Performance Point: Code blocks are not allowed in this file.

Hi All,
I'm trying to use Performance Point 2010 in Sharepoint 2010...
I have start the application in centrel admin
I have created a site collection based on the Bisuness Intelligence Center template
I can surf the new Site Collection but when I try to open the "Start using PerformancePoint Services" link I get the following error:
"An error occurred during the processing of /PerformancePoint/Pages/ppssample.aspx. Code blocks are not allowed in this file."
is there any way to fix it???
is there any good source to understand and deploy Performance Point 2010??
thanks All
Vit

I have tried the above PageParserPath settings, however none seem to fix this problem for me. Does anyone have another solution to this issue?
I've tried...
<PageParserPath VirtualPath="/Pages/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
<PageParserPath VirtualPath="/PerformancePoint/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
<PageParserPath VirtualPath="/mysitecollection/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
Help Please!!!

Similar Messages

Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
Sridhar

Hello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi

Reg msg "Payment method(s) are not allowed for this program".

Hi...
I am copying a standard program RFFOES_T (Print program for bank transfer) into a custom program. When i try to execute the custom program it gives me a msg saying
"Payment method(s) are not allowed for this program".
Can you please Provide a solution for this problem.
Regards,
Indira.

Indira,
1.RFFOES_T is using Logical database PYF.Seems you have copied it as it is without changing the attributes of the program.
2.As it is using logical database PYF it needs to be tagged to the respective payment methods in FBZP settings as below
FBZP
>>Payment methods in Country
>> in the next screen click on position and give the company code and payment method
>> in the next screen select the corresponding payment method and click on the details(ctrlshiftf2) ie magnifying glass icon
>>in the next screen within Payment Medium you will get to see two radio buttons as Payment medium workbench(uses DMEE tree structure) and payment medium programs (uses the standard prog).Here in Payment medium Program either the standard prog or your zprogram should be tagged otherwise you will get the error message as you mentioned.
3.Once you tag the program in the FBZP setting to the respective payment methods,after the payment run you will be able to run the program.
4.If you don't want the program to be linked to FBZP settings then as far as my knowledge is concerned you need to avoid using logical database PYF and change the entire code using the regular database tables like reguh,regup,bkpf,bseg etc.(I think this should be the best approach)
Thanks,
K.Kiran.

Sorry. Credit Cards are not allowed at this store....

So, I have a US based credit card and I'm located in the US. All of my account info is updated with my latest address and credit card info. I can't seem to purchase anything in the store with a credit card. When I click on buy it brings up the message "Sorry. Credit Cards are not allowed at this store."
Really? Nokia doesn't want to sell me anything? Is this a bug or intentional?

At some point in the US, if you used AT&T SIM cards, the Nokia/Ovi Store required that purchases are done via the phone bill (so called operator/carrier billing). Presumably Nokia's agreement with AT&T states that for AT&T customers, credit/debit card payments are to be disabled. I'm not sure if this still the situation in the US.

F0282 payment method(s) are not allowed to this program*

Hi.......... every one
after running app i select systems in menu bar>out put control>press enter and clicked on execute button,then i selected the log and click on the display contents button but the system is giving the error message that
f0282 payment method(s) are not allowed to this program

HI,
The error message F0282 that you are receiving, is not an error but the
normal system functionality. This would be due to your customising so
please check the detailed error description provided in detail in this
reference.
For example, the detailed error description would be as below
=====================================================================
   Message no. F0 282
   Diagnosis
   In order to avoid incorrect payment media being able to be created
   with a program specified incorrectly, exactly one program is assigned
   to each payment method.
   System Response
   The list of payment methods(T) may only be processed by other payment
   medium programs. Therefore these payment methods are not processed by
   program RFFOM100.
   Procedure
   Check the payment medium programs allowed in the country IN payment
   method specifications.
=====================================================================
In customizing trans. FBZP, you have select the report that you are
going to use for the payment method. Therefore, for example if you are
using the RFFOUS_T in customising and afterwards try to use RFFOM100
separately, you will get this message so you will have to change your
customizing accordingly..
xSo please check your customising in FBZP under Payment Method/country
settings.Hope this info helps you to resolve this issue.
Regard
Madhu M

Wild Cards are not allowed for this info object

Hello Experts,
I am getting some problem, when I trying to find the some selections for info object in variable selection screen; it giving some error like u201CWILD CARDS" are not allowed for this info object.
I am trying to find the search item like this: TELENOR*
When I click on find button it is giving error.
Please any body help me in this matter.
Thanks & Regards
Prathap.

Hi,
You need to create a selections option variable on the characteristic that needs to be filtered.
After doing this, when you run the query, select the * from the dropdown box,and give the value.
Hope this helps u..!!
-Pradnya

What does 'init functions are not allowed in this objset' mean and how can it be fixed?

We have added some init functions to the beginning of the obj.conf file so that we can proxy off to Weblogic.
However when we try to run the Web server we get an error message 'init functions are not allowed in this objset'.
The syntax seems to be correct. Has anyone any idea how this can be fixed?

