Performance problem of RAC
Dear,
I encountered performance problem in my production databases, running Oracle RAC (2 nodes) on version 10.2.0.2.0. The scenario is that the database suddenly slows down at a particular time. In reviewing the alert log, I found the following message:
Node 1: Ora-3136 inbound connection timed out (occurs around 20 times)
Node 2: SQL*net time-out error (occurs few times)
In addition, in my statspack report, at that particular time interval, the following messages appear:
Node 1:
For the top 5 timed events, 'log file switch completion' is the first on the list, with the following figures:
Waits Time(s) Avg Wait (ms) Total Call time
4143 4036 974 25.8
Node 2:
For the top 5 timed events, 'gc cr block busy' is the first on the list, with the following figures:
Waits Time(s) Avg Wait (ms) Total Call time
3387 1939 573 27.2
I just guess 'log file switch completion' should not always be on the 'wait list'. Also, Archive log seems not full at the moment. There are also a lot of I/O at that moment. Not understand what the DB is doing.
Do anyone have any ideas on the cause of the problem?
Thanks
You need to define a service to run preferably on node 2 with failover to node 1, and give a your batch jobs a connect string that connects to that service:
srvctl add service -d whatever -s batchserv -r node2 -a node1
and in your tnsnames.ora,
batchserv=
(description=
(address_list=
(failover=on)(load_balance=on)
(address=(node1....)(address=(node2...))
(connect_data=(service_name=batchserv))
I've recorded many demonstrations of this sort thing,
Free Oracle Databse 12c and 11g Tutorials for Administration and Developers SkillBuilders
John Watson
Oracle Certified Master DBA
Similar Messages
-
Hi all,
I'm having some performance problems and i have generated an AWR of a day and i have seen this following things:
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time Wait Class
CPU time 50,318 41.7
db file sequential read 6,688,472 32,711 5 27.1 User I/O
Backup: sbtwrite2 1,068,309 7,903 7 6.6 Administra
db file scattered read 1,012,065 6,999 7 5.8 User I/O
PX Deq Credit: send blkd 231,401 4,989 22 4.1 Other
Operating System Statistics DB/Inst: CAPDB14P/capdb14p1 Snaps: 15710-15778
Statistic Total
AVG_BUSY_TIME 3,221,704
AVG_IDLE_TIME 4,923,831
AVG_IOWAIT_TIME 2,302,776
AVG_SYS_TIME 537,429
AVG_USER_TIME 2,682,900
BUSY_TIME 6,446,121
IDLE_TIME 9,850,381
IOWAIT_TIME 4,608,322
SYS_TIME 1,077,598
USER_TIME 5,368,523
LOAD 0
OS_CPU_WAIT_TIME 1,999,898,469,700
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 12,201,893,888
VM_OUT_BYTES 476,655,616
PHYSICAL_MEMORY_BYTES 8,568,512,512
NUM_CPUS 2
NUM_CPU_SOCKETS 2
###########################3
I think that we are having CPU problems here !!
All my memory caches are good, 99% hit.
Anybody agree with me???
Tks,
PauloI have problems on some queries that have another wait event related to RAC.
"gc cs multi block request" is taking a lot of time on some queries. These queries run very fast at another databas that isn't a RAC database.
Example:
1-Tables has the same number of rows!!!!!
2-Both tables and indexes are analyzed using the same tool (DBMA_STATS)
####RAC DATABASE####
SELECT 1 from dual
WHERE NOT EXISTS (SELECT 1
FROM mensalidade a
WHERE data_vencimento >= CHAR_TO_DATE('20070201'));
----Explain
SELECT STATEMENT, GOAL = ALL_ROWS 4 1
FILTER
FAST DUAL 2 1
PX COORDINATOR FORCED SERIAL
PX SEND QC (RANDOM) SYS :TQ10000 2 1 7
PX BLOCK ITERATOR 2 1 7
INDEX FAST FULL SCAN BRCAPDB2 IMENSALIDADE1 2 1 7
----It takes more than 500 seconds to run
####STANDALONE DATABASE####
SELECT 1 from dual
WHERE NOT EXISTS (SELECT 1
FROM mensalidade a
WHERE data_vencimento >= CHAR_TO_DATE('20070201'));
----Explain
SELECT STATEMENT, GOAL = ALL_ROWS 4 1
FILTER
FAST DUAL 2 1
PX COORDINATOR FORCED SERIAL
PX SEND QC (RANDOM) SYS :TQ10000 2 2 16
PX BLOCK ITERATOR 2 2 16
TABLE ACCESS FULL BRCAPDB2 MENSALIDADE 2 2 16
----It takes 0.1 seconds to run -
Problems with RAC and XA: Fallback
Hello,
we are seing problems with RAC and XA (Tuxedo 11, DB 11.2), specifically encountering "ORA-24798: cannot resume the distributed transaction branch on another instance".
The first scenario relates to fallback after a RAC node failure. There are two servers, S1 and S2. S1 makes an ATMI call to S2. Both servers are in the same Tuxedo group, using TMS_ORA. RAC is set up for failover (BASIC), no load balancing.
The sequence is:
- S1 and S2 are connected to the same RAC node n1. All is well.
- RAC node n1 fails. S1, S2 and the TMS_ORA all fail over to RAC node n2. After the failover has happened, all is well.
- RAC node n1 recovers. All is still well (as there is no automatic fallback).
- S1 (or S2) is restarted (either intentionally or because of a crash). Since n1 is up again, S1 connects to n1. Now we get ORA-24798. Permanently.
S1 is connected to n1 and S2 is connected to n2. Since both are in the same group, both use the same XA transaction branch. When called, S2 attempts to JOIN the transaction branch that S1 started. But the DB (11.2) does not allow the same branch to span more than one node. Hence the ORA-24798.
This seems to be a severe limitation in the combination of Tuxedo, XA and RAC. It basically means we still have to use DTP services, even with Tuxedo 11 and DB 11.2. Or are we missing something?
We could put S1 and S2 into different groups, but that seems to be inefficient, and not practical for a real application (10s of servers).
I am extrapolating from this that RAC load balancing would also not work, as S1 and S2 could be connected to different RAC nodes.
RogerRoger,
When using an external transaction manager such as Tuxedo you should still declare Oracle services as DTP services when using Oracle Database 11g. The Tuxedo documentation is not clear about this. The relevant 11gR2 RAC documentation is at http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/hafeats.htm and states
"An XA transaction can span Oracle RAC instances by default, allowing any application that uses the Oracle XA library to take full advantage of the Oracle RAC environment to enhance the availability and scalability of the application.
"GTXn background processes support global (XA) transactions in an Oracle RAC environment. The GLOBAL_TXN_PROCESSES initialization parameter, which is set to 1 by default, specifies the initial number of GTXn background processes for each Oracle RAC instance. Use the default value for this parameter clusterwide to allow distributed transactions to span multiple Oracle RAC instances. Using the default value allows the units of work performed across these Oracle RAC instances to share resources and act as a single transaction (that is, the units of work are tightly coupled). It also allows 2PC requests to be sent to any node in the cluster.
