Performance Problem with Query load

Hello,
after the upgrade to SPS 23, we have some problems with loading a Query. Before the Upgrade, the Query runs 1-3 minutes, and now more then 40 minutes.
Does anyone have an idea?
Regards
Marco

Hi,
Suggest executing the Query in RSRT transaction by choosing the option ' Execute+Debugger' to further analyze where exactly the query is taking time.
Make sure choosing the appropriate 'Query Display' (List/BEx Analyzer/ HTML) option before Executing the query in the Debugger mode since the display option also effect the query run time.
Hope this info helps!
Bala Koppuravuri

Similar Messages

Performance problem with query on bkpf table

hi good morning all ,
i ahave a performance problem with a below query on bkpf table .
SELECT bukrs
           belnr
           gjahr
      FROM bkpf
      INTO TABLE ist_bkpf_temp
     WHERE budat IN s_budat.
is ther any possibility to improve the performanece by using index .
plz help me ,
thanks in advance ,
regards ,
srinivas

hi,
if u can add bukrs as input field or if u have bukrs as part of any other internal table to filter out the data u can use:
for ex:
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
WHERE budat IN s_budat
    and    bukrs in s_bukrs.
or
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
for all entries in itab
WHERE budat IN s_budat
    and bukrs = itab-bukrs.
Just see , if it is possible to do any one of the above?? It has to be verified with ur requirement.

Performance problem with query

Hi,
I have a query.
SELECT
CDW_DIM_DATUM_VW.DATUM
,sum(CDW_FT031_DISCO_VW.RATE_CHARGEABLE_DURATION/60)
FROM
CDW_FT031_DISCO_VW,
CDW_DIM_DATUM_VW
WHERE CDW_DIM_DATUM_VW.DATUM >= to_date('20110901','yyyymmdd')
AND CDW_DIM_DATUM_VW.DATUM < to_date('20110911','yyyymmdd')
AND CDW_DIM_DATUM_VW.DATUM_KEY=CDW_FT031_DISCO_VW.DATUM_KEY
GROUP BY
CDW_DIM_DATUM_VW.DATUM
This query takes 2hrs on production normally which has to take 2 mts.
On checking Explain plan i understood that it is doing full table scan on cdw_ft031 which is the table used in view(cdw_ft031_disco_vw) which has got 30 lakh records.
I analyzed tables and indexes. I rebuilt all indexes . I used hints also but even then it is doing full table scan.
There are indexes created on columns refered in where clause.
Kindly help me.

As the source are VIEWS your code is even not showing the full code. (Beside not showing the tables, indexes etc)
which has got 30 lakh recordsfrom wikipedia:
lakh is a unit in the Indian numbering system equal to one hundred thousandSo if you what that we do understand what your problem is, give us as much information as you have in a language the world understands.
I guess "CDW_DIM_DATUM_VW" is a "time dimension" so it has 1 row per date? Why is it a view?
Then the only join is to CDW_FT031_DISCO_VW where "FT" stands for "Fact"? (Why is it a views?)
What you want is that it picks the index (which it has on DATUM_KEY??) instead of a full table scan?
Is cdw_ft031 parititioned? (You often partition a fact via date, and you see "full table scan" which stand for "full partition scan".
So your fact has 3 Million rows? And the query takes 2 hours? My laptop would do that in less without any index.... there is sometime completely wrong.
I discourage the join of views, but based on what you gave us, hard to give advices.

Performance problem with sdn_nn - new 10g install

I am having a performance problem with sdn_nn after migrating to a new machine. The old Oracle version was 9.0.1.4. The new is 10g. The new machine is faster in general. Most (non-spatial) batch processes run in half the time. However, the below statement is radically slower. The below statement ran in 45 minutes before. On the new machine it hasn't finished after 10 hours. I am able to get a 5% sample of the customers to finish in 45 minutes.
Does anyone have any ideas on how to approach this problem? Any chance something isn't installed correctly on the new machine (the nth version of the query finishe, albeit 20 times slower)?
Appreciate any help. Thanks.
- Jack
create table nearest_store
as
select /*+ ordered */
a.customer_id,
b.store_id nearest_store,
round(mdsys.sdo_nn_distance(1),4) distance
from customers a,
stores b
where mdsys.sdo_nn(
b.geometry,
a.geometry,
'sdo_num_res=1, unit=mile',
1
) = 'TRUE'
;

Dan,
customers 110,000 (involved in this query)
stores 28,000
Here is the execution plan on the current machine:
CREATE TABLE STATEMENT cost = 81947
LOAD AS SELECT
PX COORDINATOR
PX SEND QC (RANDOM) :TQ10000
ROW NESTED LOOPS
1 1 PX BLOCK ITERATOR
1 1ROW TABLE ACCESS FULL CUSTOMERS
1 3 PARTITION RANGE ALL
1 3 TABLE ACCESS BY LOCAL INDEX ROWID STORES
DOMAIN INDEX STORES_SIDX
I can't capture the execution plan on the old database. It is gone. I don't remember it being any different from the above (full scan customers, probe stores index once for each row in customers).
I am trying the query without the create table (just doing a count). I'll let you know on that one.
I am at 10.0.1.3.
Here is how I created the index:
create index stores_sidx
on stores(geometry)
indextype is mdsys.spatial_index LOCAL
Note that the stores table is partitioned by range on store type. There are three store types (each in its own partition). The query returns the nearest store of each type (three rows per customer). This is by design (based on the documented behavior of sdo_nn).
In addition to running the query without the CTAS, I am also going try running it on a different machine tonight. I let you know how that turns out.
The reason I ask about the install, is that the Database Quick Installation Guide for Solaris says this:
"If you intend to use Oracle JVM or Oracle interMedia, you must install the Oracle Database 10g Products installation type from the Companion CD. This installation optimizes the performance of those products on your system."
And, the Database Installlation Guide says:
"If you plan to use Oracle JVM or Oracle interMedia, Oracle strongly recommends that you install the natively compiled Java libraries (NCOMPs) used by those products from the Oracle Database 10g Companion CD. These libraries are required to improve the performance of the products on your platform."
Based on that, I am suspicious that maybe I have the product installed on the new machine, but not correctly (forgot to set fast=true).
Let me know if you think of anything else you'd like to see. Thanks.
- Jack

