Performance problem with recordset object

Hi,
I have a performance problem with record set object. Is it true using RecordSet object as argument to the method will cause any perfomance degradation?
here is my code.
finStmtList = selectFinancialStatements(rs, shortFormat, latestOnly, true);
I changed the code by populating the recordset in the method that called the above statement. previously the population of valueobject is within the select FinancialStatements.
Now the method looks like
finStmtList = selectFinancialStatements(ValueObject, shortFormat, latestOnly, true);
Is this fix will result in any performance gain?

Can any one suggest me that the above RecordSet Object contains large number of records that counts up to 1000 rows and having 30 columns? I tested the application. But the performance varies from time to time.
Is there any other way to fine tune it?

Similar Messages

  • Performance issue with Business Objects Java JRC API in CRXI R2 version

    A report is developed using java JRC API in CR XI release 2. When I generate the report in the designer, it took less than 5 seconds to display the results in crystal report viewer inside the designer. But in the QA environment, when I generate the same report from the application, it takes almost 1 to 1.5 minutes to display the same results in PDF. I also noticed that if the dataset contains bigger volume of data, then the reports are taking even longer almost 15 to 20 minutes.
    While generating the report from the application, I noticed that most of time is taken during the execution of the com.crystaldecisions.report.web.viewer.ReportExportControl Object method as shown in following line of code
    exportControl.processHttpRequest(request, response, context, null)
    We thought the delay in exporting the report to PDF might be the layout of the report and data conversion to PDF for such a bigger volume of data.
    Then we investigated the issue and experimented quickly to generate the same report with same result set data from the application using XML, XSL and converted the output XSL-FO to PDF using Apache FOP (Formatting Objects Processor) implementation. The time taken to export the report to PDF is less than 6 seconds. By doing this experiment, it is proved that the issue is not with conversion of data to PDF but it is the performance problem with Business Objects Java JRC API in CR XI R2.
    In this regard, I searched for the above issue in the SAP community Network Forums -> Crystal Reports and Xcelsius -> Java Development -> Crystal Reports. But I did not find any answers or solutions for this kind of issue in the forums.
    Any suggestion, hint in this matter is very much appreciated.

    Ted, The setReportAppServer problem is resolved. Now I could able to generate the report with hardcoded values in the SQLs in just 6 seconds where as the same report was generated in CRXI R2 in 1 minute 15 seconds as mentioned in the earlier message.
    But, our exisiting application passes the parameter values to the SQLs embedded in the report. For some reason the parameters are not being passed to the report and the report displays only the labels without data.
    As per the crj 12 samples codes, the code is written as shown below.
    1. Created ReportClient Document
    2. SetReportAppServer
    3. Open the report
    4. Getting DatabaseController and switching the database connection at runtime
    5. Then setting the parameters as detailed below
    ParameteFields parameterFieldController = reportClientDoc.getDataDefController().getParameterFieldController();
    parameterFieldController.setCurrentValue("", "paramname",paramvalue);
    parameterFieldController.setCurrentValue("", "paramname",paramavalue);
    byteArrayInputStream = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF); 
    6. Streaming the report to the browser
    Why the parematers are not being passed to the report?  Do I need to follow the order of setting these parameters?  Did I miss any line of code for setting Params using  crj 12?
    Any help in this regard would be greatly appreciated.

  • Performance problems with jdk 1.5 on Linux plattform

    Performance problems with jdk 1.5 on Linux plattform
    (not tested on Windows, might be the same)
    After refactoring using the new features from java 1.5 I lost
    performance significantly:
    public Vector<unit> units;
    The new code:
    for (unit u: units) u.accumulate();
    runs more than 30% slower than the old code:
    for (int i = 0; i < units.size(); i++) units.elementAt(i).accumulate();
    I expected the opposite.
    Is there any information available that helps?

