Performance problem when using CAPS LOCK piano input

Dear reader,
I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
Thanks and regards,
Tim Metz

Does your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?

Similar Messages

Performance problems when using Premiere Elements for photo slideshows

Hello,
I had been using Premiere Elements 9 (PE9) to make a simple slideshow for my parents from their vacation trip and I ran into some serious performance problems. I had used it to create similar projects before, but not nearly as big. This one is like 260 photos, so basically it is 260 seperate clips. I have a POWERHOUSE workstation (see below) so it isn't my PC. Even when PE9 crashes, looking at my performance monitor my CPU and RAM aren't even halfway being utilized. I finally switched to Windows Movie Maker of all things and it worked seemlessly, amazing really. I'm wondering if I was just using PE9 for something other than what it was designed for since there weren't really any video clips, just a ton of photos that I made into video clips, if that makes sense. Based upon my experience with this so far, I can't imagine using PE9 anymore for anything really. I might have the need for a more professional video editing program in the near future, although it does seem like PE has a lot of features. How can I make sure it utilizes my workstation to its full potential? Here are my specs:
PC
Intel Core i7-2600K 4.6 GHz Overclocked
ASUS P8P67 Deluxe Motherboard
AMD Firepro V8800 Video Card
Crucial 128 GB SATA 6Gb/s Solid State Drive (Operating System)
Corsair Vengeance 16GB (4x4GB) Memory
Corsair H60 Liquid CPU Cooler
Corsair Professional Series Gold AX850 Power Supply
Graphite Series 600T Mid-Tower Case
Western Digital Caviar Black 1 TB SATA III Hard Drive
Western Digital Caviar Black 2 TB SATA III Hard Drive
Western Digital Green 3 TB SATA III Hard Drive
Logitech Wireless Gaming Mouse G700
I don’t play any games but it’s a great productivity mouse with 13 customizable buttons
Wacom Intuos5 Pen Tablet
Yes, this system is blazingly fast. I have yet to feel it slow down, even with Photoshop, Lightroom, InDesign, Illustrator and numerous other apps running at the same time. HOWEVER, Premiere Elements 9 has crashed NUMERUOS times, every time my system wasn't even close to being fully taxed.
Monitors – All run on the ATI V8800
Dell Ultra Sharp 30 inch
Samsung 27 Inch
HAANS-G 28 Inch
Herman Miller Embody Ergonomic Chair (one of my favorite items)

Andy,
There ARE some differences between PrE and PrPro w/ an approved CUDA-capable and MPE hardware acceleration-enabled nVidia video card, but those differences show up ONLY in the quality of the Scaling. The processing overhead is almost exactly the same, when it comes to handling the extra pixels.
As of PrPro CS 5, two things changed:
The max. size of Still Images went up from 4096 x 4096 pixels, to quite a bit larger (cannot recall the numbers now).
The Scaling algorithms have been improved, though ONLY with the correct nVidia cards, with MPE hardware support enabled.
Now, there CAN be another consideration, between the two programs, in that PrPro CS 5 - CS 6, are 64-bit ONLY, so one benefits from the computer and OS to run it. PrE can be either 32-bit, or 64-bit, so one might, or might not, be taking advantage of the 64-bit program and OS. Still, the processing overhead will be almost identical, it's just that the 64-bit OS can spread it around a bit.
I still recommend Scaling the large Still Images in PS, prior to Import, to keep that processing overhead as low as is possible. Scaled Still Images work just fine, and I have one Project with 3000+ Scaled Still Images, that edits just fine in PrPro, even on my older 32-bit workstation. Testing that same machine, and PrPro some years ago, I could ONLY work with up to 5 - 4096 x 4096 Stills, before things ground to a crawl.
Now, Adobe AfterEffects handles large Still Images differently, so I just moved that test Project to AE, and added another 20 large Images, which edited just fine. IIRC, AE can handle Still Images up to 10K x 10K pixels, and that might have gone up, as of CS 5.
Good luck, and hope that helps,
Hunt