Performance Problems with "For all Entries" and a big internal table

We have big Performance Problems with following Statement:
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
FOR ALL ENTRIES IN gt_zmon_help
    WHERE
    status = 'IAI200' AND
    logdat IN gs_dat AND
    ztrack = gt_zmon_help-ztrack.
In the internal table gt_zmon_help are over 1000000 entries.
Anyone an Idea how to improve the Performance?
Thank you!

>
Matthias Weisensel wrote:
> We have big Performance Problems with following Statement:
>
>
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
>   FOR ALL ENTRIES IN gt_zmon_help
>     WHERE
>     status = 'IAI200' AND
>     logdat IN gs_dat AND
>     ztrack = gt_zmon_help-ztrack.
>
> In the internal table gt_zmon_help are over 1000000 entries.
> Anyone an Idea how to improve the Performance?
>
> Thank you!
You can't expect miracles. With over a million entries in your itab any select is going to take a bit of time. Do you really need all these records in the itab? How many records is the select bringing back? I'm assuming that you have got and are using indexes on your ZEEDMT_ZMON table.
In this situation, I'd first of all try to think of another way of running the query and restricting the amount of data, but if this were not possible I'd just run it in the background and accept that it is going to take a long time.

Performance problem with ojdbc14.jar

Hi,
We are having performance problem with ojdbc14.jar in selecting and updating (batch updates) entries in a table. The queries are taking minutes to execute. The same java code works fine with classes12.zip ans queries taking sub seconds to execute.
We have Oracle 9.2.0.5 Database Server and I have downloaded the ojdbc14.jar from Oracle site for the same. Tried executing the java code from windows 2000, Sun Solaris and Opteron machines and having the same problem.
Does any one know a solution to this problem? I also tried ojdbc14.jar meant for Oracle 10g, that did not help.
Please help.
Thanks
Yuva

My code is doing some thing which might be working well with classes12.zip and which does not work well with ojdbc14.jar? Any general suggestions to make the code better, especially for batch updates.
But for selecting a row from the table, I am using index columns in the where cluase. In the code using PreparedStatement, setting all the reuired fields. Here is the code. We have a huge index with 14 fields!!. All the parameters are for where clause.
if(longCallPStmt == null) {
longCallPStmt = conn.prepareStatement(longCallQuery);
log(Level.FINE, "CdrAggLoader: Loading tcdragg entry for "
+GeneralUtility.formatDate(cdrAgg.time_hour, "MM/dd/yy HH"));
longCallPStmt.clearParameters();
longCallPStmt.setInt(1, cdrAgg.iintrunkgroupid);
longCallPStmt.setInt(2, cdrAgg.iouttrunkgroupid);
longCallPStmt.setInt(3, cdrAgg.iintrunkgroupnumber);
longCallPStmt.setInt(4, cdrAgg.iouttrunkgroupnumber);
longCallPStmt.setInt(5, cdrAgg.istateregionid);
longCallPStmt.setTimestamp(6, cdrAgg.time_hour);
longCallPStmt.setInt(7, cdrAgg.icalltreatmentcode);
longCallPStmt.setInt(8, cdrAgg.icompletioncode);
longCallPStmt.setInt(9, cdrAgg.bcallcompleted);
longCallPStmt.setInt(10, cdrAgg.itodid);
longCallPStmt.setInt(11, cdrAgg.iasktodid);
longCallPStmt.setInt(12, cdrAgg.ibidtodid);
longCallPStmt.setInt(13, cdrAgg.iaskzoneid);
longCallPStmt.setInt(14, cdrAgg.ibidzoneid);
rs = longCallPStmt.executeQuery();
if(rs.next()) {
cdr_agg = new CdrAgg(
rs.getInt(1),
rs.getInt(2),
rs.getInt(3),
rs.getInt(4),
rs.getInt(5),
rs.getTimestamp(6),
rs.getInt(7),
rs.getInt(8),
rs.getInt(9),
rs.getInt(10),
rs.getInt(11),
rs.getInt(12),
rs.getInt(13),
rs.getInt(14),
rs.getInt(15),
rs.getInt(16)
}//if
end_time = System.currentTimeMillis();
log(Level.INFO, "CdrAggLoader: Loaded "+((cdr_agg==null)?0:1) + " "
+ GeneralUtility.formatDate(cdrAgg.time_hour, "MM/dd/yy HH")
+" tcdragg entry in "+(end_time - start_time)+" msecs");
} finally {
GeneralUtility.closeResultSet(rs);
GeneralUtility.closeStatement(pstmt);
Why that code works well for classes12.zip (comes back in around 10 msec) and not for ojdbc14.jar (comes back in 6-7 minutes)?
Please advise.

Performance problem with table COSS...

