Performance Problem in Report built on a DSO
Dear All,
we had a report created on the top of the ODS(0sd_o06) with selection criterion as profit center,now when we click the profit center varible entry to see the selection, a window pop up and it is there for 30 mins after that only we can make any selection ,request you to tell me the solution to improve the performance of the variable input.
I had chked all the parameters and implement it but no improvement
hello,
1)the sid generation check box is ticked.
2)the oprofit_ctr is already set to read data from Master data for filter value selection.and about navigational attribute we are using only four navigational attribute.
3) turn on the cache in RSRT for the query built on DSO.
4)Index is also created in the dso, Plzz help to improve the performance.
Thanks,
I believe your problem is with variable selection of 0profit_c... that values are shown after 30 mins for selection. Settings at ODS / DSO will not help.
You need to look at the setting of list of value of this field and then if need be create idexes etc on that particular infoobjects. I remember there are settings like all the values, values in DSO etc. try those may help.
Regards
Vikash
Similar Messages
-
Hi Guys,
I have a problem with performance in report, not exactly in report but in one of filter of it, I have a vision that the name is "Input a cliente", i can surf in everthing, i can filter other visions in report but when I try to make a filter using "Input a cliente" i can't do this because the screen don't open for me and some minutes after appear the message "Time out", somebody have this problem in the report?Hi KJ, I have a lot of record in the info provider....because all of my customer are there and I have a lot of customer.....when I trie do do the drill down I search in the customer hierarchy, so I have too record to look, its the reason that I can't to make a filter in this vision, I need to know how Can I solve this problem, can yo help me?
-
Performance problem with report query
Hi,
I am encountering a performance issue with a page returning a report.
I have a page that has a region which joins 2 tables. One table has about 220,00 rows, while the other contains roughly 60,000 rows. In the region source of the report region, the query includes join condition with local variables. For example, the page is page 70, and some join conditions are:
and a.id=:P70_ID
and a.name like :P70_NAME
I run the query that returns a large number of rows from sqlplus, and it takes less than 30 sec to complete.
When I run the page, the report took about 3 minutes to return.
In this case, :P70_NAME is initialized to '%' on the page.
I then tried to substitute variable value directly in the query:
and a.id=1000
and a.name like '%'
this time the report returned in about 30 sec.
I then tried another thing which specified the region as "PL/SQL Function returning sql query", and modified the region as follows:
l_sql := '.......';
l_sql := l_sql || 'and a.id=' || v('P70_ID')
and similar substituting :P70_NAME to v('P70_NAME') and append its value to the l_sql string.
The report query page also returned in 30 sec.
Is there any known performance issue with using the bind variable (:PXX_XXX) in the report region?If you are able.. flush the shared_pool, run your
report then query the v$sql_area or v$sql_text tables.
Or do a google query and look up Cary Milsap's piece on enabling extended trace .. there is your sure fire way of finding the problem sql. I am still learning htmldb but is there a way to alter session enable trace in some pre-query block? -
Performance problem, statspack report included.
HI,
on my 9.2.0.8 cpu_count=12 EE I've got job which takes 5h , there is strange top sql reported:
STATSPACK report for
DB Name DB Id Instance Inst Num Release Cluster Host
E1 2020101010 E1 1 9.2.0.8.0 NO test1
Snap Id Snap Time Sessions Curs/Sess Comment
Begin Snap: 56073 22-Mar-10 15:00:04 35 5.7
End Snap: 56078 22-Mar-10 20:00:04 38 5.6
Elapsed: 300.00 (mins)
Cache Sizes (end)
~~~~~~~~~~~~~~~~~
Buffer Cache: 1,024M Std Block Size: 8K
Shared Pool Size: 320M Log Buffer: 2,000K
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 141,422.83 23,063.29
Logical reads: 21,928.15 3,576.05
Block changes: 695.89 113.49
Physical reads: 424.41 69.21
Physical writes: 36.35 5.93
User calls: 21.19 3.46
Parses: 115.96 18.91
Hard parses: 1.41 0.23
Sorts: 28.80 4.70
Logons: 0.14 0.02
Executes: 5,099.90 831.69
Transactions: 6.13
% Blocks changed per Read: 3.17 Recursive Call %: 99.86
Rollback per transaction %: 0.00 Rows per Sort: 3.88
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 98.07 In-memory Sort %: 100.00
Library Hit %: 99.43 Soft Parse %: 98.78
Execute to Parse %: 97.73 Latch Hit %: 100.00
Parse CPU to Parse Elapsd %: 39.63 % Non-Parse CPU: 99.50
Shared Pool Statistics Begin End
Memory Usage %: 19.64 94.21
% SQL with executions>1: 73.59 14.19
% Memory for SQL w/exec>1: 63.89 9.21
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
CPU time 10,436 78.98
db file sequential read 231,010 1,484 11.23
db file scattered read 333,736 733 5.55
log file sync 67,760 206 1.56
db file parallel write 63,946 204 1.54
^LWait Events for DB: E1 Instance: E1 Snaps: 56073 -56078
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
db file sequential read 231,010 0 1,484 6 2.1
db file scattered read 333,736 0 733 2 3.0
log file sync 67,760 0 206 3 0.6
db file parallel write 63,946 0 204 3 0.6
direct path write (lob) 45,642 0 82 2 0.4
control file parallel write 7,000 0 28 4 0.1
log file parallel write 205,617 0 14 0 1.9
process startup 450 0 11 25 0.0
control file sequential read 8,068 0 8 1 0.1
log file switch completion 104 0 3 28 0.0
log buffer space 86 0 2 22 0.0
SQL*Net break/reset to clien 3,632 0 1 0 0.0
latch free 1,241 23 1 0 0.0
direct path read 3,432 0 1 0 0.0
log file single write 160 0 0 3 0.0
direct path write 2,074 0 0 0 0.0
log file sequential read 160 0 0 2 0.0
direct path read (lob) 76 0 0 3 0.0
SQL*Net message from dblink 38 0 0 4 0.0
buffer busy waits 19 0 0 4 0.0
single-task message 1 0 0 64 0.0
SQL*Net more data to client 2,493 0 0 0 0.0
LGWR wait for redo copy 369 0 0 0 0.0
library cache pin 3 0 0 0 0.0
enqueue 7 0 0 0 0.0
SQL*Net message to dblink 38 0 0 0 0.0
