Performance Report Manager Data Collection Issues

I have an agent running and collecting data in a circular file.... history.log
Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
If you can provide any information as to what to look for, please reply.

history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
Regards,
Mike
[email protected]

Similar Messages

Performance Report Manager not collecting data

I'm running SMC 3.6 with the Performance report manger module installed on the server and hosts. The hosts are logging data to their circular file. But when I open the Report Manager then Data-Data Collection there are no hosts listed in the "Hosts with Data Collection Enabled" or "Hosts with Data Collection Disabled" fields.

PRM is sensitive to host naming issues. If your SunMC Agent resolves it's IP backwards to "hostA.mydomain.com" and your SunMC Server resolves that same IP backwards to "hostA" (or if the situation is reversed) then you'll have problems.
If you do find a mismatch (but SunMC is otherwise running fine - indicating the security is still valid) simply try deleting the icon for a host and recreating it with the proper name. I.E. erase the icon you made for "hostA" and replace it with an icon for "hostA.mydomain.com". It will look and feel the same in the Console, but PRM will treat it differently.
Note that PRM only collects data from the Agent every hour, so it may take that long for your changes to show any effect.
Regards,
[email protected]
http://www.HalcyonInc.com

Report Manager - Data collection

Hi,
I'm having problems with data collection on a number of servers.
Essentially, I've configured data logging on a number of servers
by creating a job in the 'Manage jobs' window, using the task type
'data logging' and running it against a number of hosts.
Unfortunately, when I look at the 'data collection' window via report
manager, a number of host entries have an excamation mark attached
which implies that data has not been collected. If I look at the attribute editor for one of the logged entries on an affected server, the history tab
clearly states that the 'Save History as Disk_File' is ticked.
Any ideas?

I have also seen this issue. Some of these issues were fixed by checking
DNS. For data collection to work both forward and reverse DNS must work
for the agent. If there is a mismatch or missing DNS it doesn't work.
If there is a mismatch in DNS sometimes a re-discovery is required.
Hi,
I'm having problems with data collection on a
number of servers.
Essentially, I've configured data logging on a number
of servers
by creating a job in the 'Manage jobs' window, using
the task type
'data logging' and running it against a number of
hosts.
Unfortunately, when I look at the 'data
collection' window via report
manager, a number of host entries have an excamation
mark attached
which implies that data has not been collected. If I
look at the attribute editor for one of the logged
entries on an affected server, the history tab
clearly states that the 'Save History as Disk_File'
is ticked.
Any ideas?

When or How does the time stamp on Report Manager / Data Collection change

Hi,
I have been waiting since 10am waiting for data to be available. Unfortunately, the Sun MC has not updated the time stamp. I am unable to create graphs for the machines I setup this morning? Any ideas on how to post data faster than waiting forever for Sun MC server?
thanks

Hi,
Clearly a bug. You can try changing your Tools|Preferences|Database|NLS|Timestamp Format to match the Date Format as a workaround. Otherwise why not upgrade to the lastest production SQL Developer release (3.1.07.42)? The bug does not occur there.
Regards,
Gary
SQL Developer Team

Cannot install Performance Reporting Manager - Corrupt db?!?!?

Hi all,
We previously had PRM running but disabled it as it didnt seem to run very well. We are trying to reinstall it now but are hitting a few problems.
Launching /opt/SUNWsymon/sbin/es-uninst and selecting the Performance Reporting Manager option to uninstall fails:-
Unable to complete Sun Management Center cleanup
Error cleaning up core schema ...
Performance Reporting Manager database environment not completely removed.
Please see /var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859 for more details.
PRM database removal failed
A problem occurred with Performance Reporting Manager uninstall.
Making list of packages to uninstall...
Sorting list of packages according to reverse timestamp...
Removing package : SUNWesdrg...
Removal of <SUNWesdrg> was successful.
Removing package : SUNWessrg...
Removal of <SUNWessrg> was successful.
Removing package : SUNWeslrg...
Removal of <SUNWeslrg> was successful.
Removing package : SUNWescrg...
Removal of <SUNWescrg> was successful.
Removing package : SUNWesprm...
Removal of <SUNWesprm> was successful.
Removing package : SUNWesarg...
Removal of <SUNWesarg> was successful.
Looking at the "/var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859"; log I can see:-
Starting database...
Successfully enabled service sunmc-database
Found previous reference schema
Database Error Encountered...
ERROR: function sp_delete_group_objects() does not exist
HINT: No function matches the given name and argument types. You may need to add explicit type casts.
Unable to complete Sun Management Center cleanup
Error cleaning up core schema ...
Stopping database...
Successfully disabled service sunmc-database
Performance Reporting Manager database environment not completely removed.
Please see /var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859 for more details.
PRM database removal failed
As I cannot uninstall all the database correctly I can't seem to install it either, even when I select NOT to preserve data.
Any help would be appreciated.
Cheers
Neil

