Performance Tools Sun Studio 12 under Ubuntu

I want to use the hardware counter under a x86-64 Ubuntu (Feisty). But the system isn't supported by the performance analyzer and the hardware counter aren't available. Exist any opportunity to use it or should i install red hat enterprise or suse enterprise. Gives there any free OS where the HW counters working?

You can try Sun Studio 12 on any machine you want. The 'unsupported' means: it's your choice, you are at your own risk, you are on your own. However, we still would be willing to hear from you, we would also help if we can. Your input and feedback are welcome!
You can even file RFE on bugs.sun.com if you feel the performance on Ubuntu is better, worth recommended, worth to be added to the 'supported platform' list, etc. Voice of Customer is always welcome too!
Rose

Similar Messages

What Sun Studio 12 patches are included in Sun Studio 12 Update 1?

I can't seem to find a bug list or patch list for Sun Studio 12 Update 1. Can someone provide a link or list of what was fixed?
Secondary, how do I know I have Sun Studio 12 Update 1 installed? Does CC -V say 5.9.1?
-kto

I'm not sure about your bug list or patch list question, but on your second question you can use the "version" command.
Just point it at the Sun Studio component you want to check. So for the CC compiler :
% version sunstudio12.1/bin/CC
version of "sunstudio12.1/bin/CC": Sun C++ 5.10 SunOS_sparc 2009/05/02
You can also just type "version" and that will list all the
components of the Sun Studio that are in your PATH, like so :
% version
Machine hardware: i86pc
OS version: 5.10
Processor type: i386
Hardware: i86pc
The following components are installed on your system:
Sun Studio 12 update 1
Sun Studio 12 update 1 C Compiler
Sun Studio 12 update 1 C++ Compiler
Sun Studio 12 update 1 Tools.h++ 7.1
Sun Studio 12 update 1 C++ Standard 64-bit Class Library
Sun Studio 12 update 1 Garbage Collector
Sun Studio 12 update 1 Fortran 95
Sun Studio 12 update 1 Debugging Tools (including dbx)
Sun Studio 12 update 1 IDE
Sun Studio 12 update 1 Performance Analyzer (including collect, ...)
Sun Studio 12 update 1 Performance Library
Sun Studio 12 update 1 Scalapack
Sun Studio 12 update 1 LockLint
Sun Studio 12 update 1 Building Software (including dmake)
Sun Studio 12 update 1 Documentation Set

How install sun studio 12??

hi humans! :] i`m looking for one guide for install sun studio in ubuntu but wen i try to install it hi tell`s me that i have`n a root for install and describes the root and no works ?!

This guide is very short:
1. Download tarfile installer of Sun Studio Express (Sun Studio 12 does not work on Ubuntu) from http://developers.sun.com/sunstudio/downloads/express/index.jsp
2. cd to directory where you want it installed and run
sh sunstudio-Express...(the file you downloaded).

Opening performance analyser in Sun Studio 12

I want to know how to open performance analyzer in sun studio 12?

Yes, Maxim is right, you can start Performance Analyzer standalone tool:
# analyzer
Or you can use it from Sun Studio IDE: main menu "Advanced -> Advanced Profiling -> Start".
It will run your "main" project under "collect", and show the results.
Thanks,
Nik

How to install sun studio 12 under Centos 5???

