Performance point service for SharePoint List
Hi All,
I've a requirement to create Performance Point service to display in the SharePoint List. List contact single line of text columns.
So i would like to know whether there is any possibilities to utilities this
PPS for this SharePoint List. Please suggest.
Thanks in advance!
Arun Prakash
Hi Arun,
Could you please elaborate your demand?
Also you can have a look at the blog for using PerformancePoint Services in SharePoint:
http://www.codeproject.com/Articles/783405/PerformancePoint-Services-in-SharePoint
http://blogs.msdn.com/b/performancepoint/archive/2011/09/19/performancepoint-data-connection-libraries-and-content-lists-in-sharepoint.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support
Similar Messages
-
Performance Point Services in Sharepoint 2010 getting annotations out of the databasse
Hi,
I have a requirement to put in a Reporting Services Report the comments\ annotations from a PPS score card.
I see the annotations table in the database, but don't see how to connect the GUIDS in the annotations table to the scorecard name. Is there information that can show me how to get this data?
David Botzenharttry this one:
http://sharepointsolutions.blogspot.com/2008/06/how-do-i-make-our-sharepoint-site-stop_17.html
if fixed the issue fine other wise could you please check the ULS logs/ application ?IIS logs at the same time user kicked out.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
HI
In Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?
here in sp 2013 i upgraded sp 2010 BI site and when i open dashboard pages they not display the pointers.
and when i open dashboard designer i was unable to connect Analysis server 2008 R2 where data source exists
adilHi
1) here i migrated a Publishing web applications and bi sites to 2013 sucessfully, this site is enable anonymous access
2) Installed SQLSERVER2008_ASADOMD10
3) added performance point service application pool account as a db_owner and data read access permission to content database and added permission to unattended service account to SSAS server .
3) and after i was able to connect to SSAS data soruces.
here when i open dashboards with administrator user , this user able to view dashboards
but when external user able to view dashboards it asking authentication and throws error.
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 3/15/2015 11:59:02 AM
Event ID: 1101
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: TSharepint2013.test.com
Description:
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this
problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>1101</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-03-15T08:59:02.151586300Z" />
<EventRecordID>149327</EventRecordID>
<Correlation ActivityID="{54EDF29C-9842-C025-E404-2869814A5DF0}" />
<Execution ProcessID="8120" ThreadID="7816" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
<Data Name="string1">An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.</Data>
</EventData>
</Event>
adil -
Performance Point Services - Unable to connect to site from Dashboard designer
Recently we moved the Reports site collection from one environment to other. So the Performance point content is also copied.Now I wanted to change the report paths that were deployed using Performance point services. When I try to open the report file from
perforamnce pointcontent list it shows unexpected error. If I am trying to connect to the using Dashboard designer it says URL is not available does not reference Sharepoint Site or you do not have permissions to connect.
Pleasee see the attached file for more details.
How do the reports be fixed when they are to be deployed using Performance point services(Dashboard designer). Unfortunately we do not have the dashboard designer ddwx file with us. Its been developed by vendor and they have not given us.
How should the Dashboard reports(SSRS Report ) be moved from one environment to other.What is the best way to move the performance point dashboards from one environment to other.
Environment- Sharepoint 2010At both site-collection level and web application level you need to enable SharePoint designer. Did you do that ?
http://blogs.msdn.com/b/mcsnoiwb/archive/2010/07/01/locking-down-sharepoint-designer-2010.aspx
Opening site in SP Designer also needs WebDAV to be enabled on the web front end servers. If the problem still persists, simultaneously open up fiddler and see what's the error message you are getting. That may give you some clue to proceed
Please mark the replies as answers if they help or unmark if not. -
Hi
We have copied our Project Server 2010 production databases to development server. We have few reports created by using Performance Point Services, but here when we try to open the reports the data source is pointing towards production data source
instead of dev.
We are getting some issue while executing the reports
Request you to let me know what exactly the cause and steps to rectify the issue.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.As you have copied data from Prod to Dev reports are pointing to production data sources and reports are unable to display data. Whenever we copy the data from one environment to other then this kind if issue occurs.
We need to modify the data source of all the reports manually so that report point to dev data source.
