Performance with Boot Camp/Gaming?

Hi,
I just acquired a MBP/2GHz IntelCD/2GB RAM/100GB/Superdrive, with Applecare. Can anyone comment about the performance with
Boot Camp -- running Windows XP SP2, and what the gaming graphics are like?
Appreciate it, thanks...
J.
Powerbook G4 [15" Titanium - DVI] Mac OS X (10.4.8) 667MHz; 1GB RAM; 80GB

Well, I didn't forget to mention what I did not know yet.... So that's not exactly correct..
As per Apple's support page, http://support.apple.com/specs/macbookpro/MacBook_Pro.html
My new computer does have 256MB of video memory...

Similar Messages

  • Performance with boot camp

    If i install boot camp or the fusionware on my mac pro, will it slow down the performance of it? or will it run just as good?

    Hi and welcome to Discussions,
    installing Windows with BootCamp would not slow down your MP since Windows runs exclusively.
    When using Fusionware you might see some slowing down, since you run run it side-by-side with OSX, thus taking away some ressources from OSX.
    How much slow-down you might experience with Fusionware depends on how 'stacked' your MP is and how much of it you assign to Fusionware.
    Regards
    Stefan

  • Wanting to know about gaming performance on boot camp

    Hello I have an Intel imac 20” with 2 GHz core 2 duo processer 2 GB of ram and ATI Radeon HD 2400 128 MB.
    And I will be getting leopard here soon but I basically want it for boot camp so I can play games on my Mac. I have played some games on my Mac but they run very poorly I downloaded unreal tournament 2003 and I couldn’t even run it, the frame rate was terrible it was the same for DOOM 3 it was extremely choppy even on low settings. I am wanting to play games like Command & Conquer 3 which I would just buy the one for Mac computers but after running the games I listed above I don’t think it will work at all is it my hardware or would I be able to run new pc games if I had windows through boot camp?
    Any help would be greatly appreciative thanks.

    Please note for a start that I am a beginner with Macs - only had my 24"iMac for 3 months, never paid much attention to Macs before. (But been playing with PCs and earlier things since they came out, spent 50 years or so with computing software and hardware). I got an iMac for reasons similar to yours, it seems - wanted the stability of the Mac platform (etc etc), but wanted to play 'real' games.
    I set up a 250GB NTFS partition with Boot Camp (& iPartition), installed XP Pro SP2. Been loading and testing 19 assorted games that I like - mostly RPG/FPS, old and new. Of these 3 have NOT worked at all so far, 4 have worked with a bit of fiddling, the rest worked right off. Recent ones such as Guild Wars, The Witcher, Dark Messiah, Dungeon Siege 2, Hellgate London, Assassins Creed, Age of Conan:Hyborian Adventures & Overlord work just fine. Great graphics, decent frame rates, excellent sound. The only 'recent' game that is giving me problems is Elder Scrolls: Oblivion - but that gives everyone problems on PCs too! Especially as its useless as an RPG out of the box, needs extensive mods added that obviously cause problems. Some older games refuse to work - Might & Magic 7, Dungeon Keeper 2, are examples. I have yet to try DOSBox with the older games. The games requiring a bit of fiddling usually needed running in a 'compatibility mode', Win95 or Win98/Me.
    I did have a very poor wireless data rate initially, using Airport (to my access point on the router). Seems a common complaint on these forums. I fixed it (eventually) by turning off Airport, using Ethernet to the router.
    We seem not to play the same games - but if you have specific questions, drop me a line and I shall try to help. I am very happy myself with the iMac as a gaming platform. Room for improvements from Apple? - better keyboard mapping for some of the PC games; better audio level control; fewer wireless problems.
    nackles

  • I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

    I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

    Your phrasing is not clear. How do you reboot into Mac OS? /can you describe the process step by step?
    Usually, you should do like this:
    - while in win, restart
    - immediately after chime, press option or alt key
    - wait for 2-3 seconds, you should see the boot options
    - select Mac OS partition
    If you have performed all these steps, and, after choosing Mac OS partition, you cannot boot into Mac OS, then your system is corrupt and should be reinstalled.