Hi
Anyone encountered performance problem with these table : COSS, COSB, COEP
Best Regards

>
gsana sana wrote:
> Hi Guru's
>
> this is the select Query which is taking much time in Production. so please help me to improve the preformance with BSEG.
>
> this is my select query:
>
> select bukrs
>               belnr
>               gjahr
>               bschl
>               koart
>               umskz
>               shkzg
>               dmbtr
>               ktosl
>               zuonr
>               sgtxt
>               kunnr
>         from bseg
>         into table gt_bseg1
>          for all entries in gt_bkpf
>        where bukrs eq p_bukrs
>          and belnr eq gt_bkpf-belnr
>          and gjahr eq p_gjahr
>          and buzei in gr_buzei
>          and bschl eq '40'
>          and ktosl ne 'BSP'.
>
> UR's
> GSANA
Hi,
This is what I know and please if any expert think its incorrect, please do correct me.
BSEG is a cluster table with BUKRS, BELNR, GJAHR and BUZEI as the key whereas other key will be stored in database as raw data thus SAP apps will need to convert that raw data first if we are using other keys in where condition. Hence, I suggest to use up to buzei in the where condition and filter other condition in internal table level like using Delete statement. Hope its help.
Regards,
Abraham

Performance problem with CR SDK

Hi,
I'am currently on a customer site and I have the following problem :
The client have a performance problem with a J2EE application wich call a Crystal report with th CR SDK. To reproduce the problem on the local machine (the CR server), I have developped a little jsp page wich used the Crystal SDK to open a Crystal report on the server (this report is based on a XML data source), setting the new data source (with a new xml data flow) and refresh the report in PDF format.
The problem is that the 2 first sequences take about 5 seconde each (5 sec for the opening report and 5 seconds for the setting data source). Then the total process take about 15 seconds to open and refresh the document that is very long for a little document.
The document is a 600Ko file, the xml source is a 80Ko file.
My jsp page is directly deployed on the tomcat of the Crystal Report Server (CRXIR2 without Service Pack).
The Filestore and the MySQL database are on the CR server.
The server is a 4 quadripro (16 proc) with 16Go of RAM and is totally dedicated to Crystal Report. For the moment, there is no activity on the server (it is also used for the test).
The mains jsp orders are the followings :
IEnterpriseSession es = CrystalEnterprise.getSessionMgr().logon("administrator", "", "EDITBI:6400", "secEnterprise");
    IInfoStore infoStore = (IInfoStore) es.getService("", "InfoStore");
    IInfoObjects infoObjects = infoStore.query("SELECT * FROM CI_INFOOBJECTS WHERE SI_NAME='CPA_EV' AND SI_INSTANCE=0 ");
    IInfoObject report = (IInfoObject) infoObjects.get(0);
IReportAppFactory reportAppFactory = (IReportAppFactory)es.getService("RASReportFactory");
ReportClientDocument reportClientDoc = reportAppFactory.openDocument(report.getID(), 0, null);
IXMLDataSet xmlDataSet = new XMLDataSet();
xmlDataSet.setXMLData(new ByteArray(ligne_data_xml));
xmlDataSet.setXMLSchema(new ByteArray(ligne_schema_xml));
DatabaseController db = reportClientDoc.getDatabaseController();
db.setDataSource(xmlDataSet, "", "");
ByteArrayInputStream bt = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
My question is : does this method is the good one to do this ?
Thank's in advance for your help
Best regards
Emmanuel

Hi,
My problem is not resolved and I have'nt news from the support.
If you have any idea/info, don't forget me
Thank's in advance
Emmanuel

Performance problem with Integration with COGNOS and Bex

Hi Gems
I have a performance problem with some of my queries when integrating with the COGNOS
My query is simple which gets the data for the date interval : "
From Date: 20070101
To date:20070829
When executing the query in the Bex it takes 2mins but when it is executed in the COGNOS it takes almost 10mins and above..
Any where can we debug the report how the data is sending to the cognos. Like debugging the OLEDB ..
and how to increase the performance.. of the query in the Cognos ..
Thanks in Advance
Regards
AK

Hi,
Please check the following CA Unicenter config files on the SunMC server:
- is the Event Adapter (ea-start) running ?, without these daemon no event forwarding is done the CA Unicenter nor discover from Ca unicenter is working.
How to debug:
- run ea-start in debug mode:
# /opt/SUNWsymon/SunMC-TNG/sbin/ea-start -d9
- check if the Event Adaptor is been setup,
# /var/opt/SUNWsymon/SunMC-TNG/cfg_sunmctotng
- check the CA log file
# /var/opt/SUNWsymon/SunMC-TNG/SunMCToTngAdaptorMain.log
After that is all fine check this side it explains how to discover an SunMC agent from CA Unicenter.
http://docs.sun.com/app/docs/doc/817-1101/6mgrtmkao?a=view#tngtrouble-6
Kind Regards

Critical performance problem upon bulk load of groups

All (including product development),
I think there are missing indexes in wwsec_flat$ and wwsec_sys_priv$. Anyway, I'd like assistance on fixing the critical performance problems I see, properly. Read on...
During and after bulk load of a few (about 500) users and groups from an external database, it becomes evident that there's a performance problem somewhere. Many of the calls to wwsec_api.addGroupToList took several minutes to finish. Afterwards the machine went 100% CPU just from logging in with the portal30 user (which happens to be group owner for all the groups).
Running SQL trace points in the directions of the following SQL statement:
SELECT ID,PARENT_ID,NAME,TITLE_ID,TITLEIMAGE_ID,ROLLOVERIMAGE_ID,
DESCRIPTION_ID,LAYOUT_ID,STYLE_ID,PAGE_TYPE,CREATED_BY,CREATED_ON,
LAST_MODIFIED_BY,LAST_MODIFIED_ON,PUBLISHED_ON,HAS_BANNER,HAS_FOOTER,
EXPOSURE,SHOW_CHILDREN,IS_PUBLIC,INHERIT_PRIV,IS_READY,EXECUTE_MODE,
CACHE_MODE,CACHE_EXPIRES,TEMPLATE FROM
WWPOB_PAGE$ WHERE ID = :b1
I checked the existing indexes, and see that the following ones are missing (I'm about to test with these, but have not yet done so):
CREATE UNIQUE INDEX "PORTAL30"."WWSEC_FLAT_IX_GROUP_ID"
ON "PORTAL30"."WWSEC_FLAT$"("GROUP_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 160K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING
CREATE UNIQUE INDEX "PORTAL30"."WWSEC_FLAT_IX_PERSON_ID"
ON "PORTAL30"."WWSEC_FLAT$"("PERSON_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 160K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING
CREATE UNIQUE INDEX "PORTAL30"."WWSEC_SYS_PRIV_IX_PATCH1"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("OWNER", "GRANTEE_GROUP_ID",
"GRANTEE_TYPE", "OWNER", "NAME", "OBJECT_TYPE_NAME")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 80K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING
Note that when I deleted the newly inserted groups, the CPU consumption immediately went down from 100% to some 2-3%.
This behaviour has been observed on a Sun Solaris system, but I think it's the same on NT (I have observed it during the bulk load on my NT laptop, but so far have not had the time to test further.).
Also note: In the call to addGroupToList, I set owner to true for all groups.
Also note: During loading of the groups, I logged a few errors, all of the same type ("PORTAL30.WWSEC_API", line 2075), as follows:
Error: Problem calling addGroupToList for child group'Marketing' (8030), list 'NO_OSL_Usenet'(8017). Reason: java.sql.SQLException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "PORTAL30.WWSEC_API", line 2075
Please help. If you like, I may supply the tables and the java program that I use. It's fully reproducable.
Thanks,
Erik Hagen (you may call me on +47 90631013)
null