HI, all,
I am trying to install Sun Studio 12 into Centos 5. The followings are what I did:
1. Download sun studio 12 package by selecting Linex (x86) for Centos from web site and save this package under /var/tmp.
2. I used bzcat to unpack this package by:
bzcat < SunStudio12ml-linux-x86-200709-pkg.tar.bz2 | /bin/tar xvf -
3. I did prepare_system before installation by:
./prepare_system [-d /opt/sun/ ] [-R /var/tmp/ ] [-C | -s netbeans | java | patches | all_patches | jdk_patches | all | print_needed_steps ]
where [-d /opt/sun/ ] is the directory where all missing softwares will be installed, [-R /var/tmp/ ] is the directory where unpacked programs are saved.
After running prepare_system, the resposes are:
bash: -s: command not found
bash: patches: command not found
bash: all_patches: command not found
bash: all: command not found
bash: print_needed_steps: command not found
bash: jdk_patches: command not found
*Usage: gij [OPTION] ... CLASS [ARGS] ...*
to invoke CLASS.main, or
*gij -jar [OPTION] ... JARFILE [ARGS] ...*
to execute a jar file
*Try `gij --help' for more information.*
4. I started to use installer with command line to install the sun studio 12 by:
./installer -nodisplay
The result shows me some exceptions and installation is failed as:
Exception in thread "Thread-1" java.awt.HeadlessException
at java.awt.dnd.DropTarget.<init>(libgcj.so.7rh)
at java.awt.dnd.DropTarget.<init>(libgcj.so.7rh)
at javax.swing.JComponent.<init>(libgcj.so.7rh)
at javax.swing.JPanel.<init>(libgcj.so.7rh)
at javax.swing.JPanel.<init>(libgcj.so.7rh)
at com.sun.wizards.core.WizardComponent.<init>(WizardComponent.java:159)
at com.sun.wizards.core.WizardComposite.<init>(WizardComposite.java:83)
at com.sun.wizards.core.WizardTreeManager.createWizardPanel(WizardTreeManager.java:890)
at com.sun.wizards.core.WizardTreeManager.<init>(WizardTreeManager.java:325)
at com.sun.wizards.core.CommandLineConsole.run(CommandLineConsole.java:75)
at java.lang.Thread.run(libgcj.so.7rh)
Task Failed: java.lang.NullPointerException
java.lang.NullPointerException
at java.lang.Class.isAssignableFrom(libgcj.so.7rh)
at java.util.ResourceBundle.tryBundle(libgcj.so.7rh)
at java.util.ResourceBundle.tryBundle(libgcj.so.7rh)
at java.util.ResourceBundle.getBundle(libgcj.so.7rh)
at java.util.ResourceBundle.getBundle(libgcj.so.7rh)
at com.sun.setup.util.wbResource.getString(wbResource.java:212)
at com.sun.setup.util.wbResource.getString(wbResource.java:132)
at com.sun.setup.util.setupInitializationTask.perform(setupInitializationTask.java:88)
at com.sun.wizards.core.Sequence.perform(Sequence.java:343)
at com.sun.wizards.core.SequenceManager.run(SequenceManager.java:226)
at java.lang.Thread.run(libgcj.so.7rh)
I followed installation instructions to install sun studio 12 under Centos 5. I can not make it. However, I made it under Solaries system.
So, is there any special for Centos 5?
Hunter 3D

Hi,
Thank you for your helps.
According to your suggestions, I downloaded JDK 6 update 10 RC, specifical in Linux platform : self-extracting JDK file named:
jdk-6u10-bin-b28-linux-i586-21-jul-2008.bin
I saved downloading under the directory where sun studio is located.
I used
yum search jdk
to find jdk exists in Centos 5.2 shown as the message as:
[root@localhost sun]# yum search jdk
Loading "priorities" plugin
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirror.raystedman.net
* updates: mirror.raystedman.net
* addons: mirror.voxitas.com
* extras: mirror.raystedman.net
0 packages excluded due to repository priority protections
jakarta-commons-launcher.i386 : The Launcher Component is designed to be a cross platform Java application launcher.
jakarta-commons-collections.i386 : Jakarta Commons Collections Package
mockobjects-alt-jdk1.4.i386 : Mockable API for JDK 1.4
jakarta-commons-beanutils.i386 : Jakarta Commons BeanUtils Package
gnu-crypto-sasl-jdk1.4.i386 : Gnu Crypto SASL API
ldapjdk.i386 : The Mozilla LDAP Java SDK
ldapjdk-javadoc.i386 : Javadoc for ldapjdk
mockobjects-jdk1.4.i386 : MockObjects for 1.4 JDK
I used
./installer -nodisplay
to install sun studio 12 and error message show as:
[root@localhost sun]# ./installer -nodisplay
Exception in thread "Thread-1" java.awt.HeadlessException
at java.awt.dnd.DropTarget.<init>(libgcj.so.7rh)
at java.awt.dnd.DropTarget.<init>(libgcj.so.7rh)
at javax.swing.JComponent.<init>(libgcj.so.7rh)
at javax.swing.JPanel.<init>(libgcj.so.7rh)
at javax.swing.JPanel.<init>(libgcj.so.7rh)
at com.sun.wizards.core.WizardComponent.<init>(WizardComponent.java:159)
at com.sun.wizards.core.WizardComposite.<init>(WizardComposite.java:83)
at com.sun.wizards.core.WizardTreeManager.createWizardPanel(WizardTreeManager.java:890)
at com.sun.wizards.core.WizardTreeManager.<init>(WizardTreeManager.java:325)
at com.sun.wizards.core.CommandLineConsole.run(CommandLineConsole.java:75)
at java.lang.Thread.run(libgcj.so.7rh)
Task Failed: java.lang.NullPointerException
java.lang.NullPointerException
at java.lang.Class.isAssignableFrom(libgcj.so.7rh)
at java.util.ResourceBundle.tryBundle(libgcj.so.7rh)
at java.util.ResourceBundle.tryBundle(libgcj.so.7rh)
at java.util.ResourceBundle.getBundle(libgcj.so.7rh)
at java.util.ResourceBundle.getBundle(libgcj.so.7rh)
at com.sun.setup.util.wbResource.getString(wbResource.java:212)
at com.sun.setup.util.wbResource.getString(wbResource.java:132)
at com.sun.setup.util.setupInitializationTask.perform(setupInitializationTask.java:88)
at com.sun.wizards.core.Sequence.perform(Sequence.java:343)
at com.sun.wizards.core.SequenceManager.run(SequenceManager.java:226)
at java.lang.Thread.run(libgcj.so.7rh)
So, please tell me what I will do.
Thank you.

