Performance problem ECC / CRM WebUi

I have a performance problem when using CRM functionality FCC (a http i.e. bsp) aplication which makes a query in ECC system.(two systems are in different networks)
In real life user is waiting for response in CRM BSP like 60 seconds(really too much)
At CRM side:
When I look at CRM for overall dialog avg. response time is 806 ms with avg roll wait time is 436ms.
When I look at CRM for overall HTTP avg. response time is 244 ms with avg roll wait time is 194ms.
At ECC side:avg RFC(only there I can identify specified user with high times) response time for user is 7.577ms with a quite high DB avg response time 6310ms.
Generaly this is a big ECC system with avg dialog response time 612ms(and no other user complains)
How to improove this situation. Is the problem in ECC system ,CRM system or network? Would moving CRM system in ECC network improove performance dramatically or something else.
Should you need any other info do not hesitate

Thank you Juan
I wander do we neeed some more data to find main cause for performance problems.
I can organise moving CRM to ECC network(this engages many people of three company and downtime).
However if this does not bring significant improovment I will be "killled".
What to check to see main cause for performance problems

Similar Messages

Problem in CRM WEBUI

Hi,
I am on CRM WEBUI. When I click on any of the buttons on WEBUI, after a while, it is showing a blank page, instead of required page. However if I click on back button, then it is showing the required page.
This is happening very sporadically. I am not able to undertstand the reason.
Could you please let me know, any settings I need to do to avoid this problem. (CRM Settings or Internet settings).
Thanks in advance for all the responses.
Thanks,
Sandeep

Hello Sandeep,
Please have a look at note 1244321 which contains the general information on analysing WEBUI problems.
Please also try to get a HTTP trace of the problem which would be helpful on analysing.
There was the similar case which was caused by network.
Best regards,
Maggie

How to Add an standard ECC field to CRM WebUI

Hi everybody.
I've an issue with a task, the problem is on the implementation of CRM they are using the sales order from ECC on the CRM webUI as we know CRM has already a block of standard fieds from R3 on the ERP components, can anybody knows how do I can ADD or make an enhacement for one other standard field. I need to maintain field bstdk_e from CRM webIU.
Regards.

Hi,
my actual problem is a problem in Adobe Designer. I will describe it with scrreenshots. It's about a text field that needs to be added to a table.
That's what I want:
Link: [http://i749.photobucket.com/albums/xx135/Micha_AB/SAP_should.jpg]
In form SD_BIL_LIST_FORM01 the text field EX_CONDITIONS is part of table HEADER_CONDITIONS
That's how it is now in my form:
Link: [http://i749.photobucket.com/albums/xx135/Micha_AB/SAP_is.jpg]
So what I want is to make the text field SHOW_MULTI_MIERALS be part of table Table_Multi_Minerals. But if I try to drag and drop the fext field into the table the system does not do it although it seems that I sould be possible (the black Drop line appears).
Regards, Michael

CRM IC Webclient - Massive Performance Problems Searching in Agent Inbox

Hi Forum,
can somebody help me. We have massive Search Performance problems in Interaction Center Webclient in Agent Inbox. When agents searching, for example for open emails, the time to get a result takes approx. 2-3 minutes.
Thats absolute inadmissible and endangered the running business.
The queury reading the eMails from the workitem tables is very very slow.
Could somebody help me with ideas to solve this big performance problem. Have somebody the same problems?
Thank you very much in advance for any information.
We use Interaction Center Webclient on CRM Release 5.0
Thorsten

Another aspect you could check is the following:
Analysis performed didn't show anything strange nor any high consumers
of the response time. The processing time occurs, since IC-Web on CRM 5
is a bit demanding for CPU power.
The only thing that could improve the performance a bit is the
<b>buffering of org structure</b>, which is currently switched off for
SALES and SERVICE scenarios as per table T77OMATTSC.
The report <b>HRBCI_ATTRIBUTES_BUFFER_UPDATE</b> is running regulary
however no scenario is being placed in the buffer to speed up
org structure read. Please check this and provide feedback.
How to use this report, can be found back in the Reports own documentation and also in SAP HELP.
cheers
Davy

Call the ECC transcation like sales oredr(va01) in CRM Webui through transc

Hi CRM Experts,
I want call the ECC transcation like sales oredr(va01) in CRM Webui through transcation launcher ?how i can do this ?

