Performance problem with transaction log

We are having some performance problem in SAP BW 3.5 system running on MS SQL server 2000.The box is sized 63,574 MB. The transaction logs gets filled up after loading data in to a transactional cube or after doing selective deletion. The size of the transaction log is 7,587MB currently.
Basis team feels that when performing either loading or selective deletion, SQL server views it as a single transaction and doesn't commit until every record is written. And so as a result, transaction logs fills up ultimately bringing the system down.
The system log shows a DBIF error during the transaction log fill up as follows:
Database error 9002 at COM
> [9002] the log file for database 'BWP' is full. Back up the
> Transaction log for the database to free up some log space.
Function COMMIT on connection R/3 failed
Perform rollback
Can we make changes to Database to make commit action frequently? Is there any parameters we could change to reduce the packet size? Is there some setting to be changed in SQL server?
Any Help will be appreciated.

if you have disk space avialable you can allocate more space to the transaction log.

Similar Messages

Problems with transaction-logs on cache engines

Good Day All,
I have a Cache Engine 550 here and the transaction log working.log file got quite large.
I was not able to export it to my ftp server so I logged into the Cache engine via ftp and downloaded the file to a PC.
I then deleted the working.log file on the Cache Engine and rebooted the cache engine.
The working.log file was not re-created as I had hoped it might be.
I have created a file called working.log in the correct directory. This file does not seem to get updated though so this must not be right either.
Any suggestions?
regards,
amanda

Hi Zach,
Thank you so much for writing back. I am running an archaic version of the software... i can check tomorrow. As to the logging.... i had not enabled transaction-logging in itself so it was a silly config error ...
:) amanda

Performance problem with ojdbc14.jar

Hi,
We are having performance problem with ojdbc14.jar in selecting and updating (batch updates) entries in a table. The queries are taking minutes to execute. The same java code works fine with classes12.zip ans queries taking sub seconds to execute.
We have Oracle 9.2.0.5 Database Server and I have downloaded the ojdbc14.jar from Oracle site for the same. Tried executing the java code from windows 2000, Sun Solaris and Opteron machines and having the same problem.
Does any one know a solution to this problem? I also tried ojdbc14.jar meant for Oracle 10g, that did not help.
Please help.
Thanks
Yuva

My code is doing some thing which might be working well with classes12.zip and which does not work well with ojdbc14.jar? Any general suggestions to make the code better, especially for batch updates.
But for selecting a row from the table, I am using index columns in the where cluase. In the code using PreparedStatement, setting all the reuired fields. Here is the code. We have a huge index with 14 fields!!. All the parameters are for where clause.
if(longCallPStmt == null) {
longCallPStmt = conn.prepareStatement(longCallQuery);
log(Level.FINE, "CdrAggLoader: Loading tcdragg entry for "
+GeneralUtility.formatDate(cdrAgg.time_hour, "MM/dd/yy HH"));
longCallPStmt.clearParameters();
longCallPStmt.setInt(1, cdrAgg.iintrunkgroupid);
longCallPStmt.setInt(2, cdrAgg.iouttrunkgroupid);
longCallPStmt.setInt(3, cdrAgg.iintrunkgroupnumber);
longCallPStmt.setInt(4, cdrAgg.iouttrunkgroupnumber);
longCallPStmt.setInt(5, cdrAgg.istateregionid);
longCallPStmt.setTimestamp(6, cdrAgg.time_hour);
longCallPStmt.setInt(7, cdrAgg.icalltreatmentcode);
longCallPStmt.setInt(8, cdrAgg.icompletioncode);
longCallPStmt.setInt(9, cdrAgg.bcallcompleted);
longCallPStmt.setInt(10, cdrAgg.itodid);
longCallPStmt.setInt(11, cdrAgg.iasktodid);
longCallPStmt.setInt(12, cdrAgg.ibidtodid);
longCallPStmt.setInt(13, cdrAgg.iaskzoneid);
longCallPStmt.setInt(14, cdrAgg.ibidzoneid);
rs = longCallPStmt.executeQuery();
if(rs.next()) {
cdr_agg = new CdrAgg(
rs.getInt(1),
rs.getInt(2),
rs.getInt(3),
rs.getInt(4),
rs.getInt(5),
rs.getTimestamp(6),
rs.getInt(7),
rs.getInt(8),
rs.getInt(9),
rs.getInt(10),
rs.getInt(11),
rs.getInt(12),
rs.getInt(13),
rs.getInt(14),
rs.getInt(15),
rs.getInt(16)
}//if
end_time = System.currentTimeMillis();
log(Level.INFO, "CdrAggLoader: Loaded "+((cdr_agg==null)?0:1) + " "
+ GeneralUtility.formatDate(cdrAgg.time_hour, "MM/dd/yy HH")
+" tcdragg entry in "+(end_time - start_time)+" msecs");
} finally {
GeneralUtility.closeResultSet(rs);
GeneralUtility.closeStatement(pstmt);
Why that code works well for classes12.zip (comes back in around 10 msec) and not for ojdbc14.jar (comes back in 6-7 minutes)?
Please advise.