SQL*Net message from client 240,510 0 378,158 1572 2.2
jobq slave wait 9,559 9,475 27,883 2917 0.1
wakeup time manager 583 583 16,960 29090 0.0
SQL*Net message to client 240,514 0 0 0 2.2
SQL*Net more data from clien 2,990 0 0 0 0.0
^LBackground Wait Events for DB: E1 Instance: E1 Snaps: 56073 -56078
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
db file parallel write 63,946 0 204 3 0.6
control file parallel write 7,000 0 28 4 0.1
log file parallel write 205,617 0 14 0 1.9
control file sequential read 3,998 0 4 1 0.0
db file scattered read 237 0 1 5 0.0
db file sequential read 161 0 1 3 0.0
log file single write 160 0 0 3 0.0
direct path read 3,398 0 0 0 0.0
direct path write 2,070 0 0 0 0.0
log file sequential read 160 0 0 2 0.0
rdbms ipc reply 259 0 0 1 0.0
log buffer space 11 0 0 11 0.0
LGWR wait for redo copy 369 0 0 0 0.0
latch free 34 2 0 1 0.0
buffer busy waits 1 0 0 0 0.0
rdbms ipc message 590,267 22,981 82,922 140 5.3
pmon timer 6,288 6,288 17,570 2794 0.1
smon timer 96 50 16,604 ###### 0.0
^LSQL ordered by Gets for DB: E1 Instance: E1 Snaps: 56073 -56078
-> End Buffer Gets Threshold: 10000
-> Note that resources reported for PL/SQL includes the resources used by
all SQL statements called within the PL/SQL code. As individual SQL
statements are also reported, it is possible and valid for the summed
total % to exceed 100
CPU Elapsd
Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
385,750,162 1 385,750,162.0 97.7 ######## 15723.50 2420406373
Module: 01@ me2xml.sql
declare v_message VARCHAR2(2000); v_inserts VARC
HAR2(2000); v_voucher VARCHAR2(2000); v_vls
VARCHAR2(2000); v_posi VARCHAR2(2000); v_posih
VARCHAR2(2000); v_rep_inderts VARCHAR2(2000); begin upd
ate PARAM_SYSTEM set SYS_WARTOSC_TEKST = null where
351,634,942 87,908,729 4.0 89.1 1307.36 1617.33 4265647904
Module: 01@ posi2xml.sql
select longname from javasnm$ where short = :1
...other statements are way lowerAny ideas how can I optimize 'select longname from javasnm$ where short = :1' ?
Regards.
GregThank You , but I'm unable to reduce java calls ,because the whole code is doing xml transformations (xmlparse and xmldom).
My java pool is:
SQL> show parameters java
NAME TYPE VALUE
java_max_sessionspace_size integer 0
java_pool_size big integer 167772160
java_soft_sessionspace_limit integer 0
and my shared pool is:
SQL> show parameters shared
NAME TYPE VALUE
hi_shared_memory_address integer 0
max_shared_servers integer 20
shared_memory_address integer 0
shared_pool_reserved_size big integer 8388608
shared_pool_size big integer 335544320
shared_server_sessions integer 0
shared_servers integer 0
btw how do You know I'm using shared pool for ad-hoc queries ?
The 5h interval spans one procedure call , there is no other workload on database.
Regards.
Greg -
Performance problems with Reports 6i
Hello,
We have reports server installed on Windows NT, generating reports in html format, requested through Oracle 9iAS.
When we have approx. 20 reports being generated simultaneously, RWCGI60.exe processes start to accumulate in the task manager and do not end.
When the RWCGI60.exe started to accumulate, RWRUN60.EXE was not using any CPU time.
After some minutes, without requesting any additional reports, RWRUN60.EXE stared using 99% of CPU and evntually all the RWCGI60.exe processes were evacuated and ended.
Is there any configuration we can do to the Reports Server to handle this load?There is a maxconnect setting in reports server configuration file. The setting allows you to control how many connections the server is able to open at any time. When more cgi executables are invoked than the maxconnect, only "maxconnect" number of cgi gets connected, other cgi will get error message and quit very quickly.
If you don't want cgi to compete your machine resource, you should run reports server in separate machine.
Thanks,
-Shaun -
Performance problem with Orcacle / Crystal reports 8.5 / ASP
Hi,
I have a performance problem with reports running crystal reports 8.5 with oracle databases.
Fetching data appears to be slow. Oracle trace reports (tkprof) shows that fetchsize=1.
Fetchsize in Oracle ODBC is 15 (default).
How can I update te fetchsize in crystal reports?
I would appreciate any help.CR XI R2 is also still available for purchase. This is the last version of CR to use the RDC. Contact sales at 866-681-3435.
Make sure the installed versin is 11.5.12.1838 - if it is not, apply SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip
- Ludek
Edited by: Ludek Uher on Jan 4, 2011 10:05 AM -
Performance problem in Zstick report...
Hi Experts,
I am facing performance problem in Custoom Stock report of Material Management.
In this report i am fetching all the materials with its batches to get the desired output, at a time this report executes 36,000 plus unique combination of material and batch.
This report takes around 30 mins to execute. And this report is to be viewed regularly in every 2 hours.
To read the batch characteristics value I am using FM -> '/SAPMP/CE1_BATCH_GET_DETAIL'
Is there any way out to increase the performance of this report, the output of the report is in ALV.
May i have any refresh button in the report so that data may get refreshed automatically without executing it again. or is there any cache memory concept.
Note: I have declared all the itabs with type sorted, all the select queries are fetched with key and index.
Thanks
Rohit GharwarHello,
SE30 is old. Switch on trace on ST12 while running this progarm and identify where exactly most of the time is being spent. If you see high CPU time this problem with the ABAP code. You can exactly figure out the program/function module from ST12 trace where exactly time is being spent. If you see high database time in ST12, problem is with database related issue. So basically you have to analyze sql statement from performance traces in ST12. These could resolve your issue.
Yours Sincerely
Dileep -
SQL report performance problem
I have a SQL classic report in Apex 4.0.2 and database 11.2.0.2.0 with a performance problem.
The report is based on a PL/SQL function returning a query. The query is based on a view and pl/sql functions. The Apex parsing schema has select grant on the view only, not the underlying objects.
