Performance meter and video drivers??

hi,
I have instaled vista x64 sp1 on MBP early 2008. In performance meter for graphic and gaming graphic is value 1. Drivers are are installed regulary nvidia 8600 gt and no other problem insted this values. Can I improve this and do I need to update drivers and can someone provide me a link.

*"I have instaled vista x64 sp1 on MBP early 2008."*
You should probably post your question in the Boot Camp forums, as this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows.
http://discussions.apple.com/category.jspa?categoryID=237

Similar Messages

Need info to reinstall xp pro and put chipset and video drivers in

could someone walk me thru or link me to a tutorial how to install xp pro
and when I add chipset and video drivers ?
I cant take any more problems from this install

the chipset drivers are on mobo cd will I get a prompt from windows or I just put mobo cd in?
video ati drivers there are 2 setup.exe setup catylyst both will install if I clk on exe [setup]
sorry to be so dumb I havent done an install in years

Audio and video drivers for IBM Lenovo think center Pc

Hi
This is shiva and i require audio and video drivers for the following pcLenovo ThinkCenter M/T -9389-A76 S/N- ****** where to get it please mail me or leave a scrap here , regarding the link. *@*
Moderator edit: Removed serail number to prevent mis-use. Masked member's email address to prevent it from being scooped up by the spam crawlers. Please use the private Message (PM) feature instead. Click on the member's name>Send this user a private message.

Hi Shiva,
You can find drivers here:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66440
If you have XP then you might require following for audio as well:-
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-65440 [SP1]
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-65456 [SP2]
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

HP 15-R074TU Audio and Video drivers

Hello,
Recently 2 weeks back I have bought HP 15-R074TU laptop free dos. I have installed windows7 64 bit. And other required softwares, I have problems with audio which is very low. Video display is not proper, movies are not comfortable to watch without any reason get stucks. I have installed HP recommended video and audio driver but still having problems.
Requesting you to recommend the audio and video drivers for HP 15-R074TU model, which will be very helpful for me
This question was solved.
View Solution.

Hi:
See if the graphics driver directly from Intel works for you...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24245
Try the audio driver directly from Realtek. Accept the agreement. DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...

Audio and video drivers defect?

Hello there,
since yesterday i have a big problem with my iMac. It can't play any Audio and Video anymore. Video editing like Final Cut Pro 7, Premiere Pro and After Effects are crashing, when youre trying to start them. Same thing with iTunes and Diablo 3. Photoshop seems to work fine. Browsing in the internet is fine but also no video and audio here. And my system seems to be way slower than before.
What did happen? Well i was working in after effects and hearing some music via iTunes and had some preview running in the finder (cover flow i think is the name of feature), Then the sound stopped but i didnt bother to much about it. But then cover flow also stopped working. So i did a restart and after that the problems were there.
My Suggestion: After Effects is missing output-modules, in the audio menu in the system preferences there is no output modul avaiable either (no, even no digital) although the boot sound works perfectly. So i guess the drivers for audio and video aren't working anymore. But i have no idea how to fix this.
What i've tried: i've reseted the nvram two times, i install mac os X snow leopard again (without deleting the previour installation) and run all updates. I also reseted the System Control Manager (unplug the imac for fifteen seconds) and run the Apple Hardware Test. The latter said there is an error 4MDT/4/40000003:HDD -1299. No fking clue what this means. Google didn't help.
Can someone help me pls or do you know if the people at the genius bar can handle this kind of problem? I have an appointment at the genius bar on saturday, but i have no idea how trained these people are at fixing mac os issues.
ah and before i forget: i didnt configure the time machine :/ so there is no easy moving back to a time the imac was working.

Yeah i know its the hard disk drive. I just cant find anything what this code means besides theres something wrong with hdd
And yes i already backed it up, but anyway thanks for your advice.

Windows 7 Touch Screen and Video Drivers for HP Pavilion tx1219us

Updated to windows 7 and can't find drivers for the Video Driver and Touch Screen. Can anyone help me?