YES!
I have now tested with insertion of the missing indexes. It seems the call to addGroupToList takes just as long time as before, but the result is much better: WITH THE INDEXES DEFINED, THERE IS NO LONGER A PERFORMANCE PROBLEM!! The index definitions that I used are listed below (I added these to the ones that are there in Portal 3.0.8, but I guess some of those could have been deleted).
About the info at http://technet.oracle.com:89/ubb/Forum70/HTML/000894.html: Yes! Thanks! Very interesting, and I guess you found the cause for the error messages and maybe also for the performance problem during bulk load (I'll look into it as soon as possible anbd report what I find.).
Note: I have made a pretty foolproof and automated installation script (or actually, it's part of my Java program), that will let anybody interested recreate the problem. Mail your interest to [email protected].
============================================
CREATE INDEX "PORTAL30"."LDAP_WWSEC_PERS_IX1"
ON "PORTAL30"."WWSEC_PERSON$"("MANAGER")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 32K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX PORTAL30.LDAP_WWSEC_PERS_IX2
ON PORTAL30.WWSEC_PERSON$('ORGANIZATION')
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 32K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX PORTAL30.LDAP_WWSEC_PERS_PK
ON PORTAL30.WWSEC_PERSON$('ID')
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 32K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX PORTAL30.LDAP_WWSEC_PERS_UK
ON PORTAL30.WWSEC_PERSON$('USER_NAME')
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 32K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_UK
ON PORTAL30.WWSEC_FLAT$("GROUP_ID", "PERSON_ID",
"SPONSORING_MEMBER_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_PK
ON PORTAL30.WWSEC_FLAT$("ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_IX5
ON PORTAL30.WWSEC_FLAT$("GROUP_ID", "PERSON_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_IX4
ON PORTAL30.WWSEC_FLAT$("SPONSORING_MEMBER_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_IX3
ON PORTAL30.WWSEC_FLAT$("GROUP_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_IX2
ON PORTAL30.WWSEC_FLAT$("PERSON_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_IX1"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("GRANTEE_GROUP_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 56K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_IX2"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("GRANTEE_USER_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 56K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_IX3"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("OBJECT_TYPE_NAME", "NAME")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 56K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_PK"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 56K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_UK"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("OBJECT_TYPE_NAME",
"NAME", "OWNER", "GRANTEE_TYPE", "GRANTEE_GROUP_ID",
"GRANTEE_USER_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 88K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
==================================
Thanks,
Erik Hagen
null

Performance problems with jdk 1.5 on Linux plattform

Performance problems with jdk 1.5 on Linux plattform
(not tested on Windows, might be the same)
After refactoring using the new features from java 1.5 I lost
performance significantly:
public Vector<unit> units;
The new code:
for (unit u: units) u.accumulate();
runs more than 30% slower than the old code:
for (int i = 0; i < units.size(); i++) units.elementAt(i).accumulate();
I expected the opposite.
Is there any information available that helps?