Performance problem with Integration with COGNOS and Bex

Hi Gems
I have a performance problem with some of my queries when integrating with the COGNOS
My query is simple which gets the data for the date interval : "
From Date: 20070101
To date:20070829
When executing the query in the Bex it takes 2mins but when it is executed in the COGNOS it takes almost 10mins and above..
Any where can we debug the report how the data is sending to the cognos. Like debugging the OLEDB ..
and how to increase the performance.. of the query in the Cognos ..
Thanks in Advance
Regards
AK

Hi,
Please check the following CA Unicenter config files on the SunMC server:
- is the Event Adapter (ea-start) running ?, without these daemon no event forwarding is done the CA Unicenter nor discover from Ca unicenter is working.
How to debug:
- run ea-start in debug mode:
# /opt/SUNWsymon/SunMC-TNG/sbin/ea-start -d9
- check if the Event Adaptor is been setup,
# /var/opt/SUNWsymon/SunMC-TNG/cfg_sunmctotng
- check the CA log file
# /var/opt/SUNWsymon/SunMC-TNG/SunMCToTngAdaptorMain.log
After that is all fine check this side it explains how to discover an SunMC agent from CA Unicenter.
http://docs.sun.com/app/docs/doc/817-1101/6mgrtmkao?a=view#tngtrouble-6
Kind Regards

OAV-9016 - Audit Vault 12.1.1 error creating audit trail with TRANSACTION LOG

Hey guys,
I bumped into this problem when trying to start an audit trail with TRANSACTION LOG.
Oracle Audit Vault and Database Firewall 12.1.1.1
Oracle 11gR2 RAC two nodes, OEL x64.
Connection String:
jdbc:oracle:thin:@//192.168.1.139:1521/orcl
I have already ran the sql setup for a REDO_COLL user.
Any ideas?
I have created secure target for each node.
(host01)(oracle@orcl1):log> pwd
/u01/app/oracle/agent/av/log
(host01)(oracle@orcl1):log> cat av.collfwk-8311-0.log
[2013-12-12T17:16:49.855-02:00] [collfwk] [ERROR] [] [] [tid: 22] [ecid: 192.168.1.109:27132:1386867392018:0,0] OAV-9016: Target database global_name is not correct. global_name must include the domain for transaction log collection. Please configure the target database with the correct global_name.CollectionFactory : createCollection : Exception while creating collection. [[
Target database global_name is not correct. global_name must include the domain for transaction log collection. Please configure the target database with the correct global_name.
        at oracle.av.platform.agent.collfwk.impl.redo.RedoCollector.checkDBName(RedoCollector.java:1480)
        at oracle.av.platform.agent.collfwk.impl.redo.RedoCollector.verifySource(RedoCollector.java:1278)
        at oracle.av.platform.agent.collfwk.impl.redo.RedoCollector.startCollector(RedoCollector.java:215)
        at oracle.av.platform.agent.collfwk.impl.redo.RedoCollectorManager.startTrail(RedoCollectorManager.java:199)
        at oracle.av.platform.agent.collfwk.impl.factory.CollectionFactory.createCollection(CollectionFactory.java:504)
        at oracle.av.platform.agent.collfwk.impl.factory.CollectionFactory.createCollection(CollectionFactory.java:354)
        at oracle.av.platform.agent.StartTrailCommandHandler.processMessage(StartTrailCommandHandler.java:63)
        at oracle.av.platform.agent.AgentController.processMessage(AgentController.java:325)
        at oracle.av.platform.agent.AgentController$MessageListenerThread.run(AgentController.java:1859)
        at java.lang.Thread.run(Thread.java:722)
(host01)(grid@+ASM1):~> lsnrctl status
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 12-DEC-2013 17:27:34
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                12-DEC-2013 16:58:03
Uptime                    0 days 0 hr. 29 min. 31 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File         /u01/app/grid/diag/tnslsnr/host01/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.109)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.139)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl1", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl1", status READY, has 1 handler(s) for this service...
The command completed successfully
(host01)(grid@+ASM1):~>
(host01)(grid@+ASM1):~> cat /u01/app/11.2.0/grid/network/admin/listener.ora
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER))))            # line added by Agent
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3))))                # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2))))                # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1))))                # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON                # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON                # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON                # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON              # line added by Agent
(host01)(grid@+ASM1):~>