Can't use profiler (Performance Analyzer) in Sun Studio 12, please help!!

Hi,
I've mandriva 2008 (linux), and I've installed Sun Studio 12.
At the first start of Sun Studio a message appear:
Warning - could not install some modules:
     ATD Sun Studio Core - The module named com.sun.tools.swdev.toolscommon was needed and not found.
     dbx Debugger UI - The module named com.sun.tools.swdev.toolscommon was needed and not found.
     ATD Performance Analyzer Actions - The module named com.sun.forte.st.mpmt/1 was needed and not found.
     ATD Performance Analyzer Actions - The module named com.sun.tools.swdev.toolscommon was needed and not found.
All other modules works correctly, but unfortunately I need the profiler (performance analyzer) because I want to speed up my C++ code. What can I do???
Please help!
NOTE:
I've added to my .bash_profile this lines:
PATH=/opt/sun/sunstudio12/bin:$PATH
export PATH
PATH=/opt/sun/sunstudio12/man/:$PATH
export PATH
LD_LIBRARY_PATH=/opt/sun/sunstudio12/prod/lib
export LD_LIBRARY_PATH
but unfortunately this don't solve the problem....
Edited by: MLX82 on Feb 1, 2008 11:24 PM

If I type `uname -p` this message appear:
[mlx@localhost ~]$ `uname -p`
bash: Intel(R): command not foundIf I type: --userdir won't work as you can see:
sunstudio --userdir /home/mlx/.sunstudio/12.0-Linux-Intel$R$\ Pentium$R$\ M\ processor\ 1.73GHz/I get an 426 line error (but this is the correct location, as man of sunstudio say), while if I type for example:
sunstudio --userdir /home/mlx/error 426 disappears, but I get anyway the error on the module:
Warning - could not install some modules:
     ATD Performance Analyzer Actions - The module named com.sun.forte.st.mpmt/1 was needed and not found.
     ATD Performance Analyzer Actions - The module named com.sun.tools.swdev.toolscommon was needed and not found.
     dbx Debugger UI - The module named com.sun.tools.swdev.toolscommon was needed and not found.
     ATD Sun Studio Core - The module named com.sun.tools.swdev.toolscommon was needed and not found.On the other hand I've searched the "id" exe and it is in /bin:
[mlx@localhost ~]$ id
uid=500(mlx) gid=500(mlx) gruppi=500(mlx)so I've created a sym link:
cd /usr/bin
ln -s /bin/id ./idbut when I start Sun Studio 12 I get again the error on the module.
So I've tryed to reinstall everything (yes, also OS) but it (partially) solves only the problem installing with batch_installer. Infact now I can use batch_installer but at the end of installation it say:
[root@localhost tmp]# ./batch_installer --accept-sla
Installation failed: cleanup successful.Anyway SunStudio 12 still works, but the main problem about the module of performance analyzer is still here...
how can I solve this? Please help!
Edited by: MLX82 on Feb 4, 2008 3:19 PM

