems to be the case in the color sliders at least, the colors don't look right, but the images seem fine when they open. Any suggestions on what to do? Thanks!

am worried about when I end up opening documents from an email or something that it will end up opening in 2008 instead.
Find a document you would normally open with Office 2004, and use the menu in the Finder to 'Get Info'.
In that window, you have an option to dictate which program to always open that file type with, and to apply that choice to all similar files.
Make the change and close that window.

Can I use Oracle BPEL process manager with other AS and DB

Can we user oracle bpel process manager with jboss application server and postgresql database.. is it possible..
and what will be the price.. per licencse when i go to just purchase Oracle BPEL process manager

MAke sure you have not set ANY environment variable related to Oracle / BEA / Java / LD_library path. Use the following script to unset / set the initial settings:
#!/bin/sh
unset ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_TERM
unset LD_LIBRARY_PATH LD_LIBRARY_PATH_64
unset CLASSPATH JAVA_HOME
export PATH=.:/usr/sbin:/usr/bin:/usr/local/bin:/opt/VRTS/bin
export BEA_HOME=/appl/oracle/products/9.2/weblogic
Marc
http://orasoa.blogspot.com

How can I mirror my macbook pro desktop through Airport Extreme to a digital projector with only VGA and DVI inputs?

How can I mirror my Macbook Pro desktop through Airport Extreme to a digital projector with only a DVI & VGA inputs?? Want to use it for presantation like Keynote/ Pages.

Never mind, I solved it. Didn't know the converter needed a power source to operate (duh!) Now I have that, it works just fine.......

Performance issue with high CPU and IO

Hi guys,
I am encountering huge user response time on a production system and I don’t know how to solve it.
Doing some extra tests and using the instrumentation that we have in the code we concluded that the DB is the bottleneck.
We generated some AWR reports and noticed the CPU was in top wait events. Also noticed that in a random manner some simple sql take a long time to execute. We activated the sql trace on the system and noticed that for very simple SQLs (unique index access on one table) we have huge exec times. 9s
In the trace file the huge time we had it in fetch area: 9.1s cpu and elapsed 9.2.
And no or very small waits for this specific SQL.
it seems like the bottle neck is on the CPU but at that point there were very few processes running on the DB. Why can we have such a big cpu wait on a simple select? This is a machine with 128 cores. We have quicker responses on machines smaller/busier than this.
We noticed that we had a huge db_cache_size (12G) and after we scale it down we noticed some improvements but not enough. How can I prove that there is a link between high CPU and big cache_size? (there was not wait involved in SQL execution). what can we do in the case we need big DB cache size?
The second issue is that I tried to execute an sql on a big table (FTS on a big table. no join). Again on that smaller machine it runs in 30 seconds and on this machine it runs in 1038 seconds.
Also generated a trace for this SQL on the problematic machine:
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        1    402.08    1038.31    1842916    6174343          0           1
total        3    402.08    1038.32    1842916    6174343          0           1
db file sequential read                     12419        0.21         40.02
i/o slave wait                             135475        0.51        613.03
db file scattered read                     135475        0.52        675.15
log file switch completion                      5        0.06          0.18
latch: In memory undo latch                     6        0.00          0.00
latch: object queue header operation            1        0.00          0.00
********************************************************************************The high CPU is present here also but here I have huge wait on db file scattered read.
Looking at the session with the select the AWG_wait for db scattered read was 0.5. on the other machine it is like 0.07.
I though this is an IO issue. I did some IO tests at SO level and it seems like the read and writes operation are very fast…much faster than the machine that has the awg_wait smaller. Why the difference in waits?
One difference between these two DBs is that the problem one has the db block size = 16k and the other one has 8k.
I received some reports done at OS level on CPU and IO usage on the problematic machine (in normal operations). It seems like the CPU is very used and the IO stays very low.
On the other machine, the smaller and the faster one, it is other way around.
What is the problem here? How can I test further? Can I link the high CPU to low/slow IO?
we have 10G on sun os with ASM.
Thanks in advance.

