Performance Report Manager not posting png files

PRM on 3.5.1u1 will not generate png files for scheduled reports. However, when I run the report manually and post manually from the generated report, it works just fine. Any ideas on what I'm missing (directory ownership hasn't changed or anything like that)?

Do an unsetenv on DISPLAY environment variable and restart all services on the server layer from the same shell.

Similar Messages

  • Performance Report Manager not collecting data

    I'm running SMC 3.6 with the Performance report manger module installed on the server and hosts. The hosts are logging data to their circular file. But when I open the Report Manager then Data-Data Collection there are no hosts listed in the "Hosts with Data Collection Enabled" or "Hosts with Data Collection Disabled" fields.

    PRM is sensitive to host naming issues. If your SunMC Agent resolves it's IP backwards to "hostA.mydomain.com" and your SunMC Server resolves that same IP backwards to "hostA" (or if the situation is reversed) then you'll have problems.
    If you do find a mismatch (but SunMC is otherwise running fine - indicating the security is still valid) simply try deleting the icon for a host and recreating it with the proper name. I.E. erase the icon you made for "hostA" and replace it with an icon for "hostA.mydomain.com". It will look and feel the same in the Console, but PRM will treat it differently.
    Note that PRM only collects data from the Agent every hour, so it may take that long for your changes to show any effect.
    Regards,
    [email protected]
    http://www.HalcyonInc.com

  • Reports are not posting with report repository webserver configured for Sin

    Hi Everyone,
    We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
    Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
    Report Node Definition
    Node Name: uadb1
    URL: https://dv001.test.com:8450/psreports/uadb1
    Connection Information
    https
    URI Port: 8450
    URI Host: dv001.test.com
    URI Resource: SchedulerTransfer/uadb1
    Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

    Duplicated thread : Reports not posting if using Single Signon webserver as report repo
    Nicolas.

  • Cannot install Performance Reporting Manager - Corrupt db?!?!?

    Hi all,
    We previously had PRM running but disabled it as it didnt seem to run very well. We are trying to reinstall it now but are hitting a few problems.
    Launching /opt/SUNWsymon/sbin/es-uninst and selecting the Performance Reporting Manager option to uninstall fails:-
    Unable to complete Sun Management Center cleanup
    Error cleaning up core schema ...
    Performance Reporting Manager database environment not completely removed.
    Please see /var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859 for more details.
    PRM database removal failed
    A problem occurred with Performance Reporting Manager uninstall.
    Making list of packages to uninstall...
    Sorting list of packages according to reverse timestamp...
    Removing package : SUNWesdrg...
    Removal of <SUNWesdrg> was successful.
    Removing package : SUNWessrg...
    Removal of <SUNWessrg> was successful.
    Removing package : SUNWeslrg...
    Removal of <SUNWeslrg> was successful.
    Removing package : SUNWescrg...
    Removal of <SUNWescrg> was successful.
    Removing package : SUNWesprm...
    Removal of <SUNWesprm> was successful.
    Removing package : SUNWesarg...
    Removal of <SUNWesarg> was successful.
    Looking at the "/var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859"; log I can see:-
    Starting database...
    Successfully enabled service sunmc-database
    Found previous reference schema
    Database Error Encountered...
    ERROR:  function sp_delete_group_objects() does not exist
    HINT: No function matches the given name and argument types. You may need to add explicit type casts.
    Unable to complete Sun Management Center cleanup
    Error cleaning up core schema ...
    Stopping database...
    Successfully disabled service sunmc-database
    Performance Reporting Manager database environment not completely removed.
    Please see /var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859 for more details.
    PRM database removal failed
    As I cannot uninstall all the database correctly I can't seem to install it either, even when I select NOT to preserve data.
    Any help would be appreciated.
    Cheers
    Neil

    Got it working. Can now use my DiNovo Keyboard without its dongle. Yeah. NO BSODS.
    This is what I did. I put in the dongle for the keyboard, rebooted to an account with Admin privileges, used flashcards to go to BT not the F8 key the actual BT one that shows your comp name and ID#. I removed the dongle for the keyboard, turned on the keyboar adn clicked its connect button, clicked the flashcard and it brought up BT Settings.  It did not BSOD.  So I think Imo454 has it right about the dongle and using it for drivers.  Although it did not show anything installing.  Set up device, it saw keyboard, I configured settings, closed BT setting manager and now have Icon in tray and BT information manager works.
    Reinstall your stack again and then try this.  I also gave my users permission to the BT Manager and BT Info.  I don't think that made a diff but it can't hurt.  Not full permission but write and mod as well as the standard read. 
    The Toshiba stack from what I can tell is very persnickity.  Everywhere I  have read to fix this talks of this.  I got my stack from the Toshiba Europe site.  They have more current stacks than USA.  Plus if you run on Toshiba HW you do not need a new key.
    Thanks to you Imo454 and to Jerry.