Bummer...
That is even an older GPU than the GMA 900.
It is an Intel 82852/82855 GM/GME Graphics Controller.
OK... I have a possible driver you can use for that. No guarantee it will work great but it should work...
Here is the link to my OneDrive folder.
https://onedrive.live.com/redir?resid=832F4957D2E51B93%21263
Download and unzip the file labeled Intel 82865g Driver (Vista - Win7).
You have to use the manual install method like you did with the other 2.
Good luck!

HP DV1000 Sound and Video Drivers Won't Install

I just had to reformat my DV1000 due to a corrupt Windows XP installation. I downloaded the drivers from the HP website but they will not install, it just says FAILURE at the end of attempting to install them.
The p/n of my laptop is ED338AV. Any help would be greatly appreciated!!
This question was solved.
View Solution.

Hi,
All drivers for Your model are here.
First install chipset driver and reboot. here
Before installation of sound driver remember about installing MS-UAA first here
When You will do that start installing other things.
If You will still have any troubles write first which SP are You using on this XP system. SP1, SP2 or SP3?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Sound and video drivers for G60-453NR laptop?

Will HP be providing updated Windows 8 drivers for G60 laptops?
Thanks,
David

Hi David,
If Windows 8 drivers are released for your notebook, they will be posted here.
HP is not going to support hardware for Windows 8 on any system purchased before Oct 1st 2011. Most Windows 7 drivers will work in Windows 8.
Check out this page to see if your computer has been tested by HP with Windows 8.
You can run the Upgrade assistant software, which will scan your PC and generate a report on what is currently installed on your PC is compatible with Windows 8. This upgrade guide for Windows 8 provides a lot of information that is needed for anyone considering upgrading.
I hope this helps,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Adobe Updates and Video Drivers

Could not find a better place to post this one, but perhaps there is. But for now....
I have a Lenovo 410 Laptop with discreet Nvdia video card, Windows 7 32 bit. I use it both docked with a large monitor and undocked. It has profiles for each situation. It allows for color management by the video card or by other applications - selectable by check box.
I use the Nvidia controls and have nicely calibrated monitor and internal LCD.
After each and every Adobe Update - whether to PS or Bridge or InDesign, the checkbox has moved to "Let another application control my video settings". Happens, I believe, every time.
This should not be. At least it doesn't change settings, but it takes over control of my color management. If there is any way to prevent this. I would like to know.
~Bob

I have a Vista x64 system with a nVidia Quadro FX 3500 card in it.
In my case I had the nVidia Control Panel set to "Use nVidia Settings" to calibrate the video card output so that it would generate a decent display using the sRGB profile on its inexpensive monitor. The machine is not used for color critical work, and that was a decent way to get the display close enough for its uses.
Just now, when I went to check it, I found that the setting had returned to "Other applications control color settings".
This is a server, and doesn't get much interactive use. I don't think it has had any Adobe updates (other than Windows Updates) as far as I know since well before the nVidia control panel setting was the other way. That machine does have Photoshop CS4 installed on it (no CS5), but CS4 has been updated to the latest for months.
Certainly something changed it, but this tends to point toward other things causing it.
-Noel

Pavilion a1020n Device Drivers - Audio and Video

Hello,
I have a Pavilion a1020n and recently loaded it with Windows XP Pro SP3. However, I can't seem to find the Audio and Video drivers. In Device manager, I'm missing 1. Audio device on high definition audio bus and 2. Video Controller (VGA compatible). I have searched everywhere and could not find the driver, even on HP's website. HP's website only has updates, but not the original drivers. Thanks for your help.

Hi:
Here is the link to the drivers for your PC:
Chipset: Install first then reboot:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18494&lang=eng
Graphics:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=12531&lang=eng
Audio: Accept the agreement, download and install the third one on the list.
http://218.210.127.131/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownType...
Paul