Hi
Just run the script $AV_AGENT/av/plugins/com.oracle.av.plugin.oracle/config/oracle_user_setup.sql USER_NAME REDO_COLL
This will grant the user some privileges and roles like DBA and CREATE Database Link
I hope this answer your question
Thanks
Ahmed Moustafa

Performance problems with jdk 1.5 on Linux plattform

Performance problems with jdk 1.5 on Linux plattform
(not tested on Windows, might be the same)
After refactoring using the new features from java 1.5 I lost
performance significantly:
public Vector<unit> units;
The new code:
for (unit u: units) u.accumulate();
runs more than 30% slower than the old code:
for (int i = 0; i < units.size(); i++) units.elementAt(i).accumulate();
I expected the opposite.
Is there any information available that helps?

Here's the complete benchmark code I used:package test;
import java.text.NumberFormat;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.Vector;
public class IterationPerformanceTest {
     private int m_size;
     public IterationPerformanceTest(int size) {
          m_size = size;
     public long getArrayForLoopDuration() {
          Integer[] testArray = new Integer[m_size];
          for (int item = 0; item < m_size; item++) {
               testArray[item] = new Integer(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (int index = 0; index < m_size; index++) {
               builder.append(testArray[index]);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getArrayForEachDuration() {
          Integer[] testArray = new Integer[m_size];
          for (int item = 0; item < m_size; item++) {
               testArray[item] = new Integer(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (Integer item : testArray) {
               builder.append(item);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getArrayListForLoopDuration() {
          ArrayList<Integer> testList = new ArrayList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (int index = 0; index < m_size; index++) {
               builder.append(testList.get(index));
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getArrayListForEachDuration() {
          ArrayList<Integer> testList = new ArrayList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (Integer item : testList) {
               builder.append(item);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getArrayListIteratorDuration() {
          ArrayList<Integer> testList = new ArrayList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          Iterator<Integer> iterator = testList.iterator();
          while(iterator.hasNext()) {
               builder.append(iterator.next());
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getLinkedListForLoopDuration() {
          LinkedList<Integer> testList = new LinkedList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (int index = 0; index < m_size; index++) {
               builder.append(testList.get(index));
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getLinkedListForEachDuration() {
          LinkedList<Integer> testList = new LinkedList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (Integer item : testList) {
               builder.append(item);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getLinkedListIteratorDuration() {
          LinkedList<Integer> testList = new LinkedList<Integer>();
          for (int item = 0; item < m_size; item++) {
               testList.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          Iterator<Integer> iterator = testList.iterator();
          while(iterator.hasNext()) {
               builder.append(iterator.next());
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getVectorForLoopDuration() {
          Vector<Integer> testVector = new Vector<Integer>();
          for (int item = 0; item < m_size; item++) {
               testVector.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (int index = 0; index < m_size; index++) {
               builder.append(testVector.get(index));
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getVectorForEachDuration() {
          Vector<Integer> testVector = new Vector<Integer>();
          for (int item = 0; item < m_size; item++) {
               testVector.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          for (Integer item : testVector) {
               builder.append(item);
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
     public long getVectorIteratorDuration() {
          Vector<Integer> testVector = new Vector<Integer>();
          for (int item = 0; item < m_size; item++) {
               testVector.add(item);
          StringBuilder builder = new StringBuilder();
          long start = System.nanoTime();
          Iterator<Integer> iterator = testVector.iterator();
          while(iterator.hasNext()) {
               builder.append(iterator.next());
          long end = System.nanoTime();
          System.out.println(builder.length());