    Here's the complete benchmark code I used:package test;
    import java.text.NumberFormat;
    import java.util.ArrayList;
    import java.util.Iterator;
    import java.util.LinkedList;
    import java.util.Vector;
    public class IterationPerformanceTest {
         private int m_size;
         public IterationPerformanceTest(int size) {
              m_size = size;
         public long getArrayForLoopDuration() {
              Integer[] testArray = new Integer[m_size];
              for (int item = 0; item < m_size; item++) {
                   testArray[item] = new Integer(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              for (int index = 0; index < m_size; index++) {
                   builder.append(testArray[index]);
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getArrayForEachDuration() {
              Integer[] testArray = new Integer[m_size];
              for (int item = 0; item < m_size; item++) {
                   testArray[item] = new Integer(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              for (Integer item : testArray) {
                   builder.append(item);
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getArrayListForLoopDuration() {
              ArrayList<Integer> testList = new ArrayList<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testList.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              for (int index = 0; index < m_size; index++) {
                   builder.append(testList.get(index));
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getArrayListForEachDuration() {
              ArrayList<Integer> testList = new ArrayList<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testList.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              for (Integer item : testList) {
                   builder.append(item);
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getArrayListIteratorDuration() {
              ArrayList<Integer> testList = new ArrayList<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testList.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              Iterator<Integer> iterator = testList.iterator();
              while(iterator.hasNext()) {
                   builder.append(iterator.next());
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getLinkedListForLoopDuration() {
              LinkedList<Integer> testList = new LinkedList<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testList.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              for (int index = 0; index < m_size; index++) {
                   builder.append(testList.get(index));
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getLinkedListForEachDuration() {
              LinkedList<Integer> testList = new LinkedList<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testList.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              for (Integer item : testList) {
                   builder.append(item);
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getLinkedListIteratorDuration() {
              LinkedList<Integer> testList = new LinkedList<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testList.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              Iterator<Integer> iterator = testList.iterator();
              while(iterator.hasNext()) {
                   builder.append(iterator.next());
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getVectorForLoopDuration() {
              Vector<Integer> testVector = new Vector<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testVector.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              for (int index = 0; index < m_size; index++) {
                   builder.append(testVector.get(index));
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getVectorForEachDuration() {
              Vector<Integer> testVector = new Vector<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testVector.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              for (Integer item : testVector) {
                   builder.append(item);
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
         public long getVectorIteratorDuration() {
              Vector<Integer> testVector = new Vector<Integer>();
              for (int item = 0; item < m_size; item++) {
                   testVector.add(item);
              StringBuilder builder = new StringBuilder();
              long start = System.nanoTime();
              Iterator<Integer> iterator = testVector.iterator();
              while(iterator.hasNext()) {
                   builder.append(iterator.next());
              long end = System.nanoTime();
              System.out.println(builder.length());
              return end - start;
          * @param args
         public static void main(String[] args) {
              IterationPerformanceTest test = new IterationPerformanceTest(1000000);
              System.out.println("\n\nRESULTS:");
              long arrayForLoop = test.getArrayForLoopDuration();
              long arrayForEach = test.getArrayForEachDuration();
              long arrayListForLoop = test.getArrayListForLoopDuration();
              long arrayListForEach = test.getArrayListForEachDuration();
              long arrayListIterator = test.getArrayListIteratorDuration();
    //          long linkedListForLoop = test.getLinkedListForLoopDuration();
              long linkedListForEach = test.getLinkedListForEachDuration();
              long linkedListIterator = test.getLinkedListIteratorDuration();
              long vectorForLoop = test.getVectorForLoopDuration();
              long vectorForEach = test.getVectorForEachDuration();
              long vectorIterator = test.getVectorIteratorDuration();
              System.out.println("Array      for-loop: " + getPercentage(arrayForLoop, arrayForLoop) + "% ("+getDuration(arrayForLoop)+" sec)");
              System.out.println("Array      for-each: " + getPercentage(arrayForLoop, arrayForEach) + "% ("+getDuration(arrayForEach)+" sec)");
              System.out.println("ArrayList  for-loop: " + getPercentage(arrayForLoop, arrayListForLoop) + "% ("+getDuration(arrayListForLoop)+" sec)");
              System.out.println("ArrayList  for-each: " + getPercentage(arrayForLoop, arrayListForEach) + "% ("+getDuration(arrayListForEach)+" sec)");
              System.out.println("ArrayList  iterator: " + getPercentage(arrayForLoop, arrayListIterator) + "% ("+getDuration(arrayListIterator)+" sec)");
    //          System.out.println("LinkedList for-loop: " + getPercentage(arrayForLoop, linkedListForLoop) + "% ("+getDuration(linkedListForLoop)+" sec)");
              System.out.println("LinkedList for-each: " + getPercentage(arrayForLoop, linkedListForEach) + "% ("+getDuration(linkedListForEach)+" sec)");
              System.out.println("LinkedList iterator: " + getPercentage(arrayForLoop, linkedListIterator) + "% ("+getDuration(linkedListIterator)+" sec)");
              System.out.println("Vector     for-loop: " + getPercentage(arrayForLoop, vectorForLoop) + "% ("+getDuration(vectorForLoop)+" sec)");
              System.out.println("Vector     for-each: " + getPercentage(arrayForLoop, vectorForEach) + "% ("+getDuration(vectorForEach)+" sec)");
              System.out.println("Vector     iterator: " + getPercentage(arrayForLoop, vectorIterator) + "% ("+getDuration(vectorIterator)+" sec)");
         private static NumberFormat percentageFormat = NumberFormat.getInstance();
         static {
              percentageFormat.setMinimumIntegerDigits(3);
              percentageFormat.setMaximumIntegerDigits(3);
              percentageFormat.setMinimumFractionDigits(2);
              percentageFormat.setMaximumFractionDigits(2);
         private static String getPercentage(long base, long value) {
              double result = (double) value / (double) base;
              return percentageFormat.format(result * 100.0);
         private static NumberFormat durationFormat = NumberFormat.getInstance();
         static {
              durationFormat.setMinimumIntegerDigits(1);
              durationFormat.setMaximumIntegerDigits(1);
              durationFormat.setMinimumFractionDigits(4);
              durationFormat.setMaximumFractionDigits(4);
         private static String getDuration(long nanos) {
              double result = (double)nanos / (double)1000000000;
              return durationFormat.format(result);
    }

