Performance Memory Test

Windows 7 U. - 32 Bit vs 64 Bit Performance scores: wondering why Memory test is so much lower on same computer 32Bit vs. 64Bit
Windows 7 Ultimate 32Bit
Component Details                                                        Score
Processor Intel(R) Xeon(R) CPU E5462 @ 2.80GHz            7.7
Memory (RAM)                                                 4.00 GB   5.5
Graphics                        ATI Radeon HD 4800 Series       6.8
Gaming      1275 MB Total available graphics memory       6.8
Primary hard disk                   31GB Free (69GB Total)    5.7
System
Manufacturer Apple Inc.
Model MacPro3,1
Total amount of system memory 4.00 GB RAM
System type 32-bit operating system
Number of processor cores 8
64-bit capable Yes
Graphics
Display adapter type ATI Radeon HD 4800 Series
Total available graphics memory             1275 MB
        Dedicated graphics memory               512 MB
        Dedicated system memory                     0 MB
        Shared system memory                     763 MB
Display adapter driver version           8.632.1.2000
Primary monitor resolution                       1152x864
DirectX version DirectX                            10
Windows 7 Ultimate 64Bit
Component Details                                                                 Score
Processor Intel(R) Xeon(R) CPU E5462 @ 2.80GHz                   7.7
Memory (RAM) 4.00 GB                                                           7.7
Graphics ATI Radeon HD 4800 Series                                         6.8
Gaming graphics 2299 MB Total available graphics memory         6.8
Primary hard disk 37GB Free (59GB Total)                                 5.7
System
Manufacturer Apple Inc.
Model MacPro3,1
Total amount of system memory 4.00 GB RAM
System type 64-bit operating system
Number of processor cores 8
Graphics
Display adapter type ATI Radeon HD 4800 Series
Total available graphics memory          2299 MB
        Dedicated graphics memory            512 MB
        Dedicated system memory                  0 MB
        Shared system memory                 1787 MB
Display adapter driver version              8.650.0.0
Primary monitor resolution                  1152x864
DirectX version DirectX                       10

Windows 7 U. - 32 Bit vs 64 Bit Performance scores: wondering why Memory test is so much lower on same computer 32Bit vs. 64Bit
Windows 7 Ultimate 32Bit
Component Details
Score
Processor Intel(R) Xeon(R) CPU E5462 @ 2.80GHz            7.7
Memory (RAM)
4.00 GB   5.5
Graphics                        ATI Radeon HD 4800 Series       6.8
Gaming      1275 MB Total available graphics memory       6.8
Primary hard disk                   31GB Free (69GB Total)    5.7
System
Manufacturer Apple Inc.
Model MacPro3,1
Total amount of system memory 4.00 GB RAM
System type 32-bit operating system
Number of processor cores 8
64-bit capable Yes
Graphics
Display adapter type ATI Radeon HD 4800 Series
Total available graphics memory             1275 MB
        Dedicated graphics memory               512 MB
        Dedicated system memory                     0 MB
        Shared system memory                     763 MB
Display adapter driver version           8.632.1.2000
Primary monitor resolution                       1152x864
DirectX version DirectX                            10
Windows 7 Ultimate 64Bit
Component Details
Score
Processor Intel(R) Xeon(R) CPU E5462 @ 2.80GHz                   7.7
Memory (RAM) 4.00 GB
7.7
Graphics ATI Radeon HD 4800 Series
  6.8
Gaming graphics 2299 MB Total available graphics memory         6.8
Primary hard disk 37GB Free (59GB Total)                                 5.7
System
Manufacturer Apple Inc.
Model MacPro3,1
Total amount of system memory 4.00 GB RAM
System type 64-bit operating system
Number of processor cores 8
Graphics
Display adapter type ATI Radeon HD 4800 Series
Total available graphics memory          2299 MB
        Dedicated graphics memory            512 MB
        Dedicated system memory                  0 MB
        Shared system memory                 1787 MB
Display adapter driver version              8.650.0.0
Primary monitor resolution                  1152x864
DirectX version DirectX                       10

Similar Messages

How can I perform system memory test

I am working on Labview 7.1. Is Are there any canned vi's that allows me to do basic memory tests as part of my application?