          return end - start;
      * @param args
     public static void main(String[] args) {
          IterationPerformanceTest test = new IterationPerformanceTest(1000000);
          System.out.println("\n\nRESULTS:");
          long arrayForLoop = test.getArrayForLoopDuration();
          long arrayForEach = test.getArrayForEachDuration();
          long arrayListForLoop = test.getArrayListForLoopDuration();
          long arrayListForEach = test.getArrayListForEachDuration();
          long arrayListIterator = test.getArrayListIteratorDuration();
//          long linkedListForLoop = test.getLinkedListForLoopDuration();
          long linkedListForEach = test.getLinkedListForEachDuration();
          long linkedListIterator = test.getLinkedListIteratorDuration();
          long vectorForLoop = test.getVectorForLoopDuration();
          long vectorForEach = test.getVectorForEachDuration();
          long vectorIterator = test.getVectorIteratorDuration();
          System.out.println("Array      for-loop: " + getPercentage(arrayForLoop, arrayForLoop) + "% ("+getDuration(arrayForLoop)+" sec)");
          System.out.println("Array      for-each: " + getPercentage(arrayForLoop, arrayForEach) + "% ("+getDuration(arrayForEach)+" sec)");
          System.out.println("ArrayList for-loop: " + getPercentage(arrayForLoop, arrayListForLoop) + "% ("+getDuration(arrayListForLoop)+" sec)");
          System.out.println("ArrayList for-each: " + getPercentage(arrayForLoop, arrayListForEach) + "% ("+getDuration(arrayListForEach)+" sec)");
          System.out.println("ArrayList iterator: " + getPercentage(arrayForLoop, arrayListIterator) + "% ("+getDuration(arrayListIterator)+" sec)");
//          System.out.println("LinkedList for-loop: " + getPercentage(arrayForLoop, linkedListForLoop) + "% ("+getDuration(linkedListForLoop)+" sec)");
          System.out.println("LinkedList for-each: " + getPercentage(arrayForLoop, linkedListForEach) + "% ("+getDuration(linkedListForEach)+" sec)");
          System.out.println("LinkedList iterator: " + getPercentage(arrayForLoop, linkedListIterator) + "% ("+getDuration(linkedListIterator)+" sec)");
          System.out.println("Vector     for-loop: " + getPercentage(arrayForLoop, vectorForLoop) + "% ("+getDuration(vectorForLoop)+" sec)");
          System.out.println("Vector     for-each: " + getPercentage(arrayForLoop, vectorForEach) + "% ("+getDuration(vectorForEach)+" sec)");
          System.out.println("Vector     iterator: " + getPercentage(arrayForLoop, vectorIterator) + "% ("+getDuration(vectorIterator)+" sec)");
     private static NumberFormat percentageFormat = NumberFormat.getInstance();
     static {
          percentageFormat.setMinimumIntegerDigits(3);
          percentageFormat.setMaximumIntegerDigits(3);
          percentageFormat.setMinimumFractionDigits(2);
          percentageFormat.setMaximumFractionDigits(2);
     private static String getPercentage(long base, long value) {
          double result = (double) value / (double) base;
          return percentageFormat.format(result * 100.0);
     private static NumberFormat durationFormat = NumberFormat.getInstance();
     static {
          durationFormat.setMinimumIntegerDigits(1);
          durationFormat.setMaximumIntegerDigits(1);
          durationFormat.setMinimumFractionDigits(4);
          durationFormat.setMaximumFractionDigits(4);
     private static String getDuration(long nanos) {
          double result = (double)nanos / (double)1000000000;
          return durationFormat.format(result);
}

Performance problems with new Java Tiger style recommendations

Performance problems with jdk 1.5 on Linux plattform
(not tested on Windows, might be the same)
using the new style recommendations.
I need fast Vector loops for high speed mathematical calculations, some
hints about the fastest way to program that loop would be also great!
After refactoring using the new features from java 1.5 (as recommended from
SUN) I lost performance significantly:
using a vector:
public Vector<unit> units;
The new code (recommended from SUN for Java Tiger for redesign):
for (unit u: units) u.accumulate();
runs more than 30% slower than the old code:
for (int i = 0; i < units.size(); i++) units.elementAt(i).accumulate();
I expected the opposite.
Is there any information available that helps?
The following additional information I got from Mr. Shankar Unni:
I got some fairly anomalous results comparing ArrayList and Vector: for the
1.5-style loops, ArrayList was faster then Vector, but for a loop with get()
calls, Vector was faster. Vector was even faster than that using
elementAt(), which was a surprise:
For a million summing iterations over a 100-element array:
vector elementAt loop took 3446 ms.
vector get loop took 3796 ms.
vector iterator loop took 5469 ms.
arraylist get loop took 4136 ms.
arraylist iterator loop took 4668 ms.