Installing Sun Studio 12 on Ubuntu 8.04

When I try to install Sun Studio 12 with the graphical installer, I get a message half was through that Java is not installed. In my case Sun's Java was already installed. I tell the Sun Studio installer to do the update and it finished what it was doing. After the install is done, I found that the Sun Studio executable is missing, so it looked like the installation did not work. What version of Java is Sun Studio expecting and does it need to be tied to a specific path? Is there a known method for installing Java for Sun Studio 12?
After this I uninstalled Java and Netbeans and started the system prep tool, which correctly said I was missing netbeans and java. I had the system prep tool install netbeans successfully but I get this message when trying to install java:
error: Failed dependencies:
glibc >= 2.1.2-11 is needed by jdk-1.5.0_09-fcs.i586
sh-utils >= 2.0-1 is needed by jdk-1.5.0_09-fcs.i586
fileutils >= 4.0-8 is needed by jdk-1.5.0_09-fcs.i586
gawk >= 3.0.4-1 is needed by jdk-1.5.0_09-fcs.i586
textutils >= 2.0-2 is needed by jdk-1.5.0_09-fcs.i586
/bin/sh is needed by jdk-1.5.0_09-fcs.i586
Any suggestions?

I could not find any log files with error information from Express or Sun Studio 12. Any ideas?Not yet :-) Can you try to build and debug a sample project? Does it show the same problem?
I mean one of several sample projects, that are shipped with the Sun Studio IDE.
Start "sunstudio", from main menu: "File->New Project", select Samples->C/C++/Fortran->Welcome
Did you try to run compilers and other tools?
Please, make sure they work. For example, run the following commands:
cc -V
CC -V
f90 -V
collect -V
dbx -V
dmake -v
(Note: the last one is small "v")

Building NCAR Graphics 5.2.1 on Solaris 10 x86u9 under Sun Studio 10 (2005)

Hello,
I've got the following error when compiling ncar program with Sun
cc and f90 and /usr/ccs/bin/ld.
cc -ansi -O -I/usr/openwin/include -I/usr/include/X11 -DSYSV -
D_POSIX_SOURCE -D_XOPEN_SOURCE -DByteSwapped -Di386 -DNeedFuncProto -
c cl.c
cc: Warning: illegal option -nsi
cc: -a conflicts with -dy.
*** Error code 1
make: Fatal error: Command failed for target `cl.o'
After that i've changed the config/SolarisPC file and tried a build with gcc 3.4.3 and f90 but I got
ld fatal: library -lc not found.
I have an old box from 2001 which was under HCL of Solaris 8 x86.
The people at NCAR did not update their configuration files for Solaris 10 x86. The SolarisPC file is old and is using by default g77 as the fortran compiler. Could I mix gcc with f90 ? Which linker should I use in that case?
/usr/ccs/bin/ld or /usr/ucb/ld?

Please refer to the C Users Guide for details of cc command line options. All manuals for Sun Studio 12u1 are listed here:
http://download.oracle.com/docs/cd/E19205-01/index.html
There is no -ansi option in Sun/Oracle C, nor has there ever been. The compiler attempts to interpret it as -a followed by some other letters, which is why you get a complaint about -a. Remove the option.
Depending on what you expect from the -ansi option, either the default compiler behavior or the -Xc option should work. I suggest trying the default behavior (no -X option). Refer to the manual for details.
Always use the /usr/ccs/bin/ld linker, but you normally should not use the ld linker directly. If you mixing C and Fortran, use the f90 driver to do the linking; it knows what Fortran libraries need to be linked, depending on command line option. When linking a program using only C, use the cc driver to link. Some C command-line options require linking special system files; the cc and f90 drivers know the rules.
To mix Fortran with C, refer to the Fortran Users Guide. I recommend using the Studio C compiler when mixing code, not gcc. The requirements of gcc are not known to the f90 driver, but it does know the requirements of Studio C.
The schema for a mixed Fortran and C program is something like this:
cc -c f1.c f2.c <other options>
f90 -c f3.f90 f4.f90 <other options>
f90 -o myprog f1.o f2.0 f3.0 f4.0 <other options>