You have to open data source for your reports and change it from prod to dev then reports will display correct data.
http://blogs.msdn.com/b/performancepoint/archive/2011/09/19/performancepoint-data-connection-libraries-and-content-lists-in-sharepoint.aspx
http://www.networkworld.com/community/node/57687
kirtesh -
Performance Point Services vs Reporting Services
I am using Reporting Service in SharePoint 2013 Enterprise Version.Now i have to create a POC for Performance Point Service.I want to know in which scenerios i can use Performance Point Service instead of reporting service,Please suggest me the article which
differentiate between both the serviesIn short, SSRS is great for drill-down (matrix) reports and free-form reports, PPS is great for building dashboards, KPIs and predictive reports. Also see:
http://www.mssqltips.com/sqlservertip/2737/sql-server-reporting-services-vs-performancepoint-services/
http://businessintelligist.com/2012/04/02/comparing-performancepoint-powerview-excel-services-and-reporting-services/
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
Configure Business intelligence site and performance point services
Hi
i created a new Business intelligence site in my web application and after that how i configure performance point service.
and below Configuration is needed?
1- Configure the secure store service
2- Create service application
3- Start PerformancePoint Service
4- Configure Excel Services and SQL Server Reporting Services integration
adilHi,
According to your post, my understanding is that you wanted to configure PerformancePoint Services in SharePoint 2010.
In order to use PerformancePoint Services in Microsoft SharePoint Server 2010, you need to configure a PerformancePoint Services service application. Once you have created the service application, you need to provide data access to the users. This can be done
by using the unattended service account, or by configuring Kerberos delegation.
You can follow the steps as below to configure PerformancePoint Services.
1. Create and configure a PerformancePoint Services service application:
• Configure the PerformancePoint Services application pool account
• Start the PerformancePoint service
• Create a PerformancePoint Services service application
• Configure service application associations
2. Configure the unattended service account for PerformancePoint Services:
• Configure the secure store service
• Configure the unattended service account
• Grant that account access to your data sources
For more information, you can refer to:
http://technet.microsoft.com/library/ee748643(office.14).aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Performance point services error
We are trying to configure performance point services in our environment.
We have successfully setup the secure store service and after that performance point service but still if we browse the site and start the dashboard designer, we are getting below error:
"an error has occurred attempting to contact the specified sharepoint site dashboard designer"
We have configured our web application with classic mode authentication. Do we need claims based authentication for this?
Thanks in advance.Hope you followed below steps properly
http://www.dotnetcurry.com/showarticle.aspx?ID=650
Also check if below helps
http://blogs.msdn.com/b/mcsukbi/archive/2011/11/26/bi-service-applications-in-sharepoint-2010-authentication-classic-vs-claims-and-identity-delegation-kerberos-part-5.aspx -
Performance point service errors in share point wfe servers event viewer
HI
i am facing a problem in performance point service , i seen two errors in event viewer of a sharepoint wfe server
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue:
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display.
Error code "Services PerformancePoint" is 20700.
2 error)
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 02/09/35 01:11:41 م
Event ID: 39
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: XYZWFE02.XYZportal.com
Description:
A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application is configured to
a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>39</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-29T10:11:41.385108100Z" />
<EventRecordID>1422377</EventRecordID>
<Correlation ActivityID="{D707EAF7-6A6A-45FA-AF83-77DC3231B658}" />
<Execution ProcessID="18236" ThreadID="19172" />
<Channel>Application</Channel>
<Computer>XYZWFE02.XYZportal.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
</EventData>
</Event>
adilHi
also below error is coming in eventy viewer of wfe servers
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 03/09/35 02:25:26
م
Event ID: 39
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: XYZWFE02.XYZportal.com
Description:
A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>39</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-30T11:25:26.997772700Z" />
<EventRecordID>1425270</EventRecordID>
<Correlation ActivityID="{EB0C99EA-5B6A-4001-9D9B-C91FF779CD4B}" />
<Execution ProcessID="6736" ThreadID="15788" />
<Channel>Application</Channel>
<Computer>XYZWFE02.XYZportal.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
</EventData>
</Event>
adil -
Performance Point Service Filter Reset on button click?
