Performance rating.

How to design and implement performance ratings of employees in ByD system.
Any ideas.
Anbas
Edited by: on Feb 10, 2012 5:52 AM

Hi Kay,
Yes,I want to develop my own Add-on also looking for the current solution on the same.
My scenario:
There are employees in an organization for them HR will give there respecting performance rating (1,2,3,4,5)
and GM.HR has to approve those ratings.
Also the employee who are all joinning and quiting the org has to be maimtained.
pls advise.
regards,
Anbazhagan S
Edited by: Anbazhagan S on Feb 13, 2012 4:58 AM

Similar Messages

  • Sample report on QM (Vendor performance rating)

    Hi ,
    I need a sample format of a QM report (preferably 2 to3 small reports on a same page) on vendor performance rating.Please suggest as to which is the best method to have multiple queries in same page.I have 4 reports on vendor performance based on cost,Quality,Delivery and management which i want on the same page in the report.
    pawan

    Hi you can create a workbook and include  number of the reports that you need .
    http://help.sap.com/saphelp_nw04/Helpdata/EN/33/746e393cf65c1ae10000000a114084/content.htm
    Regards.

  • Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

    Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
    I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high? 
    How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?  
    Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
    Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
    Thanks for any clarification on these matters.

    siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

  • RESOLVED: CWB: Where do we attach a Performance Rating Scale?

    Hi,
    I can't quite fiture out in which screen we attach a performance rating scale name to a CWB program o Plan.
    In other workds, how does CWB know which Performance Rating scale to use?
    Please clarify .. I've searched in the Implementation guide, viewed the sample setup documents but no luck.
    Thanks.
    Edited by: user13258089 on Dec 17, 2010 7:07 PM

    Lookup type = PERFORMANCE_RATING
    Performance Appraisals does not use this lookup but uses rating scale.

  • Need extra option in Vendor Performance rating in LOV

    For the vendor performance rating, at present we are having two options
    1.Accepted &
    2.Rejected..
    we need one additional option Partially approved..
    plz let me know how to include the additional option.
    regards ,
    Prabhu

    Hai,
    i couldn't find "ERT Results Action" can u kindly tell me the menu path..
    Thank you.

  • Fields/Tables to locate most recent overall performance rating of employee

    Hi,
    I'm looking for the table names and fields that would be involved in determining a person's latest performance rating.  I've spotted  the latest date in HRHAP, but want to be able to tie this to a personnel number and a field that hopefully links to text (Good, Very Good??) regarding the employee's overall rating.  Thanks for any help!
    Zaj

    Hi Zajebiscie
    Love the name!
    Depending upon your implementation (i.e. - if you're using EHP4), you can also rely on HRP7409 (which uses Central Person as the key) to pull the previous performance rating.  For any of these choices though, you're going to have to take the value and the scale and go against the text lookup table to find out what that actual value is.  So in this hypothetical, you'd look at HRP7409 for the max ENDDA of the the CP you're looking for.  Then you'd take the PERFORMANCE field and the SCALE_ID field and go up against T77SP where SCALE_ID = SCALE_ID and PERFORMANCE = RATING and return PSTEXT.
    That way, if your company chooses to change scale year over year, your query will accomodate the change in scale values without skewing past data.
    Let me know if you have any questions.
    Thanks,
    Chris

  • Performance Rating Entry

    Hi guys,
    We are trying to create an application wherein the manager can select the organizational unit from a list of his org units and then click on a button which says 'Enter Rating'. Once the person clicks on 'Enter Rating', he moves on to the next screen where the manager sees the list of people reporting to him and then is able to enter the Performance Rating for each of the employees. Once he is done entering the PR, he hits the save button which saves the PR to IT0025.
    We have got the last part of this application working. We have a custom iView wherein a manager can go in and enter the performance rating for his group of employees. What we are missing is: the screen where the manager can select an org unit from a list of org units and then click on 'Enter Rating'.
    What is the best way to go about this ? Is it possible through configuration or customization ? The aim is to have a Web Dynpro application for sure since we are using SAP 4.7 and EP 7.0.
    Any help is greatly appreciated.
    Thanks,
    Bhushan.