  • Need to Re-install Windows on Mac with boot camp

    I purchased a Mac Pro from someone about 6 months ago that already had a 2nd drive with Boot Camp and Windows XP Pro running on it. Today for the first time when I booted into Windows, I got an error message saying that I "may be a victim of software counterfiting" and that my version of Windows is not an authorized version in my region.
    I have an a genuine Windows XP Pro disc with seriel that I want to now re-install over the bad version. The problem is when I try to run the CD for install, I get an error message stating that I cannot install from the CD because the version of Windows I am currently running is newer than that on the CD.
    So my question is, how do I uninstall the bad version of Windows and re-install the version off the CD? I know I will lose my files and programs but everything is backed up and I will reinstall everything when I get back up and running.
    Thanks for the help!!

    You can format from Windows CD if that is what you mean by "windows side."
    Updates are usually done while boot in the OS you want to 'upgrade' while custom is only done booted from other media.
    With a Mac Pro you could easily install in many different ways than if you only had a laptop or imac.
    But you can't "pick yourself up by your own bootstraps."
    I don't even like upgrade of SL while booted in Mac OS.
    If it was my Mac I'd install Windows 7 and make better use of your hardware and the performance afforded.

  • Can I install Windows 7 with boot camp on my computer, but install all my PC games for it on an external hardrive?

    I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
    On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, would USB 3.0 be ok, or would thunderbolt be a better option (hoping its USB)
    Thank you

    you will be fine and either are more than enough for even an SSD.
    NTFS of course.
    Might look thru Google to see if anyone has managed to boot Windows from Thunderbolt, I think someone managed after install and then made a restore image and placed on Tb storage device.

  • Is SSD partitioning with boot camp stable and recommended?

    Is SSD partitioning with boot camp stable and recommended?

    The OS as already stated does not know the difference. The SSD will perform as it does with any operating system. SSDs can be partitioned as can HDDs.
    My Bootcamp partition is running exactly like it did on my HDD only faster. I have not experienced any issues with the Bootcamp partition or the SSD.

  • Can I install Windows 7 with boot camp, but install all my PC games for it on an external hardrive?

    I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
    On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, which would allow for a faster gameplay, USB 3.0 or Thunderbolt? as fast gameplay is important
    Thank you

    How to move steam to another drive: 
    Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
    Move the steam folder over to the secondary drive you want it on
    Open the "steam.exe" and it will reconfigure steam
    Log in and BAM! All your games are recognized
    Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
    Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
    Run Steam Mover and have it move the game to that location and you are done!
    Now go play the games you want!
    How to have steam on the SSD while having the games on either the SSD or HDD: 
    Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
    Have the "steam.exe" to a folder made on the C:\ drive (C:\Users\Sean\Steam)
    Have the "steamapps" folder on the HDD you want to store your games (D:\User\Program Files\Steam\steamapps)
    Make a junction from the "steamapps" folder to the SSD folder with the "steam.exe" in it
    Open the "steam.exe" and it will reconfigure steam
    Logged in and BAM! All your games are recognized and steam is on the SSD and the games on the other drive.
    Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
    Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
    Run Steam Mover and have it move the game to that location and you are done!
    Now go play the games you want!

  • Intel Iris Pro and Boot Camp Gaming?

    So I'm just wondering how the Intel Iris Pro, and Boot Camp Gaming go together? I just got a 15inch Mac Book Pro with:
    2.0GHz quad-core Intel Core i7
    Turbo Boost up to 3.2GHz
    8GB 1600MHz memory
    256GB PCIe-based flash storage
    Intel Iris Pro Graphics
    My question is, can this Macbook run games, (or just Star Wars the Old Republic), in max settings in Boot Camp?