Query performance problem when using hierarchies

Hello All,
I've a query which is built on a hieracrhy with the following structure for eg.
A
|_B
| |_L1
|
|_C
|_L2
When I restrict the query to hierarchy levels B and C simultaneously the query executes fine. But when i directly restrict the query to heirarchy level A , the query runs endlessly.
Could some one please help me out as to why this is the case ?
I don't have aggregates built on any of the hierarchy level.
Best Regards,
Sanjay

Hi Roberto,
thanks for your response. However, the problem is not solved even after applying the suggestions of the note 738098 :(. These queries used to execute fine until yesterday and there have been no major additions to the hierarchy. Please let me know if there is any thing else that can be done. We are planning to bounce the system and see if there are any performance improvements.
PS: I've awarded points to you nevertheless, as the option suggested in the note seems useful and should be tried in case of these kind of performance issues
Best Regards,
Sanjay

Performance problem when using in operator

Hi,
I have two tables (master - detail): NETZ - NETZPART (detail table).
The following query is very slow:
select NP.*
from NETZPART NP join NETZ N on N.NETZID = NP.NETZID and N.ISVIRTUELL <> 'T'
where NP.NETZID in (40446621,40446622)
order by ACHSSEGMENTID, STARTDISTANZ
I tried different changes but it's always slow (left join, without join)
I have primary key indices on both tables and an index for NETZPART (NETZID).
What am I doing wrong?
cu Christian

Welcome to the forums!
With the information provided we can't really say much. Please visit these threads and provide the requested information.
{message:id=9360002}
{message:id=9360003}

The Adobe Photoshop CC 2014 - I can't use becouse is LOOCK DOWN the computer - When USE is LOCK the computer so everything is LOCKING can't even move the mouse + need to restart the computer and use Photoshop CC 64 bit instead - have this problem for abo

The Adobe Photoshop CC 2014 - I can't use becouse is LOOCK DOWN the computer -
When USE is LOCK the computer so everything is LOCKING can't even move the mouse + need to restart the computer and use Photoshop CC 64 bit instead - have this problem for about 6 months ...

Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325
Are you trying to use a 32bit version (I did not even know there is one for Photoshop CC 2014)?
If so – why?

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks Pete

Hi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete

Problem when using About Operator in Contains Query

Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id           NUMBER(10)      NOT NULL,
name         VARCHAR2(200)   NOT NULL,
description VARCHAR2(4000) NOT NULL,
price        NUMBER(7,2)     NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
      1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
      1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
      0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
      0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AM

Hello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck!