GUI tools availabe with sun studio 11

I have used sun workshop v5 for a good number of years and am happy with the GUI based tools I use for debugging C, Fortan and soon Ada code whcih link with dbx and emacs.
I have had a trawl through the website but haven't found what I;m looking for.
so the question is : what are the GUI based tools which I could use with sunstudio 11 which will give similar capability to that availabe with sun workshop v5 ?
regards
bladerunner

I guess the base tools in Workshop 5 you mentioned are IDE, dbx. Sun Studio 11 has all of those functions which are much more far better than Workshop 5. The only missing from Sun Studio 11 IDE is project function. It will be back in next release. Take a look at Sun Studio matrix page to see which function is included in Sun Studio 11. The matrix page does not include WS 5 because this version is 5 years old. Here is the URL
http://developers.sun.com/prodtech/cc/support/support_matrix.jsp
-Ngoc

Exceptions not caught in shared library when compiled under Sun Studio 9

I realize it's a fairly old version of Sun Studio, however if at all possibly we'd like to avoid updating to the latest.
Sun Studio 9, version reports
version of "/opt/SUNWspro/bin/../prod/bin/../../bin/cc": Sun C 5.6 2004/07/15
version of "/opt/SUNWspro/bin/../prod/bin/../../bin/CC": Sun C++ 5.6 2004/07/15
uname -a
SunOS sunblade 5.9 Generic_118558-27 sun4u sparc SUNW,Sun-Blade-100
The problem is within our shared library a function calls another method within a try/catch block. This method then sometimes throws an exception which does have a matching catch block. On all other systems (Windows, AIX, HP-UX, Linux) the code works, the exception is caught and handled. On Solaris with Sun Studio 9 though, the exception is ignored and instead triggers an abort and core dump.
Stack Trace:
ffffffff7daa871c lwpkill (6, 0, ffffffff7fffd9c0, ffffffff7d3064d4, 2, ffffffff7fffd9ec) + 8
ffffffff7da3e4b8 abort (ffffffff7d40dac8, ffffffff7d40cc38, ffffffff7d411e78, 10604c, 2, ffffffff7d40dac8) + 100
ffffffff7d3064d4 __1cH__CimplRdefault_terminate6F_v_ (ffffffff7d40dac8, ffffffff7d40cc38, ffffffff7d411e78, 10604c, 104e40, ffffffff7d3064d0) + 4
ffffffff7d3062b4 __1cH__CimplMex_terminate6F_v_ (ffffffff7d40de40, 0, 0, ffffffff7d40de40, ffffffff7d40c978, 1) + 24
ffffffff7d306f04 exthrow_body (ffffffff7d40de40, 0, 0, 105af4, 52, ffffffff7d40e2e8) + 84
ffffffff7d306e58 __1cG__CrunIex_throw6Fpvpkn0AQstatic_type_info_pF1_v_v_ (ffffffff7d40dec8, ffffffff7f0dea78, ffffffff7ecb6b28, ffffffff7d40de40, 0, ffffffff7d40de40) + 3c
ffffffff7ecb6d90 __1cLIGExceptionFThrow6FnQenumIGErrorCodes_pkcxxp2x_v_ (fffffffffffff3e3, 0, 0, 0, ffffffff7f1187da, a0) + 80
ffffffff7ecb6e78 __1cOThrowException6FnQenumIGErrorCodes_pkcxxp1x_v_ (fffffffffffff3e3, 0, 0, 0, ffffffff7f1187da, a0) + 30
ffffffff7f083304 __1cSIGRasterProcessingNVerifyPalette6FpnMIGRasterPage_nTenumIGContrastModes__v_ (1001f3c10, 0, 0, 0, 0, 0) + b4
ffffffff7f083760 __1cSIGRasterProcessingOInvertContrast6FpnMIGRasterPage_nTenumIGContrastModes_nTenumIGColorChannels_pnPtagAT_RECTANGLE__v_ (1001f3c10, 0, 0, ffffffff7fffe1a8, 0, 0) + 20
ffffffff7f039a2c iIG_IP_contrast_invert (1001f3c10, 100162b10, 0, 0, 0, 0) + 104
ffffffff7f039ba0 iIG_IP_contrast_invert_masked (1001f3c10, 100162b10, 0, 0, 0, 0) + 80
000000010000b4e0 ipcontrast_invert_notify (10014d000, 10014d, 0, 100000, 100162000, 100162) + 48
Try/catch block:
     try
          <Triggering function>
     catch(const IGException& ige)
          <Handling Code>
The code which throws the exception is a static method of IGException which has a basic throw line:
     throw IGException(...);
Source code is compiled with the following flags, none of which I could find any info to suggest affect this:
CC -c -Xt -xCC -misalign -xarch=v9 -O
Linking of the shared object is then done via the following, again nothing obvious that could cause issues. mapfile is an empty file.
ld -o <outputfilename> -G -z textoff -M mapfile -z noversion -64 -h <outputfilename> <object files> -L/opt/SUNWspro/lib/v9 -lCrun -lX11 -lc -lm
I did read somewhere mentioning to make sure to use RTLD_GLOBAL if using dlopen on the .so, but the test app is using ld to link the library.
Does anyone have any ideas why with the Sun Studio 9 compiler these exceptions are not being caught? Based on the fact they are caught on all other compilers, i'm guessing this issue is with the compiler.
Also, as a test it seems that if the shared object is not built as a 64-bit object, then everything works. The issue only seems to occur when it is a 64-bit object. Likely an issue with the 64-bit compiling?
Edited by: 837682 on Feb 17, 2011 9:23 AM

