Performance Problems with UI Element Tabstrip and IE

Hi,
I use the UI Element "Tabstrip" in a Java Web Dynpro Application. The application gets slower the more I jump from one tab to the next. All the other UI Elements (e.g. ComboBox, TextField) are affected, too.
A system trace on the Web AS seems to indicate that it is a client problem.
We are using the Internet Explorer 6.0.2900.2180 XP SP2 and the J2EE Engine 6.40.
It seems to be a problem with the Tabstrip element in combination with the IE (Firefox 3 works fine). We created a test application with only the tabstrip element, three tabs, and a combo box. After several clicks on the tabs, the test application gets slower...
Does anyone has had the same problem with the tabstrips, or anyone an idea what might be the reason??
Thanks,
Sabine

Open an OSS message (BC-WD-UR).
Armin

Similar Messages

Performance Problems with "For all Entries" and a big internal table

We have big Performance Problems with following Statement:
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
FOR ALL ENTRIES IN gt_zmon_help
    WHERE
    status = 'IAI200' AND
    logdat IN gs_dat AND
    ztrack = gt_zmon_help-ztrack.
In the internal table gt_zmon_help are over 1000000 entries.
Anyone an Idea how to improve the Performance?
Thank you!

>
Matthias Weisensel wrote:
> We have big Performance Problems with following Statement:
>
>
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
>   FOR ALL ENTRIES IN gt_zmon_help
>     WHERE
>     status = 'IAI200' AND
>     logdat IN gs_dat AND
>     ztrack = gt_zmon_help-ztrack.
>
> In the internal table gt_zmon_help are over 1000000 entries.
> Anyone an Idea how to improve the Performance?
>
> Thank you!
You can't expect miracles. With over a million entries in your itab any select is going to take a bit of time. Do you really need all these records in the itab? How many records is the select bringing back? I'm assuming that you have got and are using indexes on your ZEEDMT_ZMON table.
In this situation, I'd first of all try to think of another way of running the query and restricting the amount of data, but if this were not possible I'd just run it in the background and accept that it is going to take a long time.

Problems with photoshop elements 10 and windows 8

I bought photoshop elements 10 for my wife last year for Christmas. She decided not to install it on our old computer because we knew that we were planning to replace the computer this year. We finally got around to replacing it and the new computer came with Windows 8. She installed her photoshop on it and she is having problems with it. I'm wondering if there is a compatability problem with the windows 8? Is there an update for the pse 10 that will make it work with windows 8?

PSE10 is said to be compactable with windows8. What kind of problem are you facing? Did you try launching after resetting preferences? to know more about reseting preferences, check http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

Installation problem with Photoshop Elements 10 and Premiere Elements 10

I purchased in a package Photoshop Elements 10 as well as Premiere Elements 10. It comes with 5 disc....When I install the first disc it does not ask for the 2nd disc once the first disc is done. When the first one was done the option was hit finish and I did and that was it. It did not request the next disc. What do I do?
Thanks
Jim

I have to say that for a reputable company such as Adobe, the instructions for download are totally non existent. The download for purchases on line are controlled by Digital River. I had problems with downloading as the link on the email confirming my purchase didn't work finally found the url link by pasting the email in Front Page and reading the source.
When I finally got through I was advised by the Digital River customer service that I had had too many attempts at downloading the software. When I sent a mail to CS at Digital I received this reply:
"Unfortunately, we do not handle the customer service for Adobe Systems,
Inc. Home. Please contact them directly with your request through one of
the following methods:
Customer Service URL: http://www.adobe.com/ap/support
Customer Service Phone: If available, the regional numbers will be
listed at the URL above.
We apologize for the inconvenience."
I have now run around the adobe site trying to find a way to download the products, but no joy so far.
I tried to get customer serice to call me back , but this service is not available for my country, Thailand.
The final way I am told is to make a call to the customer service at the number listed on my confirmation email.
I already called this number (which I believe I have to pay for) and spent some 10 minutes on the line to what I believe was someone located in India who said he would send me a link for downloading the software.
As they say in the song .... I'm still waiting!!!!!
Adobe, shame on you. Please get your act together. Why can't you handle your own customer service rather than sub contract it out. You charge enough for the product which more than covers the cost

What are the problems with Photoshop Elements 10 and iPhoto in Mountain Lion?

I have Adobe Photoshop Elements 10 and would like to install it on my new iMac with Mountain Lion. I have read about compatibilty issues with iPhoto. Is there a way to correct this or is PSE 11 a better option?

Can I suggest posting this question in the iPhoto forum? There are some true iPhoto wizards there who probably know the answer to your question.
Here's a link for you:
https://discussions.apple.com/community/ilife/iphoto

Problem with Photo Elements 4 and Scanning

I have an HP Photosmart C-4180 All-In-One printer. I can print and scan. I can scan into the HP software or iPhoto but when I try to scan into Photoshop Elements, Photoshop closes down on me and the HP scanning software freezes. Does anyone have any suggestions?