    Set up another partition and install Windows 7 RC now or next month. It won't expire until 4-6 months AFTER Windows 7 has shipped. And it really runs better than even Vista x64 Ultimate SP2 (RC). Night and day, there things in Vista which just aren't right and still buggy.
    You wanted to know why your score for memory was what it is, and giving what I think is why. As for games, even CS4 from Adobe is hampered by Nehalem's Hyper-threading and multicore. But developers love the power and how much faster they can compile, test, and run.
    I agree it doesn't make sense to buy something now, wait for window for free or almost free upgrade.

  • Performance rating under Vista--why is my memory given a lower rating?

    I've been wondering about the Performance rating that Vista generates. My rig rates 5.9 on everything, except Memory where it gets 5.0 for no clear reason. I have 8GB of RAM, all of which Vista seems to recognize, so I don't understand why it downgrades the rating.
    Anyone know how this works?
    Thanks.

    Set up another partition and install Windows 7 RC now or next month. It won't expire until 4-6 months AFTER Windows 7 has shipped. And it really runs better than even Vista x64 Ultimate SP2 (RC). Night and day, there things in Vista which just aren't right and still buggy.
    You wanted to know why your score for memory was what it is, and giving what I think is why. As for games, even CS4 from Adobe is hampered by Nehalem's Hyper-threading and multicore. But developers love the power and how much faster they can compile, test, and run.
    I agree it doesn't make sense to buy something now, wait for window for free or almost free upgrade.

  • Supplier performance rating

    hi gurus
    i am new to supplier performance ration , can anyone share idear generally wat is supplier performance , what measure should be taken , how it is calculated ,
    how should configure in SAP
    REGARDS
    leo

    Hi,
    To rate the performance of your suppliers, you can use specific a pre defined criteria, which your suppliers must meet, to receive a good rating for better delivery , quality etc........for more information refer the below links.
    http://help.sap.com/saphelp_scm50/helpdata/en/2b/3a104202795b33e10000000a155106/content.htm.
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/MMISVE/MMISVE.pdf.
    We can set the performance of the supplier through various criteria such as Price, quality,Delivery,service......for SAP set refer the below wiki link......
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/VendorEvaluationin+MM-PUR
    Hope this may help you.
    BR,
    Patil

  • Performance management overall rating

    When i am navigating to the Give Final Ratings: Main Appraiser
    i want to enable the field for Overall Rating.
    Note i am able to see the overall ratings comments field but i am unable to see the Overall Rating that is linked to the Performance rating in Core HR(Navigation : People >Enter & Maintain>Assignment>Performance)
    how can i view the Overall Rating on the Give Final Ratings: Main Appraiser....plz help
    Appreciate all your help/comments...

    When i am navigating to the Give Final Ratings: Main Appraiser
    i want to enable the field for Overall Rating.
    Ans : Enabled the Overall Rating field at main appraisal page Level using personlization's
    Note i am able to see the overall ratings comments field but i am unable to see the Overall Rating that is linked to the Performance rating in Core HR(Navigation : People >Enter & Maintain>Assignment>Performance)
    Ans : this is seeded functionality this stored in Performance Tab in Core HRMS.
    how can i view the Overall Rating on the Give Final Ratings: Main Appraiser....plz help
    Ans : Enabled the Overall Rating field at main appraisal page Level using personlization's
    Hope it help you.
    Avaneesh

  • Laptop shuts down at "Now Rating System Performance"

    Model number: PSAY3C-04S010
    OS: Windows 7 Home Premium (64-bit)
    I attempted to restore the pre-installed software from the recovery hard disk drive.
    Everything went smoothly, reached the screen "Configuring System... 71/71".
    Then came the screen "Now Rating System Performance".
    The bar would load a bit (maybe around 5%) and the laptop suddenly shuts down without warning.
    I have tried turning the laptop back on, starting Windows normally, and it would bring me back to those 2 screens, and the laptop would shut down again at "Now Rating System Performance".
    I have tried turning the laptop back on 4 or 5 times now, and the result is always the same. The laptop shuts down at that screen.
    What should I do?
    Solved!
    Go to Solution.