There are no "canned" / "shrink wrapped" memory tests.
There are many varieties of memory tests. Can you describe what you are trying to do?
Is it for a target device? A PC?
What does the memory test consist of? walking 1's & 0's? To what extent do you want to test? How large is the memory?
You need to describe the specs on the memory test that you need to implement.
R

865PE NEO2 FSIR fails memory tests

This is the second MB that I've had this problem with, so something is causing them to fail. Here's the story:
New install, 865PE Neo2 FSIR + P4 2.6GHz 800MHz FSB, 2 x Crucial PC3200 256MB DDR, everything seems ok, XP installs with no problems.
About a month down the road I'm plagued by sudden reboots, Microsoft Error Reporting says RAM, says to DL and run it's DOS memory check utility. I get the utility, create bootable CD and run the utility, computer fails all RAM checks. I pull each RAM stick in turn and re-run the check with each stick separately, still fails all tests. Shortly after this, the board refuses to POST. Ship the board back to New Egg for replacement.
Installed replacement MB with 4 x 256MB Crucial PC3200, Microsoft DOS memory check program passes, no problems. About 2 weeks later I run into minor instability so I run the same memory check again, the board fails all tests????? I pull all Crucial memory sticks and put in a test stick of Corsair XMS 3200; same result, failure of all memory tests.
At this point, WinXP still runs, but this is the same pattern that the other board showed, right until it quit altogether.
It occurs to me that I DID flash BIOS to 1.9 between the time I first tested the RAM and got a pass and the time I tested and got a failure, could this be a coincidence? I can't remember if I updated the BIOS on the first board or not, so this may mean nothing.
System Specs:
MSI 865PE NEO2 FSIR
P4 2.6GHz, 800MHz FSB (all defaults, no overclock, Vantec HS)
Crucial CT3264Z40B.8T PC3200, CL3 256MB (2 Modules)
Crucial CT3264Z40B.8T2 PC 3200, CL3 256MB (2 Modules)
(Tested with same results with single Corsair CMX512-3200C2PT 512MB)
Antex True Power 430W PS
ATI Radeon 9600 Pro
All PCI slots open
Seagate 120GB System drive, 7,200RPM primary master
IBM 30GB drive, 7,200RPM primary slave
LiteOn DVD ROM secondary master
Sony CDRW secondary slave
2 x IBM 30GB drives on Promise PATA.
I know I'm probably gonna have to RMA this board, but I'd really like to know what is causing this so I can avoid it next time.
If anyone has any ideas I'd sure appreciate it.
Scott

Quote
Originally posted by jwspicer
As they say - been there, done that. Always flash using DOS, and always keep backup, so I went back to the original BIOS for the board. No luck. Apparently once the screwup is done - it stays that way.
--BUT--
Suspect it is the reallocation for the P4 EE that is the issue. Reason is that Memtest86 has been running on that box for 9 hours now with NO error. However, it also shows only 104K of reserved memory. My other 865 board with onboard RAID (an ASUS P4P800 Deluxe) shows 687K reserved. So either the ASUS is wasting a lot of space, or the MIS is no longer correctly indicating the amount of memory reserved by the BIOS (including the Promise BIOS) at startup. Then Microsoft's utility is not correctly scanning. But Memtest, which probes for the "correct" setting, is. (The Memtest86 version is 3.0, and the test was done with the Promise enabled and drives attached (so the BIOS loads) and all the other setup was as it would be normally (standard IBOS options, etc.)
So who's right? And if MS' tool has the problem, does that indicate Windows XP reads memory the same way? Hmmm...
Hmm, I haven't tried reverting BIOS, but I'm typing this on the affected machine (which Memtest 86 says is fine) with only the two RAM chips it likes and so far no problems; I've run PCMark4 and 3DMark4 benchmarks all night and no problems, it was still happily churning away on 3DMark this morning. I guess either one of the Crucial sticks it doesn't like is bad or Crucial changed something in a revision to the chips it doesn't like.
Just a FYI, the Crucial sticks it DOESN'T like are CT3264Z40B.8T2
The sticks it DOES like (at slow or fast performance, forget about turbo or ultra turbo) are CT3264Z40B.8T
Both pairs are PC3200, CL3, 256MB DIMM's, single sided.
I think you're right about Microsoft's RAM tester being buggy, I can't believe ANYTHING could run if the RAM was actually giving the errors it shows, EVERY test shows things like "expected result 11111111 actual result ff1e0001" The Microsoft tester does run fine on the other 5 computers here; a mix of laptops and desktops; none using this board. It also ran on this board when it was installed, I guess the BIOS upgrade must be the cause.
Scott