Yes, there are many things you can and should do to isolate this. But first check MOS Poor Performance With Oracle9i and 10g Releases When Using Dynamic Intimate Shared Memory (DISM) [ID 1018855.1] isn't messing you up to start.
Also, be sure and post exact patch levels for both Oracle and OS.
Be sure and check all your I/O settings and see what MOS has to say about those.
Are you using ASSM? See Long running update
Since it got a little better with shrinking the SGA size, that might indicate (wild speculation here, something like) one of the problems is simply too much thrashing within the SGA, as oracle decides "small" objects being full scanned in memory is faster than range scans (or whatever) from disk, overloading the cpu, not allowing the cpu to ask for other full scans from I/O. Possibly made worse by row level locking, or some other app issue that just does too much cpu.
You probably have more than one thing wrong. High fetch count might mean you need to adjust the array size on the clients.
Now that that is all out of the way, if you still haven't found the problem, go through http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Edit: Oh, see Solaris 10 memory management conflicts with Automatic PGA Memory Management [ID 460424.1] too.
Edited by: jgarry on Nov 15, 2011 1:45 PM

Performance issue with select query and for all entries.

hi,
i have a report to be performance tuned.
the database table has around 20 million entries and 25 fields.
so, the report fetches the distinct values of two fields using one select query.
so, the first select query fetches around 150 entries from the table for 2 fields.
then it applies some logic and eliminates some entries and makes entries around 80-90...
and then it again applies the select query on the same table using for all entries applied on the internal table with 80-90 entries...
in short,
it accesses the same database table twice.
so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
is around 80-90 entries too much for using "for all entries"?
the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
i really cant find the way out...
please help.

chinmay kulkarni wrote:Chinmay,
Even though you tried to ask the question with detailed explanation, unfortunately it is still not clear.
It is perfectly fine to access the same database twice. If that is working for you, I don't think there is any need to change the logic. As Rob mentioned, 80 or 8000 records is not a problem in "for all entries" clause.
>
> so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
>
It is not clear what you tried to do here. Did you try to bring all 20 million records into an internal table? That will certainly cause the program to short dump with memory shortage.
> the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
>
That is fine. Actually, it is better (performance wise) to do much of the work in ABAP than writing a complex WHERE clause that might bog down the database.

Performance problems with external sounds and Sound class

I'm using Sound & SoundChannel classes to load and play external MP3s and I'm seeing terrible playback performance on my 3G phone. Audio starts out ok, but will gradually get more and more choppy and eventually crashes the app. The MP3s themselves are typical sizes, 2 - 6 MB and of various types (VBR, CBR).
On top of that, when the phone gets locked (with the app still running), the audio sputters and stops completely. When I unlock, it begins where it left off. Anyone else seeing this?
My code is pretty standard:
private var soundPlayer:Sound;
private var soundChannel:SoundChannel;
public function load(url:String, playNow:Boolean = true):void {
if (soundChannel) {
    soundChannel.stop();
soundPlayer = new Sound();
soundPlayer.addEventListener(IOErrorEvent.IO_ERROR, onIOError);
soundPlayer.addEventListener(ProgressEvent.PROGRESS, onProgress);
soundPlayer.addEventListener(Event.ID3, onID3);
trace('Loading new stream: '+url);
var request:URLRequest = new URLRequest(url);
soundPlayer.load(request);
if (playNow) {
    this.isPlaying = true;
    soundChannel = soundPlayer.play();
    soundChannel.addEventListener(Event.SOUND_COMPLETE, onSoundComplete);

this is from another forum (http://discussions.info.apple.com/thread.jspa?threadID=2542931&tstart=0&messageID=12106188 ):
"I've spoken to the developers of of couple of these apps, and they've all said it's a memory fragmentation/low memory condition.
Restart the phone. Don't just turn it off and on, but restart it.
Hold the on/off button and the home button down like you were going to turn it off. When you see the swipe to turn off message, keep holding the buttons down.
In a few seconds the screen will flash, and then go dark.
Now it's really off.
Turn it back on (restarting it). All should be well.
The iPhone is really a computer. Performing a restart like this every once in a while (weekly, bi-weekly) is a good idea, esp if you use memory intensive apps."
coop

Performance management with ONLY ESS and NO MSS??

Similar Messages

Maybe you are looking for