Performance problem when running a personalization rule

We have a serious performance problem when running a personalization rule.
The rule is defined like this:
Definition
Rule Type: Content
Content Type: LoadedData
Name: allAnnouncements
Description: all announcements of types: announcement, deal, new release,
tip of the day
If the user has the following characteristics:
And when:
Then display content based on:
(CONTENT.RessourceType == announcement) or (CONTENT.RessourceType == deal)
or (CONTENT.RessourceType == new release) or (CONTENT.RessourceType == tip
of the week)
and CONTENT.endDate > now
and CONTENT.startDate <= now
END---------------------------------
and is invoked in a JSP page like this:
<%String customQuery = "(CONTENT.language='en') && (CONTENT.Country='nl'
|| CONTENT.Country='*' ) && (!(CONTENT.excludeIds like '*#7#*')) &&
(CONTENT.userType ='retailer')"%>
<pz:contentselector
id="cdocs"
ruleSet="jdbc://com.beasys.commerce.axiom.reasoning.rules.RuleSheetDefinitio
nHome/b2boost"
rule="allAnnouncements"
sortBy="startDate DESC"
query="<%=customQuery%>"
contentHome="<%=ContentHelper.DEF_DOCUMENT_MANAGER_HOME%>" />
The customQuery is constructed at runtime from user information, and cannot
be constructed with rules
administration interface.
When I turn on debugging mode, I can see that the rule is parsed and a SQL
query is generated, with the correct parameters.
This is the generated query (with the substitutions):
select
WLCS_DOCUMENT.ID,
WLCS_DOCUMENT.DOCUMENT_SIZE,
WLCS_DOCUMENT.VERSION,
WLCS_DOCUMENT.AUTHOR,
WLCS_DOCUMENT.CREATION_DATE,
WLCS_DOCUMENT.LOCKED_BY,
WLCS_DOCUMENT.MODIFIED_DATE,
WLCS_DOCUMENT.MODIFIED_BY,
WLCS_DOCUMENT.DESCRIPTION,
WLCS_DOCUMENT.COMMENTS,
WLCS_DOCUMENT.MIME_TYPE
FROM
WLCS_DOCUMENT
WHERE
((((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'announcement'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'deal'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'new release'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = ''
AND WLCS_DOCUMENT_METADATA.VALUE = 'tip of the week'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'press release'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'endDate'
AND WLCS_DOCUMENT_METADATA.VALUE > '2001-10-22 15:53:14.768'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'startDate'
AND WLCS_DOCUMENT_METADATA.VALUE <= '2001-10-22 15:53:14.768'
AND ((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'language'
AND WLCS_DOCUMENT_METADATA.VALUE = 'en'
AND ((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'Country'
AND WLCS_DOCUMENT_METADATA.VALUE = 'nl'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'Country'
AND WLCS_DOCUMENT_METADATA.VALUE = '*'
AND NOT (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'excludeIds'
AND WLCS_DOCUMENT_METADATA.VALUE LIKE '%#7#%' ESCAPE '\'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'userType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'retailer'
At this moment, the server makes the user wait more than 10 min for the
query to execute.
This is what I found out about the problem:
1)When I run the query on an Oracle SQL client (We are using Oracle 8.1.7.0)
, it takes 5-10 seconds.
2)If I remove the second term of (CONTENT.Country='nl' ||
CONTENT.Country='*' ) in the custom query,
thus retricting to CONTENT.Country='nl', the performance is OK.
3)There are currently more or less 130 records in the DB that have
Country='*'
4)When I run the page on our QA server (solaris), which is at the same time
our Oracle server,
the response time is OK, but if I run it on our development server (W2K),
response time is ridiculously long.
5)The problem happens also if I add the term (CONTENT.Country='nl' ||
CONTENT.Country='*' )
to the rule definition, and I remove this part from the custom query.
Am I missing something? Am I using the personalization server correctly?
Is this performance difference between QA and DEV due to differences in the
OS?
Thank you,
Luis Muñiz