Hi.
Is it possible to reset the PPS filter on button click (Common "Reset" button).
Is it possible to do by using Javascript?
I need some work around to achieve it.
Thanks & Regards
Poomani SankaranHi,
According to your post, my understanding is that you want to reset Performance Point Service Filter on button click.
You can follow the article
SharePoint Dashboard with Common Filters using PerformancePoint Services 2010 to create a dashboard with common filters using SharePoint PerformacePoint services 2010 and SQL Server Analysis Services (SSAS) Data Source.
Then you will see the filters on top of your dashboard. You can change the filters and see that both the reports are rendering the data as per your filter choice.
If you'd like to default the filter to a particular value on page load, you might want to try a JavaScript based approach:
Define the function 'NotifyBrowserOfAsyncUpdate(elem)', which PPS will call after any PPS render request completes (i.e., when your filter renders).
Within the function, check that elem.control exists and then check that elem.control.webPartTitle equals your filter's title.
If it does, search elem (the filter web part's main container DIV) for the actual filter control and change the value. If you're using a dropdown, this is pretty simple - just remember to call the 'onchange' method on the select as well so that connected
PPS objects refresh.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/61939/default-pps-filter-for-pps-dashboard-in-sharepoint-2010-not-showing
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Hi,
How to Drill Down the Analytic Chart on Double Click on the chart bar in SharePoint Performance Point Service.
Double-clicking on a Analytic chart element to drill down to the next level Performance Point Service.
I have connected with Cube. I am working in SharePoint 2010.
Thanks & Regards
Poomani SankaranIt has to do with the order you enter the fields in the Business Model from Physical model! It must be the opposite way than the one you want them to be show. In your case, you must first delete both fields from your business model, then drag tham in with first the "name" field and then the "code" field.
It did work for me! -
Build XML for Custom Nested Accordian (like Tree View Structure) for SharePoint List Data
Expected output in Xml:
<?xml version="1.0" encoding="utf-8" ?>
- <TopRoot>
- <Root id="1" Name="Department">
- <Type id="2" Name="IT">
- <SubType id="3" Name="Technology">
<SubSubType id="4" Name="Sharepoint" />
<SubSubType id="5" Name="ASP.NET" />
<SubSubType id="6" Name="HTML 5" />
</SubType>
</Type>
</Root>
</TopRoot>
List Details:
list details for storing category / sub category data and code to build tree structure for the same.
1.Create Custom List named “CategoryDetails”:
2.Create Column “Category Name” of type single line of text. Make it as required field and check Yes for Enforce Unique values.
3.Create column “Parent Category” of type lookup. under Additional Column Settings.
Get information dropdown, select “CategoryDetails”.
4.Choice column ["SRTypeName"] 1.Root,2.SRTYPE,3.SubSRTYPE, 4.SUBSUBSRTYPE
In this column dropdown, select “Category Name”:
Referance:
http://www.codeproject.com/Tips/627580/Build-Tree-View-Structure-for-SharePoint-List-Data -fine but don't want tree view just generate xml string
i just follwed above link it work perferfectly fine for building tree view but i don't want server control.
Expected Result:
My ultimate goal is to generate xml string like above format without building tree view.
I want to generate xml using web service and using xml i could convert into nested Tree View Accordian in html.
I developed some code but its not working to generate xml /string.