"Before Release 11.1, the way to achieve tight coupling in Oracle RAC was to use Distributed Transaction Processing (DTP) services, that is, services whose cardinality (one) ensured that all tightly-coupled branches landed on the same instance—regardless of whether load balancing was enabled. Tightly coupled XA transactions no longer require the special type of singleton services to be deployed on Oracle RAC databases if the XA application does not join or resume XA transaction branches. XA transactions are transparently supported on Oracle RAC databases with any type of service configuration.
A"n external transaction manager, such as Oracle Services for Microsoft Transaction Server (OraMTS), coordinates DTP/XA transactions. However, an internal Oracle transaction manager coordinates distributed SQL transactions. Both DTP/XA and distributed SQL transactions must use the DTP service in Oracle RAC."
This issue came up earlier this year in another newsgroup thread at https://forums.oracle.com/forums/thread.jspa?threadID=2165803
Regards,
Ed -
RMAN duplicate target database from active database - performance problem
Hello. I’m running into a major performance problem when trying to duplicate a database from a target located inside our firewall to an auxiliary located outside our firewall. Both target and auxiliary are located in the same equipment room just on different subnets. Previously I had the auxiliary located on the same subnet as the target behind the firewall and duplicating a 4.5T database took 12 hours. Now with the auxiliary moved outside the firewall attempting to duplicate the same 4.5T database is estimated to exceed 35 hours. The target is a RAC instance using ASM and so is the auxiliary. Ping, tnsping, traceroutes to and from target and auxiliary all indicate no problem or latency. Any ideas on things to consider while hunting for this elusive performance decrease?
Thanks in advance.It would obviously appear network related. Have you captured any network/firewall metrics? Are all components set to full duplex? Would it be possible to take the firewall down temporarily and then test the throughput? Do you encounter any latency if you were to copy a large file across the subnets?
You may want to check V$RMAN_BACKUP_JOB_DETAILS, V$BACKUP_SYNC_IO or V$BACKUP_ASYNC_IO when the backup is running. -
Question for ORACLE EXPERTS!!! PERFORMANCE PROBLEM!!!
I have 2 nodes on RAC. On node1 the following query run in 15 seconds and on node2 the same query run in 40 minutes. This is a big problem because we are migrating a SQL Server database to Oracle RAC 10gR2 (10.2.0.2) on HP-UX Itanium and we can´t finish the project because of this performance problem!!! PLEASE HELP ME ORACLE GURUS !!! I have opened a TAR at Metalink a 3 month ago,but they can´t help me with this. Can anyone explain this event to me please??? " gc cr multi block request 92011 0.33 737.49
This is the query that i run on both nodes and this is the tkprof of the trace file when i run this on second node:
select /*+ NO_PARALLEL(t) */ sum(t.saldo_em_real)
from
brcapdb2.titulo t
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 13.76 790.26 0 107219 0 0
total 3 13.76 790.26 0 107219 0 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 31
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 2 0.00 0.00
SQL*Net message from client 2 0.02 0.02
gc cr multi block request 92011 0.33 737.49
gc current grant busy 1 0.00 0.00
latch: KCL gc element parent latch 4 0.00 0.00
latch: object queue header operation 17 0.00 0.01
latch free 6 0.00 0.00
gc remaster 9 1.94 9.00
gcs drm freeze in enter server mode 19 1.97 30.52
gc current block 2-way 10 0.61 2.72
SQL*Net break/reset to client 1 0.01 0.01
Please help me if you can!!
Tks,
Paulo.Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 2 0.00 0.00
SQL*Net message from client 2 0.02 0.02
gc cr multi block request 92011 0.33 737.49
gc current grant busy 1 0.00 0.00
latch: KCL gc element parent latch 4 0.00 0.00
latch: object queue header operation 17 0.00 0.01
latch free 6 0.00 0.00
gc remaster 9 1.94 9.00
gcs drm freeze in enter server mode 19 1.97 30.52
gc current block 2-way 10 0.61 2.72
SQL*Net break/reset to client 1 0.01 0.01There's lots of global cache traffic going on. All those multiblock transfers seem to be saturating the interconnect. Some things to consider:
- Have a look at metalink note 3951017.8 for a possible fix
- Check that your interconnect is properly configured
- Try running the query with PARALLEL hint. This would mean doing disk I/O instead of buffer & interconnect I/O.
edit: changed "without NOPARALLEL" to "with PARALLEL"
Message was edited by:
antti.koskinen -
Performance problem while CPU is 80% Idel ?
Hi,
My end users are claim for performance problem during execution of batch process.
As you can see there are 1,745 statement executing each second.
Awr report shows 98.1% of the time , waits on CPU .
Also Awr report shows that Host CPU is :79.9% Idel.
The second wait event shows only 212 seconds waits on db file sequential read.
Yet , 4 minute in 1 hour period is seems not an issue.
Please advise
DB Name DB Id Instance Inst Num Startup Time Release RAC
QERP xxx erp 1 21-Jan-13 15:40 11.2.0.2.0 ; NO
Host Name Platform CPUs Cores Sockets Memory(GB)
erptst HP-UX IA (64-bit) 16 16 4 127.83
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 40066 22-Jan-13 20:00:52 207 9.6
End Snap: 40067 22-Jan-13 21:00:05 210 9.6
Elapsed: 59.21 (mins)
DB Time: 189.24 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 8,800M 8,800M Std Block Size: 8K
Shared Pool Size: 1,056M 1,056M Log Buffer: 49,344K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 3.2 ; 0.1 ; 0.00 ; 0.05
DB CPU(s): 3.1 ; 0.1 ; 0.00 ; 0.05
Redo size: 604,285.1 ; 27,271.3
Logical reads: 364,792.3 ; 16,463.0
Block changes: 3,629.5 ; 163.8
Physical reads: 21.5 ; 1.0
Physical writes: 95.3 ; 4.3
User calls: 68.7 ; 3.1
Parses: 212.9 ; 9.6
Hard parses: 0.3 ; 0.0
W/A MB processed: 1.2 ; 0.1
Logons: 0.3 ; 0.0
Executes: 1,745.2 ; 78.8
Rollbacks: 1.2 ; 0.1
Transactions: 22.2
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 100.00 ; Redo NoWait %: 100.00
Buffer Hit %: 99.99 ; In-memory Sort %: 100.00
Library Hit %: 99.95 ; Soft Parse %: 99.85
Execute to Parse %: 87.80 ; Latch Hit %: 99.99
Parse CPU to Parse Elapsd %: 74.76 ; % Non-Parse CPU: 99.89
Shared Pool Statistics Begin End
Memory Usage %: 75.37 ; 76.85
% SQL with executions>1: 95.31 ; 85.98
% Memory for SQL w/exec>1: 90.33 ; 82.84
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
DB CPU 11,144 98.1
db file sequential read 52,714 214 4 1.9 User I/O
SQL*Net break/reset to client 29,050 6 0 .1 Applicatio
log file sync 2,536 6 2 .0 Commit
buffer busy waits 4,338 2 1 .0 Concurrenc
Host CPU (CPUs: 16 Cores: 16 Sockets: 4)
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
0.34 ; 0.33 ; 19.7 ; 0.4 ; 1.8 ; 79.9Nikolay Savvinov wrote:
if the users are complaining about performance of the batch process, then that's what you should be looking at, not the entire system.I find it strange to see "end users" and "the batch process" in the same sentence (as it was in the first post). "End users" gives me the feeling of a significant number of concurrent sessions with people waiting for results in real time at the far end, while "batch process" carries the image a small number of large scale processes running overnight to prepare the data for the following morning.