The generated query runs in 1-2 sec in sqlplus (logged in as the Apex parsing schema user), but takes many minutes in Apex. I have found, by monitoring the database sessions via TOAD, that the explain plan in the Apex and sqlplus sessions are very different.
The summary:
In sqlplus SELECT STATEMENT ALL_ROWS Cost: 3,695
In Apex SELECT STATEMENT ALL_ROWS Cost: 3,108,551
What could be the cause of this?
I found a blog and Metalink note about different explain plans for different users. They suggested to set optimizer_secure_view_merging='FALSE', but that didn't help.Hmmm, it runs fast again in SQL Workshop. I didn't expect that, because both the application and SQL Workshop use SYS.DBMS_SYS_SQL to parse the query.
Only the explain plan doesn't show anything.
To add: I changed the report source to the query the pl/sql function would generate, so the selects are the same in SQL Workshop and in the application. Still in the application it's horribly slow.
So, Apex does do something different in the application compared to SQL Workshop.
Edited by: InoL on Aug 5, 2011 4:50 PM -
Report program Performance problem
Hi All,
one object is taking 30hr for executing.some one develped this in 1998 but this time it is a big Performance problem.please some one helep what to do i am giving that code.
*--DOCUMENTATION--
Programe written by : 31.03.1998 .
Purpose : this programe updates the car status into the table zsdtab1
This programe is to be schedule in the backgroud periodically .
Querries can be fired on the table zsdtab1 to get the details of the
Car .
This programe looks at the changes made in the material master from
last updated date and the new entries in material master and updates
the tables zsdtab1 .
Changes in the Sales Order are not taken into account .
To get a fresh data set the value of zupddate in table ZSTATUS as
01.01.1998 . All the data will be refreshed from that date .
Program Changed on 23/7/2001 after version upgrade 46b by jyoti
Addition of New tables for Ibase
tables used -
tables : mara , " Material master
ausp , " Characteristics table .
zstatus , " Last updated status table .
zsdtab1 , " Central database table to be maintained .
vbap , " Sales order header table .
vbak , " Sales order item table .
kna1 , " Customer master .
vbrk ,
vbrp ,
bkpf ,
bseg ,
mseg ,
mkpf ,
vbpa ,
vbfa ,
t005t . " Country details tabe .
--NEW TABLES ADDEDFOR VERSION 4.6B--
tables : ibsymbol ,ibin , ibinvalues .
data : vatinn like ibsymbol-atinn , vatwrt like ibsymbol-atwrt ,
vatflv like ibsymbol-atflv .
*--types definition--
types : begin of mara_itab_type ,
matnr like mara-matnr ,
cuobf like mara-cuobf ,
end of mara_itab_type ,
begin of ausp_itab_type ,
atinn like ausp-atinn ,
atwrt like ausp-atwrt ,
atflv like ausp-atflv ,
end of ausp_itab_type .
data : mara_itab type mara_itab_type occurs 500 with header line ,
zsdtab1_itab like zsdtab1 occurs 500 with header line ,
ausp_itab type ausp_itab_type occurs 500 with header line ,
last_date type d ,
date type d .
data: length type i.
clear mara_itab . refresh mara_itab .
clear zsdtab1_itab . refresh zsdtab1_itab .
select single zupddate into last_date from zstatus
where programm = 'ZSDDET01' .
select matnr cuobf into (mara_itab-matnr , mara_itab-cuobf) from mara
where mtart eq 'FERT' or mtart = 'ZCBU'.
where MATNR IN MATERIA
and ERSDA IN C_Date
and MTART in M_TYP.
append mara_itab .
endselect .
loop at mara_itab.
clear zsdtab1_itab .
zsdtab1_itab-commno = mara_itab-matnr .
Get the detailed data into internal table ausp_itab .----------->>>
clear ausp_itab . refresh ausp_itab .
--change starts--
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ausp
where objek = mara_itab-matnr .
append ausp_itab .
endselect .
clear ausp_itab .
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ibin as a inner join ibinvalues as b
on ain_recno = bin_recno
inner join ibsymbol as c
on bsymbol_id = csymbol_id
where a~instance = mara_itab-cuobf .
append ausp_itab .
endselect .
----CHANGE ENDS HERE -
sort ausp_itab by atwrt.
loop at ausp_itab .
clear date .
case ausp_itab-atinn .
when '0000000094' .
zsdtab1_itab-model = ausp_itab-atwrt . " model .
when '0000000101' .
zsdtab1_itab-drive = ausp_itab-atwrt . " drive
when '0000000095' .
zsdtab1_itab-converter = ausp_itab-atwrt . "converter
when '0000000096' .
zsdtab1_itab-transmssn = ausp_itab-atwrt . "transmission
when '0000000097' .
zsdtab1_itab-colour = ausp_itab-atwrt . "colour
when '0000000098' .
zsdtab1_itab-ztrim = ausp_itab-atwrt . "trim
when '0000000103' .
*=========Sujit 14-Mar-2006
IF AUSP_ITAB-ATWRT(3) EQ 'WDB' OR AUSP_ITAB-ATWRT(3) EQ 'WDD'
OR AUSP_ITAB-ATWRT(3) EQ 'WDC' OR AUSP_ITAB-ATWRT(3) EQ 'KPD'.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT+3(14).
ELSE.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT . "chassis no
ENDIF.
zsdtab1_itab-chassis_no = ausp_itab-atwrt . "chassis no
*=========14-Mar-2006
when '0000000166' .
----25.05.04
length = strlen( ausp_itab-atwrt ).
if length < 15. "***aded by patil
zsdtab1_itab-engine_no = ausp_itab-atwrt . "ENGINE NO
else.
zsdtab1_itab-engine_no = ausp_itab-atwrt+13(14)."Aded on 21.05.04 patil
endif.