Here's the complete benchmark code I used:package test;
import java.text.NumberFormat;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.Vector;
public class IterationPerformanceTest {
     private int m_size;
     public IterationPerformanceTest(int size) {
          m_size = size;
     public long getArrayForLoopDuration() {
          Integer[] testArray = new Integer[m_size];
          for (int item = 0; item < m_size; item++) {
               testArray[item] = new Integer(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (int index = 0; index < m_size; index++) {
               builder.append(testArray[index]);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getArrayForEachDuration() {
          Integer[] testArray = new Integer[m_size];
          for (int item = 0; item < m_size; item++) {
               testArray[item] = new Integer(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (Integer item : testArray) {
               builder.append(item);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getArrayListForLoopDuration() {
          ArrayList<Integer> testList = new ArrayList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (int index = 0; index < m_size; index++) {
               builder.append(testList.get(index));
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getArrayListForEachDuration() {
          ArrayList<Integer> testList = new ArrayList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (Integer item : testList) {
               builder.append(item);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getArrayListIteratorDuration() {
          ArrayList<Integer> testList = new ArrayList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          Iterator<Integer> iterator = testList.iterator();
          while(iterator.hasNext()) {
               builder.append(iterator.next());
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getLinkedListForLoopDuration() {
          LinkedList<Integer> testList = new LinkedList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (int index = 0; index < m_size; index++) {
               builder.append(testList.get(index));
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getLinkedListForEachDuration() {
          LinkedList<Integer> testList = new LinkedList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (Integer item : testList) {
               builder.append(item);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getLinkedListIteratorDuration() {
          LinkedList<Integer> testList = new LinkedList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          Iterator<Integer> iterator = testList.iterator();
          while(iterator.hasNext()) {
               builder.append(iterator.next());
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getVectorForLoopDuration() {
          Vector<Integer> testVector = new Vector<Integer>();
          for (int item = 0; item < m_size; item++) {
               testVector.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (int index = 0; index < m_size; index++) {
               builder.append(testVector.get(index));
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getVectorForEachDuration() {
          Vector<Integer> testVector = new Vector<Integer>();
          for (int item = 0; item < m_size; item++) {
               testVector.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (Integer item : testVector) {
               builder.append(item);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getVectorIteratorDuration() {
          Vector<Integer> testVector = new Vector<Integer>();
          for (int item = 0; item < m_size; item++) {
               testVector.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          Iterator<Integer> iterator = testVector.iterator();
          while(iterator.hasNext()) {
               builder.append(iterator.next());
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
      * @param args
     public static void main(String[] args) {
          IterationPerformanceTest test = new IterationPerformanceTest(1000000);
          System.out.println("\n\nRESULTS:");
          long arrayForLoop = test.getArrayForLoopDuration();
          long arrayForEach = test.getArrayForEachDuration();
          long arrayListForLoop = test.getArrayListForLoopDuration();
          long arrayListForEach = test.getArrayListForEachDuration();
          long arrayListIterator = test.getArrayListIteratorDuration();
//          long linkedListForLoop = test.getLinkedListForLoopDuration();
          long linkedListForEach = test.getLinkedListForEachDuration();
          long linkedListIterator = test.getLinkedListIteratorDuration();
          long vectorForLoop = test.getVectorForLoopDuration();
          long vectorForEach = test.getVectorForEachDuration();
          long vectorIterator = test.getVectorIteratorDuration();
          System.out.println("Array      for-loop: " + getPercentage(arrayForLoop, arrayForLoop) + "% ("+getDuration(arrayForLoop)+" sec)");
          System.out.println("Array      for-each: " + getPercentage(arrayForLoop, arrayForEach) + "% ("+getDuration(arrayForEach)+" sec)");
          System.out.println("ArrayList for-loop: " + getPercentage(arrayForLoop, arrayListForLoop) + "% ("+getDuration(arrayListForLoop)+" sec)");
          System.out.println("ArrayList for-each: " + getPercentage(arrayForLoop, arrayListForEach) + "% ("+getDuration(arrayListForEach)+" sec)");
          System.out.println("ArrayList iterator: " + getPercentage(arrayForLoop, arrayListIterator) + "% ("+getDuration(arrayListIterator)+" sec)");
//          System.out.println("LinkedList for-loop: " + getPercentage(arrayForLoop, linkedListForLoop) + "% ("+getDuration(linkedListForLoop)+" sec)");
          System.out.println("LinkedList for-each: " + getPercentage(arrayForLoop, linkedListForEach) + "% ("+getDuration(linkedListForEach)+" sec)");
          System.out.println("LinkedList iterator: " + getPercentage(arrayForLoop, linkedListIterator) + "% ("+getDuration(linkedListIterator)+" sec)");
          System.out.println("Vector     for-loop: " + getPercentage(arrayForLoop, vectorForLoop) + "% ("+getDuration(vectorForLoop)+" sec)");
          System.out.println("Vector     for-each: " + getPercentage(arrayForLoop, vectorForEach) + "% ("+getDuration(vectorForEach)+" sec)");
          System.out.println("Vector     iterator: " + getPercentage(arrayForLoop, vectorIterator) + "% ("+getDuration(vectorIterator)+" sec)");
     private static NumberFormat percentageFormat = NumberFormat.getInstance();
     static {
          percentageFormat.setMinimumIntegerDigits(3);
          percentageFormat.setMaximumIntegerDigits(3);
          percentageFormat.setMinimumFractionDigits(2);
          percentageFormat.setMaximumFractionDigits(2);
     private static String getPercentage(long base, long value) {
          double result = (double) value / (double) base;
          return percentageFormat.format(result * 100.0);
     private static NumberFormat durationFormat = NumberFormat.getInstance();
     static {
          durationFormat.setMinimumIntegerDigits(1);
          durationFormat.setMaximumIntegerDigits(1);
          durationFormat.setMinimumFractionDigits(4);
          durationFormat.setMaximumFractionDigits(4);
     private static String getDuration(long nanos) {
          double result = (double)nanos / (double)1000000000;
          return durationFormat.format(result);
}

Performance problems with new Java Tiger style recommendations

Performance problems with jdk 1.5 on Linux plattform
(not tested on Windows, might be the same)
using the new style recommendations.
I need fast Vector loops for high speed mathematical calculations, some
hints about the fastest way to program that loop would be also great!
After refactoring using the new features from java 1.5 (as recommended from
SUN) I lost performance significantly:
using a vector:
public Vector<unit> units;
The new code (recommended from SUN for Java Tiger for redesign):
for (unit u: units) u.accumulate();
runs more than 30% slower than the old code:
for (int i = 0; i < units.size(); i++) units.elementAt(i).accumulate();
I expected the opposite.
Is there any information available that helps?
The following additional information I got from Mr. Shankar Unni:
I got some fairly anomalous results comparing ArrayList and Vector: for the
1.5-style loops, ArrayList was faster then Vector, but for a loop with get()
calls, Vector was faster. Vector was even faster than that using
elementAt(), which was a surprise:
For a million summing iterations over a 100-element array:
vector elementAt loop took 3446 ms.
vector get loop took 3796 ms.
vector iterator loop took 5469 ms.
arraylist get loop took 4136 ms.
arraylist iterator loop took 4668 ms.