  • Performance problems with new Java Tiger style recommendations

    Performance problems with jdk 1.5 on Linux plattform
    (not tested on Windows, might be the same)
    using the new style recommendations.
    I need fast Vector loops for high speed mathematical calculations, some
    hints about the fastest way to program that loop would be also great!
    After refactoring using the new features from java 1.5 (as recommended from
    SUN) I lost performance significantly:
    using a vector:
    public Vector<unit> units;
    The new code (recommended from SUN for Java Tiger for redesign):
    for (unit u: units) u.accumulate();
    runs more than 30% slower than the old code:
    for (int i = 0; i < units.size(); i++) units.elementAt(i).accumulate();
    I expected the opposite.
    Is there any information available that helps?
    The following additional information I got from Mr. Shankar Unni:
    I got some fairly anomalous results comparing ArrayList and Vector: for the
    1.5-style loops, ArrayList was faster then Vector, but for a loop with get()
    calls, Vector was faster. Vector was even faster than that using
    elementAt(), which was a surprise:
    For a million summing iterations over a 100-element array:
    vector elementAt loop took 3446 ms.
    vector get loop took 3796 ms.
    vector iterator loop took 5469 ms.
    arraylist get loop took 4136 ms.
    arraylist iterator loop took 4668 ms.

    If your topic doesn't change, please stay in your original post.

  • Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

    Hi everybody,
    we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
    Does anybody detect the same problems?
    Best regards,
    Ulli

    Most important question when you are talking about performance-issues:
    which OC are you working on and which excel version?
    ciao
    Joke

  • Performance Problems with "For all Entries" and a big internal table

    We have big Performance Problems with following Statement:
    SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
      FOR ALL ENTRIES IN gt_zmon_help
        WHERE
        status = 'IAI200' AND
        logdat IN gs_dat AND
        ztrack = gt_zmon_help-ztrack.
    In the internal table gt_zmon_help are over 1000000 entries.
    Anyone an Idea how to improve the Performance?
    Thank you!

    >
    Matthias Weisensel wrote:
    > We have big Performance Problems with following Statement:
    >
    >  
    SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
    >   FOR ALL ENTRIES IN gt_zmon_help
    >     WHERE
    >     status = 'IAI200' AND
    >     logdat IN gs_dat AND
    >     ztrack = gt_zmon_help-ztrack.
    >
    > In the internal table gt_zmon_help are over 1000000 entries.
    > Anyone an Idea how to improve the Performance?
    >
    > Thank you!
    You can't expect miracles.  With over a million entries in your itab any select is going to take a bit of time. Do you really need all these records in the itab?  How many records is the select bringing back?  I'm assuming that you have got and are using indexes on your ZEEDMT_ZMON table. 
    In this situation, I'd first of all try to think of another way of running the query and restricting the amount of data, but if this were not possible I'd just run it in the background and accept that it is going to take a long time.

