Performance monitor- can't paste previously saved counters list

Hi all!
In Performance monitor mmc I can save currently used counters by selecting them, and right click -> “Save Settings as...”. These settings are saved in .htm file. If I open this file in Notepad, select all text, and then go back to empty
perfmon console, there are options to paste (with Ctrl+V or by button “Paste Counter List”) this counter list.
But nothing happens… My perfmon console stays empty!
This approach works exactly as expected in Windows Server 2008 R2, but not in Windows Server 2012. I tried on tree different server installations, and with no success. The only way I found to save and re-use later my counter list is to
start mmc.exe, adding performance monitor snap-in, select necessary counters, and finally save as custom console.
Did anybody knows why in Server 2012 cannot paste previously saved counter list In performance monitor console?

Hi all
I habe exactly the same problem: I have a text file containing all the wanted counters which I saved at a running Server 2008 R2. I simply copied that file to the other Servers (2003, 2008, 2008 R2) and it worked everywhere. But not on Server 2012.
I thought, ok, maybe the filesyntax has changed. So I started from the scratch and added few counters manually in the server 2012, chose "Copy properties" and saved them to a new file.
Afterwards I closed the performance monitor, started it again and tried to copy / paste them again from the text file. But nothing happened as mentioned by Oleg V. Ivaonov.
Thanks for any hint or solution, Andreas

Similar Messages

How can I revert to a previous saved file?

Hi,
I have been working on Word for Mac 2011 and have been saving continuously onto the same document as my work progresses. I always reference manually and somebody suggested I use footnotes to reference. This was too problematic as I needed to reference separately
at the end of three sections and footnotes was only allowing me one lot of references. So I copied and pasted my other two sections underneath the footnote referencing and Word must have assumed it was part of the footnotes because when I completed my
work and went back to re-reference each section manually and delete the old footnote references, I lost all my work done underneath the footnotes! Now, I hear you can "revert to previous saved file" or some other such thing to go back to a
previous save of the same document. Any help is greatly appreciated on how to do this!!
Thanks,
Ayema

If you haven't saved the document, pressing Command+Z will undo the paste.
If you have already saved the file then hopefully you have the option set in preferences to Always Create a Backup and in the folder where the original file is locate you will find a file name "Backup of..." the file name you are working on. This
will be a how the file looked prior to the last save.
If you don't have the Always Create a Backup option set, besides "Shame on You" then go to your Time Machine backup which should be no more than 1-hour old and you can get previous hours... assuming you have that function enable. If you don't then
again... Shame on You!
If you have neither of these built-in options set then I pray you are using my
GotUrBack application running, which will protect you with up to 9 levels of backup of your saved version of the file.
http://www.greatcirclelearning.com/zapps-got-ur-back
And if you don't have any of the above set or running then I'm sorry to have to say... you are out of luck and have a great deal of file recreation to do.
Kind Regards, Rich ... http://greatcirclelearning.com

View previous saved comments on mobile pdf app

On the computer, I can view my previously saved comments. Is there a similar feature on the mobile version of PDF? (Idk if it helps, but I have a nexus 7)

Vaibhav: Yes I was aware of seeing comments if you are already on the page.
My question is: say you put a stickynote next to an important table, definition and also one on a table (all in different pages). If I wanted to see a listing of these comments (without being on their respective page already or knowing the page they are in) Can I pull down a listing of these comments and then choose to go to a specific one.

HT1567 I can't see any music I previously saved. I tried to see if the it was hidden-my wife has just set up her own iTunes account, so i checked "previous iTunes library and this is now displayed at the top of the screen -is this the problem?

I couldn't see any music on iTunes that I had previously saved. I looked in Previous iTunes library. "Previous iTunes Library" now appears at the top of my iTunes screen, is this the problem? If so how do I fix it so i can access my saved music?Also my wife just before this set up her own iTunes account on this PC.
Cheers
Jim

For an updated, I performed an SMC reset and that has solved the problem for the time being. This thread on the World of Warcraft Mac Technical support forum is very helpful, though it seems the issue has not yet been resolved and the SMC reset is a temporary fix at best.

Just joined PS cloud (free trial), can it use actions saved previously in old CS3?