  • Document parked not posting, approved by manager not posting

    Hi experts,
    Document parked not posting, approved by manager not posting.Could you please assist us ASAP.
    Thanks & Best regards
    Sreenivas

    Hi Srini,
    To post the parked document you can use the Transaction FBV0. If workflow is involved in the process check with your workflow consultant to know the status and rerun/trigger the workflow manually according to your requirement.
    Warm regards,
    Murukan Arunachalam

  • TFS performance report pack not working on TFS 2013

    Hi
    I have TFS 2013 setup and I found TFS performance report pack from http://blogs.msdn.com/b/granth/archive/2009/02/03/announcing-tfs-performance-report-pack.aspx URL.
    These reports don't work after uploading to my report server. The blog talk about creating a shared data source TfsActivityReportDS
    and using Data Source=localhost;Initial Catalog=TfsActivityLogging
    as connection string.
    I don't have any database by name TfsActivityReportDS in my TFS and as a result I am not able to run any report on my TFS 2013 server.
    Is there any way to get these reports work for TFS 2013? Or is there other TFS performance report pack made for TFS 2013?
    Regards, Premal Acharya

    Hi Charles,
    Thanks a ton for your help. :)
    It worked on TFS 2013. I followed your steps. I also found one easy way to edit the queries mentioned in those rdl files. I opened them in text editor and replaced TfsActivityLogging with my TFS project name (Tfs_DefaultCollection). Saved rdl file and opened
    it in report builder and then my job was only to modify the data source.
    I really appreciate your help for getting the reports worked on TFS 2013.
    However I am only stuck with one little issue pertained to Server Status - Source Control Request Queue.rdl file
    This report file doesn't have any queries and it also uses XML as connection to the data source. When I run this report on my TFS server I am getting error as URL "http://localhost:8080/versioncontrol/v1.0/administration.asmx" not found.
    Detailed information about the report file is given below.
    Report Name
    Server Status - Source Control Request Queue
    Connection type
    XML
    Connection string in data source 
    http://localhost:8080/versioncontrol/v1.0/administration.asmx
    Query Under data set
    <Query>
       <Method Name="QueryServerRequests" 
    Namespace="http://schemas.microsoft.com/TeamFoundation/2005/06/VersionControl/Admin/03">
       </Method>
       <ElementPath IgnoreNamespaces="true">*</ElementPath>
    </Query>
    -------END---------
    I don't know how to get it work. Your help and advice on this will be highly appreciated.
    Thanks again for helping me to get other reports worked with TFS 2013.
    Regards, Premal Acharya

  • Report node - not posted

    Hi,
    Reports are not getting posted and found the below message on the message log. Any help on this is highly appreciated.
    Error getting report repository file statistics for process instance: 1812 (63,104)
    PSUNX failed to post files to the report repository.  Server scheduled to try again on 2013-09-25-13.47.49.112355.  See log /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/_PSDSTSRVLOG/transfer_1630.log
    ===========
    pshcmadm@fcas111:/facs/proj/peoplesoft/PT8.52/appserv/prcs/HRSND1/log_output/_PSDSTSRVLOG $ view transfer_1630.log
    about to submit ftp -vin /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/_PSDSTSRVLOG/ftp_1630.txt
    Connected to fcws110.fcs.facs.com.
    220 "WARNING! THIS IS A PRIVATE COMPUTER SYSTEM. USAGE MAY BE MONITORED AND UNAUTHORIZED ACCESS OR USE MAY RESULT IN CRIMINAL OR CIVIL PROSECUTION. Except for some privacy rights granted by applicable law, by signing on to the system you acknowledge: You do not have any expectation of privacy in your use of the system. You are familiar with, understand, accept, and will comply with the provisions of Company Directive."
    331 Please specify the password.
    230 Login successful.
    Remote system type is UNIX.
    Using binary mode to transfer files.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    257 "/facs/.p_peoplesoft/peoplesoft/PT8.52/psreports/HRCS/20130925/1616" created
    250 Directory successfully changed.
    200 Switching to ASCII mode.
    local: /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/AE_AEMINITEST_1812/AE_AEMINITEST_1812.stdout remote: AE_AEMINITEST_1812.stdout
    229 Entering Extended Passive Mode (|||43865|)
    150 Ok to send data.
    226 File receive OK.
    303 bytes sent in 00:00 (415.00 KB/s)
    221 Goodbye.
    File Transfer Successful
    ============

    We are getting the not posted issue, only when we enable the custom sign on peoplecode.
    Thanks
    Soundappan

  • PSE6 Not Opening .PNG Files

    Hi,
    I've seen this question posted before but I haven't been able to find an answer on how to correct it. I am running on a Mac OS and I have PSE6 (recently purchased and downloaded.) I am trying to open my .png files and it isn't working. I get an error message saying this type of file is not compatible (even though I have been able to open them in other versions of PSE.) Does anyone know how to correct this problem?

    Did you drag you PSE icon and put out onto desktop. This might have caused part of the program to not be found. So drag it back under the application file in the correct directory and it should work. If not, I would suggest unloading and reloading.