----25.05.04
when '0000000104' .
zsdtab1_itab-body_no = ausp_itab-atwrt . "BODY NO
when '0000000173' . "21.06.98
zsdtab1_itab-cockpit = ausp_itab-atwrt . "COCKPIT NO . "21.06.98
when '0000000102' .
zsdtab1_itab-dest = ausp_itab-atwrt . "destination
when '0000000105' .
zsdtab1_itab-airbag = ausp_itab-atwrt . "AIRBAG
when '0000000110' .
zsdtab1_itab-trailer_no = ausp_itab-atwrt . "TRAILER_NO
when '0000000109' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-fininspdat = date . "FIN INSP DATE
when '0000000108' .
zsdtab1_itab-entrydate = ausp_itab-atwrt . "ENTRY DATE
when '0000000163' .
zsdtab1_itab-regist_no = ausp_itab-atwrt . "REGIST_NO
when '0000000164' .
zsdtab1_itab-mech_key = ausp_itab-atwrt . "MECH_KEY
when '0000000165' .
zsdtab1_itab-side_ab_rt = ausp_itab-atwrt . "SIDE_AB_RT
when '0000000171' .
zsdtab1_itab-side_ab_lt = ausp_itab-atwrt . "SIDE_AB_LT
when '0000000167' .
zsdtab1_itab-elect_key = ausp_itab-atwrt . "ELECT_KEY
when '0000000168' .
zsdtab1_itab-head_lamp = ausp_itab-atwrt . "HEAD_LAMP
when '0000000169' .
zsdtab1_itab-tail_lamp = ausp_itab-atwrt . "TAIL_LAMP
when '0000000170' .
zsdtab1_itab-vac_pump = ausp_itab-atwrt . "VAC_PUMP
when '0000000172' .
zsdtab1_itab-sd_ab_sn_l = ausp_itab-atwrt . "SD_AB_SN_L
when '0000000174' .
zsdtab1_itab-sd_ab_sn_r = ausp_itab-atwrt . "SD_AB_SN_R
when '0000000175' .
zsdtab1_itab-asrhydunit = ausp_itab-atwrt . "ASRHYDUNIT
when '0000000176' .
zsdtab1_itab-gearboxno = ausp_itab-atwrt . "GEARBOXNO
when '0000000177' .
zsdtab1_itab-battery = ausp_itab-atwrt . "BATTERY
when '0000000178' .
zsdtab1_itab-tyretype = ausp_itab-atwrt . "TYRETYPE
when '0000000179' .
zsdtab1_itab-tyremake = ausp_itab-atwrt . "TYREMAKE
when '0000000180' .
zsdtab1_itab-tyresize = ausp_itab-atwrt . "TYRESIZE
when '0000000181' .
zsdtab1_itab-rr_axle_no = ausp_itab-atwrt . "RR_AXLE_NO
when '0000000183' .
zsdtab1_itab-ff_axl_nor = ausp_itab-atwrt . "FF_AXLE_NO_rt
when '0000000182' .
zsdtab1_itab-ff_axl_nol = ausp_itab-atwrt . "FF_AXLE_NO_lt
when '0000000184' .
zsdtab1_itab-drivairbag = ausp_itab-atwrt . "DRIVAIRBAG
when '0000000185' .
zsdtab1_itab-st_box_no = ausp_itab-atwrt . "ST_BOX_NO
when '0000000186' .
zsdtab1_itab-transport = ausp_itab-atwrt . "TRANSPORT
when '0000000106' .
zsdtab1_itab-trackstage = ausp_itab-atwrt . " tracking stage
when '0000000111' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_1 = date . " tracking date for 1.
when '0000000112' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_5 = date . " tracking date for 5.
when '0000000113' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_10 = date . "tracking date for 10
when '0000000114' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_15 = date . "tracking date for 15
when '0000000115' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_20 = date . " tracking date for 20
when '0000000116' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_25 = date . " tracking date for 25
when '0000000117' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_30 = date . "tracking date for 30
when '0000000118' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_35 = date . "tracking date for 35
when '0000000119' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_40 = date . " tracking date for 40
when '0000000120' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_45 = date . " tracking date for 45
when '0000000121' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_50 = date . "tracking date for 50
when '0000000122' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_55 = date . "tracking date for 55
when '0000000123' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_60 = date . " tracking date for 60
when '0000000124' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_65 = date . " tracking date for 65
when '0000000125' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_70 = date . "tracking date for 70
when '0000000126' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_75 = date . "tracking date for 75
when '0000000127' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_78 = date . " tracking date for 78
when '0000000203' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_79 = date . " tracking date for 79
when '0000000128' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_80 = date . " tracking date for 80
when '0000000129' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_85 = date . "tracking date for 85
when '0000000130' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_90 = date . "tracking date for 90
when '0000000131' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_95 = date . "tracking date for 95
when '0000000132' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_100 = date . " tracking date for100
when '0000000133' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_110 = date . " tracking date for110
when '0000000134' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_115 = date . "tracking date for 115
when '0000000135' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_120 = date . "tracking date for 120
when '0000000136' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_105 = date . "tracking date for 105
when '0000000137' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_1 = date . "plan trk date for 1
when '0000000138' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_5 = date . "plan trk date for 5
when '0000000139' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_10 = date . "plan trk date for 10
when '0000000140' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_15 = date . "plan trk date for 15
when '0000000141' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_20 = date . "plan trk date for 20
when '0000000142' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_25 = date . "plan trk date for 25
when '0000000143' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_30 = date . "plan trk date for 30
when '0000000144' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_35 = date . "plan trk date for 35
when '0000000145' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_40 = date . "plan trk date for 40
when '0000000146' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_45 = date . "plan trk date for 45
when '0000000147' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_50 = date . "plan trk date for 50
when '0000000148' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_55 = date . "plan trk date for 55
when '0000000149' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_60 = date . "plan trk date for 60
when '0000000150' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_65 = date . "plan trk date for 65
when '0000000151' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_70 = date . "plan trk date for 70
when '0000000152' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_75 = date . "plan trk date for 75
when '0000000153' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_78 = date . "plan trk date for 78
when '0000000202' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_79 = date . "plan trk date for 79
when '0000000154' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_80 = date . "plan trk date for 80
when '0000000155' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_85 = date . "plan trk date for 85
when '0000000156' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_90 = date . "plan trk date for 90
when '0000000157' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_95 = date . "plan trk date for 95
when '0000000158' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_100 = date . "plan trk date for 100
when '0000000159' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_105 = date . "plan trk date for 105
when '0000000160' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_110 = date . "plan trk date for 110
when '0000000161' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_115 = date . "plan trk date for 115
when '0000000162' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_120 = date . "plan trk date for 120
********Additional fields / 24.05.98**********************************
when '0000000099' .