I mention this because my first view of the AWR output was: you've got 16 CPUs, only three in use, virtually no users, and doing very little work, how can the users complain. (One answer, of course, is that the 13 CPUs could be locked out of use as far as Oracle is concerned). On the second read I decided that the "users" had gone home, and the complaint was simply that the batch process wasn't completing in time.
In this case I think "the entire system" IS "the batch process"
Determine which stored procedures and/or SQL statements took longer than usual and then find out why. Most likely you'll be able to find
everything you need in AWR views (DBA_HIST_SQL%) and ASH archive (DBA_HIST_ACTIVE_SESS_HISTORY).
If the batch process has changed dramatically and recently, then a simple first step might be to look at the current AWR report, find the few most time-consuming SQL statements, and use the awrsqrpt.sql script to find their history of execution plans.
But I'd also just look at the expensive SQL - bearing in mind, particularly, that there are very few user calls per second, yet many hundred executions per second: it strikes me that there could be quite a lot of PL/SQL going on doing something a little bit expensive many times or some PL/SQL function that calls some SQL that used to be called rarely from an SQL statement but is now (due, perhaps to a change in plan) being called much more frequently - so check SQL Ordered by Executions.
Regards
Jonathan Lewis -
Bad performance on global race-nokia 5800
Ive updated my flashlite, and all, but the performance of global race game on my nokia 5800 (just bought a few days ago) is quite bad(framerate wise) compared to my cousins' 5800. what could be the problem?
When I read battery estimates I always deduct 50% of it, that is usually a more realistic figure...the battery times are laboratory test results and usually don´t have a lot in common with "the real world"...
This isn´t just with Nokia phones btw...
About your test: I think your battery is fine, one the reasons why you couldn´t achieve the 35 hours is that you had the phone turned on...and if the phone was moving (it was constantly changing antenna signals) then the result gets worse as well...
That´s all I can contribute since I don´t have a 5800.
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good. -
I am facing a performance problem with my current application (PL/SQL packaged procedure)
My application takes data from 4 temporary tables, does a lot of validation and
puts them into permanent tables.(updates if present else inserts)
One of the temporary tables is parent table and can have 0 or more rows in
the other tables.
I have analyzed all my tables and indexes and checked all my SQLs
They all seem to be using the indexes correctly.
There are 1.6 million records combined in all 4 tables.
I am using Oracle 8i.
How do I determine what is causing the problem and which part is taking time.
Please help.
The skeleton of the code which we have written looks like this
MAIN LOOP ( 255308 records)-- Parent temporary table
-----lots of validation-----
update permanent_table1
if sql%rowcount = 0 then
insert into permanent_table1
Loop2 (0-5 records)-- child temporary table1
-----lots of validation-----
update permanent_table2
if sql%rowcount = 0 then
insert into permanent_table2
end loop2
Loop3 (0-5 records)-- child temporary table2
-----lots of validation-----
update permanent_table3
if sql%rowcount = 0 then
insert into permanent_table3
end loop3
Loop4 (0-5 records)-- child temporary table3
-----lots of validation-----
update permanent_table4
if sql%rowcount = 0 then
insert into permanent_table4
end loop4
-- COMMIT after every 3000 records
END MAIN LOOP
Thanks
Ashwin N.Do this intead of ditching the PL/SQL.
DECLARE
TYPE NumTab IS TABLE OF NUMBER(4) INDEX BY BINARY_INTEGER;
TYPE NameTab IS TABLE OF CHAR(15) INDEX BY BINARY_INTEGER;
pnums NumTab;
pnames NameTab;
t1 NUMBER(5);
t2 NUMBER(5);
t3 NUMBER(5);
BEGIN
FOR j IN 1..5000 LOOP -- load index-by tables
pnums(j) := j;
pnames(j) := 'Part No. ' || TO_CHAR(j);
END LOOP;
t1 := dbms_utility.get_time;
FOR i IN 1..5000 LOOP -- use FOR loop
INSERT INTO parts VALUES (pnums(i), pnames(i));
END LOOP;
t2 := dbms_utility.get_time;
FORALL i IN 1..5000 -- use FORALL statement
INSERT INTO parts VALUES (pnums(i), pnames(i));
get_time(t3);
dbms_output.put_line('Execution Time (secs)');
dbms_output.put_line('---------------------');
dbms_output.put_line('FOR loop: ' || TO_CHAR(t2 - t1));
dbms_output.put_line('FORALL: ' || TO_CHAR(t3 - t2));
END;
Try this link, http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/05_colls.htm#23723 -
Performance problem in Zstick report...
Hi Experts,
I am facing performance problem in Custoom Stock report of Material Management.
In this report i am fetching all the materials with its batches to get the desired output, at a time this report executes 36,000 plus unique combination of material and batch.
This report takes around 30 mins to execute. And this report is to be viewed regularly in every 2 hours.
To read the batch characteristics value I am using FM -> '/SAPMP/CE1_BATCH_GET_DETAIL'
Is there any way out to increase the performance of this report, the output of the report is in ALV.
May i have any refresh button in the report so that data may get refreshed automatically without executing it again. or is there any cache memory concept.
Note: I have declared all the itabs with type sorted, all the select queries are fetched with key and index.
Thanks
Rohit GharwarHello,
SE30 is old. Switch on trace on ST12 while running this progarm and identify where exactly most of the time is being spent. If you see high CPU time this problem with the ABAP code. You can exactly figure out the program/function module from ST12 trace where exactly time is being spent. If you see high database time in ST12, problem is with database related issue. So basically you have to analyze sql statement from performance traces in ST12. These could resolve your issue.
Yours Sincerely
Dileep -
SQL report performance problem
I have a SQL classic report in Apex 4.0.2 and database 11.2.0.2.0 with a performance problem.
The report is based on a PL/SQL function returning a query. The query is based on a view and pl/sql functions. The Apex parsing schema has select grant on the view only, not the underlying objects.
The generated query runs in 1-2 sec in sqlplus (logged in as the Apex parsing schema user), but takes many minutes in Apex. I have found, by monitoring the database sessions via TOAD, that the explain plan in the Apex and sqlplus sessions are very different.
The summary:
In sqlplus SELECT STATEMENT ALL_ROWS Cost: 3,695
In Apex SELECT STATEMENT ALL_ROWS Cost: 3,108,551
What could be the cause of this?
I found a blog and Metalink note about different explain plans for different users. They suggested to set optimizer_secure_view_merging='FALSE', but that didn't help.Hmmm, it runs fast again in SQL Workshop. I didn't expect that, because both the application and SQL Workshop use SYS.DBMS_SYS_SQL to parse the query.
Only the explain plan doesn't show anything.
To add: I changed the report source to the query the pl/sql function would generate, so the selects are the same in SQL Workshop and in the application. Still in the application it's horribly slow.
So, Apex does do something different in the application compared to SQL Workshop.
Edited by: InoL on Aug 5, 2011 4:50 PM -
Performance problem with WPF Viewer CRVS2010
Hi,
We are using Crystal Reports 2010 and the new WPF Viewer. Last week when we set up a test machine to run our integration tests (several hundred) all report tests failed (about 30 tests) with a timeout exception.