  • Batch Actions - Export to PNG does not create PNG files

    I am testing Illustator CS4 to see if my department will upgrade to CS4 from CS2.  We do a lot of batch conversion of .eps graphics and have never had a problem in previous versions of Illustrator including CS2.
    I have created a new Set and Action to Export all .eps files  to .png files from a specific folder.  All the settings appear to be correct and match the settings from CS2.  However, when I run a the bacth on CS4, it appears to go through the motions, the .eps files show the current modified date, but no PNG files are created.  I think this may be a bug, and if this doesn't work, do I try CS3? or stay on CS2 which we rather not do?

    I think you will be happier with CS4 and have a suggestion use Fireworks to batch your files to png.

  • OS X Mavericks - Update 10.9.2 Mail does not send png files

    I updated my macbook pro on Saturday with the 10.9.2 OS X Mavericks update and since then I cannot send a .png file (screenshots etc) by mail, it is not recognized and to the recipient it just arrives like a tone of characters.
    Is there any way I can fix that as I really use mail a lot to send files like that. I even saved the .png file as jpg and still does not recognize it. Actual photos I had on my computer were sent fine.

    Hi Katering,
    This week, I had the same problem.
    I don't know if is the solution... so, i put the name extension to "on" and my .png file are recognize with hotmail...
    Do this with your mac:
    From the Mac OS X Desktop, pull down the “Finder” menu and choose “Finder Preferences”
    Click on the “Advanced” tab (gear icon)
    Check the box next to “Show all filename extensions”

  • Photoshop CC will not save png files

    Photoshop CC will not save anything as a png. I tried uninstalling and reinstalling twice as was suggested on another post similarly discussed. Please help

    I think you should set up again!
    Video-Clip Vui-Clip Shock-Quay Len-Clip Hot-Clip Hài-Tin Shock-Phim Tam Ly 18+-chatvl-phim xxx

  • Media Manager not collecting all files to new destination - Why?

    Specs: 10.5.8 / Final Cut Pro 6.06 / Dual Quad Tower -
    So here's the conundrum. We've got a lot of video projects to backup (about 80) and move to another drive.
    When we go to media manager and ask it to copy files over to a new destination, it grabs MOST of the files associated with the project. But without fail, it will not grab and copy all of the files that were sent to Soundtrack Pro. Any STAP file on Final Cut Pro's timeline gets left behind.
    Why is this?
    Here's a screen cap of our settings...
    http://www.kchtenthusiasts.com/webpics/mediamanager.jpg
    Any and all suggestions appreciated. Thanks!

    Media Manager won't solve this for you; it's a game. You will need to manually locate and move tons of stuff like photographs, music tracks, movies from After Effects or Motion' almost anything FCP did not actually create.
    You must carefully test each of your MM files. Very carefully.
    Instead of relying on MM, ere's another possibility: Just clone your scratch/render/output drives and then remove stuff not associated with the projects. Then copy the FCP project files to the drives. This sometimes works for us because many of our projects use the same footage, over and over again. If we were using MM, we'd be copying the same stuff many times. If we just clone the drives the copies of the FCP projects easily relink to the footage in whatever source folder it might live.
    bogiesan

  • Project Manager not Trimming ProRes Files

    I was hoping that 8.2 would solve this issue, but it hasn't.  When I choose 'Consolidate and Transcode' in Project Manager, it is not trimming my HD 1920x1080 ProRes files.  And in fact, it hardly trims anything. (It does trim a few Avid 1:1 SD files) I've tried virtually every possible combination of settings to get this to work the way the old 'Create Trimmed Project' did, to no avail.  Please help - thanks!

    Premiere CC's Create New Trimmed Project does not support trimming of any MPEG material. If you update to CC 2014 8.1 or 8.2, there is a new option of Consolidate and Transcode that will allow you to transcode to formats that Premiere can export (e.g.: H.264, MXF OP1a, etc.). It still won't trim to .mts, but it might get you closer to your goals.
    Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials
    Adobe Premiere Pro Help | Copy, transcode, or archive projects

  • Project manager not trimming .mts files

    Relatively new to Premiere and struggle to media manage since my switch from FCP7.
    I keep finding that Project manager is not trimming the.mts files, so still stuck with the entire clips.
    Anyone know of any work arounds?
    Premiere Pro CC on a MacPro
    Cheers

    Premiere CC's Create New Trimmed Project does not support trimming of any MPEG material. If you update to CC 2014 8.1 or 8.2, there is a new option of Consolidate and Transcode that will allow you to transcode to formats that Premiere can export (e.g.: H.264, MXF OP1a, etc.). It still won't trim to .mts, but it might get you closer to your goals.
    Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials
    Adobe Premiere Pro Help | Copy, transcode, or archive projects

  • Performance Report Manager Data Collection Issues

    I have an agent running and collecting data in a circular file.... history.log
    Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
    If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
    If you can provide any information as to what to look for, please reply.

    history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
    If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
    Regards,
    Mike
    [email protected]

Maybe you are looking for