case ausp_itab-atwrt .
when '540' .
zsdtab1_itab-roll_blind = 'X' .
when '482' .
zsdtab1_itab-ground_clr = 'X' .
when '551' .
zsdtab1_itab-anti_theft = 'X' .
when '882' .
zsdtab1_itab-anti_tow = 'X' .
when '656' .
zsdtab1_itab-alloy_whel = 'X' .
when '265' .
zsdtab1_itab-del_class = 'X' .
when '280' .
zsdtab1_itab-str_wheel = 'X' .
when 'CDC' .
zsdtab1_itab-cd_changer = 'X' .
when '205' .
zsdtab1_itab-manual_eng = 'X' .
when '273' .
zsdtab1_itab-conn_handy = 'X' .
when '343' .
zsdtab1_itab-aircleaner = 'X' .
when '481' .
zsdtab1_itab-metal_sump = 'X' .
when '533' .
zsdtab1_itab-speaker = 'X' .
when '570' .
zsdtab1_itab-arm_rest = 'X' .
when '580' .
zsdtab1_itab-aircond = 'X' .
when '611' .
zsdtab1_itab-exit_light = 'X' .
when '613' .
zsdtab1_itab-headlamp = 'X' .
when '877' .
zsdtab1_itab-readlamp = 'X' .
when '808' .
zsdtab1_itab-code_ckd = 'X' .
when '708' .
zsdtab1_itab-del_prt_lc = 'X' .
when '593' .
zsdtab1_itab-ins_glass = 'X' .
when '955' .
zsdtab1_itab-zelcl = 'Elegance' .
when '593' .
zsdtab1_itab-zelcl = 'Classic' .
endcase .
endcase .
endloop .
*--Update the sales data .--
perform get_sales_order using mara_itab-matnr .
perform get_cartype using mara_itab-matnr .
append zsdtab1_itab .
endloop.
<<<
loop at zsdtab1_itab .
if zsdtab1_itab-cartype <> 'W-203'
or zsdtab1_itab-cartype <> 'W-210'
or zsdtab1_itab-cartype <> 'W-211'.
clear zsdtab1_itab-zelcl.
endif.
SELECT SINGLE * FROM ZSDTAB1 WHERE COMMNO = MARA_ITAB-MATNR .
select single * from zsdtab1 where commno = zsdtab1_itab-commno.
if sy-subrc <> 0 .
insert into zsdtab1 values zsdtab1_itab .
else .
update zsdtab1 set :vbeln = zsdtab1_itab-vbeln
bill_doc = zsdtab1_itab-bill_doc
dest = zsdtab1_itab-dest
lgort = zsdtab1_itab-lgort
ship_tp = zsdtab1_itab-ship_tp
country = zsdtab1_itab-country
kunnr = zsdtab1_itab-kunnr
vkbur = zsdtab1_itab-vkbur
customer = zsdtab1_itab-customer
city = zsdtab1_itab-city
region = zsdtab1_itab-region
model = zsdtab1_itab-model
drive = zsdtab1_itab-drive
converter = zsdtab1_itab-converter
transmssn = zsdtab1_itab-transmssn
colour = zsdtab1_itab-colour
ztrim = zsdtab1_itab-ztrim
commno = zsdtab1_itab-commno
trackstage = zsdtab1_itab-trackstage
chassis_no = zsdtab1_itab-chassis_no
engine_no = zsdtab1_itab-engine_no
body_no = zsdtab1_itab-body_no
cockpit = zsdtab1_itab-cockpit
airbag = zsdtab1_itab-airbag
trailer_no = zsdtab1_itab-trailer_no
fininspdat = zsdtab1_itab-fininspdat
entrydate = zsdtab1_itab-entrydate
regist_no = zsdtab1_itab-regist_no
mech_key = zsdtab1_itab-mech_key
side_ab_rt = zsdtab1_itab-side_ab_rt
side_ab_lt = zsdtab1_itab-side_ab_lt
elect_key = zsdtab1_itab-elect_key
head_lamp = zsdtab1_itab-head_lamp
tail_lamp = zsdtab1_itab-tail_lamp
vac_pump = zsdtab1_itab-vac_pump
sd_ab_sn_l = zsdtab1_itab-sd_ab_sn_l
sd_ab_sn_r = zsdtab1_itab-sd_ab_sn_r
asrhydunit = zsdtab1_itab-asrhydunit
gearboxno = zsdtab1_itab-gearboxno
battery = zsdtab1_itab-battery
tyretype = zsdtab1_itab-tyretype
tyremake = zsdtab1_itab-tyremake
tyresize = zsdtab1_itab-tyresize
rr_axle_no = zsdtab1_itab-rr_axle_no
ff_axl_nor = zsdtab1_itab-ff_axl_nor
ff_axl_nol = zsdtab1_itab-ff_axl_nol
drivairbag = zsdtab1_itab-drivairbag
st_box_no = zsdtab1_itab-st_box_no
transport = zsdtab1_itab-transport
OPTIONS-
roll_blind = zsdtab1_itab-roll_blind
ground_clr = zsdtab1_itab-ground_clr
anti_theft = zsdtab1_itab-anti_theft
anti_tow = zsdtab1_itab-anti_tow
alloy_whel = zsdtab1_itab-alloy_whel
del_class = zsdtab1_itab-del_class
str_wheel = zsdtab1_itab-str_wheel
cd_changer = zsdtab1_itab-cd_changer
manual_eng = zsdtab1_itab-manual_eng
conn_handy = zsdtab1_itab-conn_handy
aircleaner = zsdtab1_itab-aircleaner
metal_sump = zsdtab1_itab-metal_sump
speaker = zsdtab1_itab-speaker
arm_rest = zsdtab1_itab-arm_rest
aircond = zsdtab1_itab-aircond
exit_light = zsdtab1_itab-exit_light
headlamp = zsdtab1_itab-headlamp
readlamp = zsdtab1_itab-readlamp
code_ckd = zsdtab1_itab-code_ckd
del_prt_lc = zsdtab1_itab-del_prt_lc
ins_glass = zsdtab1_itab-ins_glass
dat_trk_1 = zsdtab1_itab-dat_trk_1