  • Performance problems with EP 6 and MS IE

    Hi everybody,
    since a couple of days, we are facing a sever performance problem with our SAP EP 6.0. When I access the system with MS Internet Explorer 6.0, it takes 5-10 minutes after the Login. With Firefox Browser, the performance is ok. Therefore I assume that it must be a problem with the IE settings. Does anybody know a solution?
    Best regards,
       Michael

    There are a few things that this could be.  I've seen the setting "Empty Temporary Internet Files folder when browser is closed" cause a lot of performance problems (This is in the advanced settings in your IE).
    This will cause your cache to be cleared out each time the browser is closed and cause a lot more data to be downloaded each time you login to the system.
    For more analysis I'd recommend putting a tool like HTTPWatch into your IE browser and seeing which requests are using the most time.

  • Performance problem with Mavericks.

    Performance problem with Mavericks. My Mac is extremly slow after upgrading to Mavericks. What can i do to solve that?

    If you are still experiencing slow down issues, it maybe because of a few other reasons.
    Our experience with OS X upgrades, and Mavericks is no exception, is that users have installed a combination of third party software and/or hardware that is incompatible and/or is outdated that causes many negative performance issues when upgrading to a new OS X version.
    Your Mac's hard drive maybe getting full.
    Do you run any antivirus software on your Mac? Commercial Antivirus software can slow down and negatively impact the normal operation of OS X.
    Do you have apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac or anything like these apps, installed on your Mac? These types of apps, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
    Your Mac may have way too many applications launching at startup/login.
    Your Mac may have old, non-updated or incompatible software installed.
    Your Mac could have incompatible or outdated web browser extensions, plugins or add-ons.
    Your Mac could have connected third party hardware that needs updated device drivers.
    It would help us to help you if we could have some more technical info about your iMac.
    If you so choose, please download, install and run Etrecheck.
    Etrecheck was developed as a simple Mac diagnostic report tool by a regular Apple Support forum user and technical support contributor named Etresoft. Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
    This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
    It is not malware and can be safely downloaded and installed onto your Mac.
    http://www.etresoft.com/etrecheck
    Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help continue with your Mac performance issues.
    Thank you.

  • There is any Performance problem with Creation of many Y or Z  Programs.

    HI,
    There is any Performance problem with Creation of many Y or Z  Programs. plz give clarity regarding this to me......
    regards
    ganesh

    Ganesh,
    Can you please mention the context and the purpose of creating these custom program.  And application are you referring to?
    Regards,
    Rohit

  • Performance problem with Orcacle / Crystal reports 8.5 / ASP

    Hi,
    I have a performance problem with reports running crystal reports 8.5 with oracle databases.
    Fetching data appears to be slow. Oracle trace reports (tkprof) shows that fetchsize=1.
    Fetchsize in Oracle ODBC is 15 (default).
    How can I update te fetchsize in crystal reports?
    I would appreciate any help.

    CR XI R2 is also still available for purchase. This is the last version of CR to use the RDC. Contact sales at 866-681-3435.
    Make sure the installed versin is 11.5.12.1838 - if it is not, apply SP6:
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    MSM:
    https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip
    - Ludek
    Edited by: Ludek Uher on Jan 4, 2011 10:05 AM

  • Performance problem with ojdbc14.jar

    Hi,
    We are having performance problem with ojdbc14.jar in selecting and updating (batch updates) entries in a table. The queries are taking minutes to execute. The same java code works fine with classes12.zip ans queries taking sub seconds to execute.
    We have Oracle 9.2.0.5 Database Server and I have downloaded the ojdbc14.jar from Oracle site for the same. Tried executing the java code from windows 2000, Sun Solaris and Opteron machines and having the same problem.
    Does any one know a solution to this problem? I also tried ojdbc14.jar meant for Oracle 10g, that did not help.
    Please help.
    Thanks
    Yuva