MacBook Pro 2,2 won't pass memory test at boot

Hi Apple and Mac folks,
I have a MacBook Pro 2,2 15", 2007 year model, equipped with 2,16 GHz Intel Core 2 Duo and 2 GB 667 Mhz factory-installed DDR2 SDRAM, running Mac OS X 10.4.11. SMC version is 1.12f5.
Three months ago, when I was installing the Safari beta and the installation requested a reboot, the machine wouldn't start at all. It didn't give me any startup chime; the only thing to be heard was the initial movement from the DVD scanning mechanism (?), but after that nothing happened. If I waited for a while I could assume that the CPU was working, since I could hear the fans spinning up. But the screen was black and the computer wouldn't load any CDs or DVDs or even listen to any keyboard commands. The only thing that was working was the force shutdown by the 10-second press on the start button.
After some trial and error I realized that the system would reboot without problems if I let it rest (cool down?) for about 15 minutes. Sometimes, connecting an external hard drive via FireWire would also help the system to start up, bit it seemed to work rather randomly.
I ran the Apple hardware test and it reported an error on one of the SDRAM modules the first time I checked, but running the more thorough test wouldn't report any error and the system didn't show any signs of errors whatsoever once it was up and running.
I have also tried to reset PRAM and SMC, but it does not alleviate the reboot problem.
Since I then suspected that I had a faulty memory module I decided to upgrade the system with 2 Kingston DDR2 2GB SODIMM modules (yes, I know it only supports 3GB of memory, but I wanted the modules to work in pair). Unfortunately, the system exhibits the same problems with the new modules, and now things are getting even worse - now the 15-minute cool down period does not seem to be sufficient to get the system to pass (as I suspect) the initial memory test.
Last night I had to fiddle around, switching memory modules around in the slots to get the system restarted. I could get it rebooted once with one of the older 1 GB modules in the upper slot, and once it rebooted with an older module in the lower slot. Things seemed to act quite randomly and the previous cooling period method didn't seem to make any difference. Finally, I sort of gave up and put back the two new 2 GB modules and tried a last restart while having an external hard drive attached via FireWire and then it gave me the chime and restarted!
My interpretation of the problem is that the system has some kind of glitch (maybe not the correct term for a small gap in the circuits?) in the circuits connecting one or both of the SODIMM modules and that this glitching is getting worse as the system grows older.
So, I have three questions to you:
1. Is there any way to turn off or circumvent the initial memory check, so that I can temporarily live with this problem and not risk having an unusable system at next reboot?
2. Have you heard about this kind of problem before and maybe have knowledge about what part of the system that would have to be replaced and what it will cost me if I bring the computer to a service station (I'm located in Sweden).
3. Are there any SMC or EFI updates I should try before going to service?
Thanks for any help on this,
Ulf