Hi, I’m just having a go at the Cloud based Photoshop, and I’m currently on the free trial version Please can someone let me know if I can use my ‘Actions’ previously saved in CS3? – and if so, how to do it? Also can the Cloud version access RAW files? – and from all cameras? I have had compatibility issue in the past with RAW files? And also (sorry for all the questions!) – does anyone know if the Cloud version is compatible with the Topaz plug–in filters? – can these still be added? Thanks in advance, emma

Save out your CS3 actions from the actions panel flyout menu. Then load them into CC the same way. You need to save out action sets; not individual actions.
You should do some test runs to make sure they work as intended. Minor differences in behavior between versions can easily throw actions off - especially since exact commands are recorded (not "intentions").
Raw file support is added to new ACR versions as new camera models are released. Each new camera model requires specific support, and updating to the ACR version that introduces such support.
Don't know about Topaz, you'll have to check on their website. Don't copy plugins over from old version, you must install a plugin version that is compatible with the Photoshop version.

Windows Performance Monitor Counters

There are no Windows Performance Monitor Counters for CF10?
Thanks, Carl.

Hi Carl,
Can you please log a bug for this.We will investigate the issue.
Thanks,
Asha
Adobe ColdFusion Team.

Capturing OBIEE Performance Monitor - Counters

Is there a place the counters displayed on the performance monitoring page in OBIEE is captured or can it be read so that we can see some trending on the cache usage?
Thank you in advance for any help.

The DMS counters are not captured anywhere.
You can access them using OPMN or WLST, and capture them using your own tools.
This post lists your options with more details: http://www.rittmanmead.com/2013/03/performance-and-obiee-execute-and-measure/ (under "OBI Metrics")

How can I open a Numbers file to the last cell used on from the previous saving of that file?

In Excel, the .xls file would always open on the the cell location where the file was previously saved. Very nice to have feature when the file is long ,so one does not have to keep scrolling down the page to make the next entry every time the file is opened.
Can Numbers do this? I can't find an option for it.
After opening a file, I must always scroll down to the last entry or where I want to start inputting data. What a pain.
Is there a way to open a numbers file to where one was located when it was previously saved?
Anybody know? Please help.
Thanks

CF,
When I Save a Numbers document with a cell Selected and then close the document, the same cell is still selected when I reopen the document. Isn't that what you are asking for? Furthermore, if I have chosen 100% zoom scale, the selected cell is displayed in the same screen position as when it was last saved. What you may be seeing that you don't care for is that if the zoom is other than 100% the table's position in the display window may be different than at the last Save.
Jerry

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

How do I undo an update to pages 2.1 on an iPad 2? I can no longer open a document previously saved, even when I try to open it in the iCloud and on my Mac.

How do I undo an update to pages 2.1 on an iPad 2? I can no longer open a document previously saved, even when I try to open it in the iCloud and on my Mac.

With IOS Pages v2.0 and v2.1, Apple introduced a new document format that is incompatible with prior Pages versions on IOS or OS X Pages ’09. Opening older documents with these recent versions of Pages will permanently prevent the document from opening in earlier versions of Pages on IOS or OS X.
Nice of Apple to warn people.
There is no undo of an iTunes application update, short of forcing iTunes to restore IOS v6 back on that iPad 2. Even if you did that, you won't find the IOS Pages v1.7.2 in the iTunes store now.
IOS Pages v2+ will allow you to export content in Word .docx format. You do this by first tapping the box with an up-arrow in it (next to the left-most +). A menu will slide up — choose Send a Copy. Select a document icon. Pick Mail, and then Word. Your Pages v2.1 document will now be converted to Word .docx, and attached to an email body. Fill in the to address and send.