    My code is doing some thing which might be working well with classes12.zip and which does not work well with ojdbc14.jar? Any general suggestions to make the code better, especially for batch updates.
    But for selecting a row from the table, I am using index columns in the where cluase. In the code using PreparedStatement, setting all the reuired fields. Here is the code. We have a huge index with 14 fields!!. All the parameters are for where clause.
    if(longCallPStmt == null) {
    longCallPStmt = conn.prepareStatement(longCallQuery);
    log(Level.FINE, "CdrAggLoader: Loading tcdragg entry for "
    +GeneralUtility.formatDate(cdrAgg.time_hour, "MM/dd/yy HH"));
    longCallPStmt.clearParameters();
    longCallPStmt.setInt(1, cdrAgg.iintrunkgroupid);
    longCallPStmt.setInt(2, cdrAgg.iouttrunkgroupid);
    longCallPStmt.setInt(3, cdrAgg.iintrunkgroupnumber);
    longCallPStmt.setInt(4, cdrAgg.iouttrunkgroupnumber);
    longCallPStmt.setInt(5, cdrAgg.istateregionid);
    longCallPStmt.setTimestamp(6, cdrAgg.time_hour);
    longCallPStmt.setInt(7, cdrAgg.icalltreatmentcode);
    longCallPStmt.setInt(8, cdrAgg.icompletioncode);
    longCallPStmt.setInt(9, cdrAgg.bcallcompleted);
    longCallPStmt.setInt(10, cdrAgg.itodid);
    longCallPStmt.setInt(11, cdrAgg.iasktodid);
    longCallPStmt.setInt(12, cdrAgg.ibidtodid);
    longCallPStmt.setInt(13, cdrAgg.iaskzoneid);
    longCallPStmt.setInt(14, cdrAgg.ibidzoneid);
    rs = longCallPStmt.executeQuery();
    if(rs.next()) {
    cdr_agg = new CdrAgg(
    rs.getInt(1),
    rs.getInt(2),
    rs.getInt(3),
    rs.getInt(4),
    rs.getInt(5),
    rs.getTimestamp(6),
    rs.getInt(7),
    rs.getInt(8),
    rs.getInt(9),
    rs.getInt(10),
    rs.getInt(11),
    rs.getInt(12),
    rs.getInt(13),
    rs.getInt(14),
    rs.getInt(15),
    rs.getInt(16)
    }//if
    end_time = System.currentTimeMillis();
    log(Level.INFO, "CdrAggLoader: Loaded "+((cdr_agg==null)?0:1) + " "
    + GeneralUtility.formatDate(cdrAgg.time_hour, "MM/dd/yy HH")
    +" tcdragg entry in "+(end_time - start_time)+" msecs");
    } finally {
    GeneralUtility.closeResultSet(rs);
    GeneralUtility.closeStatement(pstmt);
    Why that code works well for classes12.zip (comes back in around 10 msec) and not for ojdbc14.jar (comes back in 6-7 minutes)?
    Please advise.

  • Performance problem with sdn_nn - new 10g install

    I am having a performance problem with sdn_nn after migrating to a new machine. The old Oracle version was 9.0.1.4. The new is 10g. The new machine is faster in general. Most (non-spatial) batch processes run in half the time. However, the below statement is radically slower. The below statement ran in 45 minutes before. On the new machine it hasn't finished after 10 hours. I am able to get a 5% sample of the customers to finish in 45 minutes.
    Does anyone have any ideas on how to approach this problem? Any chance something isn't installed correctly on the new machine (the nth version of the query finishe, albeit 20 times slower)?
    Appreciate any help. Thanks.
    - Jack
    create table nearest_store
    as
    select /*+ ordered */
    a.customer_id,
    b.store_id nearest_store,
    round(mdsys.sdo_nn_distance(1),4) distance
    from customers a,
    stores b
    where mdsys.sdo_nn(
    b.geometry,
    a.geometry,
    'sdo_num_res=1, unit=mile',
    1
    ) = 'TRUE'
    ;