Got it working. Can now use my DiNovo Keyboard without its dongle. Yeah. NO BSODS.
This is what I did. I put in the dongle for the keyboard, rebooted to an account with Admin privileges, used flashcards to go to BT not the F8 key the actual BT one that shows your comp name and ID#. I removed the dongle for the keyboard, turned on the keyboar adn clicked its connect button, clicked the flashcard and it brought up BT Settings. It did not BSOD. So I think Imo454 has it right about the dongle and using it for drivers. Although it did not show anything installing. Set up device, it saw keyboard, I configured settings, closed BT setting manager and now have Icon in tray and BT information manager works.
Reinstall your stack again and then try this. I also gave my users permission to the BT Manager and BT Info. I don't think that made a diff but it can't hurt. Not full permission but write and mod as well as the standard read.
The Toshiba stack from what I can tell is very persnickity. Everywhere I have read to fix this talks of this. I got my stack from the Toshiba Europe site. They have more current stacks than USA. Plus if you run on Toshiba HW you do not need a new key.
Thanks to you Imo454 and to Jerry.

Campus Manager Data Collection always Idle

Hello,
Every time I start Campus Manager Data Collection, I get a window "Notified server to run Campus Data Collection" but status always stay Idle (not running).
LMS 3.2
Campus Manager 5.2.1
Thanks

most likely you are hitting the following bug CSCtd49439

LMS 3.2 Data Collection Issue

Hi ,
I have LMS 3.2 and license for adding 5000 devices , my data collection is running continously for the past 2 days, when i try to stop the daemon manager and restart it comes to idle state but after some time it again goes to Running state
I am not getting the best practices deviations and discrepaqncies report after this issue
I am attaching the ANIServer.properties , ani.log and ANIServer.log file
Please help

this seems to be BugID CSCtd49439:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtd49439
also consider to install the patch for BugID CSCtg20882:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtg20882
if you have CM 5.2 you should consider to upgrade to CM 5.2.1 which is available here:
http://www.cisco.com/cisco/software/type.html?mdfid=282641773&flowid=5141&softwareid=280775108
the patches for BugIDs CSCtd49439 and CSCtg20882 are availabel by contacting TAC

Please help with creating a summary report from data collected in a fillable PDF form.

I'm sure this has been asked before so I apologize in advance - I'm new to this forum and I'm not quite sure of which section I should be in. If I may just describe a certain scenario of something I am trying to create - could you please point me in the right direction?
I'm looking to create a summary report/form to help me better organize my patients after each appointment. So data collected from other fillable forms I've created, will lead to the final page to print that will include selections from fillable text boxes or drop down lists, etc to basically summarize each encounter. It should go something like this:
FORM 1:
-pt chart #
-pg age
-purpose for visit
-date of visit
-diagnosis
-prognosis
-etc
SUMMARY page
On (-date of visit), patient (-pt chart #) arrived with complaint of (-purpose for visit)....
The diagnosis was determined to be (-diagnosis), treatment to be performed is suggested to be (-treatment) with a (-prognosis) prognosis. Treatment was (accepted or not) and completed on... etc. etc... you get the idea
Does anyone know how I can do this?
Thank you all for your time and advice!

I have downloaded Castor and got some good tutorials, but.......
There is a problem, when I try to use the Marshaller to get an XML document the following error is reported:
java.lang.NoClassDefFoundError: org/apache/xml/serialize/XMLSerializer
I have scanned the Internet looking for a solution, some recommend including Xecers in the Classpath. I downloaded Xerces 2.7.1 and added it to as instructed but this did not work.
Hope you can help

BCS - Data collection issue

Hi,
I'm using BCS 4.0. I'm working now in final testing and I have some question regarding to the data collection process using load from data stream method. I ran the task in consolidation monitor for 007.2007 period and for all companies without any error or warnings, but we have differences in financial information for that period.
I reviewed the content in my BCS cube (RSA1) and we don't have any data for that accounts, the only thing that I found was that all docs were created on same date
I deleted the ID request in RSA1in my BCS cube and I executed task again in consolidation monitor, but the result was the same.
Looking at log / source data, in the rows listed, these data is not taking from the infoprovider
Any idea which could be the problem ?
Thanks
Nayeli

Hi Nayeli,
I had to do this kind of job (reconciliation of data in the source basis cube and the totals cube) during the final testing a lot of times, with an accountant.
The only way to have the first clue what is happening is to compare every particular amount s in both cubes. Comparing and trying to figure out any dependencies in data.
The difference might arise because of ANY reason. Only you may analyze the data and decide what to do.
AFAIU, you compared only reported data and did no currency translation and eliminations?
Then, I'm afraid that you've made a very big mistake deleting the request from the totals cube. You have broken the consistency between totals and document data. For a transactional cube the request is yellow until the number of records in it reach 50000 records. Then it is closed and become green. As you may understand, in those 50000 records maybe contained a lot of data for different posting periods, for example, reported data for the previous closed period. Though, documents still contain eliminations for that period. - Inconsistency.