As the other poster pointed out, you need to link the shared library using CC, not ld. I should have noticed that error in the original post.
Try using CC instead of ld in your link command. The CC command causes additional files to be linked into the shared library that are required for proper operation, and particularly for exception handling. I think that is the actual source of your problem.
You should not use -L options that point into the compiler installation area, and when you use CC to link, you don't need to.
I'm surprised that you seem to have a copy of libCrun.so.1 in the compiler installation area -- that should not be the case. The the only versions of libCrun should be static libraries libCrun.a. You almost never want to link with a static version of a system library, and absolutely never when building a shared library. The file /opt/SUNWspro/lib/libCrun.so.1 ought to be a symbolic link pointing to /usr/lib/libCrun.so.1, but if that were the case, the version command would have the same output.
By any chance, did you install your compiler by copying it from another installation? If you do that, you need to use tar, not cp, to ensure that symbolic links are preserved.

Poor performance of string::append on Solaris 10 with Sun Studio 10

I found string::append(size_type num, char ch) of libCstd consumes too much cpu time comparing with stlport. Anybody knows if this is a known issue on Solaris 10 and Sun Studio 10? Or if I need to use special build options to build with libCstd?
For example: a.c
#include <iostream>
#include <time.h>
using namespace std;
int main()
string ss;
for ( i=0; i<60000; i++)
ss.append(1, 'A');
cout << clock();
cout << endl;
return 0;
}Build with libCstd:
CC a.c -o a1
Build with stlport:
CC -library=%none -library=stlport4 a.c -o a2
a1 outputs: 10000
a2 outputs: 1900000
You can see how big different they have. I am sure their running environment is same.

I suspect this is due to a bug in libCstd that manifests itself by reallocating the string for each append. Compile and run the program below:
#include <string>
#include <new>
#include <stdlib.h>
int in_main;
void* operator new (size_t nbytes) throw (std::bad_alloc) {
if (in_main) printf ("operator new (%zu)\n", nbytes);
return malloc (nbytes);
void operator delete (void *p) throw () {
if (in_main) printf ("operator delete (%p)\n", p);
free (p);
int main () {
in_main = 1;
std::string ss;
for (int i = 0; i < 256; i++) {
printf ("append(1, 'A')\n");
ss.append (1, 'A');
in_main = 0;
}

Sun Studio 11 do not parse make output and create link to file?

Hi,
Running Sun Studio 11 and can only get file links in the output window when I run a make command that uses CC -g (debug option). We have integrated other tools into our make system (flexlint, cppUnit..) and even though we make sure that the syntax is exactly the same as the compiler output and matches regular expression under tools->options->building->make settings->error expression, it doesn't work. Why do you have to debug compile to get sun studio to create a file link in the output window? Doesn't sun studio just parse the text from the make command?
example of flexlint output for which no link is created:
"/vobs/project/oss/fm/fm4/fm-fmalib/fmbal/fmaaulib/src/FMA_List.cc", line 440: Error 84: sizeof object is zero or object is undefined'�
example of make debug output for which we do get a link:
"/vobs/project/oss/fm/fm4/fm-fmalib/fmbal/SunOS5.10/inc/FMA_alarm_record.hh", line 1310: Warning (Anachronism):Info "static" is not allowed and is being ignored.
Regards,
Ola