If your topic doesn't change, please stay in your original post.

Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

Hi everybody,
we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
Does anybody detect the same problems?
Best regards,
Ulli

Most important question when you are talking about performance-issues:
which OC are you working on and which excel version?
ciao
Joke

Performance Problems with "For all Entries" and a big internal table

We have big Performance Problems with following Statement:
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
FOR ALL ENTRIES IN gt_zmon_help
    WHERE
    status = 'IAI200' AND
    logdat IN gs_dat AND
    ztrack = gt_zmon_help-ztrack.
In the internal table gt_zmon_help are over 1000000 entries.
Anyone an Idea how to improve the Performance?
Thank you!

>
Matthias Weisensel wrote:
> We have big Performance Problems with following Statement:
>
>
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
>   FOR ALL ENTRIES IN gt_zmon_help
>     WHERE
>     status = 'IAI200' AND
>     logdat IN gs_dat AND
>     ztrack = gt_zmon_help-ztrack.
>
> In the internal table gt_zmon_help are over 1000000 entries.
> Anyone an Idea how to improve the Performance?
>
> Thank you!
You can't expect miracles. With over a million entries in your itab any select is going to take a bit of time. Do you really need all these records in the itab? How many records is the select bringing back? I'm assuming that you have got and are using indexes on your ZEEDMT_ZMON table.
In this situation, I'd first of all try to think of another way of running the query and restricting the amount of data, but if this were not possible I'd just run it in the background and accept that it is going to take a long time.

Performance problems with EP 6 and MS IE

Hi everybody,
since a couple of days, we are facing a sever performance problem with our SAP EP 6.0. When I access the system with MS Internet Explorer 6.0, it takes 5-10 minutes after the Login. With Firefox Browser, the performance is ok. Therefore I assume that it must be a problem with the IE settings. Does anybody know a solution?
Best regards,
Michael

There are a few things that this could be. I've seen the setting "Empty Temporary Internet Files folder when browser is closed" cause a lot of performance problems (This is in the advanced settings in your IE).
This will cause your cache to be cleared out each time the browser is closed and cause a lot more data to be downloaded each time you login to the system.
For more analysis I'd recommend putting a tool like HTTPWatch into your IE browser and seeing which requests are using the most time.

Performance problem with Mavericks.

Performance problem with Mavericks. My Mac is extremly slow after upgrading to Mavericks. What can i do to solve that?

If you are still experiencing slow down issues, it maybe because of a few other reasons.
Our experience with OS X upgrades, and Mavericks is no exception, is that users have installed a combination of third party software and/or hardware that is incompatible and/or is outdated that causes many negative performance issues when upgrading to a new OS X version.
Your Mac's hard drive maybe getting full.
Do you run any antivirus software on your Mac? Commercial Antivirus software can slow down and negatively impact the normal operation of OS X.
Do you have apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac or anything like these apps, installed on your Mac? These types of apps, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
Your Mac may have way too many applications launching at startup/login.
Your Mac may have old, non-updated or incompatible software installed.
Your Mac could have incompatible or outdated web browser extensions, plugins or add-ons.
Your Mac could have connected third party hardware that needs updated device drivers.
It would help us to help you if we could have some more technical info about your iMac.
If you so choose, please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic report tool by a regular Apple Support forum user and technical support contributor named Etresoft. Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
It is not malware and can be safely downloaded and installed onto your Mac.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help continue with your Mac performance issues.
Thank you.

There is any Performance problem with Creation of many Y or Z Programs.