cornelius wrote:
The firewire bridge is the most likely component in a FW HDD to fail. I have seen it a few times, and all that was needed was to remove the drive from the case and place it in a new firewire enclosure. I insist on getting an enclosure with an Oxford chipset, as they are the most reliable.
Hi again Cornelius,
first of all, thanks for the support in the struggle troubleshooting this issue.
Secondly, I don't think the problems has to do with the cabinet of the externa FW drive, but rather the problem would be located in the FW port in the computer.
Doing some research today, I found indications on that the AHT actually is installed on the hard drive of MacBooks after 2007. So, I decided to see if I could launch the AHT from my internal hard drive. Reboot needed, so hold your thumbs...
Reboot. Dead computer. Attached firewire disc. Dead computer. Let computer rest and cool down for half an hour. Restart -> dead computer. Connected firewire drive -> chime and boot!
Pressed D to load ATH. System gave me a dimmed screen with a text box telling me that I had to reboot the computer. I gave OK to that and the computer restarted normally, but reported an abnormal shutdown and gave me the opportunity to send a report about a kernel panic to Apple.
When the system came up the attached FW disc was not reachable. Looking in the system log, I find the following error message repeated:
Jun 26 16:24:49 Ulf-Kronman kernel[0]: FireWire GUID ffffffffffffffff is invalid!
The research on the net is getting me more and more confused: Is the ATH really located on the hard drive of MacBooks? Is the Power On Self Test really run at reboot? According to this wikipedia note (http://en.wikipedia.org/wiki/Power-on_self-test) the test is not run at reebot:
" Apple's Macintosh computers also perform a POST after a cold boot. In the event of a fatal error, the Mac will not make its startup chime. "
But my problems occur both when I cold start and when I reboot.
Isn't a lack of chime a very un-Apple-like way of reporting an error? Where/how can I get some more information about what's going on before the chime? And how do I know if the Self Test is run or not? System profiler only reports that self-test at start hasn't found any errors, but only when the system starts (due to that it not has found any errors )
Somewhere I saw instructions for doing a
Terminal> sudo nvram boot-args="-x -v"
to get a report of whats going on during startup. Could that be a way to proceed or is there a leaner way to get info out of the self test?
I'll continue to some research on the FireWire GUID, whatever that is.
Regards,
Ulf

HP Pavilion g6-2330dx. "No Boot Device. Insert boot disk and press any key" Memory test failed

Hi. So I am trying to help a friend with her laptop. It's a HP Pavilion g6-2330dx.
Product #: D1C01UA#ABA
Serial #: [Personal Information Removed]
Windows 8
ADATA 4GB RAM
Toshiba 640GB HDD from the looks of it.
The laptop is unable to boot into Windows, so I suspect the hard drive. But I ran the hard drive test and it passed all the tests. The SMART test and both the short and long test. I ran the tests multiple times and it passed each time. I tried reseating the hard drive and still no go. I also removed the HDD and connected it to my desktop PC to see if it detects and it did. Ran the Windows 7 own HDD test and it passed.
Currently, there doesnt seem to be any operating system at all on the HDD. When I check, there is a C: drive of ~90GB partition that is ~90GB free, but inside there are Windows files/folders. There is also a D: drive Recovery partition that says ~26GB with only ~2GB free, but when I go inside there's only ~350MB worth of data.
So then I ran the memory test (in BIOS) and it failed immediately. I reseated the RAM module. I tried the other slot. It still failed. So is it safe to say the memory is the cause of this problem?
Pressing the F11 key that is supposed to take me to the System Recovery only leads me back to the black screen with "No Boot Device. Insert boot disk and press any key"
I even tried to install Windows 7 to see if it'll work. I was able to get the laptop to boot/read off the Windows 7. But when I click to install, it asks for a boot device driver or something like that.
My friend doesn't have the recovery disk either. I guess she lost it.
Anyway, is it as simple as replacing the memory or could it actually be the HDD (even though it passes)?
EDIT: This is what the System Log in BIOS says
0021           Time: 10/13/2014
03F0           Time: 10/13/2014
03F0           Time: 10/13/2014
The date was the first time I ran the tests. I havent received those numbers (error codes?) since.
EDIT: Just for kicks, I ran Memtest 2.11 just now (forgot I had the disc) and it immediately went red with thousands of errors, hah.