Performance meter in weblogic console

All,
Semi new to memory analysis on the server side (distributed garbage
collection and all). I was rather used to doing client application memory
leak analysis. Are there any good starter guides for memory analysis when
doing load testing?
I am currently working on a project where we do severe load testing against
servlets that hit session level EJB and then entity EJB. We see the heap
(Server->monitor->performace) sawtooth slowly up until the server throws out
of memory exceptions and starts to fail. We have already fixed a few
glaring problems with our code, but the sawtooth remains.
What is the garbage collection routine under WebLogic? Does it run
periodically? Does it run during high/low activity? Should it not be
called before any OutOfMemory exception is throw?
If you set the ejb's to keep too many ejb references in the cache, will the
server sanity check this and bump some out of the cache when memory gets
tight? Basically, I'm asking could I shoot myself in the foot in
weblogic-ejb-jar.xml or will the server help me out?
Finally, if you start mydomain as shipped and go to the performance graph it
slowly sawtooths up at a very slow pace. If you let it run over night it
eats up 10 megs or so. Why is this? It looks rather bad, but I can't
assume this is as it looks on the surface.
Sorry for all the questions, but maybe this will start a good thread.
Andrew Spyker ([email protected])
Software Engineer
http://spyker.dyndns.org

JVM heap usage will grow and shrink throughout the life of the server. Even an
idle WebLogic server is allocating and freeing object instances. Therefore,
when looking for a "leak", make sure that you account for the state of the JVM
garbage collection and compare "apples" to "apples".
I find that it is best to compare the heap usage after full garbage collections
(GC[1]). Try enabling -verbose:gc and comparing each of the full GC results.
Provided that your server is handling a constant and steady load (or is
constantly idle), you should see little change in heap usage after each full
GC. However, if your your server is idle you may need to force GC to run every
hour or so. By default, you need to use nearly all of the allocated heap
before full GC will kick in.
-Charlie
Andrew Spyker wrote:
"Mike Reiche" <[email protected]> wrote in message
news:[email protected]...
The garbage collector is a function of the JVM, not of WebLogic. Look atthe JVM
documentation for an explanation of garbage collection.Gotcha.
Weblogic, without any application code runs fine. When you add YOURapplication
code, then you might run into problems. Hence it is your code that ischewing
up (and not releasing) the memory. JProbe is good at find this kind ofproblem.
You can also narrow things down - for instance - hit only one servlet andsee
if the memory grows. Or remove references to session beans, and hit theservlet.
I should be more specific. I installed WLS SP2 on Redhat Linux 7.1 and ran
startWeblogic.sh from the default mydomain. I didn't make any
modifications. I ran the performance meter and the memory did grow over
night significantly. This suprised me. Do I attribute this to Linux? Our
production environment is definately Solaris, but I'd like to be able to
diagnose memory leaks on Linux. I don't want this false positive in the
tests. Am I missing something here?
OutOfMemoryExceptions occur when the JVM attempts to allocate more memorythan
is available - even after running garbage collection. The JVMoption -verbose:gc
will also shed some light on GC.
The Java Heap is not the only part of the JVM that requires memory. Inrare cases,
much memory is consumed by classes and methods in memory, heap (not javaheap)
used by native code.
Mike ReicheThanks for the response ...
"Cameron Purdy" <[email protected]> wrote:
It is not easy. Optimizit and JProbe can help, as can a well-architected
application with classes that support dumping debugging information (to
evaluate object graphs) and serialization (to guage sizes).
Typical leaks are in session objects, static fields, and database driver
usage without proper closing of objects.
Peace,
Cameron Purdy
Tangosol Inc.
<< Tangosol Server: How Weblogic applications are customized >>
<< Download now from http://www.tangosol.com/download.jsp >>
"Andrew Spyker" <[email protected]> wrote in message
news:[email protected]...
All,
Semi new to memory analysis on the server side (distributed garbage
collection and all). I was rather used to doing client applicationmemory
leak analysis. Are there any good starter guides for memory analysiswhen
doing load testing?
I am currently working on a project where we do severe load testingagainst
servlets that hit session level EJB and then entity EJB. We see theheap
(Server->monitor->performace) sawtooth slowly up until the server
throws
out
of memory exceptions and starts to fail. We have already fixed a few
glaring problems with our code, but the sawtooth remains.
What is the garbage collection routine under WebLogic? Does it run
periodically? Does it run during high/low activity? Should it notbe
called before any OutOfMemory exception is throw?
If you set the ejb's to keep too many ejb references in the cache,will
the
server sanity check this and bump some out of the cache when memorygets
tight? Basically, I'm asking could I shoot myself in the foot in
weblogic-ejb-jar.xml or will the server help me out?
Finally, if you start mydomain as shipped and go to the performancegraph
it
slowly sawtooths up at a very slow pace. If you let it run over nightit
eats up 10 megs or so. Why is this? It looks rather bad, but I can't
assume this is as it looks on the surface.
Sorry for all the questions, but maybe this will start a good thread.
Andrew Spyker ([email protected])
Software Engineer
http://spyker.dyndns.org