If your topic doesn't change, please stay in your original post.

Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

Hi everybody,
we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
Does anybody detect the same problems?
Best regards,
Ulli

Most important question when you are talking about performance-issues:
which OC are you working on and which excel version?
ciao
Joke

Performance problems with EP 6 and MS IE

Hi everybody,
since a couple of days, we are facing a sever performance problem with our SAP EP 6.0. When I access the system with MS Internet Explorer 6.0, it takes 5-10 minutes after the Login. With Firefox Browser, the performance is ok. Therefore I assume that it must be a problem with the IE settings. Does anybody know a solution?
Best regards,
Michael

There are a few things that this could be. I've seen the setting "Empty Temporary Internet Files folder when browser is closed" cause a lot of performance problems (This is in the advanced settings in your IE).
This will cause your cache to be cleared out each time the browser is closed and cause a lot more data to be downloaded each time you login to the system.
For more analysis I'd recommend putting a tool like HTTPWatch into your IE browser and seeing which requests are using the most time.

View with columns based on function - problem with query

Hi,
I'm using Oracle 9i;
I've created a view which has columns based on a table columns (multiple columns from 1 table) and funtion (multiple columns based on 1 function).
The function takes ID as the first argument and name of the column to determine which value to return as the second one.
Here is a sample of such function (simplified):
FUNCTION my_function
(in_id IN NUMBER, in_col_name IN VARCHAR2)
RETURN VARCHAR2
IS
c_name VARCHAR2(100);
c_last_name VARCHAR2(100);
BEGIN
SELECT T.NAME, T.LAST_NAME
INTO c_name, c_last_name
FROM TABLE_1 T, TABLE_2 Z
WHERE T.PK = Z.FK
AND Z.ID = in_id;
IF in_col_name = 'NAME' THEN
RETURN c_name;
ELSIF in_col_name = 'LAST_NAME' THEN
RETURN c_last_name;
END IF;
END;
For simplicty I've restricted the number of columns.
CREATE OR REPLACE VIEW my_view
(ID, NAME, LAST_NAME)
AS
SELECT
T.ID ID
,CAST(my_function(T.ID,'NAME') AS VARCHAR2(100)) NAME
,CAST(my_function(T.ID,'LAST_NAME') AS VARCHAR2(100)) LAST_NAME
FROM TABLE T;
There is no problem with query:
SELECT * FROM my_view;
The problem arises when I query the view (regardles of '=' or 'LIKE'):
SELECT * FROM my_view
WHERE name LIKE '%some_part_of_name%'
The query returns rows for same names, for same it doesn't. If I put '=' and the whole name the query returns nothing, but when I put 'LIKE' and the first letter it returns rows in some cases.
I've tried to debug this situation and I've discovered that the function recives ID not in the proper order and not the same amount of times - in explicit:
for each ID in (1, 2, 3, 4, 5, 6, ... , 100) the function should be called twice for each ID and in the same order, but it does not.
I get 1, 1, 2, 3, 3, 6, 20, 20 and so on.
Help needed.
Greetings.