Hi Mahadevi
you can find couple of Blogs and wikis on SDN forum for this.
Please go through with below links.
CRM 2007 How to --2 A( Transaction Launcher)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true
Thanks
Chand

Custom object in work flow not opening in CRM webui

Hi,
I have designed a workflow in SAP Ecc 6.0 CRM.
There are some work items and a single custom popup screen in this workflow.
This popup screen is used to get data and pass to the subsequent workitem.
This screen opens in SAP CRM in the workflow inbox (SBWP) , and works as expected.
Also, mails are sent to the SAP user IDs of the concerned people through the workflow (as per process).
At this stage, we have done all settings reqd in SWU3.
However, when this entire workflow process is trigerred using the CRM WEBUI, the following problems occur:
1) There are no mails received at any stage in the workflow inbox.
2) When the work item for the popup screen appears in the WebUI workflow inbox, and it is clicked, there is an error.
"Associated object cannot be opened. Contact your system administrator"
So, the customised pop-up does not open in this CRM WEBUI workflow inbox at all.
Question:
1) How do we ensure that the mails are received in the CRM WEBUI workflow inbox? Are there any settings to be done for that?
2) How can we make the custom popup open in the CRM WEBUI workflow inbox?
Regards,
Sachin

Hi,
Please check IMG path.
The path CRM->Basic functions->Worklists->Define Alert Inbox and Workflow Inbox->Define Object-Specific Navigation
Input like
BOR Your_Object Your_Method BT_XXX OPEN
Hope it work.
Deripmav

BP telephone pulled out from another BP in CRM webui

Dear Experts:
When I created a bp through CRM webui 7.0, I maintained the general address info. and saved it. after that, I accessed the address details section by clicking on address assignment block in order to add the phone and email info. however, the fields had been already filled with the phone and email info. from another BP which I have created right before this BP. it should be blank before adding any data. It seems like the second BP's address detail view still pointed to that of the last BP I have created prior to this one. However, if I logoff from webui and logon back, it is blank and looks right. Is ther any advise?
Thanks

Hello,
Perhaps you could check if the BSP component view BP_ADDR/StandardAddress has been enhanced in your system. If so, see if the getter for TELEPHONE of the model node for BuilStandardAddress is available.
If this method has been enhanced, it is possible there is an error in the code. Possibly, casting the property access to an object of CL_CRM_BOL_ENTITY and calling the REREAD( ) method could solve your problem.
Kind regards,
Tom.

Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEV

Dear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene

Is it possible to maintain customers in both ECC & CRM?

Hi,
We have ECC 6.0 as the leading system for creating customers and they replicate to CRM 5.0
But one certain group of customers alone will be created in CRM and replicated to ECC. These customers then have to be maintained in ECC and those changes have to flowback to CRM. I am guessing this is available in the standard functionality of SAP ECC & CRM (creating in one system and maintaining in another). Will there be any issues in doing this?
Can you guys foresee any problems in this method?
Thanks,
Max

Hi,
As long as the Number range used in both system is the same, there should be no problem in doing so....
Sharif

Performance Monitoring in CRM

Hi All,
I need your help to know how to tune performance in CRM 7.0. I need to tune the performance of Web UI client & get the response time of transactions executed in CRM UI,
Please give your suggestions,
Thanks & Regards,
Sandipan

Hello,
If you want to do performance analysis on the WebUI in CRM 7.0 (does not work on earlier versions) just hit the keys CTRLSHIFTF7 in any WebUI window. In the current window a frame will appear in the upper right corner indicating the backend processing time, frontend processing time and so on.
Hope this is what you're looking for.
Kind regards,
Joost

Performances Problem in XI using RFC

Hi All,
I have some doubts about XI performance:
Does anybody knows if there is any
performance restrictions to do RFC calls to XI ?
What's the best performance Solution in XI ?
iDoc Adpater or RFC Adapter, File Adapter or RFC Adapter ?
Is it possible that something in Mapping
causes performance problem ?
Thanks

Hi
You need to create the Type H RFC in PI system pointing to ECC and reverse in ECC system pointing to PI.
Create the RFC and test. When you test connection it will show error because of empty message but this will work fine for the Proxy with Data.
Thanks
Gaurav

NWDI Performance Problems

Hello Experts!
We have enormous performance problems with our NWDI.
Our NWDI is runnning on a SAP Solution-Manager System (Double - Stack - System).
NWDI is running on the Java-Stack of our Solution Manager.
First of all I have created a new TRACK in CMS with the following Software-Components:
SAP_BUILD 7.30, SAP_ENGFACADE 7.30.
When I want to import these Software-Components at the tabs "Development" and "Consolidation", it takes about 15 minutes to import each Software-Component.
After 15 MInutes, I get a exception, called "Lock Exception".
com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread impl:3 15 failed to acquire exclusive lock on client session ClientSession(id=(xxxxxxxxXXX_XX)IDXXXXX). Existing locks: LockingManager(ThreadName:SAPEngine_Application_Threadimpl:3_15, exclusive client session lock: ClientSessionLock(SAPEngine_Application_Thread impl:3_37), shared client session locks: ClientSessionSharedLockManager(), app session locks: ApplicationSessionLockManager(), current request: sap.com/tcSLCMS~WebUI/Cms).Hint: Take a thread dump of the server node to find the blocking thread that causes the problem.
I searched in the SDN for solving this problem and found out, that the problem is described in SAP Note 1234847.
First of all, I will restart the J2EE of our Solution Manager this evening....
Do you think that helps or is it useless to restart the J2EE?
Thank you very much for helping.
Best Reagards.