The testmachine setup:
HP DL 580 G5
WMWare ESXi 4.0
Guest OS: Windows 7 Enterprise 64-bit
Memory (guest OS): 3GB
CPU: 1
Visual Studio 2010
Crystal Reports for Visual Studio 2010 with 64 bit runtime installed
Visual Studio 2008 installed
Microsoft Office 2010 installed
Macafee antivirus
There are about 10 other virtual machines on the same HW.
I think the performance problem is related to text obejcts on a report document viewed in a WPF Viewer. I made a simple WPF GUI with 2 buttons and the first button executes a very simple report that only has a text object with a few words in it and the other button is also a simple report with only 1 text object with approx. 100 words (about 800 charchters).
The first report executes and displays almost instantly and the second report executes instantantly but displays after approx. 1 min 30 sec.
And execute in this context means that all VB.Net code runs in the compiler without any exception or performance problem. The performance problem seems to come after viewer.Show() (in the code below) has executed.
I did another test on the second report and replaced the text obejct with a formula field with the same text as the text object and this test executed and displayed the report instantly.
So the performance problem seems to have something to do with rendering of textobjects in the WPF Viewer on a virtual machine with the above setup.
I've made several tests on local machines with Windows XP (32 bit) or Winows 7 (64 bit) installed and none of them have this performance problem. Its not a critical issue for us because our users will run this application on their local PCs with Windows 7 64-bit but its a bit problematic for our project not being able to run all of our integration tests but I will probably solve this by using a local PC instead.
Here is the VB.Net code Im using to View the reports:
Private Sub LightWeight_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeight.rpt")
' Initialize Viewer
Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
viewer.Owner = Me
viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
viewer.Show()
End Sub
Private Sub LightWeightSlow_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeightSlow.rpt")
' Initialize Viewer
Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
viewer.Owner = Me
viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
viewer.Show()
End Sub
The reports are 2 empty default reports with only 1 textobject on the details section.
// ThomasSee if the KB [
[1448013 - Connecting to Oracle database. Error; Failed to load database information|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433343338333033313333%7D.do] helps.
Also the following may not hurt to have a look at (if only for ideas):
[1217021 - Err Msg: "Unable to connect invalid log on parameters" using Oracle in VS .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033323331%7D.do]
[1471508 - Logon error when connecting to Oracle database in a VS .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373331333533303338%7D.do]
[1196712 - Error: "Failed to load the oci.dll" in ASP.NET application against an Oracle database|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393336333733313332%7D.do]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Hi.
Our reporting component used JRC 1.x before we upgraded to JRC 2.x. We got two issues after upgrading.
First issue I solved already with a workaround which I published on stackoverflow.com. (1) Does anyone knows where I will find the issue management system to report this issue?
Second issue occurs big performance problem within our project. We opened a report with 6 subreports (which includes 1 upto 3 tables) in 2-4 seconds using JRC 1. If we will open same report using JRC 2, we wait upto 60 seconds.
This methods requires more time with JRC 2 comparing to JRC 1:
ReportClientDocument#open(String, int);
SubreportController#setTableLocation(String, ITable, ITable)
DatabaseController#setTableLocation(ITable, ITable)
Each invocation of one of these methods requires 2-4 seconds.
Thank you in advance.
Best regards
Thomas
(1) http://stackoverflow.com/questions/479405/replace-a-database-connection-for-subreports-with-jrchello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
try {
String reportName = "report.rpt";
ReportClientDocument clientDoc = new ReportClientDocument();
clientDoc.open(reportName, 0);
String tableAlias = "Command";
clientDoc.getDatabaseController().setDataSource(myResult("SELECT * FROM table"), tableAlias,tableAlias);
CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
crystalReportPageViewer.processHttpRequest(request, response, application, null);
} catch (ReportSDKExceptionBase e) {
e.printStackTrace();
out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4---- Error code:-2147467259 Error code name:failed
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
at org.apache.jsp.No_005f1.Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp._jspService(Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp.java:106)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.common.QueryEngineException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4
at com.crystaldecisions.reports.queryengine.Connection.bf(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.z3(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.bL(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.zM(Unknown Source)
at com.crystaldecisions.reports.queryengine.Connection.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.try(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.u7(Unknown Source)
at com.crystaldecisions.reports.datafoundation.DataFoundation.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.dfadapter.CheckDatabaseHelper.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.datafoundation.CheckDatabaseCommand.new(Unknown Source)
at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
at com.crystaldecisions.reports.common.Document.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.VerifyDatabaseCommand.new(Unknown Source)
at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
at com.crystaldecisions.reports.common.Document.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.f.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.if(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
... 39 more
Please help me and tell me why.... -
Performance problem with S873,S691,S679,S716
Hi All,
I am using tables S873,S691,S679,S716 in my report. Since these have huge data its creating performance problem. Right now i am selecting data from tables as Select single.. in Loop.. endloop.
If i try to get it out and use FOR ALL ENTRIES, its taking longer time.
I dont have all keys with me and i m trying to use index whereever possible.
Any hints, comments are really appreciable.
My code goes like this.
This is not a full code... only a part where i am fetching data from 'S' tables.
loop at i_mvke.
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO
(s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
SELECT SUM( zznslqty ) FROM s691 INTO
w_s691_net_bill_qty WHERE
Use index Z5
matnr EQ i_mvke-matnr AND
spmon EQ w_spmon AND
vrsio EQ p_versn AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr."
SELECT SUM( zznslqty ) SUM( zzninvnum ) FROM s873 INTO
(work01-zznslqty, work01-zzninvnum) WHERE
use index Z02
vkorg EQ i_mvke-vkorg AND
werks EQ p_werks AND
matnr EQ i_mvke-matnr AND
sptag IN s_billed AND
vrsio EQ p_versn AND
kunnr IN s_kunnr.
SELECT zcrdotov FROM s716 INTO s716-zcrdotov WHERE
matnr EQ i_mvke-matnr AND
sptag IN s_billed AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr AND
werks = p_werks AND
vrsio EQ p_versn.
GET THE RECORD TOTAL
ADD 1 TO w_s716_total_count.
GET THE ONTIME TOTAL
IF s716-zcrdotov = 1.
ADD 1 TO w_s716_ontime_count.
ENDIF.
ENDSELECT.
PERFORM fill_output_table.
endloop. "i_mvke
Message was edited by: Agasti Kalehi
good
wrong->
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO
(s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
write->
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO CORRESPONDING FIELDS OF TABLE I_MVKE
WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
do the changes accordingly in the below select statements. you have not post the detail report otherwise i could have help you in other select statements also.
thanks
mrutyun -
Performance problem in ABAP code
hai guys,
I created report using tables like bsis,t001 etc,( tax report).
I have performance problem in this report.
COuld you pls tell me how to analyse the report and find out the place where process is taking more memory etc.
i did abap trace and runtime analysis..but could not find out exact point.
how to do this..
i want to analysis each subroutine,internal table and query process.
could you pls give me some ideas.
ambichanThere is an excellent tool available in SAP - <b>Code Inspector.
</b>
Transaction is SCII
Try the following link and I am sure you will find a bunch of useful documents.