Video drivers issue (dual DVI monitors off bay :: one black and white and one color)

Hello,
I have tried everything to try to make these two monitors color. They are both relatively new Dell monitors. Both are DVI, both are connected to the latest Lenovo bay for my T430 laptop. Both worked fine after I initially installed both video drivers (Intel HD Graphics Driver for Windows 7 [64-bit]) and NVIDIA Optimus Display Driver for Windows 7 [64-bit]). Then out of nowhere one of them (Dell 1) decides it wants to be seen in black and white! I initially thought it was the monitor itself, but when swapping monitors (Dell 1, Dell 2) the other monitor (Dell 2) went black and white when plugged into the DVI formerly used by the Dell 1 monitor. Ok, so now it must be the DVI ports on the bay station (Lenovo) right? Nope. I had a tech bring me a second, brand new bay (identical). Same issue! So this leads me to the video drivers...
Does anyone have any idea. I disabled each driver and reenabled each to no avail. The drivers are the latest drivers downloaded directly from Lenovo's site. Checked the driver settings/monitor setting using both Windows 7 Professional and Nvidia to see if anything stood out. Nothing.
Any help would certainly be appreciated. Thank you in advance! :~)

I got a new laptop and when I plugged it into my docking station the external monitors were all in black & white. My old computer still worked fine without changing any settings on the monitors. I found that I needed to go into Control Panel \ NVidia Control Panel \ Display \ Adjust Desktop Color Settings, then select the monitor I wanted to adjust, then set the slider up for Digital Vibrance. For some reason on the new laptop the NVidia settings defaulted to 0 for this.

HOW DO I FIND THE DRIVERS FOR WINDOWS 8 AUDIO AND VIDEO TO UNINSTALL?

I NEED TO INSTALL AND UNINSTALL WINDOWS 8 DRIVERS FOR AUDIO AND VIDEO SO THAT I MAY REINSTALL THEM, BUT I DON'T KNOW WHERE TO GO TO FIND THEM IN THE FIRST PLACE.
ALSO, IF I PURCHASE THE PROGRAM FOR UPDATING DRIVERS, WILL THAT PROGRAM ALSO INSTALL THE NEW AUDIO/VIDEO DRIVERS AND UNINSTALL THE FORMER ONES SO THAT I DON'T HAVE TO GO THROUGH SO MANY STEPS BY MYSELF. I FIND THE DIRECTIONS TO DO THIS FOR MYSELF VERY COMPLICATED.

Hi, I would like to assist you on this matter, however I would need some information from you first. I see that you are running windows 8. What is the make and model number of the computer that you are using? The windows 8 that you are using, is it a 32 bit or a 64 bit operating system? Please write back and I will be happy to do research on this issue.
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Does Boot Camp provide video drivers and all ???

Does Boot Camp provide video drivers and all ???

But I thought that video drivers was not avaible yet ???
otherwise I would be playing BF2 instead of surfing thsi forum '

Adobe premiere can not find any module capable of playing video. Update the video drivers and start again.

Adobe Premiere can not find any module capable of playing video. Update the video drivers and start again.
I've tried all the options suggested and the problem continues.
What else can I do?
Note: I had already worked before.
Windows 8.1
Notebook i7, 8M memory, video card Nvidia (updated).
Adobe Premiere Pro 2014
Please help me. Thank you.
mailto: [email protected]

Here is a link to an Adobe TechNote about the same issue with an earlier (much earlier!) version of Premiere Elements and Windows XP.
http://kb2.adobe.com/cps/324/324938.html
I'll leave it to Steve and Bill as to whether the fix offered in the link for Premiere Elements 2 would still be applicable to your version of Premiere Elements.
Hope this is of some assistance.

Performance meter and video drivers??

Similar Messages

Maybe you are looking for