My modified Code:
public const string DYNAMIC_CAML_QUERY =
"<Where><IsNull><FieldRef Name='{0}' /></IsNull></Where>";
public const string DYNAMIC_CAML_QUERY_GET_CHILD_NODE =
"<Where><Eq><FieldRef Name='{0}' /><Value Type='LookupMulti'>{1}</Value></Eq></Where>";
protected void Page_Load(object sender, EventArgs e)
if (!Page.IsPostBack)
string TreeViewStr= BuildTree();
Literal1.Text = TreeViewStr;
StringBuilder sbRoot= new StringBuilder();
protected string BuildTree()
SPList TasksList;
SPQuery objSPQuery;
StringBuilder Query = new StringBuilder();
SPListItemCollection objItems;
string DisplayColumn = string.Empty;
string Title = string.Empty;
string[] valueArray = null;
try
using (SPSite site = new SPSite(SPContext.Current.Web.Url))
using (SPWeb web = site.OpenWeb())
TasksList = SPContext.Current.Web.Lists["Service"];
if (TasksList != null)
objSPQuery = new SPQuery();
Query.Append(String.Format(DYNAMIC_CAML_QUERY, "Parent_x0020_Service_x0020_Id"));
objSPQuery.Query = Query.ToString();
objItems = TasksList.GetItems(objSPQuery);
if (objItems != null && objItems.Count > 0)
foreach (SPListItem objItem in objItems)
DisplayColumn = Convert.ToString(objItem["Title"]);
Title = Convert.ToString(objItem["Title"]);
int rootId=objItem["ID"].ToString();
sbRoot.Append("<Root id="+rootId+"
Name="+Title+">");
string SRAndSUBSRTpe = CreateTree(Title, valueArray,
null, DisplayColumn, objItem["ID"].ToString());
sbRoot.Append(SRAndSUBSRTpe);
SRType.Clear();//make SRType Empty
strhtml.Clear();
SRType.Append("</Root>");
catch (Exception ex)
throw ex;
return SRType.ToString();
StringBuilder strhtml = new StringBuilder();
private string CreateTree(string RootNode, string[] valueArray,
List<SPListItem> objNodeCollection, string DisplayValue, string KeyValue)
try
strhtml.Appends(GetSRType(KeyValue, valueArray, objNodeCollection);
catch (Exception ex)
throw ex;
return strhtml;
StringBuilder SRType = new StringBuilder();
private string GetSRType(string RootNode,
string[] valueArray, List<SPListItem> objListItemColn)
SPQuery objSPQuery;
SPListItemCollection objItems = null;
List<SPListItem> objNodeListItems = new List<SPListItem>();
objSPQuery = new SPQuery();
string objNodeTitle = string.Empty;
string objLookupColumn = string.Empty;
StringBuilder Query = new StringBuilder();
SPList objTaskList;
SPField spField;
string objKeyColumn;
string SrTypeCategory;
try
objTaskList = SPContext.Current.Web.Lists["Service"];
objLookupColumn = "Parent_x0020_Service_x0020_Id";//objTreeViewControlField.ParentLookup;
Query.Append(String.Format
(DYNAMIC_CAML_QUERY_GET_CHILD_NODE, objLookupColumn, RootNode));
objSPQuery.Query = Query.ToString();
objItems = objTaskList.GetItems(objSPQuery);
foreach (SPListItem objItem in objItems)
objNodeListItems.Add(objItem);
if (objNodeListItems != null && objNodeListItems.Count > 0)
foreach (SPListItem objItem in objNodeListItems)
RootNode = Convert.ToString(objItem["Title"]);
objKeyColumn = Convert.ToString(objItem["ID"]);
objNodeTitle = Convert.ToString(objItem["Title"]);
SrTypeCategory= Convert.ToString(objItem["SRTypeName"]);
if(SrTypeCategory =="SRtYpe")
SRType.Append("<Type id="+objKeyColumn+" Name="+RootNode+ ">");
if (!String.IsNullOrEmpty(objNodeTitle))
SRType.Append(GetSRType(objKeyColumn, valueArray, objListItemColn));
if(SrTypeCategory =="SRSubTYpe")
SRType.Append("<SRSubType id="+objKeyColumn+" Name="+RootNode+
">");
if (!String.IsNullOrEmpty(objNodeTitle))
SRType.Append(GetSRType(objKeyColumn, valueArray, objListItemColn));
if(SrTypeCategory =="SubSubTYpe")
SRType.Append("<SubSubType id="+objKeyColumn+" Name="+RootNode +"
></SubSubType");
SRType.Append("</SubType>");
SRType.Append("</Type>");
catch (Exception ex)
throw ex;
return SRType.ToString();
// Call method again (recursion) to get the child itemsHi,
According to your post, my understanding is that you want to custom action for context menu in "Site Content and Structure" in SharePoint 2010.
In "SiteManager.aspx", SharePoint use MenuItemTemplate class which represent a control that creates an item in a drop-down menu.