Luis,
I think you are working through Support on this one, so hopefully you are in good
shape.
For others who are seeing this same performance issue with the reference CM implementation,
there is a patch available via Support for the 3.2 and 3.5 releases that solves
this problem.
This issue is being tracked internally as CR060645 for WLPS 3.2 and CR055594 for
WLPS 3.5.
Regards,
PJL
"Luis Muniz" <[email protected]> wrote:
We have a serious performance problem when running a personalization
rule.
The rule is defined like this:
Definition
Rule Type: Content
Content Type: LoadedData
Name: allAnnouncements
Description: all announcements of types: announcement, deal, new release,
tip of the day
If the user has the following characteristics:
And when:
Then display content based on:
(CONTENT.RessourceType == announcement) or (CONTENT.RessourceType ==
deal)
or (CONTENT.RessourceType == new release) or (CONTENT.RessourceType ==
tip
of the week)
and CONTENT.endDate > now
and CONTENT.startDate <= now
END---------------------------------
and is invoked in a JSP page like this:
<%String customQuery = "(CONTENT.language='en') && (CONTENT.Country='nl'
|| CONTENT.Country='*' ) && (!(CONTENT.excludeIds like '*#7#*')) &&
(CONTENT.userType ='retailer')"%>
<pz:contentselector
id="cdocs"
ruleSet="jdbc://com.beasys.commerce.axiom.reasoning.rules.RuleSheetDefinitio
nHome/b2boost"
rule="allAnnouncements"
sortBy="startDate DESC"
query="<%=customQuery%>"
contentHome="<%=ContentHelper.DEF_DOCUMENT_MANAGER_HOME%>" />
The customQuery is constructed at runtime from user information, and
cannot
be constructed with rules
administration interface.
When I turn on debugging mode, I can see that the rule is parsed and
a SQL
query is generated, with the correct parameters.
This is the generated query (with the substitutions):
select
WLCS_DOCUMENT.ID,
WLCS_DOCUMENT.DOCUMENT_SIZE,
WLCS_DOCUMENT.VERSION,
WLCS_DOCUMENT.AUTHOR,
WLCS_DOCUMENT.CREATION_DATE,
WLCS_DOCUMENT.LOCKED_BY,
WLCS_DOCUMENT.MODIFIED_DATE,
WLCS_DOCUMENT.MODIFIED_BY,
WLCS_DOCUMENT.DESCRIPTION,
WLCS_DOCUMENT.COMMENTS,
WLCS_DOCUMENT.MIME_TYPE
FROM
WLCS_DOCUMENT
WHERE
((((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'announcement'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'deal'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'new release'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = ''
AND WLCS_DOCUMENT_METADATA.VALUE = 'tip of the week'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'press release'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'endDate'
AND WLCS_DOCUMENT_METADATA.VALUE > '2001-10-22 15:53:14.768'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'startDate'
AND WLCS_DOCUMENT_METADATA.VALUE <= '2001-10-22 15:53:14.768'
AND ((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'language'
AND WLCS_DOCUMENT_METADATA.VALUE = 'en'
AND ((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'Country'
AND WLCS_DOCUMENT_METADATA.VALUE = 'nl'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'Country'
AND WLCS_DOCUMENT_METADATA.VALUE = '*'
AND NOT (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'excludeIds'
AND WLCS_DOCUMENT_METADATA.VALUE LIKE '%#7#%' ESCAPE '\'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'userType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'retailer'
At this moment, the server makes the user wait more than 10 min for the
query to execute.
This is what I found out about the problem:
1)When I run the query on an Oracle SQL client (We are using Oracle 8.1.7.0)
, it takes 5-10 seconds.
2)If I remove the second term of (CONTENT.Country='nl' ||
CONTENT.Country='*' ) in the custom query,
thus retricting to CONTENT.Country='nl', the performance is OK.
3)There are currently more or less 130 records in the DB that have
Country='*'
4)When I run the page on our QA server (solaris), which is at the same
time
our Oracle server,
the response time is OK, but if I run it on our development server (W2K),
response time is ridiculously long.
5)The problem happens also if I add the term (CONTENT.Country='nl' ||
CONTENT.Country='*' )
to the rule definition, and I remove this part from the custom query.
Am I missing something? Am I using the personalization server correctly?
Is this performance difference between QA and DEV due to differences
in the
OS?
Thank you,
Luis Muñiz

Performance problem when printing - table TSPEVJOB big size

Hi,
in a SAP ERP system there is performance problem when printing because table TSPEVJOB has many millions of entries.
This table has reached a considerable size (about 90 Gb); db size is 200 Gb.
Standard reports have been scheduled correctly and kernel of SAP ERP system is updated.
I've tried to scheduled report RSPO1041 (instead of RSPO0041) to reduce entries but it is not possible run it during normal operations because it locks the printing system.
Do you know why this table has increased ?
Are there any reports to clean this table or other methods ?
Thanks.
Maurizio Manera

Dear,
Please see the Note 706478 - Preventing Basis tables from increasing considerably and
Note 195157 - Application log: Deletion of logs.
Note 1566659 - Table TSPEVJOB is filled excessively
Note 1293472 - Spool work process hangs on semaphore 43
Note 1362343 - Deadlocks in table TSP02 and TSPEVJOB
Note 996455 - Deadlocks on TSP02 or TSPEVJOB when you delete
For more information see the below link as,
http://www.sqlservercurry.com/2008/04/how-to-delete-records-from-large-table.html
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=91179
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83525
If any doubts Let me know.
Thomas
Edited by: thomas_raja on Aug 7, 2011 12:29 PM