dat_trk_5 = zsdtab1_itab-dat_trk_5
dat_trk_10 = zsdtab1_itab-dat_trk_10
dat_trk_15 = zsdtab1_itab-dat_trk_15
dat_trk_20 = zsdtab1_itab-dat_trk_20
dat_trk_25 = zsdtab1_itab-dat_trk_25
dat_trk_30 = zsdtab1_itab-dat_trk_30
dat_trk_35 = zsdtab1_itab-dat_trk_35
dat_trk_40 = zsdtab1_itab-dat_trk_40
dat_trk_45 = zsdtab1_itab-dat_trk_45
dat_trk_50 = zsdtab1_itab-dat_trk_50
dat_trk_55 = zsdtab1_itab-dat_trk_55
dat_trk_60 = zsdtab1_itab-dat_trk_60
dat_trk_65 = zsdtab1_itab-dat_trk_65
dat_trk_70 = zsdtab1_itab-dat_trk_70
dat_trk_75 = zsdtab1_itab-dat_trk_75
dat_trk_78 = zsdtab1_itab-dat_trk_78
dat_trk_79 = zsdtab1_itab-dat_trk_79
dat_trk_80 = zsdtab1_itab-dat_trk_80
dat_trk_85 = zsdtab1_itab-dat_trk_85
dat_trk_90 = zsdtab1_itab-dat_trk_90
dat_trk_95 = zsdtab1_itab-dat_trk_95
dattrk_100 = zsdtab1_itab-dattrk_100
dattrk_105 = zsdtab1_itab-dattrk_105
dattrk_110 = zsdtab1_itab-dattrk_110
dattrk_115 = zsdtab1_itab-dattrk_115
dattrk_120 = zsdtab1_itab-dattrk_120
pdt_tk_1 = zsdtab1_itab-pdt_tk_1
pdt_tk_5 = zsdtab1_itab-pdt_tk_5
pdt_tk_10 = zsdtab1_itab-pdt_tk_10
pdt_tk_15 = zsdtab1_itab-pdt_tk_15
pdt_tk_20 = zsdtab1_itab-pdt_tk_20
pdt_tk_25 = zsdtab1_itab-pdt_tk_25
pdt_tk_30 = zsdtab1_itab-pdt_tk_30
pdt_tk_35 = zsdtab1_itab-pdt_tk_35
pdt_tk_40 = zsdtab1_itab-pdt_tk_40
pdt_tk_45 = zsdtab1_itab-pdt_tk_45
pdt_tk_50 = zsdtab1_itab-pdt_tk_50
pdt_tk_55 = zsdtab1_itab-pdt_tk_55
pdt_tk_60 = zsdtab1_itab-pdt_tk_60
pdt_tk_65 = zsdtab1_itab-pdt_tk_65
pdt_tk_70 = zsdtab1_itab-pdt_tk_70
pdt_tk_75 = zsdtab1_itab-pdt_tk_75
pdt_tk_78 = zsdtab1_itab-pdt_tk_78
pdt_tk_79 = zsdtab1_itab-pdt_tk_79
pdt_tk_80 = zsdtab1_itab-pdt_tk_80
pdt_tk_85 = zsdtab1_itab-pdt_tk_85
pdt_tk_90 = zsdtab1_itab-pdt_tk_90
pdt_tk_95 = zsdtab1_itab-pdt_tk_95
pdt_tk_100 = zsdtab1_itab-pdt_tk_100
pdt_tk_105 = zsdtab1_itab-pdt_tk_105
pdt_tk_110 = zsdtab1_itab-pdt_tk_110
pdt_tk_115 = zsdtab1_itab-pdt_tk_115
pdt_tk_120 = zsdtab1_itab-pdt_tk_120
cartype = zsdtab1_itab-cartype
zelcl = zsdtab1_itab-zelcl
excise_no = zsdtab1_itab-excise_no
where commno = zsdtab1_itab-commno .
Update table .---------<<<
endif .
endloop .
perform update_excise_date .
perform update_post_goods_issue_date .
perform update_time.
*///////////////////// end of programe /////////////////////////////////
Get sales data -
form get_sales_order using matnr .
data : corr_vbeln like vbrk-vbeln .
ADDED BY ADITYA / 22.06.98 **************************************
perform get_order using matnr .
select single vbeln lgort into (zsdtab1_itab-vbeln , zsdtab1_itab-lgort)
from vbap where matnr = matnr . " C-22.06.98
from vbap where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
************Get the Excise No from Allocation Field*******************
select single * from zsdtab1 where commno = matnr .
if zsdtab1-excise_no = '' .
select * from vbrp where matnr = matnr .
select single vbeln into corr_vbeln from vbrk where
vbeln = vbrp-vbeln and vbtyp = 'M'.
if sy-subrc eq 0.
select single * from vbrk where vbtyp = 'N'
and sfakn = corr_vbeln. "cancelled doc.
if sy-subrc ne 0.
select single * from vbrk where vbeln = corr_vbeln.
if sy-subrc eq 0.
data : year(4) .
move sy-datum+0(4) to year .
select single * from bkpf where awtyp = 'VBRK' and awkey = vbrk-vbeln
and bukrs = 'MBIL' and gjahr = year .
if sy-subrc = 0 .
select single * from bseg where bukrs = 'MBIL' and belnr = bkpf-belnr
and gjahr = year and koart = 'D' and
shkzg = 'S' .
zsdtab1_itab-excise_no = bseg-zuonr .
endif .
endif.
endif.
endif.
endselect.
endif .
select single kunnr vkbur into (zsdtab1_itab-kunnr ,
zsdtab1_itab-vkbur) from vbak
where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
select single name1 ort01 regio into (zsdtab1_itab-customer ,
zsdtab1_itab-city , zsdtab1_itab-region) from kna1
where kunnr = zsdtab1_itab-kunnr .
endif.
Get Ship to Party **************************************************
select single * from vbpa where vbeln = zsdtab1_itab-vbeln and
parvw = 'WE' .
if sy-subrc = 0 .
zsdtab1_itab-ship_tp = vbpa-kunnr .