I'd second Maxim's suggestion: try NetBeans 5.5 with C/C++ Development Pack. The official release of NetBeans C/C++ Development Pack 5.5 has happened a few days ago. You can download it from
http://www.netbeans.info/downloads/all.php?b_id=2284
Some of the changes between the beta3 build and FCS are:
* Significant performance improvements in the code parser resulting in faster results in the Class View and Code Completion
* Programs now run in an external terminal (system dependent) by default. This allows better input control
* Significant performance improvement in the debugging module
* Significant functionality improvement in the debugging module
* New project type "C/C++ Project From Existing Code" which simplifies creating a project from existing code
* Macro support in code completion
* Hyperlink navigation for macro usages and #include directives
* Reformat code
* Code folding
* Code completion
All these features will appear in next Sun Studio release, so you can
consider NetBeans C/C++ Development Pack 5.5 as a preview of new
Sun Studio IDE.

Sun Studio Express 3/09 Now Available!

Sun Studio Express 3/09, the official build used for the Sun Studio 12 Update 1 Early Access Program, is now available for download:
http://developers.sun.com/sunstudio/downloads/express/index.jsp
The Sun Studio Early Access build is available on Solaris, OpenSolaris and the latest Linux distributions (Red Hat Enterprise Linux, SuSE,Linux Enterprise, CentOS, Ubuntu). Feature highlights since the Sun Studio 12 release include:
* C/C++/Fortran compiler optimizations for the latest x86 architectures from Intel and AMD including SSSE3, SSSE4a, SSe4.1, SSE4.2 compiler intrinsics support
* C/C++/Fortran compiler optimizations for the latest UltraSPARC and SPARC64-based architectures
* DLight - New tool to utilize and visualize the power of Solaris Dynamic Tracing (DTrace) technology
* dbxTool - New stand-alone GUI debugger
* Full OpenMP 3.0 compilers and tools support
* MPI performance analysis in the Performance Analyzer
* NetBeans IDE 6.5 including new remote development features
These new features are all described in the README and wiki pages:
* March 2009 Express README:
http://developers.sun.com/sunstudio/downloads/ssx/express_March2009.html
* Wiki pages:
http://wikis.sun.com/display/SunStudio/Sun+Studio+Express+March+2009+Release
We are exited to hear your feedback on the new features/enhancements in this Early Access build and encourage your participation in the Sun Studio 12 Update 1 Early Access Program so that we can gather valuable feedback to assess the readiness of our release.
Sun Studio 12 Update 1 Early Access Program:
http://developers.sun.com/sunstudio/overview/earlyaccess/index.jsp
View the Sun Studio Express 3/09 podcast to learn more: http://mediacast.sun.com/users/ikroopdhillon/media/sunstudioexpress0309/details
Thanks,
Ikroop Dhillon

Hi,
we are currently using SunStudio 12. I have noticed that early access product, SunStudio Express, Feb2008. It seems that new features coming from NetBeans 6.0 have contributed to SunStudio IDE. I prefer to use SunStudio Express IDE. But i have also noticed that sun CC compiler version is also different. Actually it is no surprise, since SunStudio is a complete product composed of compilers, tools and IDE.Now, i am quite doubtful whether we should use SunStudioExpress. That's why i want to learn when official new release for SunStudio will be announced.
Though i have searched internet, i couldn't notice any news about the next official release of Sun Studio( Sun Studio 13 ). When will this early release( SunStudio Express, Feb 2008 ) be released as SunStudio13? What is the release roadmap of SunStudio?

What Function/Features you want to have in next Sun Studio release?