    I am assuming this is a custom-built dust prevention solution, yes?
    Anyways, I received my replacement SuperDrive and just realized that due to Windows and Mac's limitations in regards to hard drives larger than 2.2 TB, I can't have any of my 3TB drives with both OS X and Windows without having at least two separate HFS partitions on them since the Windows partition must be in the fourth partition, requiring OS X to be in partition 2, Recovery in partition 3, and the combined size of these first four partitions must be under 2.2 TB.
    At least that's my understanding.  I currently have three 3 TB drives and one 1 TB drive (which contains Windows XP and 7 only).
    I'm not really not sure if Windows has to be in the fourth partition because as I mentioned, my 1 TB drive has EFI in partition 1, Windows XP in partition 2, and Windows 7 in partition 3.  I have OS 10.9 on one 3 TB drive, OS 10.7 on the second 3 TB drive, and no OS on the third 3 TB drive.  I would prefer to install Windows 8 on that third 3 TB drive and yet have only one HFS partition because my desktop is already seemingly over-crowded with all the internal drives and partitions it has (I also have a 500GB SSD drive which is my 10.10 boot volume, plugged into one of the two unused SATA motherboard ports).
    My plan is to first determine if I can now break the 1 TB drive barrier I ran into before and install two Windows OSs on a 2 TB drive (technically, I am going to clone my 1 TB Windows partitions onto the 2 TB drive).  Next, I will attempt to partition a 3 TB drive with Windows 8 in partition 2 and HFS in partition 3.

  • Mac Notebook - Install Windows 7 with Boot Camp

    The DVD drive is broken so I am not able to install Windows 7 using boot camp.  I created a few bootable Windows 7 USB drives and while the Mac is reading the drive, when I attempt have boot camp use this flash drive to install Windows 7, it keeps giving me an error that the Windows 7 CD is not in the DVD drive.  It's looking for the Windows 7 installation CD in the DVD drive. 
    How do I get around this?  I think I created the bootable USB drvie with Windows 7 correctly but it's still not working.  Are there other workarounds I can do such as download the ISO file to the Mac's desktop and use boot camp to install Windows?
    Thanks.

    You didn't mention which OS X version you have. Not every Mac or every version of OS X or every version of Boot Camp supports installing every version of Windows from an ISO image.
    Boot Camp 5.1: Frequently asked questions - Apple Support
    Depending upon the age and parts availability of your Mac, it might be less expensive to have it repaired, or to purchase an external DVD drive. No guarantee that Boot Camp will 'see' the external DVD, with the internal DVD still connected, however.
    If Boot Camp on your Mac does not support an ISO image, and your Mac DOES support the minimum requirements to run a recent version of Parallels (7 or newer), Parallels is capable of installing a Windows virtual machine from a Windows ISO image.  Windows performance under Boot Camp is likely much better than Windows running as a virtual machine under Parallels and OS X. The most recent version of Parallels is always available for a short-duration free trial: http://www.parallels.com You still need a valid Windows license to complete even a trial installation. Older versions of Parallels (prior to version 9) will not run under OS X 10.10 Yosemite. Parallels needs to be set to look for the correct ISO image location, rather than a DVD.

  • HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

    Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
    P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
    my bootcamp version in windows 7 is 2.1..

    Uninstall 2.x totally
    Use CCleaner Registry tool
    Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
    BC 2.2 was XP and Vista only

  • Need help with Boot Camp and Win 7

    I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp.  I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
    I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1.  That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
    Thanks.
    Mike

    Mike,
    I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
    https://discussions.apple.com/community/windows_software/boot_camp
    Roger

  • Windows XP Pro - 2 GB RAM limit with Boot Camp

    Hello,
    I have a MacPro running windows XP Professional, have Boot Camp 2.1 installed, and my computer only sees 2 gb of RAM when I have 4gb RAM installed. OSX sees all 4 gb. I am very frustrated because many of the applications I use only run in Windows. As I know this is an outstanding issue upon further research, has anyone found a way to amend this (aside from switching to Vista 64) or know if Apple is planning to fix this issue? I fear that Apple's intentionally done this
    which makes it even more infuriating. This is NOT a Windows issue; we have other machines running XP with 4 GB RAM just fine, which leads me to believe that its a problem with Boot Camp or Apple's EFI (Bios).
    Thank you in advance for your input !