    Dan,
    customers 110,000 (involved in this query)
    stores 28,000
    Here is the execution plan on the current machine:
    CREATE TABLE STATEMENT cost = 81947
    LOAD AS SELECT
    PX COORDINATOR
    PX SEND QC (RANDOM) :TQ10000
    ROW NESTED LOOPS
    1 1 PX BLOCK ITERATOR
    1 1ROW TABLE ACCESS FULL CUSTOMERS
    1 3 PARTITION RANGE ALL
    1 3 TABLE ACCESS BY LOCAL INDEX ROWID STORES
    DOMAIN INDEX STORES_SIDX
    I can't capture the execution plan on the old database. It is gone. I don't remember it being any different from the above (full scan customers, probe stores index once for each row in customers).
    I am trying the query without the create table (just doing a count). I'll let you know on that one.
    I am at 10.0.1.3.
    Here is how I created the index:
    create index stores_sidx
    on stores(geometry)
    indextype is mdsys.spatial_index LOCAL
    Note that the stores table is partitioned by range on store type. There are three store types (each in its own partition). The query returns the nearest store of each type (three rows per customer). This is by design (based on the documented behavior of sdo_nn).
    In addition to running the query without the CTAS, I am also going try running it on a different machine tonight. I let you know how that turns out.
    The reason I ask about the install, is that the Database Quick Installation Guide for Solaris says this:
    "If you intend to use Oracle JVM or Oracle interMedia, you must install the Oracle Database 10g Products installation type from the Companion CD. This installation optimizes the performance of those products on your system."
    And, the Database Installlation Guide says:
    "If you plan to use Oracle JVM or Oracle interMedia, Oracle strongly recommends that you install the natively compiled Java libraries (NCOMPs) used by those products from the Oracle Database 10g Companion CD. These libraries are required to improve the performance of the products on your platform."
    Based on that, I am suspicious that maybe I have the product installed on the new machine, but not correctly (forgot to set fast=true).
    Let me know if you think of anything else you'd like to see. Thanks.
    - Jack

  • Performance problem with table COSS...

    Hi
    Anyone encountered performance problem with these table : COSS, COSB, COEP
    Best Regards

    >
    gsana sana wrote:
    > Hi Guru's
    >
    > this is the select Query which is taking much time in Production. so please help me to improve the preformance with BSEG.
    >
    > this is my select query:
    >
    > select  bukrs
    >               belnr
    >               gjahr
    >               bschl
    >               koart
    >               umskz
    >               shkzg
    >               dmbtr
    >               ktosl
    >               zuonr
    >               sgtxt
    >               kunnr
    >         from  bseg
    >         into  table gt_bseg1
    >          for  all entries in gt_bkpf
    >        where  bukrs eq p_bukrs
    >          and  belnr eq gt_bkpf-belnr
    >          and  gjahr eq p_gjahr
    >          and  buzei in gr_buzei
    >          and  bschl eq  '40'
    >          and  ktosl  ne  'BSP'.
    >
    > UR's
    > GSANA
    Hi,
    This is what I know and please if any expert think its incorrect, please do correct me.
    BSEG is a cluster table with BUKRS, BELNR, GJAHR and BUZEI as the key whereas other key will be stored in database as raw data thus SAP apps will need to convert that raw data first if we are using other keys in where condition. Hence, I suggest to use up to buzei in the where condition and filter other condition in internal table level like using Delete statement. Hope its help.
    Regards,
    Abraham

  • Performance problem with Oracle

    We are currently getting a system developed in Unix/Weblogic/Tomcat/Oracle environment. We have developed a screen that contains 5 or 6 different parameters to select from. We could select multiple parameters in each of these selections. The idea behind the subsequent screens is to attach information to already existing data/ possible future data that matches the selection criteria.
    Based on these selections, existing data located within the system in a table is searched and those that match are selected. Also new rows are created in the table against combinations that do not currently have a match. Frequently multiple parameters are selected, and 2000 different combinations need to be searched in the table. Of these selections, only about 100 or 200 combinations will be available in existing data. So the system is having to insert 1800 rows. The user meanwhile waits for the system to come up with data based on their selections. The user is not willing to wait more than 30 seconds to get to the next screen. In the above mentioned scenario, the system takes more than an hour to insert the new records and bring the information up. We need suggestions to see if the performance can be improved this drastically. If not what are the alternatives? Thanks

    The #1 cause for performance problems with Oracle is not using it correctly.
    I find it hard to believe that with the small data volumes mentioned, that you can have perfornance problems.
    You need to perform a sanity check. Are you using Oracle correctly? Do you know what bind variables are? Are you using indexes correctly? Are you using PL/SQL correctly? Is the instance setup correctly? What about storage, are you using SAME (RAID10) or something else? Etc.
    Facts. Oracle peforms exceptionally well. Oracle exceptionally well.
    Simple example from a benchmark I did on this exact same subject. App-tier developers not understanding and not using Oracle correctly. Incorrect usage of Oracle doing a 100,000 SQL statements. 24+ minutes elapsed time. Doing those exact same 100,000 SQL statement correctly (using bind variables) - 8 seconds elapsed time. (benchmark using Oracle 10.1.0.3 on a Sunfire V20z server)
    But then you need to use Oracle correctly. Are you familiar with the Oracle Concepts Guide? Have you read the Oracle Application Developer Fundamentals Guide?