<a href="http://www.google.co.in/search?hl=en&safe=off&q=site%3Asdn.sap.comfiletype%3ApdfCode+Inspector&btnG=Search&meta=">ABAP Performance</a>
I use the Code Inspector to search for
a) All the select statements which are present within the loop
b) Nested Loops
c) Select query without providing criteria for primary keys, depending upon situation
d) Can the search be narrowed with extra conditions
e) Using READ .. BINARY SEARCH if internal table has lots of records.
The list is actually endless, but this is something to start with.
You can actually have a checklist, and depending upon it, go through your code. The more you adhere to checklist, you will find that, the performance would dramatically improve.
Also use <b>ST05</b> transaction, for SQL Trace and find out which select query is taking the maximum time for response.
Regards,
Subramanian V. -
Report program Performance problem
Hi All,
one object is taking 30hr for executing.some one develped this in 1998 but this time it is a big Performance problem.please some one helep what to do i am giving that code.
*--DOCUMENTATION--
Programe written by : 31.03.1998 .
Purpose : this programe updates the car status into the table zsdtab1
This programe is to be schedule in the backgroud periodically .
Querries can be fired on the table zsdtab1 to get the details of the
Car .
This programe looks at the changes made in the material master from
last updated date and the new entries in material master and updates
the tables zsdtab1 .
Changes in the Sales Order are not taken into account .
To get a fresh data set the value of zupddate in table ZSTATUS as
01.01.1998 . All the data will be refreshed from that date .
Program Changed on 23/7/2001 after version upgrade 46b by jyoti
Addition of New tables for Ibase
tables used -
tables : mara , " Material master
ausp , " Characteristics table .
zstatus , " Last updated status table .
zsdtab1 , " Central database table to be maintained .
vbap , " Sales order header table .
vbak , " Sales order item table .
kna1 , " Customer master .
vbrk ,
vbrp ,
bkpf ,
bseg ,
mseg ,
mkpf ,
vbpa ,
vbfa ,
t005t . " Country details tabe .
--NEW TABLES ADDEDFOR VERSION 4.6B--
tables : ibsymbol ,ibin , ibinvalues .
data : vatinn like ibsymbol-atinn , vatwrt like ibsymbol-atwrt ,
vatflv like ibsymbol-atflv .
*--types definition--
types : begin of mara_itab_type ,
matnr like mara-matnr ,
cuobf like mara-cuobf ,
end of mara_itab_type ,
begin of ausp_itab_type ,
atinn like ausp-atinn ,
atwrt like ausp-atwrt ,
atflv like ausp-atflv ,
end of ausp_itab_type .
data : mara_itab type mara_itab_type occurs 500 with header line ,
zsdtab1_itab like zsdtab1 occurs 500 with header line ,
ausp_itab type ausp_itab_type occurs 500 with header line ,
last_date type d ,
date type d .
data: length type i.
clear mara_itab . refresh mara_itab .
clear zsdtab1_itab . refresh zsdtab1_itab .
select single zupddate into last_date from zstatus
where programm = 'ZSDDET01' .
select matnr cuobf into (mara_itab-matnr , mara_itab-cuobf) from mara
where mtart eq 'FERT' or mtart = 'ZCBU'.
where MATNR IN MATERIA
and ERSDA IN C_Date
and MTART in M_TYP.
append mara_itab .
endselect .
loop at mara_itab.
clear zsdtab1_itab .
zsdtab1_itab-commno = mara_itab-matnr .
Get the detailed data into internal table ausp_itab .----------->>>
clear ausp_itab . refresh ausp_itab .
--change starts--
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ausp
where objek = mara_itab-matnr .
append ausp_itab .
endselect .
clear ausp_itab .
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ibin as a inner join ibinvalues as b
on ain_recno = bin_recno
inner join ibsymbol as c
on bsymbol_id = csymbol_id
where a~instance = mara_itab-cuobf .
append ausp_itab .
endselect .
----CHANGE ENDS HERE -
sort ausp_itab by atwrt.
loop at ausp_itab .
clear date .
case ausp_itab-atinn .
when '0000000094' .
zsdtab1_itab-model = ausp_itab-atwrt . " model .
when '0000000101' .
zsdtab1_itab-drive = ausp_itab-atwrt . " drive
when '0000000095' .
zsdtab1_itab-converter = ausp_itab-atwrt . "converter
when '0000000096' .
zsdtab1_itab-transmssn = ausp_itab-atwrt . "transmission
when '0000000097' .
zsdtab1_itab-colour = ausp_itab-atwrt . "colour
when '0000000098' .
zsdtab1_itab-ztrim = ausp_itab-atwrt . "trim
when '0000000103' .
*=========Sujit 14-Mar-2006
IF AUSP_ITAB-ATWRT(3) EQ 'WDB' OR AUSP_ITAB-ATWRT(3) EQ 'WDD'
OR AUSP_ITAB-ATWRT(3) EQ 'WDC' OR AUSP_ITAB-ATWRT(3) EQ 'KPD'.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT+3(14).
ELSE.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT . "chassis no
ENDIF.
zsdtab1_itab-chassis_no = ausp_itab-atwrt . "chassis no
*=========14-Mar-2006
when '0000000166' .
----25.05.04
length = strlen( ausp_itab-atwrt ).
if length < 15. "***aded by patil
zsdtab1_itab-engine_no = ausp_itab-atwrt . "ENGINE NO
else.
zsdtab1_itab-engine_no = ausp_itab-atwrt+13(14)."Aded on 21.05.04 patil
endif.
----25.05.04
when '0000000104' .
zsdtab1_itab-body_no = ausp_itab-atwrt . "BODY NO
when '0000000173' . "21.06.98
zsdtab1_itab-cockpit = ausp_itab-atwrt . "COCKPIT NO . "21.06.98
when '0000000102' .
zsdtab1_itab-dest = ausp_itab-atwrt . "destination
when '0000000105' .
zsdtab1_itab-airbag = ausp_itab-atwrt . "AIRBAG
when '0000000110' .
zsdtab1_itab-trailer_no = ausp_itab-atwrt . "TRAILER_NO
when '0000000109' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-fininspdat = date . "FIN INSP DATE
when '0000000108' .
zsdtab1_itab-entrydate = ausp_itab-atwrt . "ENTRY DATE
when '0000000163' .
zsdtab1_itab-regist_no = ausp_itab-atwrt . "REGIST_NO
when '0000000164' .
zsdtab1_itab-mech_key = ausp_itab-atwrt . "MECH_KEY
when '0000000165' .
zsdtab1_itab-side_ab_rt = ausp_itab-atwrt . "SIDE_AB_RT
when '0000000171' .
zsdtab1_itab-side_ab_lt = ausp_itab-atwrt . "SIDE_AB_LT
when '0000000167' .
zsdtab1_itab-elect_key = ausp_itab-atwrt . "ELECT_KEY
when '0000000168' .
zsdtab1_itab-head_lamp = ausp_itab-atwrt . "HEAD_LAMP
when '0000000169' .
zsdtab1_itab-tail_lamp = ausp_itab-atwrt . "TAIL_LAMP
when '0000000170' .
zsdtab1_itab-vac_pump = ausp_itab-atwrt . "VAC_PUMP
when '0000000172' .
zsdtab1_itab-sd_ab_sn_l = ausp_itab-atwrt . "SD_AB_SN_L
when '0000000174' .
zsdtab1_itab-sd_ab_sn_r = ausp_itab-atwrt . "SD_AB_SN_R
when '0000000175' .