Hi bghs,
Welcome to the HP Forums!
It is a fantastic place to find answers and information.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you were unable to boot into Windows, and you suspected the hard drive and tested it, but it passed both short and long test. With that being said and the fact that it also passed leads me to believe the hard drive is fine.
You tested the memory and it failed. You tried reseating and swapping slots but they still failed the test.
I would test each card individual with the memtest to determine if it is just one or both cards that have an issue.
When you installed it in another computer, you did see the recovery partition. Once the memory issue is resolved, if you are still unable to boot into Windows, I suggest you do a recovery with the minimized image.   Here is a link to Performing an HP System Recovery (Windows 8) to assist you with that process.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HP Pavilion g6: Memory test fail id - U0E17L-5SV7NP-MFGH4K-406W03

Hi,I have a HP Pavilion g6 Notebook (Prodect id - QC399AV).The laptop is not booting and, I get a message "Windows failed to start. A rececnt hardware or software might be the cause" On doing a memory test, I get following failure id - U0E17L-5SV7NP-MFGH4K-406W03. The Hard disk test had passed. Can any on let me know what this error means, and how i can fix this. Do let me know if this is related to Operating system, and if i have to reinstall them. I am not able to do a factory reset (as Laptop does not boot), let me know how i can get the operating system image in DVD/USB. Thanks,Sujesh Prasannan

Hi,
Your notebook is listed as coming with a 500Gb ( 5400rpm ) Hard Drive, but you may as well replace this with a 500Gb ( 7200rpm ) HDD as there's no real difference in cost and it'll give you a bit more performance - the drive on the following link is an example that would be fine for your notebook.
500Gb Hard Drive
The procedure to replace the Hard Drive starts on Page 53 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive - this procedure is described in the HP document Here.
If you don't have your Recovery Discs, you can order a replacement set using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regarding the battery, my best advice would be to replace the HDD first and get everything up and running - you can then use the utility on the following link to see if there's any issue with your current battery.
http://h20239.www2.hp.com/techcenter/battery/battery_ts.htm
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

XBench Results - Memory Test Only Request

I upgraded to gigaram 2x1GB and want to see if the memory performance is different. Theoretically anyone that has a Solo should get the same throughput results with 512 as they would with 1GB or 2GB from Apple as they are all in matched pairs. Not sure what XBench really spits out but it's a start. I am trying to see what matched pair performance gets you vs. unmatched. There are lots of claims out there of "significant" differences and I agree that there would be but I want some tests run. Can you run Xbench:
http://www.xbench.com/
and just run the memory test and post results here:
Thanks,
-Seed
I'll post mine in a separate post.