Get Destination Country of Ship to Party .************
select single * from kna1 where kunnr = vbpa-kunnr .
if sy-subrc = 0 .
select single * from t005t where land1 = kna1-land1
and spras = 'E' .
if sy-subrc = 0 .
zsdtab1_itab-country = t005t-landx .
endif .
endif .
endif .
endif .
endform. " GET_SALES
form update_time.
update zstatus set zupddate = sy-datum
uzeit = sy-uzeit
where programm = 'ZSDDET01' .
endform. " UPDATE_TIME
*& Form DATE_CONVERT
form date_convert using atflv changing date .
data : dt(8) , dat type i .
dat = atflv .
dt = dat .
date = dt .
endform. " DATE_CONVERT
*& Form UPDATE_POST_GOODS_ISSUE_DATE
form update_post_goods_issue_date .
types : begin of itab1_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab1_type .
data : itab1 type itab1_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-postdate = '00000000' .
refresh itab1 . clear itab1 .
select * from mseg where matnr = mara_itab-matnr and bwart = '601' .
itab1-mblnr = mseg-mblnr .
append itab1 .
endselect .
loop at itab1 .
select single * from mkpf where mblnr = itab1-mblnr .
if sy-subrc = 0 .
itab1-budat = mkpf-budat .
modify itab1 .
endif .
endloop .
sort itab1 by budat .
read table itab1 index 1 .
if sy-subrc = 0 .
update zsdtab1 set postdate = itab1-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_POST_GOODS_ISSUE_DATE
*& Form UPDATE_EXCISE_DATE
form update_excise_date.
types : begin of itab2_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab2_type .
data : itab2 type itab2_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-excise_dat = '00000000' .
refresh itab2 . clear itab2 .
select * from mseg where matnr = mara_itab-matnr and
( bwart = '601' or bwart = '311' ) .
itab2-mblnr = mseg-mblnr .
append itab2 .
endselect .
loop at itab2 .
select single * from mkpf where mblnr = itab2-mblnr .
if sy-subrc = 0 .
itab2-budat = mkpf-budat .
modify itab2 .
endif .
endloop .
sort itab2 by budat .
read table itab2 index 1 .
if sy-subrc = 0 .
update zsdtab1 set excise_dat = itab2-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_EXCISE_DATE
form get_order using matnr .
types : begin of itab_type ,
vbeln like vbap-vbeln ,
posnr like vbap-posnr ,
end of itab_type .
data : itab type itab_type occurs 10 with header line .
refresh itab . clear itab .
select * from vbap where matnr = mara_itab-matnr .
itab-vbeln = vbap-vbeln .
itab-posnr = vbap-posnr .
append itab .
endselect .
loop at itab .
select single * from vbak where vbeln = itab-vbeln .
if vbak-vbtyp <> 'C' .
delete itab .
endif .
endloop .
loop at itab .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'H' .
if sy-subrc = 0 .
delete itab .
endif .
endloop .
clear : zsdtab1_itab-vbeln , zsdtab1_itab-bill_doc .
loop at itab .
zsdtab1_itab-vbeln = itab-vbeln .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'M' .
if sy-subrc = 0 .
zsdtab1_itab-bill_doc = vbfa-vbeln .
endif .
endloop .
endform .
*& Form GET_CARTYPE
form get_cartype using matnr .
select single * from mara where matnr = matnr .
zsdtab1_itab-cartype = mara-satnr .
endform. " GET_CARTYPEHi,
I have analysed your program and i would like to share following points for better performance of this report :
(a) Use the field Names instead of Select * or Select Single * as if you use the field names it will consume less amount of resources inside the loop as well as you have lot many Select Single * and u r using very big tables like VBAP and many more.
(b) Trace on ST05 which particular query is mostly effecting your system or use ST12 in current mode to trace for less inputs which run the report for 20-30 min so that we get an idea which queries are effecting the system and taking a lot of time.
(c) In Case of internal tables sort the data properly and use binary search for getting the data.
I think this will help.
Thanks and Regards,
Harsh -
Report painter performance problem...
I have a client which runs a report group consists of 14 reports... When we run this program... It takes about 20 minutes to get results... I was assigned to optimize this report...
This is what I've done so far
(this is a SAP generated program)...
1. I've checked the tables that the program are using... (a customized table with more than 20,000 entries and many others)
2. I've created secondary indexes to the main customized table with (20,000) entries - It improves the performance a bit(results about 18 minutes)...
3. I divided the report group by 4... 3 reports each report group... It greatly improves the performance... (but this is not what the client wants)...
4. I've read an article about report group performance that it is a bug.
(sap support recognized the fact that we are dealing with a bug in the sap standard functionality)
http://it.toolbox.com/blogs/sap-on-db2/sap-report-painter-performance-problem-26000
Anyone have the same problem as mine?
Edited by: christopher mancuyas on Sep 8, 2008 9:32 AM
Edited by: christopher mancuyas on Sep 9, 2008 5:39 AMReport painter/Writer always creates a prerformance issue.i never preffred them since i have a option with Zreport
now you can do only one thing put more checks on selection-screen for filtering the data.i think thats the only way.
Amit. -
Interactive report performance problem over database link - Oracle Gateway
Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
, a.col1 y
, a.col2 z
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;) -
Performance problems with abap report SAPLPRGN_STRUCTURE during users login
Hello,
after patchimport of SAP BASIS level 21 and SAPABAP level 21 our SAP Production System (ECC6-UNICODE KERNEL 240) denote a performance problems. A lot of ours users during logon phase must wait until 10-12 minutes before that the navigation menu is displayed. The problem is generated by the slow performance of the standard SAP REPORT SAPLPRGN_STRUCTURE that require a lot time. Any idea?
ThanksHi Pat,
I would stop SAP and use DLTR3PKG, If this doesn't help, you need to investigate, if it is a CPU or DB-Time issue in ST03. Then you have to handle accordingly ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
I have a report that contains 17 queries, which populate 17 layouts. As you can imagine, it is very slow. It takes about a minute before the report will display on the client PC. In a form which calls this report I have a pl/sql routine that populates some display fields with the same data as the report. This pl/sql trigger returns the data in under a second. What am I doing wrong in the report? How can I improve the performance of the report and thereby shorten the execution time? Please help. Thanks in advance.