Coercion problem when using Shared Variable

I have a curious coercion problem when using Shared Variables. I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached). I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef. So far, so good. I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef. However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable. Why? How do I get rid of the dot? [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
On a related note, the code seems to work. This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator. So it does appear to work. The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
Bob Schor
Attachments:
Coercion Problem1.zip ‏38 KB

Hello Bob,
I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
Enjoy the holiday
Regards,
Erik J.
Applications Engineer
National Instruments

NLS support problems when using AL32UTF8 in dads.conf

Hello,
Following a post by Joel Kallman, in one of the forum threads, about the mandatory use of AL32UTF8 in dads.conf, when running HTML DB v2.0, I changed my PlsqlNLSLanguage parameter accordingly.
Prior to the change, I experienced some problems when using non-English characters some application items appeared as gibberish when contained non-English characters, and the LIKE operator didn't perform as expected. After the change, it all seems to work OK, but now I have a different problem.
All the non-English characters in my HTML page source code appears as gibberish. On screen, at run time, everything display correctly, but the source code seems to be corrupted. It is very difficult, and very annoying to debug the pages that way. Is there a way to enjoy both worlds Using AL32UTF8 in the dads.conf, as required, and still getting a coherent HTML source code, containing non-English characters?
Thanks,
Arie.

Joel,
I use the following settings and they work fine for me:
Operating system:
LANG=de_DE
LANGVAR=de_DE.UTF-8
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
daust:oracle[o1020]> uname -a
Linux daust.opal-consulting.de 2.4.21-37.EL #1 Wed Sep 7 13:35:21 EDT 2005 i686 i686 i386 GNU/Linux
daust:oracle[o1020]> cat /etc/redhat-release
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
daust:oracle[o1020]>
marvel.conf:
<Location /pls/htmldb>
 Order deny,allow
 PlsqlDocumentPath docs
 AllowOverride None
 PlsqlDocumentProcedure wwv_flow_file_manager.process_download
 PlsqlDatabaseConnectString localhost:1521:o1020
 PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
 PlsqlAuthenticationMode Basic
 SetHandler pls_handler
 PlsqlDocumentTablename wwv_flow_file_objects$
 PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
 PlsqlDefaultPage htmldb
 PlsqlDatabasePassword @BZvJYqadreElOqj5poCB5gE=
 Allow from all
</Location>
Database:
daust:oracle[o1020]> sqlplus "/ as sysdba"
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0####################
Using AL32UTF8 resulted in the same problem as described ( and fixed ) here: Re: Strange - HTML not written correctly
So, what is the proper configuration of the DAD, perhaps there are different ones for Unicode instances and non-Unicode instances.
~Dietmar.

Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. ge

Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. get "authentication error". Sometimes will get a very quick dialogue box showing the gmail login screen but then disappears. I use firefox and IE

Hi Rodney
Welcome to Apple Discussions
This sounds like one of those "oddities", contributed to by a few sources.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
Wondering if you disabled the Safari Cache would the refresh function work correctly? As a test you can disable the Safari Cache by Emptying the Cache first via the Safari menu, then Quit Safari. Now go to the Finder>Your User Library>Caches>Safari. Single click on the Safari folder, then Apple Key + I to open Info panel. There, check the "locked" box. This prevents further additions to the cache. The downside, you lose your ability to upload images etc. within Safari (my cache is disabled, so I use Firefox for the uploads).
Then restart Safari. Try the PDF from within Safari.
Post back

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

When using FireFox I often cannot view pictures in Hotmail, but have no problem when using other browsers

When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers

Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
*Select: [X] "Always use private browsing mode"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. 
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

Performance problem when using CAPS LOCK piano input

Similar Messages

Maybe you are looking for