Now that I figured out how to extract more data from the database:
Core Solo
Physical RAM 512 MB
Model Macmini1,1
Memory Test 90.81
System 89.09
Allocate 86.34 317.06 Kalloc/sec
Fill 86.01 4182.20 MB/sec
Copy 95.54 1973.33 MB/sec
Stream 92.60
Copy 77.24 1595.38 MB/sec
Scale 76.20 1574.35 MB/sec
Add 117.97 2512.94 MB/sec
Triad 115.57 2472.42 MB/sec
Core Duo
Physical RAM 2048 MB
Model Macmini1,1
Memory Test 104.17
System 105.21
Allocate 113.82 417.98 Kalloc/sec
Fill 94.98 4618.23 MB/sec
Copy 108.70 2245.10 MB/sec
Stream 103.14
Copy 86.49 1786.50 MB/sec
Scale 85.33 1762.80 MB/sec
Add 130.67 2783.60 MB/sec
Triad 127.42 2725.86 MB/sec
Physical RAM 1024 MB
Model Macmini1,1
Memory Test 97.28
System 95.39
Allocate 93.48 343.28 Kalloc/sec
Fill 93.93 4567.09 MB/sec
Copy 98.96 2043.95 MB/sec
Stream 99.25
Copy 82.63 1706.76 MB/sec
Scale 84.12 1737.81 MB/sec
Add 124.09 2643.30 MB/sec
Triad 121.19 2592.61 MB/sec
2GB Core Solo
Physical RAM 2048 MB
Model Macmini1,1
Memory Test 98.21
System 95.52
Allocate 94.48 346.97 Kalloc/sec
Fill 89.98 4375.19 MB/sec
Copy 102.97 2126.87 MB/sec
Stream 101.06
Copy 84.26 1740.44 MB/sec
Scale 83.23 1719.51 MB/sec
Add 129.35 2755.45 MB/sec
Triad 125.52 2685.18 MB/sec
Duo Mini with stock RAM
Physical RAM 512 MB
Model Macmini1,1
Memory Test 93.20
System 94.85
Allocate 100.58 369.38 Kalloc/sec
Fill 93.47 4544.72 MB/sec
Copy 91.00 1879.53 MB/sec
Stream 91.60
Copy 78.27 1616.73 MB/sec
Scale 76.72 1584.94 MB/sec
Add 112.70 2400.72 MB/sec
Triad 111.32 2381.32 MB/sec
Here is one with asymmetric RAM:
"Feri’s Mac mini"
Physical RAM 1280 MB
Model Macmini1,1
Memory Test 91.02
System 97.47
Allocate 102.16 375.18 Kalloc/sec
Fill 94.20 4580.02 MB/sec
Copy 96.40 1991.16 MB/sec
Stream 85.36
Copy 74.08 1530.07 MB/sec
Scale 73.37 1515.87 MB/sec
Add 101.27 2157.19 MB/sec
Triad 101.45 2170.17 MB/sec
Possibly 3rd party:
Physical RAM 2048 MB
Model Macmini1,1
Memory Test 98.44
System 96.96
Allocate 93.07 341.77 Kalloc/sec
Fill 95.06 4622.03 MB/sec
Copy 103.34 2134.36 MB/sec
Stream 99.97
Copy 82.76 1709.32 MB/sec
Scale 82.35 1701.31 MB/sec
Add 128.01 2726.82 MB/sec
Triad 125.40 2682.60 MB/sec

System failed memory test

I am really new to Solaris so please forgive me if I sound really dumb. I was able to install Solaris 10, turned off my computer and now all I recieve is System failed memory test. Please help have tried different memory sticks and still recieve the same message.

is this a bios message? id suggest running a mem test if this is coming before the os starts up [http://www.memtest.org/]
if you have the mother board diag tools on cd, run those as well. unless this is a sparc system?

Memory Test Failure:

I was digging in my computer drawers for a plastic thing to hold one of my SD cards, and then I found a RAM chip that is 512MB. I need lots of these for the imacs, but I tried to install it, and it didn't work......
It is a Dell Memory. Make your next upgrade Dell Certified Memory. and there is also the sticker with the M with the circle around it and the small OS9-style font and a bar code.
It came with one of my imacs!!!!! It was inside it already. I don't remember if I took it out before or after one of the imacs stopped functioning. (also...could that be the cause of the damage of my first 500mhz imac??????)
I put it in a dark blue 400mhz imac and it has 10.3.9 and 9.2.2 but I have it set to boot into 9.2.2 and it said "Memory Test Failure" or something like that. Everything booted successfully. And then I went to System Profiler. And it did not say 512MB.
My very first mac was a power mac g3 and it had issues. I thought it would be any number of things. I dismantled it. While I did not have any 512 modules (I want and need lots of them) I decided, reluctlantly, to put in some of the 256mb modules in the imac. And...
One of the modules caused the imac to never boot. I took that one out. I put another one of them in and instead of the chime, it there was a sound that was similar length, but it sounded like a common stand-alone analog television not recieving any signals. That static noise with the white "snow"?? It sounded like that. "BZZZZ"!! I took that one out. There are two 256mbs, but I want 2 512mbs,
and...
THAT is what was wrong with the power mac G3?!?!?!?!?!?! I already took it apart, thinking there wasn't anything easily fixable on it!!!! }=S I guess I will put it together again... But that won't happen until I have some more RAM chips... I do not like 64 mb and 128 mb chips. }=S
All 4 of the 256mbs were functioning. I bought them as used, and it said that it will fit in g3s. Why are 2 of the 256mbs not functioning any more???? I once had Tiger on Power Mac g3. It is a blue and white g3. Could Tiger's Dashboard have zapped the ram chips??!!!!!!!
Anyways, for every imac, I would like 2 512 modules. Which ones will work??? Ones that are certified Dell are obviously not. XD
and will dashboard zap the memory?????? I do not have Tiger installed, but if I install it, will it damage the memory????? =S