    Hi,
    it's a hard- and a software problem as well.
    Since 32-bit Windows has a limited range of adress space (4GB) to use for harware (PCI-E) extensions to use, the avaiable memory to use is diminishing the more expansion slots there are.
    With the Mac Pros 4 PCI-E slots which reserve their needed adress range whether they are in use or not, this leads to an avaiable memory of 2GB.
    Since 64-bit Windows has not the 4GB limitation, therefor the PCI-E adress ranges do not delimited the amount of useable memory.
    XP-64bit would also do this trick, but is not supported by Apple.
    Regards
    Stefan

  • Windows 7 professional 64 Bit on MacBook Pro Retina 15 with Boot Camp ?

    Hallo guys, i have a big problem with installing Windows 7 professional 64 Bit on my MacBook Pro Retina 15 with Boot Camp. No matter what i try i get a black screen after partitioning or get a message like " No bootable disk" or  " No System Disk availabe".
    My Mac has : OS X version 10.8.2, 16 GB RAM, 512 GB memory, 2.6 GHz Intel i7 and is only a week old
    My Boot Camp is version 5.0.1
    My Windows InstallingDVD is one year old now, i needed it to build a PC last year, hope that doesnt make a difference, its a full version, so not just for upgrading.
    From what i saw in the apple support it should work on my macbook. I hope someone can help me.
    Thanks in advance.

    Ok, problem solved. I looked a bit more here in the questions and there was the answer and its quite simple.
    Somehow an USB-stick makes problems while Windows wants to install, i dont know why. So i just made everything over DVDs and now everything works fine.

  • I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).

    I need to know which update(s) I can apply to help stabalize the system.

    Typing the body of the thread message in the title, huh? -)
    I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).
    Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
    Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out.  --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
    You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
    I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 5.0 Drivers
    http://support.apple.com/kb/DL1638
    Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
    Yes, you can download the Boot Camp 5 Support Software here.
    http://support.apple.com/kb/DL1638
    How do I use the Boot Camp 5 Support Software I downloaded from the web page?
    The download file is a .zip file. Double click it to uncompress it.
    Double-click the Boot Camp disk image.
    Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
    Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
    Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
    When your system restarts your Windows 8 installation is done.
    Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
    How do I format USB media to the FAT file system?
    Use Disk Utility to format a disk to use with a Windows computer. Here's how:
    Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
    Open Disk Utility.
    Select the disk you want to format for use with Windows computers.
    Click Erase, and choose one of the following from the Format pop-up menu:
    If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
    If the size of the disk is over 32 GB, choose ExFAT.
    Type a name for the disk. The maximum length is 11 characters.
    Click the Erase button and then click Erase again.
    Which versions of Windows are supported with Boot Camp 5?
    64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

Maybe you are looking for

  • Podcasts no longer appearing on recently added playlish

    My podcasts used to automatically appear on the recently added playlist. then something happened and my itunes was cleared. I added all the songs etc back on to my ipod but now the podcasts no longer appeared on the recently added playlist like they

  • Facing Master Pages, how do I make them reassign themselves to left or right when I add an odd # of pages?

    I've been designing a travel journal & photo book series, and my process is that I have Master Pages A-D, facing. I'll put in all the text (Masters B, Left and Right), then I go back through and insert the photo pages between the correct dates. This

  • Resend XI Message RWD Status as System Error

    Hi All, The Message failed is due to FTP connection,  In SXMB_Moni the status of the message was succesfully processed. Where as when i check in Runtime Workbench, the status shows as "System Error" and Adapter Engine Status says the same as connecti

  • Safari 4 appearing the same as Safari 3!!!

    I have download Safari 4, but when I launch the program it appears that it is still the old version of Safari. I don't have the option of "cover view" where you can flip through pages like you would with an itunes album library. I do not have a visua

  • BPM Performance tuning

    Hi, I have a synchronous BPM that has 1.receive (open s/a bridge) 2.transform 3.sync send 4.transform 5.sync send 6.transform 7.send (close s/a bridge) working (except for some merge issues in step 4). The BPM takes too long (up to a minute) to execu