zsdtab1_itab-asrhydunit = ausp_itab-atwrt . "ASRHYDUNIT
when '0000000176' .
zsdtab1_itab-gearboxno = ausp_itab-atwrt . "GEARBOXNO
when '0000000177' .
zsdtab1_itab-battery = ausp_itab-atwrt . "BATTERY
when '0000000178' .
zsdtab1_itab-tyretype = ausp_itab-atwrt . "TYRETYPE
when '0000000179' .
zsdtab1_itab-tyremake = ausp_itab-atwrt . "TYREMAKE
when '0000000180' .
zsdtab1_itab-tyresize = ausp_itab-atwrt . "TYRESIZE
when '0000000181' .
zsdtab1_itab-rr_axle_no = ausp_itab-atwrt . "RR_AXLE_NO
when '0000000183' .
zsdtab1_itab-ff_axl_nor = ausp_itab-atwrt . "FF_AXLE_NO_rt
when '0000000182' .
zsdtab1_itab-ff_axl_nol = ausp_itab-atwrt . "FF_AXLE_NO_lt
when '0000000184' .
zsdtab1_itab-drivairbag = ausp_itab-atwrt . "DRIVAIRBAG
when '0000000185' .
zsdtab1_itab-st_box_no = ausp_itab-atwrt . "ST_BOX_NO
when '0000000186' .
zsdtab1_itab-transport = ausp_itab-atwrt . "TRANSPORT
when '0000000106' .
zsdtab1_itab-trackstage = ausp_itab-atwrt . " tracking stage
when '0000000111' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_1 = date . " tracking date for 1.
when '0000000112' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_5 = date . " tracking date for 5.
when '0000000113' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_10 = date . "tracking date for 10
when '0000000114' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_15 = date . "tracking date for 15
when '0000000115' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_20 = date . " tracking date for 20
when '0000000116' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_25 = date . " tracking date for 25
when '0000000117' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_30 = date . "tracking date for 30
when '0000000118' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_35 = date . "tracking date for 35
when '0000000119' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_40 = date . " tracking date for 40
when '0000000120' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_45 = date . " tracking date for 45
when '0000000121' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_50 = date . "tracking date for 50
when '0000000122' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_55 = date . "tracking date for 55
when '0000000123' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_60 = date . " tracking date for 60
when '0000000124' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_65 = date . " tracking date for 65
when '0000000125' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_70 = date . "tracking date for 70
when '0000000126' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_75 = date . "tracking date for 75
when '0000000127' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_78 = date . " tracking date for 78
when '0000000203' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_79 = date . " tracking date for 79
when '0000000128' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_80 = date . " tracking date for 80
when '0000000129' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_85 = date . "tracking date for 85
when '0000000130' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_90 = date . "tracking date for 90
when '0000000131' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_95 = date . "tracking date for 95
when '0000000132' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_100 = date . " tracking date for100
when '0000000133' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_110 = date . " tracking date for110
when '0000000134' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_115 = date . "tracking date for 115
when '0000000135' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_120 = date . "tracking date for 120
when '0000000136' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_105 = date . "tracking date for 105
when '0000000137' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_1 = date . "plan trk date for 1
when '0000000138' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_5 = date . "plan trk date for 5
when '0000000139' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_10 = date . "plan trk date for 10
when '0000000140' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_15 = date . "plan trk date for 15
when '0000000141' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_20 = date . "plan trk date for 20
when '0000000142' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_25 = date . "plan trk date for 25
when '0000000143' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_30 = date . "plan trk date for 30
when '0000000144' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_35 = date . "plan trk date for 35
when '0000000145' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_40 = date . "plan trk date for 40
when '0000000146' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_45 = date . "plan trk date for 45
when '0000000147' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_50 = date . "plan trk date for 50
when '0000000148' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_55 = date . "plan trk date for 55
when '0000000149' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_60 = date . "plan trk date for 60
when '0000000150' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_65 = date . "plan trk date for 65
when '0000000151' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_70 = date . "plan trk date for 70
when '0000000152' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_75 = date . "plan trk date for 75
when '0000000153' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_78 = date . "plan trk date for 78
when '0000000202' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_79 = date . "plan trk date for 79
when '0000000154' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_80 = date . "plan trk date for 80
when '0000000155' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_85 = date . "plan trk date for 85
when '0000000156' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_90 = date . "plan trk date for 90
when '0000000157' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_95 = date . "plan trk date for 95
when '0000000158' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_100 = date . "plan trk date for 100
when '0000000159' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_105 = date . "plan trk date for 105
when '0000000160' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_110 = date . "plan trk date for 110
when '0000000161' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_115 = date . "plan trk date for 115
when '0000000162' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_120 = date . "plan trk date for 120
********Additional fields / 24.05.98**********************************
when '0000000099' .
case ausp_itab-atwrt .
when '540' .
zsdtab1_itab-roll_blind = 'X' .
when '482' .
zsdtab1_itab-ground_clr = 'X' .
when '551' .
zsdtab1_itab-anti_theft = 'X' .
when '882' .
zsdtab1_itab-anti_tow = 'X' .
when '656' .
zsdtab1_itab-alloy_whel = 'X' .
when '265' .
zsdtab1_itab-del_class = 'X' .
when '280' .
zsdtab1_itab-str_wheel = 'X' .
when 'CDC' .
zsdtab1_itab-cd_changer = 'X' .
when '205' .
zsdtab1_itab-manual_eng = 'X' .
when '273' .
zsdtab1_itab-conn_handy = 'X' .
when '343' .
zsdtab1_itab-aircleaner = 'X' .
when '481' .
zsdtab1_itab-metal_sump = 'X' .
when '533' .
zsdtab1_itab-speaker = 'X' .
when '570' .
zsdtab1_itab-arm_rest = 'X' .
when '580' .
zsdtab1_itab-aircond = 'X' .
when '611' .
zsdtab1_itab-exit_light = 'X' .
when '613' .
zsdtab1_itab-headlamp = 'X' .
when '877' .
zsdtab1_itab-readlamp = 'X' .
when '808' .
zsdtab1_itab-code_ckd = 'X' .
when '708' .
zsdtab1_itab-del_prt_lc = 'X' .
when '593' .
zsdtab1_itab-ins_glass = 'X' .
when '955' .
zsdtab1_itab-zelcl = 'Elegance' .
when '593' .
zsdtab1_itab-zelcl = 'Classic' .
endcase .
endcase .
endloop .
*--Update the sales data .--
perform get_sales_order using mara_itab-matnr .
perform get_cartype using mara_itab-matnr .
append zsdtab1_itab .
endloop.
<<<
loop at zsdtab1_itab .
if zsdtab1_itab-cartype <> 'W-203'
or zsdtab1_itab-cartype <> 'W-210'
or zsdtab1_itab-cartype <> 'W-211'.
clear zsdtab1_itab-zelcl.
endif.