Which iMac do you have? All iMac G3 models only have two memory slots.
What iMac do you have?
Query by serial number
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )
You could buy an external DVD drive. It needs to be firewire and bootable by Mac OS. If you have another PPC with firewire, you could try target Disk mode and installed tiger that way.
You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
Open Firmware, boot into Open Firmware.
Power on your iMac while holding down commandoption+of
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
On my machine, I have 4.1.9f1.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
http://docs.info.apple.com/article.html?artnum=75130
"The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
You can download the Mac OS 9 updates from the Apple site.
http://support.apple.com/kb/HT1387?viewlocale=en_US
For tiger, you need 256meg of memory.

MS 6507 Wont stop memory testing

I have a new (yes i know it is old) MS6507 mobo with a PIV 1.8GHz, 512MB (2 x 256MB) GeForce2 MX440 64MB
When i power it on all that happens is the Bios details are shown along with the CPU spec.
The memory test runs through, when it reaches the max memory it restarts to count again. This is all that happens until power is switched off.
The "esc & del" keys are not active in fact the keyboard has the "Caps / Num & Scroll" lights on all the time.
I have replaced memory, keyboard as well as disabled HDD and Optical drives and still have the same problem.
I have tried resetting the CMOS settings.
Do i have a dead mobo?
regards
Tony

I dont think so, I just think that the Memory Check-Sum Option in the BIOS is either Stuck in the Check Memory Loop, or you have a Bad RAM Module, Have you tried to BOOT with a Different Memory Module?...........Sean REILLY875

HP Pavilion DV7; System will not boot; Memory Test Failed using Advanced System Diagnostics

Not sure exactly how, but I managed to contracted several variants of the nasty Rovnix virus and now my system will not even boot into Safe Mode after trying to restore to several different restore points. Enabled bootlogging, but not sure how to retrieve the log.
Currently am able to get into HP Advanced Diagnostics and began Start-Up Test. Test failed on Memory Module:
Failure ID: Q0AE6C-5LS79T-MFH15G-406N03
Any next steps or directional assistance would be greatly appreciated. Thank you in advance!

Hello @GarrettBishop,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook computer has failed a memory test in the advanced system, and I would be happy to assist you in this matter!
Since the Failure ID has come up with Q0AE6C-5LS79T-MFH15G-406N03, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

No RAM banks passed memory testing?

I was running Firefox and everything froze up, even the mouse was stuck. I tried to force quit, but it didn't work. So, I turned the computer off, and when I tried to restart I get nothing. The fans start up, but the screen remains black and I hear 3 loud beeps.
I looked this up and it means *no RAM banks passed memory testing*. I have no idea what that means, but I need to fix it ASAP since all my schoolwork is on this computer. With limited computer knowledge, is there a way I can fix this myself? (i.e., mashing special sequences of keys while putting my feet behind my head and chanting OM?)
The nearest Apple store is soo far away... This has never happened before, and I haven't had any problems since I bought the thing almost 3 years ago.
Maybe I'm just due?

Welcome to the Apple discussions.
First, remove anything attached externally to your Powerbook.
Reset your PMU: http://docs.info.apple.com/article.html?artnum=14449
Next, reset PRAM: http://docs.info.apple.com/article.html?artnum=2238
Can you boot now?
If not, next you should reseat (take it out and put it back in) the memory. Can you boot now?
Next, you can try replacing the memory (take both out if you have 2 and get one replacement to see if it works). Can you boot now?
If these steps didn't work, this is likely a logic board issue. There are some vendors who will repair the memory slots, or Apple will replace the logic board (Apple doesn't repair your logic board). Some Apple stores have a flat rate (around $325+) to repair anything wrong with your Powerbook.
If may be that an Apple Authorized Service Provider is closer to you, which you can find at http://www.apple.com/buy/locator/service/