The problem is more complicated than the solutions provided here.
The reason why I'm using the function is this:
the original view was constructed using multiple union all selects and the speed was terrible. I've created the index on the base table to obtain a proper sort. For retriving all records at once the view works perfectly, but if one wants to query by columns based on function the results are suprisng - sometimes there are, some times there are none, or if you serch with "like" and only a part of string there are results, but with "=" there are no results.
Here are real DDLs:
View:
CREATE OR REPLACE VIEW V_DOK_ARCH
(ID_ZDAR, TYP, STAN, DATE_CREATED, CREATED_BY,
DATE_MODIFIED, MODIFIED_BY, SPRA_ID_SPRA, PODM_ID_PODM, PODM_UMOW_ID_UMOW,
NR_WFS, WFS_NR_INTER, UWAGI_OPER, FUNDUSZ, NUMER,
DATA_PODPISANIA, RODZAJ, TYP_PRZY, TYP_UBEZ, NAZWISKO,
IMIE, IMIE_OJCA, NAZWA_FIRMY, NAZWA_FIRMY_SKR, DANE_KLIE)
AS
SELECT /*+ INDEX(Z ZDAR_DATE_CREATED_DESC_I) */
Z.ID_ZDAR ID_ZDAR
, Z.TYP TYP
, Z.STAN STAN
, Z.DATE_CREATED DATE_CREATED
, Z.CREATED_BY CREATED_BY
, Z.DATE_MODIFIED DATE_MODIFIED
, Z.MODIFIED_BY MODIFIED_BY
, Z.SPRA_ID_SPRA SPRA_ID_SPRA
, Z.PODM_ID_PODM PODM_ID_PODM
, Z.PODM_UMOW_ID_UMOW PODM_UMOW_ID_UMOW
, Z.NR_WFS NR_WFS
, Z.WFS_NR_INTER WFS_NR_INTER
, Z.UWAGI_OPER UWAGI_OPER
, Z.FUNDUSZ FUNDUSZ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NUMER') AS VARCHAR2(30)) NUMER
, F_Rej_Zdar_Date(Z.ID_ZDAR, 'DATA_PODPISANIA') DATA_PODPISANIA
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'RODZAJ') AS VARCHAR2(4)) RODZAJ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_PRZY') AS VARCHAR2(4)) TYP_PRZY
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_UBEZ') AS VARCHAR2(3)) TYP_UBEZ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO') AS VARCHAR2(30)) NAZWISKO
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE') AS VARCHAR2(30)) IMIE
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA') AS VARCHAR2(30)) IMIE_OJCA
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY') AS VARCHAR2(300)) NAZWA_FIRMY
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR') AS VARCHAR2(100)) NAZWA_FIRMY_SKR
, CAST(LTRIM(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA')||F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY')||DECODE(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY'),NULL,F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR'),NULL)) AS VARCHAR2(492)) DANE_KLIE
FROM T_ZDARZENIA Z
WHERE F_Rej_Zdar_Char(Z.ID_ZDAR, 'JEST') = 'T';
and functions:
CREATE OR REPLACE FUNCTION F_Rej_Zdar_Char
(WE_ID_ZDAR IN NUMBER
,WE_KOLUMNA IN VARCHAR2
RETURN VARCHAR2
IS
c_numer           T_PRZYSTAPIENIA.NUMER%TYPE;--VARCHAR2(30);
c_rodzaj           T_KLIENCI.RODZAJ%TYPE;--VARCHAR2(1);
c_typ_przy           T_PRZYSTAPIENIA.TYP_PRZY%TYPE;--VARCHAR2(1);
c_typ_ubez           T_PRZYSTAPIENIA.TYP_UBEZ%TYPE;--VARCHAR2(3);
c_nazwisko           T_KLIENCI.NAZWISKO%TYPE;--VARCHAR2(30);
c_imie                T_KLIENCI.IMIE%TYPE;--VARCHAR2(30);
c_imie_ojca      T_KLIENCI.IMIE_OJCA%TYPE;--VARCHAR2(30);
c_nazwa_firmy      T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(300);
c_nazwa_firmy_skr T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(100);
c_jest                VARCHAR2(1) := 'T';
c EXCEPTION;
BEGIN
--dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR);
BEGIN
SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
WHERE p.KLIE_ID_KLIE = k.ID_KLIE
AND z.PODM_ID_PODM = D1.ID_PODM
AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
AND D2.PRZY_ID_PRZY = P.ID_PRZY
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
     BEGIN
     SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
     INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
     FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
     WHERE z.PODM_UMOW_ID_UMOW IS NULL
     AND z.PODM_ID_PODM = D.ID_PODM
     AND D.KLIE_ID_KLIE = k.ID_KLIE
     AND p.KLIE_ID_KLIE = k.ID_KLIE
     AND z.ID_ZDAR = WE_ID_ZDAR;
     EXCEPTION
          WHEN NO_DATA_FOUND THEN
          BEGIN
          SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, I.nazwisko, I.imie, I.imie_ojca, I.NAZWA NAZWA_FIRMY, I.NAZWA_SKR nazwa_firmy_skr
          INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
          FROM T_ZDARZENIA z, T_INSTYTUCJE I
          WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
          AND z.PODM_UMOW_ID_UMOW IS NULL
          AND Z.PODM_ID_PODM = I.ID_INST
          AND z.ID_ZDAR = WE_ID_ZDAR;
          EXCEPTION
               WHEN NO_DATA_FOUND THEN
               BEGIN
               SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
               INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
               FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
               WHERE a.ID_AGAG = p.AGAG_ID_AGAG
               AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
               AND z.ID_ZDAR = WE_ID_ZDAR;
               EXCEPTION
                    WHEN NO_DATA_FOUND THEN
                    BEGIN
                    SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
                    INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                    FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
                    WHERE a.ID_AGAG = p.AGAG_ID_AGAG
                    AND z.PODM_ID_PODM = a.ID_AGAG
                    AND z.PODM_UMOW_ID_UMOW IS NULL
                    AND z.ID_ZDAR = WE_ID_ZDAR;
                    EXCEPTION
                         WHEN NO_DATA_FOUND THEN
                         BEGIN
                         SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
                         INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                         FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
                         WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
                         AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
                         AND z.ID_ZDAR = WE_ID_ZDAR;
                         EXCEPTION
                              WHEN NO_DATA_FOUND THEN
                              BEGIN
                              SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
                              INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                              FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
                              WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
                              AND z.PODM_ID_PODM = a.ID_AGKAN
                              AND z.PODM_UMOW_ID_UMOW IS NULL
                              AND z.ID_ZDAR = WE_ID_ZDAR;
                              EXCEPTION
                                   WHEN NO_DATA_FOUND THEN
                                   BEGIN
                                   SELECT k.NUMER_UMOWY NUMER, DECODE(k.TYP_PRZYSTAPIENIA,'P','F','P') RODZAJ,k.TYP_PRZYSTAPIENIA TYP_PRZY,'NPO' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, k.nazwa_firmy nazwa_firmy, k.nazwa_firmy_skr nazwa_firmy_skr
                                   INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                                   FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
                                   WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
                                   AND k.TYP_PRZYSTAPIENIA IN ('P','W')
                                   AND z.PODM_ID_PODM IS NULL
                                   AND z.PODM_UMOW_ID_UMOW IS NULL
                                   AND z.ID_ZDAR = WE_ID_ZDAR;
                                   EXCEPTION
                                        WHEN NO_DATA_FOUND THEN
                                        BEGIN
                                        SELECT k.NUMER_UMOWY NUMER, 'F' RODZAJ,'-' TYP_PRZY,'OPS' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
                                        INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                                        FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