For example, to create or delete the ECB menu for a list item in
"Site Content and Structure", we can follow the steps below:
To add the “My Like” menu, we can add the code below:
<SharePoint:MenuItemTemplate
UseShortId=false
id="OLListItemLike"
runat="server"
Text="My Like"
ImageUrl="/_layouts/images/DelItem.gif"
ClientOnClickNavigateUrl="https://www.google.com.hk/"
/>
To remove the “Delete” menu, we can comment the code below:
<SharePoint:MenuItemTemplate
UseShortId=false
id="OLListItemDelete"
runat="server"
Text="<%$Resources:cms,SmtDelete%>"
ImageUrl="/_layouts/images/DelItem.gif"
ClientOnClickScript="%SmtObjectDeleteScript%"
/>
The result is as below:
More information:
MenuItemTemplate Class (Microsoft.SharePoint.WebControls)
MenuItemTemplate.ClientOnClickScript property (Microsoft.SharePoint.WebControls)
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How to enable "SelectAll " in MultiSelect MDX filter in Performance Point Services 2010
Hi,
I have multi select MDX filter in Performance Point Services 2010. I need all the values of the filter to be selected by default. i.e when the page is loaded for the first time, all the values in the multi select filter should be selected.
Is there any property enabled for this? Any other solution can be achieved?
Kindly help.
Regards,
ManiAt least I haven't managed to alter the display value. It uses the member name directly.
The only thing that comes to mind is creating a user hierarchy, so that countries and states can be shown as a tree in the filter. -
Performance Point Services Data Source Sql Server Table.
Hi,
I have a requirement where I need to create a matrix report which shows resource capacity and deomand fromProject Server 2010 databases which involves joining of multiple tables and views from the database.
But in Performance Point Service 2010 I am not able to write query to join multiple tables it'sjust showing one option in Data Connection to create connection to a database and specific one table not like SSRS where we can connect to database and can query
multiple tables and views to render the report as required.
So can any body suggest in case I am missing something in PPS 2010 or we cant joing or write sql query in PPS 2010
ThanksI would join the tables in a view as Regis suggested or simply pull the information into a PowerPivot model and use that in SharePoint to connect to in PPS. If you go that route then you will be able to use a multidimensional source and can create
Analytical Reports.
http://denglishbi.wordpress.com/2011/01/03/using-powerpivot-with-performancepoint-services-pps-2010/
http://denglishbi.wordpress.com/2012/02/09/using-performancepoint-services-pps-with-powerpivot-sql-server-2012-rc0/ -
How to create a public view for sharepoint list A and deploy this view to specific user personal view? Is that possible OOTB?
Views cannot be exported or moved. Can you elaborate your requirement?
--Cheers
Maybe you are looking for
-
Scratch Disc Questions using Firewire External Drive & Imac
Hello. I've read through the existing questions regarding scratch disc and Photoshop, yet can't seem to find an answer to my questions. I would greatly appreciate any tips/advice. Here is my setup and situation: I am running an iMac with a 2.16 intel
-
Has anyone tried Displayport to VGA adaptor for T410S?
I found Displayport to VGA cable for T410S on Lenovo site. Lenovo DisplayPort to VGA Monitor Cable 57Y4393 I just wonder if DP can directly transfer to analog port? Has anyone tried this? Solved! Go to Solution.
-
How to move a virtual disk's physical allocation within a Storage Pool
I have a pool of 3x500GB where one the physical drives is having intermittent issues. Currently, there is only one parity Virtual Disk of 300GB Fixed across 3 columns. I want to replace the bad drive with a good one. The old way (pre-2012) was replac
-
Inappropriate mouse event coordinates in the WebKit of HTMLLoader/StageWebView
Hi, We have a desktp application which incorporates an HTMLRichTextEditor (implemented in HTML/JS and loaded into AIR). We have run into a big problem with text selection though. It seems that the both the HTMLLoader and the StageWebView are passing
-
Control Hints, various languages????? 9.0.3
Hi, how can i set the control hints for an attribute for various languages. in jdev 9.0.2 it was very easy but in jdev 9.0.3 pre?????? Pleas help Thanks Achim