    I've confirmed the solution after consulting with a few technicians. Huge thanks to them. I'm sharing this here for anyone who might encounter the same problem in the future.
    The solution: charge the battery to 100%, then with both the battery fully charged and the AC adaptor plugged in, start the laptop again, and the process should complete without any problems.
    What I did wrong was to attempt to do the whole process on AC adaptor alone. I did not use the battery at all. When the performance-rating started, the laptop couldn't draw enough power from the AC adaptor alone, so it shut down automatically. With BOTH the battery and the AC adaptor, the laptop had enough power to finish the entire recovery process.

  • Performance management

    HI Gurus,
    We are working on Performance management we are facing a p[roblem in OPR over all performance rating Can any one help us where can we see the overall performance rating in R/3 like in which table OPR strores
    Regards
    Renuka

    Hello,
    The final appraisal (OPR i guess) in an appraisal document is stored in column 'FAPP'.
    You can read the value of the cell against column 'FAPP'.
    The standard function module like HRHAP_DOCUMENT_GET_DETAIL give you all the data of one appraisal document. You can retrieve your relevant data about final appraisal from there.
    One suggestion: Avoid directly hitting database table as you can end up reading invalid value from a process point of view. Use standard module specially if the document is not yet completed.
    Thansk&Regards,
    Narendra N Shukla

  • Skype Performance Bug under Windows 8 x64 / endles...

    Dear Developers,
    please get rid of an annoying bug under Windows 8 x64 - this bug exists since several versions and still not fixed.
    Summary:
    After a while - maybe associated with energy saving options - a thread in Skype is getting more and more CPU time, causes by a thread always starts with ntdll!RtlGetCurrentPeb+0xf (see att.) <- what does this thread actually?
    Results:
    Heavy CPU usage, slowly Skype response - missing Messages. Only Skype restarts helps.
    I will do more investigation if needed. Let me know.
    Update:
    The thread uninterruptedly reads from
    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices\Audio\Render\*
    Appears to a not catched endless loop?
    Attachments:
    2.PNG ‏19 KB
    3.PNG ‏89 KB

    rsbrux wrote:
    My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS.  OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7.  Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance.  Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6!  What gives?
    P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in.  I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
    After you changed the setting to "Maximum Performance" , did you run the WEI test again?

  • Performance Management: 'Share with Main Appraiser' button not visible

    Hi Gurus,
    I am using Oracle R12.1.3, Performance Management module.
    I am trying to publish Performance Management Plan with Objective setting and Appraisals both tasks. Appraisal plan is set to be appraisee initiated, standard appraisal
    However - When the appraisee is trying to initiate the appraisal (by clicking 'Update' on the appraisal task appeared) - s/he sees all the objectives set and get to choose a performance rating. However - the button 'Share with Main Appraiser' button is not visible.
    When I am trying to create a Performance Management Plan with only 'Appraisals' - this problem is not occurring. Any clue as to how to rectify this problem?
    PS - I have tried disabling personalizations and re-tried several times - but the same error occurs.
    Would really appreciate any response which might help.
    Thanks and Regards,
    Rahul

    I'm thankful for your effort Hussein. However, this document is applicable for version 12.1.4+ while I am working on 12.1.3. I re-tested the thing after making some changes in appraisal template where I ticked 'Update Appraisals for Terminated Workers' and also checking 2 more related check-boxes. Surprisingly it worked.
    Also if I am selecting method for objective allocation as 'Parallel' - then also this error is not occurring - even with old appraisal template. Although this hit and trial worked, I do not have a logical view about the solution and correctness in all environments yet.

  • Warehouse Builder Causing Database Poor Performance

    Since we have upgraded to 10g, OWB's Runtime process does so much I/Os on the Database that it causes it, which is also 10g, to be extremely slow. So much so, that after 2 minutes, it is pratically impossible to login. We only have one OWB developper running this at the time, does anybody know what can cause this?
    Thank you
    Stephanie Comeau

    You are measuring time response from totally 2 different applications.
    It does not mean that C++ has good performance then all application is C++
    should have the same performance rating. It now all depends on the mechanism of
    logic ( program structure ). If yo want to check and investigate what is really going around,
    I suggest using a packect-snooping device. There is a program called 'ethreal' you
    cpoild download from SunFreeware. Hope you catch the fish.

Maybe you are looking for