SELECT SINGLE * FROM ZSDTAB1 WHERE COMMNO = MARA_ITAB-MATNR .
select single * from zsdtab1 where commno = zsdtab1_itab-commno.
if sy-subrc <> 0 .
insert into zsdtab1 values zsdtab1_itab .
else .
update zsdtab1 set :vbeln = zsdtab1_itab-vbeln
bill_doc = zsdtab1_itab-bill_doc
dest = zsdtab1_itab-dest
lgort = zsdtab1_itab-lgort
ship_tp = zsdtab1_itab-ship_tp
country = zsdtab1_itab-country
kunnr = zsdtab1_itab-kunnr
vkbur = zsdtab1_itab-vkbur
customer = zsdtab1_itab-customer
city = zsdtab1_itab-city
region = zsdtab1_itab-region
model = zsdtab1_itab-model
drive = zsdtab1_itab-drive
converter = zsdtab1_itab-converter
transmssn = zsdtab1_itab-transmssn
colour = zsdtab1_itab-colour
ztrim = zsdtab1_itab-ztrim
commno = zsdtab1_itab-commno
trackstage = zsdtab1_itab-trackstage
chassis_no = zsdtab1_itab-chassis_no
engine_no = zsdtab1_itab-engine_no
body_no = zsdtab1_itab-body_no
cockpit = zsdtab1_itab-cockpit
airbag = zsdtab1_itab-airbag
trailer_no = zsdtab1_itab-trailer_no
fininspdat = zsdtab1_itab-fininspdat
entrydate = zsdtab1_itab-entrydate
regist_no = zsdtab1_itab-regist_no
mech_key = zsdtab1_itab-mech_key
side_ab_rt = zsdtab1_itab-side_ab_rt
side_ab_lt = zsdtab1_itab-side_ab_lt
elect_key = zsdtab1_itab-elect_key
head_lamp = zsdtab1_itab-head_lamp
tail_lamp = zsdtab1_itab-tail_lamp
vac_pump = zsdtab1_itab-vac_pump
sd_ab_sn_l = zsdtab1_itab-sd_ab_sn_l
sd_ab_sn_r = zsdtab1_itab-sd_ab_sn_r
asrhydunit = zsdtab1_itab-asrhydunit
gearboxno = zsdtab1_itab-gearboxno
battery = zsdtab1_itab-battery
tyretype = zsdtab1_itab-tyretype
tyremake = zsdtab1_itab-tyremake
tyresize = zsdtab1_itab-tyresize
rr_axle_no = zsdtab1_itab-rr_axle_no
ff_axl_nor = zsdtab1_itab-ff_axl_nor
ff_axl_nol = zsdtab1_itab-ff_axl_nol
drivairbag = zsdtab1_itab-drivairbag
st_box_no = zsdtab1_itab-st_box_no
transport = zsdtab1_itab-transport
OPTIONS-
roll_blind = zsdtab1_itab-roll_blind
ground_clr = zsdtab1_itab-ground_clr
anti_theft = zsdtab1_itab-anti_theft
anti_tow = zsdtab1_itab-anti_tow
alloy_whel = zsdtab1_itab-alloy_whel
del_class = zsdtab1_itab-del_class
str_wheel = zsdtab1_itab-str_wheel
cd_changer = zsdtab1_itab-cd_changer
manual_eng = zsdtab1_itab-manual_eng
conn_handy = zsdtab1_itab-conn_handy
aircleaner = zsdtab1_itab-aircleaner
metal_sump = zsdtab1_itab-metal_sump
speaker = zsdtab1_itab-speaker
arm_rest = zsdtab1_itab-arm_rest
aircond = zsdtab1_itab-aircond
exit_light = zsdtab1_itab-exit_light
headlamp = zsdtab1_itab-headlamp
readlamp = zsdtab1_itab-readlamp
code_ckd = zsdtab1_itab-code_ckd
del_prt_lc = zsdtab1_itab-del_prt_lc
ins_glass = zsdtab1_itab-ins_glass
dat_trk_1 = zsdtab1_itab-dat_trk_1
dat_trk_5 = zsdtab1_itab-dat_trk_5
dat_trk_10 = zsdtab1_itab-dat_trk_10
dat_trk_15 = zsdtab1_itab-dat_trk_15
dat_trk_20 = zsdtab1_itab-dat_trk_20
dat_trk_25 = zsdtab1_itab-dat_trk_25
dat_trk_30 = zsdtab1_itab-dat_trk_30
dat_trk_35 = zsdtab1_itab-dat_trk_35
dat_trk_40 = zsdtab1_itab-dat_trk_40
dat_trk_45 = zsdtab1_itab-dat_trk_45
dat_trk_50 = zsdtab1_itab-dat_trk_50
dat_trk_55 = zsdtab1_itab-dat_trk_55
dat_trk_60 = zsdtab1_itab-dat_trk_60
dat_trk_65 = zsdtab1_itab-dat_trk_65
dat_trk_70 = zsdtab1_itab-dat_trk_70
dat_trk_75 = zsdtab1_itab-dat_trk_75
dat_trk_78 = zsdtab1_itab-dat_trk_78
dat_trk_79 = zsdtab1_itab-dat_trk_79
dat_trk_80 = zsdtab1_itab-dat_trk_80
dat_trk_85 = zsdtab1_itab-dat_trk_85
dat_trk_90 = zsdtab1_itab-dat_trk_90
dat_trk_95 = zsdtab1_itab-dat_trk_95
dattrk_100 = zsdtab1_itab-dattrk_100
dattrk_105 = zsdtab1_itab-dattrk_105
dattrk_110 = zsdtab1_itab-dattrk_110
dattrk_115 = zsdtab1_itab-dattrk_115
dattrk_120 = zsdtab1_itab-dattrk_120
pdt_tk_1 = zsdtab1_itab-pdt_tk_1
pdt_tk_5 = zsdtab1_itab-pdt_tk_5
pdt_tk_10 = zsdtab1_itab-pdt_tk_10
pdt_tk_15 = zsdtab1_itab-pdt_tk_15
pdt_tk_20 = zsdtab1_itab-pdt_tk_20
pdt_tk_25 = zsdtab1_itab-pdt_tk_25
pdt_tk_30 = zsdtab1_itab-pdt_tk_30
pdt_tk_35 = zsdtab1_itab-pdt_tk_35
pdt_tk_40 = zsdtab1_itab-pdt_tk_40
pdt_tk_45 = zsdtab1_itab-pdt_tk_45
pdt_tk_50 = zsdtab1_itab-pdt_tk_50
pdt_tk_55 = zsdtab1_itab-pdt_tk_55
pdt_tk_60 = zsdtab1_itab-pdt_tk_60
pdt_tk_65 = zsdtab1_itab-pdt_tk_65
pdt_tk_70 = zsdtab1_itab-pdt_tk_70
pdt_tk_75 = zsdtab1_itab-pdt_tk_75
pdt_tk_78 = zsdtab1_itab-pdt_tk_78
pdt_tk_79 = zsdtab1_itab-pdt_tk_79
pdt_tk_80 = zsdtab1_itab-pdt_tk_80
pdt_tk_85 = zsdtab1_itab-pdt_tk_85
pdt_tk_90 = zsdtab1_itab-pdt_tk_90
pdt_tk_95 = zsdtab1_itab-pdt_tk_95
pdt_tk_100 = zsdtab1_itab-pdt_tk_100
pdt_tk_105 = zsdtab1_itab-pdt_tk_105
pdt_tk_110 = zsdtab1_itab-pdt_tk_110
pdt_tk_115 = zsdtab1_itab-pdt_tk_115
pdt_tk_120 = zsdtab1_itab-pdt_tk_120
cartype = zsdtab1_itab-cartype
zelcl = zsdtab1_itab-zelcl
excise_no = zsdtab1_itab-excise_no
where commno = zsdtab1_itab-commno .