Hello Ervin.
I have contected my SAP-Basis....
First of all, I would like to give you a more detailled overview about our landscape:
- SAP Soluation Manager 7.01 SPS27, Dual-Stack-System
- Installed Products:
+ ABAP-Stack: Solution Manager
+ Java-Stack: SLD, NWDI
Our ABAP-Stack is on SP8, our Java-Stack on SP8, too.
As you know is the SP-Level of DI_CMS, DI_CBS and DI_DTR on SP10,
the whole rest of the Java-Stack-Software-Compoents is on SP8.
So:
Our SAP-Basis only wants to udgrade the Java-Stack from SP8 to SP10, not the ABAP-Stack
My Question now is the following:
Are there any risks / is it adisable to patch only the Java-Stack from SP8 to SP10 and not both Stacks from SP8 to SP10 ?
If you know the answer, please could you give me an evidence, which I can send to my SAP-Basis?
Thank you very much for helping.
Best Regards.

Changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)

Hello
Maybe not the best section ..
But we have in mind changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)..
I wander what would be pro and what cons?
Thank you a lot
Jan

Hi Jan,
If I understand correctly you are going to perform database migration activity in your present landscape. Firstly you have to contact SAP as well as one of the third party hardware vendor (who is going to provide certified HANA hardware). SAP will provide you all the license details.
For whole your migration activity below link will be helpful:-
SAP BW on HANA Cookbook
Migration to HANA made easy with DMO
Regards,
Rafikul

CRM WebUI & IE9

Does anyone when IE9 would be supported for CRM WebUI (v7)?

I fear I can only concur with Stephen. As for IE8 it is officially supported from CRM7 EHP1 and onwards. For all I see EHP1 is still in ramp up and not publicly available. On this base I would probably estimate middle of 2012 for an official "Supported by SAP".
For all those people yelling "I work with IE8 on CRM 6": Yes, you can do that. With some of the later SPs SAP adjusted their code to put IE8 automatically to "compatibility mode". But for the "real" IE8 it still is not supported.
Just a remark: A colleague of mine started working with IE9 on a CRM7 EHP1 lately. Some of the fields in the e-mail view (BT126H_MAIL) are off. Seems to be an issue with the JavaScript used in there. The rest seems quite fine. Did not have the chance to try myself by now.
On another note: Firefox 4 is performing like a beast. On a good server it makes me feel as if I am running a local application. (And it got resizing text boxes )
cheers Carsten

PL/SQL Performance problem

I am facing a performance problem with my current application (PL/SQL packaged procedure)
My application takes data from 4 temporary tables, does a lot of validation and
puts them into permanent tables.(updates if present else inserts)
One of the temporary tables is parent table and can have 0 or more rows in
the other tables.
I have analyzed all my tables and indexes and checked all my SQLs
They all seem to be using the indexes correctly.
There are 1.6 million records combined in all 4 tables.
I am using Oracle 8i.
How do I determine what is causing the problem and which part is taking time.
Please help.
The skeleton of the code which we have written looks like this
MAIN LOOP ( 255308 records)-- Parent temporary table
-----lots of validation-----
update permanent_table1
if sql%rowcount = 0 then
insert into permanent_table1
Loop2 (0-5 records)-- child temporary table1
-----lots of validation-----
update permanent_table2
if sql%rowcount = 0 then
insert into permanent_table2
end loop2
Loop3 (0-5 records)-- child temporary table2
-----lots of validation-----
update permanent_table3
if sql%rowcount = 0 then
insert into permanent_table3
end loop3
Loop4 (0-5 records)-- child temporary table3
-----lots of validation-----
update permanent_table4
if sql%rowcount = 0 then
insert into permanent_table4
end loop4
-- COMMIT after every 3000 records
END MAIN LOOP
Thanks
Ashwin N.

Do this intead of ditching the PL/SQL.
DECLARE
TYPE NumTab IS TABLE OF NUMBER(4) INDEX BY BINARY_INTEGER;
TYPE NameTab IS TABLE OF CHAR(15) INDEX BY BINARY_INTEGER;
pnums NumTab;
pnames NameTab;
t1 NUMBER(5);
t2 NUMBER(5);
t3 NUMBER(5);
BEGIN
FOR j IN 1..5000 LOOP -- load index-by tables
pnums(j) := j;
pnames(j) := 'Part No. ' || TO_CHAR(j);
END LOOP;
t1 := dbms_utility.get_time;
FOR i IN 1..5000 LOOP -- use FOR loop
INSERT INTO parts VALUES (pnums(i), pnames(i));
END LOOP;
t2 := dbms_utility.get_time;
FORALL i IN 1..5000 -- use FORALL statement
INSERT INTO parts VALUES (pnums(i), pnames(i));
get_time(t3);
dbms_output.put_line('Execution Time (secs)');
dbms_output.put_line('---------------------');
dbms_output.put_line('FOR loop: ' || TO_CHAR(t2 - t1));
dbms_output.put_line('FORALL: ' || TO_CHAR(t3 - t2));
END;
Try this link, http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/05_colls.htm#23723

Performance problem ECC / CRM WebUi

Similar Messages

Maybe you are looking for