Richard,
This is difficult to say because a lot depends on the complexity of the queries and the complexity of the layouts. There are some statistics you can gather from Reports by using the trace profile command (see the online help or the following document for syntax). Download the "Tuning Oracle Reports" from the Reports product page here at OTN. Here is the link http://technet.oracle.com/products/reports/pdf/275641.pdf
The will give you some ideas on how to improve performance of your Report and Thanks for using Oracle Reports.
Regards,
The Oracle Reports Team. -
Airport multicast performance problems in u-verse IPTV bridge.
I have a bunch of airport hardware, two n expresses, a draft n extreme, and a 5th generation extreme. I've recently moved to a new house and have AT&T's u-verse multicast IPTV installed. I want to put my TV somewhere without wiring and was going to just do it using a dedicated 802.11n bridge formed from either the two expresses, or the draft n extreme (at the multicast source side) and an express as a receiver.
This seems to work from a functionality perspective, I get the multicast stream into the AT&T set-top box and can watch all of the channels for extended periods of time. The problem that I run into is that I have performance problems that result in the video stuttering, pixelating, and freezing for seconds to minutes at a time. I don't understand why this is the case. The HD stream is less than 9Mbps which should be easily handled by a 5Ghz, n-only link. The source and destination expresses are within 5 feet of each other with clear line-of-sight.
Does anyone have any experience with multicast streaming on aiport hardware? Is there some limitation in the airport implementation where multicast (UDP) packets trigger some sort of slowpath packet processing, so that packets are being dropped? Is there some reporting feature within airport utility that where I can look for diagnostics related to dropped or (extremely) delayed packets? Is there something about AT&T's use of multicast IPTV that is just incompatible with airport hardware?
Note that the u-verse gateway handles all of the IGMP in this situation, and that nothing else is on the network. Well, the 5th gen router is on the network and everything else I own is behind it on a different wifi network. The gateway is smart enough to filter out the multicast traffic so that the router doesn't see it.Found a solution. Switching from Apple's built-in "create a wireless network" and "join a wireless network+allow ethernet clients" to a WDS network with a main and a remote solves all of the problems. It's not a great option because the WDS network forces me to select a fixed, 2.4Ghz channel, but the IPTV stream is only 8-ish Mbps which seems to be doable, even with all of the wireless networks floating around my house. I guess that it could be a bigger problem during peak wifi usage around here, but we'll cross that bridge when it happens.
-
Performance problem with WPF Viewer CRVS2010
Hi,
We are using Crystal Reports 2010 and the new WPF Viewer. Last week when we set up a test machine to run our integration tests (several hundred) all report tests failed (about 30 tests) with a timeout exception.
The testmachine setup:
HP DL 580 G5
WMWare ESXi 4.0
Guest OS: Windows 7 Enterprise 64-bit
Memory (guest OS): 3GB
CPU: 1
Visual Studio 2010
Crystal Reports for Visual Studio 2010 with 64 bit runtime installed
Visual Studio 2008 installed
Microsoft Office 2010 installed
Macafee antivirus
There are about 10 other virtual machines on the same HW.
I think the performance problem is related to text obejcts on a report document viewed in a WPF Viewer. I made a simple WPF GUI with 2 buttons and the first button executes a very simple report that only has a text object with a few words in it and the other button is also a simple report with only 1 text object with approx. 100 words (about 800 charchters).
The first report executes and displays almost instantly and the second report executes instantantly but displays after approx. 1 min 30 sec.
And execute in this context means that all VB.Net code runs in the compiler without any exception or performance problem. The performance problem seems to come after viewer.Show() (in the code below) has executed.
I did another test on the second report and replaced the text obejct with a formula field with the same text as the text object and this test executed and displayed the report instantly.
So the performance problem seems to have something to do with rendering of textobjects in the WPF Viewer on a virtual machine with the above setup.
I've made several tests on local machines with Windows XP (32 bit) or Winows 7 (64 bit) installed and none of them have this performance problem. Its not a critical issue for us because our users will run this application on their local PCs with Windows 7 64-bit but its a bit problematic for our project not being able to run all of our integration tests but I will probably solve this by using a local PC instead.
Here is the VB.Net code Im using to View the reports:
Private Sub LightWeight_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeight.rpt")
' Initialize Viewer
Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
viewer.Owner = Me
viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
viewer.Show()
End Sub
Private Sub LightWeightSlow_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeightSlow.rpt")
' Initialize Viewer
Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
viewer.Owner = Me
viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
viewer.Show()
End Sub
The reports are 2 empty default reports with only 1 textobject on the details section.
// ThomasSee if the KB [
[1448013 - Connecting to Oracle database. Error; Failed to load database information|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433343338333033313333%7D.do] helps.
Also the following may not hurt to have a look at (if only for ideas):
[1217021 - Err Msg: "Unable to connect invalid log on parameters" using Oracle in VS .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033323331%7D.do]
[1471508 - Logon error when connecting to Oracle database in a VS .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373331333533303338%7D.do]
[1196712 - Error: "Failed to load the oci.dll" in ASP.NET application against an Oracle database|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393336333733313332%7D.do]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Maybe you are looking for
-
[SOLVED] Xorg / Bumblebee on Asus N56V
Hello. I've recently choose to give my laptop a true OS, but I encoutered some difficulties. Modèle : ASUS N56V8 with Intel HD Graphics 4000 and Nvidia GeForce 650M It came originally with Windows 8, uefi, secureboot and all. I already had some exper
-
How to do changeover of relationship types in BOR ???
At our site, the method display_attachment of cl_gos_document service short dumps. The short dump message says that the BOR relationship type "ATTA" is no longer supported, and that this is due to an "incomplete changeover" of BOR relationships at t
-
Login screen black on Mountain Lion
I upgraded my MacBook Pro 13 early 2011 to Mountain Lion yesterday. I am having a problem with the login screen. About 50% of the time when I reboot, the login screen is completely blank, just plain black. The other screens I have connected show the
-
Hiding the table grid in Appleworks 6 so they don't print
I created a handy layout grid for my pix and text, now can't get rid of the ugly table borders for printing it out. It surely must be possible...or should I be using something else to create a layout for a page? I searched on this topic and found som
-
Unable to crawl PDF files in fileshare
Search Crawler is unable to crawl some PDF files in the Fileshare.. The Crawl log has the below error message Processing this item failed because the parser server ran out of memory. ( Error parsing document 'file://servern ame/xxx/yyy/zzzz.pdf'. Doc