Update table .---------<<<
endif .
endloop .
perform update_excise_date .
perform update_post_goods_issue_date .
perform update_time.
*///////////////////// end of programe /////////////////////////////////
Get sales data -
form get_sales_order using matnr .
data : corr_vbeln like vbrk-vbeln .
ADDED BY ADITYA / 22.06.98 **************************************
perform get_order using matnr .
select single vbeln lgort into (zsdtab1_itab-vbeln , zsdtab1_itab-lgort)
from vbap where matnr = matnr . " C-22.06.98
from vbap where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
************Get the Excise No from Allocation Field*******************
select single * from zsdtab1 where commno = matnr .
if zsdtab1-excise_no = '' .
select * from vbrp where matnr = matnr .
select single vbeln into corr_vbeln from vbrk where
vbeln = vbrp-vbeln and vbtyp = 'M'.
if sy-subrc eq 0.
select single * from vbrk where vbtyp = 'N'
and sfakn = corr_vbeln. "cancelled doc.
if sy-subrc ne 0.
select single * from vbrk where vbeln = corr_vbeln.
if sy-subrc eq 0.
data : year(4) .
move sy-datum+0(4) to year .
select single * from bkpf where awtyp = 'VBRK' and awkey = vbrk-vbeln
and bukrs = 'MBIL' and gjahr = year .
if sy-subrc = 0 .
select single * from bseg where bukrs = 'MBIL' and belnr = bkpf-belnr
and gjahr = year and koart = 'D' and
shkzg = 'S' .
zsdtab1_itab-excise_no = bseg-zuonr .
endif .
endif.
endif.
endif.
endselect.
endif .
select single kunnr vkbur into (zsdtab1_itab-kunnr ,
zsdtab1_itab-vkbur) from vbak
where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
select single name1 ort01 regio into (zsdtab1_itab-customer ,
zsdtab1_itab-city , zsdtab1_itab-region) from kna1
where kunnr = zsdtab1_itab-kunnr .
endif.
Get Ship to Party **************************************************
select single * from vbpa where vbeln = zsdtab1_itab-vbeln and
parvw = 'WE' .
if sy-subrc = 0 .
zsdtab1_itab-ship_tp = vbpa-kunnr .
Get Destination Country of Ship to Party .************
select single * from kna1 where kunnr = vbpa-kunnr .
if sy-subrc = 0 .
select single * from t005t where land1 = kna1-land1
and spras = 'E' .
if sy-subrc = 0 .
zsdtab1_itab-country = t005t-landx .
endif .
endif .
endif .
endif .
endform. " GET_SALES
form update_time.
update zstatus set zupddate = sy-datum
uzeit = sy-uzeit
where programm = 'ZSDDET01' .
endform. " UPDATE_TIME
*& Form DATE_CONVERT
form date_convert using atflv changing date .
data : dt(8) , dat type i .
dat = atflv .
dt = dat .
date = dt .
endform. " DATE_CONVERT
*& Form UPDATE_POST_GOODS_ISSUE_DATE
form update_post_goods_issue_date .
types : begin of itab1_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab1_type .
data : itab1 type itab1_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-postdate = '00000000' .
refresh itab1 . clear itab1 .
select * from mseg where matnr = mara_itab-matnr and bwart = '601' .
itab1-mblnr = mseg-mblnr .
append itab1 .
endselect .
loop at itab1 .
select single * from mkpf where mblnr = itab1-mblnr .
if sy-subrc = 0 .
itab1-budat = mkpf-budat .
modify itab1 .
endif .
endloop .
sort itab1 by budat .
read table itab1 index 1 .
if sy-subrc = 0 .
update zsdtab1 set postdate = itab1-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_POST_GOODS_ISSUE_DATE
*& Form UPDATE_EXCISE_DATE
form update_excise_date.
types : begin of itab2_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab2_type .
data : itab2 type itab2_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-excise_dat = '00000000' .
refresh itab2 . clear itab2 .
select * from mseg where matnr = mara_itab-matnr and
( bwart = '601' or bwart = '311' ) .
itab2-mblnr = mseg-mblnr .
append itab2 .
endselect .
loop at itab2 .
select single * from mkpf where mblnr = itab2-mblnr .
if sy-subrc = 0 .
itab2-budat = mkpf-budat .
modify itab2 .
endif .
endloop .
sort itab2 by budat .
read table itab2 index 1 .
if sy-subrc = 0 .
update zsdtab1 set excise_dat = itab2-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_EXCISE_DATE
form get_order using matnr .
types : begin of itab_type ,
vbeln like vbap-vbeln ,
posnr like vbap-posnr ,
end of itab_type .
data : itab type itab_type occurs 10 with header line .
refresh itab . clear itab .
select * from vbap where matnr = mara_itab-matnr .
itab-vbeln = vbap-vbeln .
itab-posnr = vbap-posnr .
append itab .
endselect .
loop at itab .
select single * from vbak where vbeln = itab-vbeln .
if vbak-vbtyp <> 'C' .
delete itab .
endif .
endloop .
loop at itab .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'H' .
if sy-subrc = 0 .
delete itab .
endif .
endloop .
clear : zsdtab1_itab-vbeln , zsdtab1_itab-bill_doc .
loop at itab .
zsdtab1_itab-vbeln = itab-vbeln .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'M' .
if sy-subrc = 0 .
zsdtab1_itab-bill_doc = vbfa-vbeln .
endif .
endloop .
endform .
*& Form GET_CARTYPE
form get_cartype using matnr .
select single * from mara where matnr = matnr .
zsdtab1_itab-cartype = mara-satnr .
endform. " GET_CARTYPEHi,
I have analysed your program and i would like to share following points for better performance of this report :
(a) Use the field Names instead of Select * or Select Single * as if you use the field names it will consume less amount of resources inside the loop as well as you have lot many Select Single * and u r using very big tables like VBAP and many more.
(b) Trace on ST05 which particular query is mostly effecting your system or use ST12 in current mode to trace for less inputs which run the report for 20-30 min so that we get an idea which queries are effecting the system and taking a lot of time.
(c) In Case of internal tables sort the data properly and use binary search for getting the data.
I think this will help.
Thanks and Regards,
Harsh
Maybe you are looking for
-
Install problems Flash Player 9
I had adobe flash player installed last week (and previously). Some things weren't working, so i uninstalled, reinstalled. Today, I went to do two separate things using adobe flash player, and it wouldn't work. I uninstalled again, went to re-install
-
Exercising/ Running Marathon with Ipod Classic
Hi there and sorry in advance if this is a tired and already answered question. But I looked and could not find a similar topic. I run extensively 5 mile a day, even in winters. And workout extensively too, plyometrics, etc. And I am wanting to buy a
-
How can I fix this?
-
Hello everyone I want to Calculate the rise time and settling time for a second order control system What can be the one way is to design Using the Control design and simulation module and then using control design and then going for CD paramaetric t
-
Wasting ink on a Photosmart c7280
sorry to hijack but i cant start a new thread for some reason. i have a similar problem but my printer is a c7280. ive had to replace several ink cartridges in color before i had to change the black one. i only really use the printer for school assig