  • Performance problem with CR SDK

    Hi,
    I'am currently on a customer site and I have the following problem :
    The client have a performance problem with a J2EE application wich call a Crystal report with th CR SDK. To reproduce the problem on the local machine (the CR server), I have developped a little jsp page wich used the Crystal SDK to open a Crystal report on the server (this report is based on a XML data source), setting the new data source (with a new xml data flow) and refresh the report in PDF format.
    The problem is that the 2 first sequences take about 5 seconde each (5 sec for the opening report and 5 seconds for the setting data source). Then the total process take about 15 seconds to open and refresh the document that is very long for a little document.
    The document is a 600Ko file, the xml source is a 80Ko file.
    My jsp page is directly deployed on the tomcat of the Crystal Report Server (CRXIR2 without Service Pack).
    The Filestore and the MySQL database are on the CR server.
    The server is a 4 quadripro (16 proc) with 16Go of RAM and is totally dedicated to Crystal Report. For the moment, there is no activity on the server (it is also used for the test).
    The mains jsp orders are the followings :
    IEnterpriseSession es = CrystalEnterprise.getSessionMgr().logon("administrator", "", "EDITBI:6400", "secEnterprise");
        IInfoStore infoStore = (IInfoStore) es.getService("", "InfoStore");
        IInfoObjects infoObjects = infoStore.query("SELECT * FROM CI_INFOOBJECTS WHERE SI_NAME='CPA_EV' AND SI_INSTANCE=0 ");
        IInfoObject report = (IInfoObject) infoObjects.get(0);
    IReportAppFactory reportAppFactory = (IReportAppFactory)es.getService("RASReportFactory");
    ReportClientDocument reportClientDoc = reportAppFactory.openDocument(report.getID(), 0, null);
    IXMLDataSet xmlDataSet = new XMLDataSet();
    xmlDataSet.setXMLData(new ByteArray(ligne_data_xml));
    xmlDataSet.setXMLSchema(new ByteArray(ligne_schema_xml));
    DatabaseController db = reportClientDoc.getDatabaseController();
    db.setDataSource(xmlDataSet, "", "");
    ByteArrayInputStream bt = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
    My question is : does this method is the good one to do this ?
    Thank's in advance for your help
    Best regards
    Emmanuel

    Hi,
    My problem is not resolved and I have'nt news from the support.
    If you have any idea/info, don't forget me
    Thank's in advance
    Emmanuel

Maybe you are looking for

  • ITunes gets s...l..o...w...e...r with every additional track...

    The only Apple product I use is an iPod Classic, to have the results of 20+ years of music collecting at hand. The more iTunes turns into the all-in-one media+phone center, the more annoying it gets to just use it to manage a friggin mp3 player. Scro

  • Convert Script output data to Text(.txt) file & send mail with attachment.

    Hi All, Requirement: I shulb be able to conver th Script output data to Text(.text) file & send a maill with attachment with this text file. Formant of text file should be like output of Print priview. Plese sugget with Function modules to cover as T

  • Log corruption near block 1737

    hi, i am getting an error while open the db SQL> alter database open; alter database open ERROR at line 1: ORA-00368: checksum error in redo log block ORA-00353: log corruption near block 1737 change 16680088 time 12/22/2008 10:40:13 ORA-00312: onlin

  • Re-send incoming IDOC

    Hi, we created own IDOC type and input function module to create Sales orders from interface data: Incoming file data are converted to IDOCS, IDOC_INBOUND_SINGLE saves IDOCS. Is there a way to re-route IDOCs to outbound? The background is that we hav

  • Error Migrating Ms Access Data

    I use the OMW and everything goes ok, schemas are created etc , but the data won't migrate. I get the following error in the log... Type: Error Time: 02-03-2006 18:15:57 Phase: Migrating Message: Unable to migrate data from source table Table1 to des