HI,
There is any Performance problem with Creation of many Y or Z Programs. plz give clarity regarding this to me......
regards
ganesh

Ganesh,
Can you please mention the context and the purpose of creating these custom program. And application are you referring to?
Regards,
Rohit

Performance problem with Orcacle / Crystal reports 8.5 / ASP

Hi,
I have a performance problem with reports running crystal reports 8.5 with oracle databases.
Fetching data appears to be slow. Oracle trace reports (tkprof) shows that fetchsize=1.
Fetchsize in Oracle ODBC is 15 (default).
How can I update te fetchsize in crystal reports?
I would appreciate any help.

CR XI R2 is also still available for purchase. This is the last version of CR to use the RDC. Contact sales at 866-681-3435.
Make sure the installed versin is 11.5.12.1838 - if it is not, apply SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip
- Ludek
Edited by: Ludek Uher on Jan 4, 2011 10:05 AM

Performance problem with recordset object

Hi,
I have a performance problem with record set object. Is it true using RecordSet object as argument to the method will cause any perfomance degradation?
here is my code.
finStmtList = selectFinancialStatements(rs, shortFormat, latestOnly, true);
I changed the code by populating the recordset in the method that called the above statement. previously the population of valueobject is within the select FinancialStatements.
Now the method looks like
finStmtList = selectFinancialStatements(ValueObject, shortFormat, latestOnly, true);
Is this fix will result in any performance gain?

Can any one suggest me that the above RecordSet Object contains large number of records that counts up to 1000 rows and having 30 columns? I tested the application. But the performance varies from time to time.
Is there any other way to fine tune it?

Performance problem with sdn_nn - new 10g install

I am having a performance problem with sdn_nn after migrating to a new machine. The old Oracle version was 9.0.1.4. The new is 10g. The new machine is faster in general. Most (non-spatial) batch processes run in half the time. However, the below statement is radically slower. The below statement ran in 45 minutes before. On the new machine it hasn't finished after 10 hours. I am able to get a 5% sample of the customers to finish in 45 minutes.
Does anyone have any ideas on how to approach this problem? Any chance something isn't installed correctly on the new machine (the nth version of the query finishe, albeit 20 times slower)?
Appreciate any help. Thanks.
- Jack
create table nearest_store
as
select /*+ ordered */
a.customer_id,
b.store_id nearest_store,
round(mdsys.sdo_nn_distance(1),4) distance
from customers a,
stores b
where mdsys.sdo_nn(
b.geometry,
a.geometry,
'sdo_num_res=1, unit=mile',
1
) = 'TRUE'
;

Dan,
customers 110,000 (involved in this query)
stores 28,000
Here is the execution plan on the current machine:
CREATE TABLE STATEMENT cost = 81947
LOAD AS SELECT
PX COORDINATOR
PX SEND QC (RANDOM) :TQ10000
ROW NESTED LOOPS
1 1 PX BLOCK ITERATOR
1 1ROW TABLE ACCESS FULL CUSTOMERS
1 3 PARTITION RANGE ALL
1 3 TABLE ACCESS BY LOCAL INDEX ROWID STORES
DOMAIN INDEX STORES_SIDX
I can't capture the execution plan on the old database. It is gone. I don't remember it being any different from the above (full scan customers, probe stores index once for each row in customers).
I am trying the query without the create table (just doing a count). I'll let you know on that one.
I am at 10.0.1.3.
Here is how I created the index:
create index stores_sidx
on stores(geometry)
indextype is mdsys.spatial_index LOCAL
Note that the stores table is partitioned by range on store type. There are three store types (each in its own partition). The query returns the nearest store of each type (three rows per customer). This is by design (based on the documented behavior of sdo_nn).
In addition to running the query without the CTAS, I am also going try running it on a different machine tonight. I let you know how that turns out.
The reason I ask about the install, is that the Database Quick Installation Guide for Solaris says this:
"If you intend to use Oracle JVM or Oracle interMedia, you must install the Oracle Database 10g Products installation type from the Companion CD. This installation optimizes the performance of those products on your system."
And, the Database Installlation Guide says:
"If you plan to use Oracle JVM or Oracle interMedia, Oracle strongly recommends that you install the natively compiled Java libraries (NCOMPs) used by those products from the Oracle Database 10g Companion CD. These libraries are required to improve the performance of the products on your platform."
Based on that, I am suspicious that maybe I have the product installed on the new machine, but not correctly (forgot to set fast=true).
Let me know if you think of anything else you'd like to see. Thanks.
- Jack

Performance problem with transaction log

Similar Messages

Maybe you are looking for