Performance monitor reports and graphs don't show all the counters that were captured

I've run into an odd behavior of performance monitor that I haven't been able to clear up yet: after I run a data collector set, the resulting report only shows a partial list of the counters that I captured, and so does the graph of that report (but different
items).
For instance, I chose the following counters for the data collector set:
\PhysicalDisk(*)\% Idle Time
\PhysicalDisk(*)\Avg. Disk Queue Length
\PhysicalDisk(*)\Avg. Disk sec/Read
\PhysicalDisk(*)\Avg. Disk sec/Write
When the data collection ends, the report that gets displayed shows all those counters for _Total instance and C:, but then E: only shows % Idle Time and Avg. Disk Queue Length. That's it, the report ends there, even though I also have F: and V: drives on
this server.
If I choose to view the graph of this data collection, it only shows those four counters for the _Total instance.
It took me a while to realize that all the data is being captured, but it's just the display that is truncated. If I view the folder then open the report.html, it actually shows all the data. Same with the graphs. If I select to add counters and add
all the missing counters, they are displayed.
I have searched high and low but haven't been able to find more than one post at ServerFault where someone had a similar issue, but no real solution or cause was provided, so I was hoping that someone here might have an idea.
I also found a variety of articles about missing counters due to registry settings or because the counters needed to be reset, but that's a different issue that doesn't apply in my case. By the way, this is on a windows server 2012 R2 VM (file server).

Hi SomeAdmin,
The counter missing often caused by the related registry value is corrupted, please first refer the following related KB then perform a fix then monitor the issue again.
Event ID 3012 — Performance Counter Loading
http://technet.microsoft.com/en-us/library/cc775053(v=ws.10).aspx
More information:
Overview of Performance Monitoring
http://technet.microsoft.com/en-us/library/cc958257.aspx
PerfGuide: Analyzing Poor Disk Response Times
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
Analyzing Storage Performance using the Windows Performance Analysis ToolKit (WPT)
http://blogs.technet.com/b/robertsmith/archive/2012/02/07/analyzing-storage-performance-using-the-windows-performance-toolkit.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have my Mac with Mountain Lion and my IPad synched and have Pages on both. I have doc in Word on my Mac I want to access on my IPad while I am away travelling. But I can't locate them. Where should I look to find my previously saved Word docs?

I have my Mac with Mountain Lion and my IPad synched and have Pages on both. I have doc in Word on my Mac I want to access on my IPad while I am away travelling. But I can't locate them. Where should I look to find my previously saved Word docs?

Welcome to the Apple Support Communities
It looks like you haven't got them on iCloud. On your Mac, open Pages and drag the Word documents to the iCloud window

Error installing Oracle Counters for Windows Performance Monitor

Hello,
I have installed Oracle EE 11g 11.2.0.1.0 on a Windows 2008 R2 server. Now, I am using the Oracle Universal Installer to install the Oracle Counters for Windows Performance Monitor 11.2.0.1.0
Source path is D:\Share\11gR2_win32_11gR2_database_install\database\stage\products.xml
Installation Type is Custom
Install Location is C:\app\dmadmin
Path is C:\app\dmadmin\OraHome_1
I de-select all product components and select the following two:
Oracle Windows Interfaces 11.2.0.1.0
Oracle Counters for Windows Performance Monitor 11.2.0.1.0
I get the following error:
OUI-10150:Error: A runtime exception occurred while setting s_digCfgNamingLabelSIDnull in component Database 11g 11.2.0.1.0 . Installation cannot continue for this component.
I am given the choice of Stop installation of all products and Stop installation of this component only which both result in non-installation of selected component.
Does anyone have any advice or solutions for this error? I have tried re-booting the server, but get the same error.
Thanks for your assistance,
Stumped

OUI from ORACLE_HOME (OH\oui\bin\setup.exe) cannot be used to install components from 11.2.0.1 installation media (products.xml)
This is documented, but I am not able to locate it now.
Have you checked if the Performance Monitor files are already installed or not?
Thanks
Srinivas

Oracle Counters for Windows Performance Monitor Tool-is it available on XE?

Hi,
I'm looking for a way to deal with Windows Performance Monitor on XE db- I've found documentation on Oracle Counters tool but im not able to initiate it (db or client)- is it available on XE? or is there any other option to work with Performance Monitor?
Regards,
BD

Hi,
I'm looking for a way to deal with Windows
Performance Monitor on XE db- I've found
documentation on Oracle Counters tool but im not able
to initiate it (db or client)- is it available on XE?No it's not part of XE distribution
or is there any other option to work with Performance
Monitor?You must use at least Standard Edition.

Performance monitor- can't paste previously saved counters list

Similar Messages

Maybe you are looking for