Despite that adobe doc (which I take to mean, "Don't bug us if you have trouble, because we don't like supporting out of date versions"), PE 4 should be just fine in Leopard. It works for everyone I know who has tried it.
The problem may be your scanner plug-in. You might also try removing the Adobe TWAIN driver if you have a dedicated HP plug-in. You don't say which version of PE you have, but PE 1 and 2 are the only versions that totally don't work in Leopard.
Have you tried reinstalling the HP driver/plug-in, and are you sure you have the very latest available?

Problems with Photoshop Elements 13 and Akamai_NetSession_Installer??

I have saved both files to the same folder as instructed but when I try to do the installation it continually goes back to the installation of the Akamai Installer. What am I doing wrong??

Sorry for the inconvenience you are facing.
Please try downloading PSE13 from the link:
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html
and see if it helps.
Thanks,
Anwesha

Had problem with PhotoShop Elements 7 and now with Photoshop 9.

When creating a slideshow the Organizer stops working and closes. What can I do to get back on track?

God knows what but stating your Operating System is a good start here.

Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

Hi everybody,
we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
Does anybody detect the same problems?
Best regards,
Ulli

Most important question when you are talking about performance-issues:
which OC are you working on and which excel version?
ciao
Joke

Performance problems with EP 6 and MS IE

Hi everybody,
since a couple of days, we are facing a sever performance problem with our SAP EP 6.0. When I access the system with MS Internet Explorer 6.0, it takes 5-10 minutes after the Login. With Firefox Browser, the performance is ok. Therefore I assume that it must be a problem with the IE settings. Does anybody know a solution?
Best regards,
Michael

There are a few things that this could be. I've seen the setting "Empty Temporary Internet Files folder when browser is closed" cause a lot of performance problems (This is in the advanced settings in your IE).
This will cause your cache to be cleared out each time the browser is closed and cause a lot more data to be downloaded each time you login to the system.
For more analysis I'd recommend putting a tool like HTTPWatch into your IE browser and seeing which requests are using the most time.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Performance problem with Integration with COGNOS and Bex

Hi Gems
I have a performance problem with some of my queries when integrating with the COGNOS
My query is simple which gets the data for the date interval : "
From Date: 20070101
To date:20070829
When executing the query in the Bex it takes 2mins but when it is executed in the COGNOS it takes almost 10mins and above..
Any where can we debug the report how the data is sending to the cognos. Like debugging the OLEDB ..
and how to increase the performance.. of the query in the Cognos ..
Thanks in Advance
Regards
AK

Hi,
Please check the following CA Unicenter config files on the SunMC server:
- is the Event Adapter (ea-start) running ?, without these daemon no event forwarding is done the CA Unicenter nor discover from Ca unicenter is working.
How to debug:
- run ea-start in debug mode:
# /opt/SUNWsymon/SunMC-TNG/sbin/ea-start -d9
- check if the Event Adaptor is been setup,
# /var/opt/SUNWsymon/SunMC-TNG/cfg_sunmctotng
- check the CA log file
# /var/opt/SUNWsymon/SunMC-TNG/SunMCToTngAdaptorMain.log
After that is all fine check this side it explains how to discover an SunMC agent from CA Unicenter.
http://docs.sun.com/app/docs/doc/817-1101/6mgrtmkao?a=view#tngtrouble-6
Kind Regards

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK. Also I cannot drag the selection to another photo in the photo bin as before.

Hi,
Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha

Performance problems with new Java Tiger style recommendations

Performance problems with jdk 1.5 on Linux plattform
(not tested on Windows, might be the same)
using the new style recommendations.
I need fast Vector loops for high speed mathematical calculations, some
hints about the fastest way to program that loop would be also great!
After refactoring using the new features from java 1.5 (as recommended from
SUN) I lost performance significantly:
using a vector:
public Vector<unit> units;
The new code (recommended from SUN for Java Tiger for redesign):
for (unit u: units) u.accumulate();
runs more than 30% slower than the old code:
for (int i = 0; i < units.size(); i++) units.elementAt(i).accumulate();
I expected the opposite.
Is there any information available that helps?
The following additional information I got from Mr. Shankar Unni:
I got some fairly anomalous results comparing ArrayList and Vector: for the
1.5-style loops, ArrayList was faster then Vector, but for a loop with get()
calls, Vector was faster. Vector was even faster than that using
elementAt(), which was a surprise:
For a million summing iterations over a 100-element array:
vector elementAt loop took 3446 ms.
vector get loop took 3796 ms.
vector iterator loop took 5469 ms.
arraylist get loop took 4136 ms.
arraylist iterator loop took 4668 ms.

If your topic doesn't change, please stay in your original post.

Performance Problems with UI Element Tabstrip and IE

Similar Messages

Maybe you are looking for