XI/PI performance/stress test report

Dear friends,
Does anybody have the XI performance/stress test report or the template for the reference? I need to write a report, but currently still don't have any idea about the content in this document.
Thanks so much for every kind help.
Regards,
Bean

Sorry guys, but I mean a document and not SAP transactions

KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone

KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone
Just noticed this; SWEET!
-----ProcedureTo perform a test using the hardware diagnostic tool on the BlackBerry smartphone, complete the following steps:
On the Home screen on the BlackBerry smartphone, click Options.
Select Status.
On the Status screen, type test.Note: On BlackBerry smartphones that support SureType® technology, use the multi-tap input method.
From the menu on the Device Self Test Application screen, select Start.
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/

This is cool!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can i disable the memory test when i start up photoshop? my computer freezes two minutes en then photoshop starts, i know there is notting wrong whit my memory in my computer

when i startup PS then i look two minutes to the startup-logo en see that my memory is being checked.
how can i disable this memory chek in PS?
this problem started a few days ago en this version off PS is working on my computer ol most a year without problems
i have checked my hardware very intensive and there is nothing whrong with my installed ram
this is my system info, sorry that this is not translated into englis, i am from the netherlands and i can just a litle englisch
Adobe Photoshop Versie: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Besturingssysteem: Windows 7 64 bits
Versie: 6.1 Service Pack 1
Systeemarchitectuur: Intel CPU-familie:6, Model:10, Stepping:5 met MMX, SSE-integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Aantal fysieke processors: 4
Aantal logische processors: 8
Snelheid processor: 3073 MHz
Ingebouwd geheugen: 16375 MB
Beschikbaar geheugen: 13944 MB
Hoeveelheid beschikbaar geheugen voor Photoshop: 14750 MB
Geheugen in gebruik door Photoshop: 93 %
Blokgrootte van afbeelding: 128 kB
Niveaus voor afbeeldingscache: 4
OpenGL-tekenen: Ingeschakeld.
OpenGL-tekenmodus: Standaard
OpenGL-modus Normaal toestaan: Waar.
OpenGL-modus Geavanceerd toestaan: Waar.
OpenGL-modus Oude GPU's toestaan: Niet gedetecteerd.
Leverancier videokaart: NVIDIA Corporation
Renderer videokaart: GeForce GTX 460/PCIe/SSE2
Scherm: 2
Grenzen:= boven: 0, links: -1600, onder: 1200, rechts: 0
Scherm: 1
Grenzen:= boven: 0, links: 0, onder: 1200, rechts: 1920
Nummer videokaart: 1
Videokaart: NVIDIA GeForce GTX 460
OpenCL niet beschikbaar
Versie stuurprogramma: 9.18.13.4475
Datum stuurprogramma: 20141112000000.000000-000
Stuurprogramma videokaart: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Videomodus: 1920 x 1200 x 4294967296 kleuren
Bijschrift videokaart: NVIDIA GeForce GTX 460
Videokaartgeheugen: 1024 MB
Rechthoekige structuurgrootte video: 16384
Serienummer: 92298830452574092077
Toepassingsmap: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Tijdelijk bestandspad: C:\Users\gert\AppData\Local\Temp\
Werkgeheugen van Photoshop heeft asynchrone I/O ingeschakeld
Werkvolume(s):
C:\, 223,5 GB, 112,9 GB vrij
Map met vereiste plug-ins: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primaire map voor plug-ins: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Map voor extra plug-ins: niet ingesteld

Photoshop doesn't do a "memory test".
When Photoshop says "measuring memory" during startup, it is asking the OS how much RAM is available and what hard disks are available for scratch disks.
If you have network volumes mounted that are unavailable, then the OS may take a while to time out on accessing those drives.
The same goes if you have a bad USB drive connected.

Performance Memory Test

Similar Messages

Maybe you are looking for