LMS 4.2 Topology Data Collection Issue

Hi there,
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen". It only shows the following content from first run:
Topology Data Collection    193    0    Not Available     Running    Schedule
Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
Thanks for help.

Hi,
i have reseted the ANI db using NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
Everything is set to 0:
Topology Data Collection      0 0 Not Available                          Running Schedule
UT Major Acquisition            0 (0 End hosts 0 IP Phones) 0      Not Available Idle Schedule
VRF Collection                    0 0                                              Not Available Idle Schedule
But Topology Data Collection is still frozen to "Running" state....

Performance Monitor Remote Data Collection unable to get data

When attempting data collection of a remote Windows 2008 server (Server_B) from another W2k8 server (Server_A) I receive the following error: "When attempting to start the Data Collector Set the following system error occurred: No data to
return."
However remote real-time monitoring of Server_B is no problem. Also, local real-time monitoring and data collection of Server_A is successful.
Is the error due to security restrictions?

Hi Scott,
Would you please let me know whether have administrator rights on the server trying to collect data collector set?
Please type services.msc on RUN. When Services panel opened, please navigate to Performance Logs & Alerts
service and check if it started. Meanwhile, please temporarily disable firewall and monitor the result.
In addition, please refer to following KB and check if can help you.
The Data Collector Set may not start on a computer that is
running Windows Server 2008 or Windows Vista
Performance Monitor data collector set does not collect all
required performance counter data in Windows 7 or in Windows Server 2008 R2
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Campus Manager data collection

Hi
I am getting all the cisco devices discovered in DCR but missing one of the 6513 in the data collection which is already there in DCR.It is also missing in the topology diagram.However this 6513 is reflected in all other modules like DFM , RME and Cisco view.What could be the problem.
Sanjay

Does the device have cdp enabled? If you add it as a seed device does it show up in CM topo services?

Performance data collection issue

Hi,
We are using SCOM 2007 r2.We have some servers not collecting performance data.These servers are up and running fine and generating alerts (Monitoring Working fine). Can any one please suggest us what is the work arround for this.
Thanks&Regards,
Padmaja M.

Try to clear management server health service cache by stopping the system center management service, renaming the health service state folder and starting the service.
Juke Chou
TechNet Community Support

Interactive PDF created in CS6 InDesign data collection issue

Created an interactive form from within CS6 InDesign. Uses text fields and check boxes with a submit button to forward the completed form to an email address. When tested in Acrobat Reader, the collected information will not be submitted, just a copy of the form -- blank. Any obvious solutions to this, perhaps a step I missed when creating in InDesign?
Also, my submit button creates an email to send with form completed data input, and attachements too, can then be included. Is there a way to bypass the attachements step for the email and simply have an Include (browse) for attachements while within the interactive PDF?

Which version of Adobe Reader are you using for testing purposes? Adobe Reader XI introduced the ability to save filled out PDF forms and submit them. For earlier versions as far as I'm aware you'd need to create a Reader Extended PDF, which is something you can do in Acrobat, not InDesign.
If you have Adobe Acrobat:
Open the PDF form you created in InDesign then
File > Save as Other > Reader Extended PDF > Enable More Tools... and test it in Adobe Reader again.
To answer your second question, not that I know... (neither in InDesign or Acrobat).
However, if you have a copy of Adobe LivecycleDesigner, you can add a form object that can be used by users to include attachments.
Cari

SIS Report- Old Data update Issue

Hi All,
The relevant configuration has been done for activating SIS report. Using the T-Code: OLI7,OLI8,OLI9, I have updated the data for the infostructure: S001 and copied the same to OLIX, but still the report shows only New document value in MC+E report.
I followed the below link, but eventhough the old document data is not showing in the report.
http://scn.sap.com/docs/DOC-29547
Please anyone help me to get the old data in the MC+E,MCTA report.
Regards,
Mythily

Hi All,
The relevant configuration has been done for activating SIS report. Using the T-Code: OLI7,OLI8,OLI9, I have updated the data for the infostructure: S001 and copied the same to OLIX, but still the report shows only New document value in MC+E report.
I followed the below link, but eventhough the old document data is not showing in the report.
http://scn.sap.com/docs/DOC-29547
Please anyone help me to get the old data in the MC+E,MCTA report.
Regards,
Mythily

Performance Report Manager Data Collection Issues

Similar Messages

Maybe you are looking for