You are probably using iPlanet Web Server 6.0 or higher; starting with 6.0, the web server does not allow Init directives to appear on the obj.conf file. Instead, place your Init directives in the magnus.conf file.
This is documented in the Installation and Migration Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/ig/migrate.htm#20780 in the Programmer's Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/pg/1-intro.htm#13565 and in the NSAPI Programmer's Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/nsapi/02_objcn.htm#13097

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

Code changes are not reflected in .swf file

Hi,
I have made changes in the code and compiled it and executed
the application.
But, the changes whatever I made are not shown in GUI part. I
am able to view the changes if I execute my application in debug
mode but not in normal mode. Even I have reinstalled my Flex plugin
in to Eclipse, that also not working.
Expecting your valuable solution for my problem.
-Sreedhar

Oh, I'm facing that problem almost constantly. I'm even
thinking to automate that process :)
One solution that I use in HTML pages is that I specify some
dummy random number. Say your SWF is called, my.swf. Then you could
try to specify a name like my.swf?rnd=4857845 and so on.
George

Code changes are not effected in .swf file

Hi,
I have made changes in the code and compiled it and executed
the application.
But, the changes whatever I made are not shown in GUI part. I
am able to view the changes if I execute my application in debug
mode but not in normal mode. Even I have reinstalled my Flex plugin
in to Eclipse, that also not working.
Expecting your valuable solution for my problem.
-Sreedhar

Run "Clean" command at FB2 from "Project" menu

Mixed periodicities in a forecast are not allowed In Demand Planning

Hi All,
I am running forecast in background by defining activity and job in transaction /sapapo/mc8t and /sapapo/mc8d .
I am scheduling the job in transaction in /sapapo/mc8g.
Before scheduling the job i checked the job in transaction /sapapo/mc8i and this check is fine.
When I am running the job in background i am getting the following error message:
"Mixed periodicities in a forecast are not allowed".
This error I am getting in the spool of job in SM37 transaction.
I ran a copy key figure macro in the same planning book with the same view and it is having no problem.
In my planning book i am having only one dataview and with that dataview only i am scheduling the job.
The strange thing is that the forecast is running smoothly in interactive mode in same planning book,same data view with same forecast profile.
Did anybody face the same problem in the past?
I am using SAP SCM 7.0 version.
Thanks In Advance,
Mukesh Pandey

Hi,
I contacted SAP on the same and they suggested me exactly what was the problem.
I will try to explain the problem with an example here as that would be easy.
Say, My storage bucket profile is a custom week.
suppose i am doing forecast at custom week level.
my time bucket profile in the planning book is "2 years in months".
So here in the background job we are expecting from the system to first divide years in months and than months to custom weeks. Here we are referring to mixed pereodicities.
So the rule is your time bucket profile and the bucket of forecasting should be directly in proportion of storage bucket profile.
it should not be
Year-->month--
>week
it should be
Year-->week or year>month or month--
>week.
I hope i am clear.
Regards,
Mukesh Pandey

Batch element raise error for few cases as Multiple entries are not allowed

Dear
Element type :' NON-RECURRING'
Multiple entry :' un-checked'
We have a commission element as non-recurring. As per company policy we allow this commission on Assignment criteria and it got successfully transfer we run it previous month. But today we are doing the same activity and getting error “Multiple entries are not allowed for this entry” in two cases while batch validation. However when we enter this element manually under the assignment element entry window, it allow user to save without any restriction.
So, why system not allow it through batch window.
I am very thank full to you, pls very critical.
Pls advice.

User uploaded duplicate assignment for the same element, therefore system was not being allowed to process for that batch. we removed duplicate record and the error was removed.

Child actions are not allowed to perform redirect actions. partial view

I'm using ASP .NET MVC 5
I'm trying to use Create view with the index view to show the created item in the same page. For that I'm using _CreateCategory as the partial view and I added following to the index view
{Html.RenderAction("Create", Model);}
My controller's get and post methods as follows for the Create
[HttpGet]
public ActionResult Create()
return PartialView("_CreateCategory",new Inventory.Models.Category());
[HttpPost]
[ValidateAntiForgeryToken]
public ActionResult Create([Bind(Include="Id,Description")] Category category)
if (ModelState.IsValid)
db.Categories.Add(category);
db.SaveChanges();
return RedirectToAction( "Index");
return PartialView(category);
}My index method as follows
public ActionResult Index()
return View(db.Categories.ToList());
I didn't do any changes to the partial view. I'm getting error "
child actions are not allowed to perform redirect action
. I tried many ways to overcome this. But no luck yet.

Please post ASP.NET questions in the ASP.NET forums:
http://forums.asp.net
The MVC forum is here: http://forums.asp.net/1146.aspx/1?MVC

You are not allowed to enter a tax jurisdiction code for country US

Hi All,
We are having this message popping up "You are not allowed to enter a tax jurisdiction code for country US" when we try to add an item to a shopping cart. SRM 4.0 Classic scenario.
Also when i process the shopping cart and create a PO out of it, our R/3 4.6C dosnot let me release the PO and error message is :"no tax jurisdiction code found"
I have looked at some of the earlier threads but i could not find a definite solution. Has anybody faced similar problems? Please let me know !
Thanks
Sundeep

Hi Sudeep,
How did it work? Do you have to implement any BADI's or SRM or R/3 side? As we are getting same error while creating Shopping Cart in SRM.
I have checked the plant data in R/3 and Jurisdiction code has been maintained there.
Please advise
Thank you
Ritesh

Will the new watch be able to be used as a fob watch? In the NHS we are not allowed to wear wrist watches so this would be a great selling point.

Will the new watch be able to be used as a fob watch? In the NHS we are not allowed to wear wrist watches so this would a really useful feature.

will there be a mount for the watch that facilitates it being clipped onto a uniform rather than kept in a pocket to get broken or lost? I understand that it might not be able to do some of the more technical things like keep track of my pulse etc. However if it doesn't have the facility to be worn as a fob with a specific mount it's not going to be any use to lots of people. I possibly wasn't very clear in my first question.

Performance Point: Code blocks are not allowed in this file.

Similar Messages

Maybe you are looking for