                                        WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
                                        AND z.PODM_ID_PODM IS NULL
                                        AND z.PODM_UMOW_ID_UMOW IS NULL
                                        AND z.ID_ZDAR = WE_ID_ZDAR;
                                        EXCEPTION
                                             WHEN NO_DATA_FOUND THEN
                                             BEGIN
                                             SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, NULL nazwisko, NULL imie_pierwsze, NULL imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
                                             INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                                             FROM T_ZDARZENIA z
                                             WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
                                             AND z.PODM_ID_PODM IS NULL
                                             AND z.PODM_UMOW_ID_UMOW IS NULL
                                             AND z.ID_ZDAR = WE_ID_ZDAR;
                                             EXCEPTION
                                                  WHEN NO_DATA_FOUND THEN
                                                       --dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR||' ostatni wyjatek');
                                                       NULL;
                                             END;
                                        END;
                                   END;
                              END;
                         END;
                    END;
               END;
          END;
     END;
END;
--raise c;
IF WE_KOLUMNA = 'NUMER' THEN
RETURN c_numer;
ELSIF WE_KOLUMNA = 'RODZAJ' THEN
RETURN c_rodzaj;
ELSIF WE_KOLUMNA = 'TYP_PRZY' THEN
RETURN c_typ_przy;
ELSIF WE_KOLUMNA = 'TYP_UBEZ' THEN
RETURN c_typ_ubez;
ELSIF WE_KOLUMNA = 'NAZWISKO' THEN
RETURN c_nazwisko;
ELSIF WE_KOLUMNA = 'IMIE' THEN
RETURN c_imie;
ELSIF WE_KOLUMNA = 'IMIE_OJCA' THEN
RETURN c_imie_ojca;
ELSIF WE_KOLUMNA = 'NAZWA_FIRMY' THEN
RETURN c_nazwa_firmy;
ELSIF WE_KOLUMNA = 'NAZWA_FIRMY_SKR' THEN
RETURN c_nazwa_firmy_skr;
ELSIF WE_KOLUMNA = 'JEST' THEN
RETURN c_jest;
END IF;
END;
CREATE OR REPLACE FUNCTION F_Rej_Zdar_Date
(WE_ID_ZDAR IN NUMBER
,WE_KOLUMNA IN VARCHAR2
RETURN DATE
IS
d_data DATE;
BEGIN
BEGIN
SELECT p.DATA_PODPISANIA
INTO d_data
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
WHERE p.KLIE_ID_KLIE = k.ID_KLIE
AND z.PODM_ID_PODM = D1.ID_PODM
AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
AND D2.PRZY_ID_PRZY = P.ID_PRZY
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
     BEGIN
     SELECT p.DATA_PODPISANIA
     INTO d_data
     FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
     WHERE z.PODM_UMOW_ID_UMOW IS NULL
     AND z.PODM_ID_PODM = D.ID_PODM
     AND D.KLIE_ID_KLIE = k.ID_KLIE
     AND p.KLIE_ID_KLIE = k.ID_KLIE
     AND z.ID_ZDAR = WE_ID_ZDAR;
     EXCEPTION
          WHEN NO_DATA_FOUND THEN
          BEGIN
          SELECT NULL DATA_PODPISANIA
          INTO d_data
          FROM T_ZDARZENIA z, T_INSTYTUCJE I
          WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
          AND z.PODM_UMOW_ID_UMOW IS NULL
          AND Z.PODM_ID_PODM = I.ID_INST
          AND z.ID_ZDAR = WE_ID_ZDAR;
          EXCEPTION
               WHEN NO_DATA_FOUND THEN
               BEGIN
               SELECT p.DATA_PODPISANIA DATA_PODPISANIA
               INTO d_data
               FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
               WHERE a.ID_AGAG = p.AGAG_ID_AGAG
               AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
               AND z.ID_ZDAR = WE_ID_ZDAR;
               EXCEPTION
                    WHEN NO_DATA_FOUND THEN
                    BEGIN
                    SELECT p.DATA_PODPISANIA DATA_PODPISANIA
                    INTO d_data
                    FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
                    WHERE a.ID_AGAG = p.AGAG_ID_AGAG
                    AND z.PODM_ID_PODM = a.ID_AGAG
                    AND z.PODM_UMOW_ID_UMOW IS NULL
                    AND z.ID_ZDAR = WE_ID_ZDAR;
                    EXCEPTION
                         WHEN NO_DATA_FOUND THEN
                         BEGIN
                         SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
                         INTO d_data
                         FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
                         WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
                         AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
                         AND z.ID_ZDAR = WE_ID_ZDAR;
                         EXCEPTION
                              WHEN NO_DATA_FOUND THEN
                              BEGIN
                              SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
                              INTO d_data
                              FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
                              WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
                              AND z.PODM_ID_PODM = a.ID_AGKAN
                              AND z.PODM_UMOW_ID_UMOW IS NULL
                              AND z.ID_ZDAR = WE_ID_ZDAR;
                              EXCEPTION
                                   WHEN NO_DATA_FOUND THEN
                                   BEGIN
                                   SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
                                   INTO d_data
                                   FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
                                   WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
                                   AND k.TYP_PRZYSTAPIENIA IN ('P','W')
                                   AND z.PODM_ID_PODM IS NULL
                                   AND z.PODM_UMOW_ID_UMOW IS NULL
                                   AND z.ID_ZDAR = WE_ID_ZDAR;
                                   EXCEPTION
                                        WHEN NO_DATA_FOUND THEN
                                        BEGIN
                                        SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
                                        INTO d_data
                                        FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
                                        WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
                                        AND z.PODM_ID_PODM IS NULL
                                        AND z.PODM_UMOW_ID_UMOW IS NULL
                                        AND z.ID_ZDAR = WE_ID_ZDAR;
                                        EXCEPTION
                                             WHEN NO_DATA_FOUND THEN
                                             BEGIN
                                             SELECT NULL DATA_PODPISANIA
                                             INTO d_data
                                             FROM T_ZDARZENIA z
                                             WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
                                             AND z.PODM_ID_PODM IS NULL
                                             AND z.PODM_UMOW_ID_UMOW IS NULL
                                             AND z.ID_ZDAR = WE_ID_ZDAR;
                                             EXCEPTION
                                                  WHEN NO_DATA_FOUND THEN
                                                       d_data := NULL;
                                             END;
                                        END;
                                   END;
                              END;
                         END;
                    END;
               END;
          END;
     END;
END;
IF WE_KOLUMNA = 'DATA_PODPISANIA' THEN
RETURN d_data;
END IF;
END;

Performance Problem with Query load

Similar Messages

Maybe you are looking for