Hello,
My name is Ngoc Nguyen, from Sun Studio product team. We just shipped Sun Studio 12 ML release (for C, C++, Fortran compiler) past few weeks. We start working on the next release. This is the right time for the community to tell us what feature you want to change or add into next release.
HOW?
Please use the following instruction. It seems long at start, but both you and Sun will get benefit from it on the long run. i.e: By this way, All of your suggestion/request will be logged into our worldwide database system and is assigned an Request for Enhancement (*RFE*) ID. Later You can view the progress of your suggestion/request by using this RFE ID.
- Go to http://bugreport.sun.com/bugreport/
Check the box at the bottom of the page
Click on "Start a new Report"
- Select the following
Type = Request for Enhancement
Product/Category = C/C++/Fortran Compilers and Tools - Misc
Subcategory = C/C++/Fortran Compilers and Tools - Misc
Release = Other
Operating System = <your choice>
- Click on "Continue"
- On the next screen, you only need to fill out the required fields indicated by *.
- The "Synopsis" field should be start with "VOC" word. VOC stands for "Voice of Customer". i.e: "VOC: I want to increase performance on xxxxx component".
- The "Justification" field is important too. general statement like "It is important for us" may not look attractive.
- After all, click on "Submit"
This input collection process will last 10 days and will be ended on Wed Oct/31st.
Looking forward to hear from you.
Best Regards,
Ngoc Nguyen
IMPORTANT: Please don't post your suggestion/request on this forum thread because nobody will help you to log your suggestion into Sun System. Please use the method I outlined above.

Hello,
My name is Ngoc Nguyen, from Sun Studio product team. We just shipped Sun Studio 12 ML release (for C, C++, Fortran compiler) past few weeks. We start working on the next release. This is the right time for the community to tell us what feature you want to change or add into next release.
HOW?
Please use the following instruction. It seems long at start, but both you and Sun will get benefit from it on the long run. i.e: By this way, All of your suggestion/request will be logged into our worldwide database system and is assigned an Request for Enhancement (*RFE*) ID. Later You can view the progress of your suggestion/request by using this RFE ID.
- Go to http://bugreport.sun.com/bugreport/
Check the box at the bottom of the page
Click on "Start a new Report"
- Select the following
Type = Request for Enhancement
Product/Category = C/C++/Fortran Compilers and Tools - Misc
Subcategory = C/C++/Fortran Compilers and Tools - Misc
Release = Other
Operating System = <your choice>
- Click on "Continue"
- On the next screen, you only need to fill out the required fields indicated by *.
- The "Synopsis" field should be start with "VOC" word. VOC stands for "Voice of Customer". i.e: "VOC: I want to increase performance on xxxxx component".
- The "Justification" field is important too. general statement like "It is important for us" may not look attractive.
- After all, click on "Submit"
This input collection process will last 10 days and will be ended on Wed Oct/31st.
Looking forward to hear from you.
Best Regards,
Ngoc Nguyen
IMPORTANT: Please don't post your suggestion/request on this forum thread because nobody will help you to log your suggestion into Sun System. Please use the method I outlined above.

I can�t install Sun Studio 11 in Solaris 8

Hello!!
We are trying to install Sun Studio 11 on our Server.
The server is running under Solaris 8, we install J2SE 1.4.2_10 SDK prior to run the Sun Studio installer, but when we run the installer, it report the following error
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.fetchChildWizards(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.perform(Compiled Code)
at com.sun.wizards.core.Sequence.perform(Compiled Code)
at com.sun.wizards.core.SequenceManager.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at java.lang.reflect.Constructor.newInstance(Native Method)
at install.instantiateArchiveReader(ArchiveClassLoader.java:203)
at install.<init>(ArchiveClassLoader.java:143)
at install.main(Compiled Code
Some one has any idea?
Thank you in advance.
PD: Sorry for my English, I�am a beginner English student, please be pacient.

i've installed java 1.5.0b06 and I can install SUN Studio 11 in Solaris 8
feedback:
==========================================================
# echo $PATH
/usr/j2se/jre1.5.0_06/bin:/usr/j2se/jre1.5.0_06:/usr/sbin:/usr/bin
# java -version
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
==========================================================
but when i try to install
==========================================================
# ./installer -nodisplay
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.fetchChildWizards(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.perform(Compiled Code)
at com.sun.wizards.core.Sequence.perform(Compiled Code)
at com.sun.wizards.core.SequenceManager.run(Compiled Code)
at java.lang.Thread.run(Thread.java:472)
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at java.lang.reflect.Constructor.newInstance(Native Method)
at install.instantiateArchiveReader(ArchiveClassLoader.java:203)
at install.<init>(ArchiveClassLoader.java:143)
at install.main(Compiled Code)
===============================================================
so i am confused or maybe i have to install 1.4.2.10??

Performance Tools Sun Studio 12 under Ubuntu

Similar Messages

Maybe you are looking for